Changed Attributes

[George Innocent]

The configured user with the stated attributes:

steve  Cleartext-Password := "testing"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 192.168.1.2,
Framed-IP-Netmask = 255.255.255.0,
Alc-IPsec-Interface = private_ipsec,
Alc-IPsec-SA-Lifetime = 1200,
Alc-IPsec-SA-Encr-Algorithm = aes128,
Alc-IPsec-SA-Auth-Algorithm = sha1,

Error received on running radtest remains same.

But when i comment the attributes the radtest is successful


On 24 June 2013 19:55, <A.L.M.Buxey at lboro.ac.uk> wrote:

> Hi,
>
> >    I am creating attributes for the user using the scripts below but on
> >    running the radtest i get the failure attributes ; which seems to have
> >    changed. I am using Freeradius 2.1.0 .
> >
> >    "user1test" Auth-Type := Local, User-Password == "testpassword"
> >
> >                    Framed-IP-Address = 172.162.3.33,
> >
> >                   Framed-IP-Netmask = 255.255.255.0,
> >
> >                    Alc-Primary-Dns = 4.4.2.2,
> >
> >                    Alc-Primary-Nbns = 8.8.4.4,
> >
> >                    Alc-IPsec-Serv-Id = 199920,
> >
> >                    Alc-IPsec-Interface = public_ipsec,
> >
> >                    Alc-IPsec-SA-Lifetime = 1200,
> >
> >                    Alc-IPsec-SA-Encr-Algorithm = aes128,
> >
> >                    Alc-IPsec-SA-Auth-Algorithm = sha1
>
> 1) its Cleartext-Password :=     NOT User-Password ==
>
> 2) formatting is VERY important...I hope you dont have blank lines between
> each entry
>
> 3) ensure that these attributes that you are using are in a dictionary
> file and that the dictionary file is being read by the server when it
> starts
>
> alan
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-- 
Regards:
George Innocent.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20130624/d1ecaea6/attachment-0001.html>