Radius Issue, No response from server

[Rishabh.Shukla]

Hi, 

Thank you for your reply. I would like to highlight that I have checked that the switch and the radius server can ping each other. Moreover, they are on the same network and the routing also works. Hence, to me it does not seem like a network issue. 

I would greatly appreciate any further help in this regard. 

Thanks Again. 


------------------------------------------------------------------------------------------- 
Best Regards, 
Rishabh 


On 2/12/2014 12:06 PM, Rishabh.Shukla wrote: 



----- Forwarded Message -----
From: "HCC Mailing Lists" <hcc.lists at gmail.com> To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org> Sent: Monday, February 10, 2014 8:25:59 PM
Subject: RE: Radius Issue, No response from server

I may be stating the obvious, but since you have done the
configuration perfectly and the packets are not reaching the RADIUS
server you might check the configuration of the switch and the network
to make sure they can reach each other. 

<blockquote>

-----Original Message-----
From: freeradius-users- bounces+hcc.lists=gmail.com at lists.freeradius.org [ mailto:freeradius - users-bounces+hcc.lists=gmail.com at lists.freeradius.org ] On Behalf Of
Rishabh.Shukla
Sent: Monday, February 10, 2014 09:11
To: freeradius-users at lists.freeradius.org Cc: Hiren Patel; Ronak Shah
Subject: Radius Issue, No response from server

Hello,

I have deployed radius server + daloradius + MySQL in centos 6 and 



all 

<blockquote>

configuration is done perfectly. I have added HP ProCurve switch 

</blockquote>

3400 

<blockquote>

CL as my NAS for sending authentication requests.  The scenarios is
this: the server is responding and accepting the packets locally but
when I try to authenticate through the HP ProCurve switch the server
does not respond.

I have also stopped the iptables services still radius server is not
listening and during debug we found that the request is not even
reaching radius server and moreover I am not getting any error
message at all.

I will be grateful if anybody can help me out to overcome this 

</blockquote>

problem. 

<blockquote>

Thanks and regards
Rishabh.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html 

</blockquote>

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html 

</blockquote>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20140212/c717deb8/attachment-0001.html>