Virtual server can't set reply attributes
Paul
ensoniqpb at gmail.com
Fri Sep 5 11:19:31 CEST 2014
Hi,
My configuration include two local virtual servers for two differnt
realms. Everything was fine on freeradius 2.2.5.
Now I try to move configuration to the release 3 (3.0.4 rc2).
I have a problem with attributes set on the local virual server.
These attributes found in the SQL, but not returned to the NAS with
Access-Accept. (debug output below)
User 'test1' has own attribute in the radreply SQL table:
SELECT * FROM radreply WHERE username = 'test1';
+------+----------+--------------+----+------------------------------------------------+
| id | username | attribute | op | value
|
+------+----------+--------------+----+------------------------------------------------+
| 8880 | test1 | Cisco-AVPair | += | "Cisco-AVPair +=
"ip:inacl=ACL_VIRT_SECURE_IN" |
+------+----------+--------------+----+------------------------------------------------+
Configuration files:
proxy.conf:
---
proxy server {
default_fallback = no
}
realm NULL {
virtual_server = srv_null
}
realm nofilter {
virtual_server = srv_nofilter
}
---
/sites-enabled/srv_default:
---
server default {
listen {
type = auth
ipaddr = *
}
listen {
ipaddr = *
port = 0
type = acct
}
authorize {
preprocess
suffix
}
authenticate {
}
preacct {
preprocess
suffix
}
accounting {
}
session {
}
post-auth {
Post-Auth-Type REJECT {
attr_filter.access_reject
}
}
pre-proxy {
}
post-proxy {
}
}
/sites-enabled/srv_null:
---
#realm NULL
server srv_null{
authorize {
preprocess
chap
files
sql
expiration
logintime
}
authenticate {
Auth-Type CHAP {
chap
}
}
preacct {
preprocess
acct_unique
files
}
accounting {
sql
attr_filter.accounting_response
}
session {
}
post-auth {
}
pre-proxy {
}
post-proxy {
}
}
---
Debug:
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-unknown-linux-gnu,
built on Aug 25 2014 at 21:38:35
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file
/usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
OPTIMIZING no yes --> FALSE
OPTIMIZING no yes --> FALSE
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/srv_default
including configuration file /usr/local/etc/raddb/sites-enabled/srv_null
including configuration file /usr/local/etc/raddb/sites-enabled/srv_nofilter
main {
security {
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
realm NULL {
virtual_server = srv_null
}
realm nofilter {
virtual_server = srv_nofilter
}
radiusd: #### Loading Clients ####
client local {
ipv4addr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
shortname = "localtest"
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client er3 {
ipv4addr = x.x.53.3
require_message_authenticator = no
secret = <<< secret >>>
shortname = "c7200"
nas_type = "cisco"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client er4 {
ipv4addr = x.x.53.4
require_message_authenticator = no
secret = <<< secret >>>
shortname = "asr1001"
nas_type = "cisco"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client test_mt {
ipv4addr = x.x.54.38
require_message_authenticator = no
secret = <<< secret >>>
shortname = "RB2011"
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_always
# Instantiating module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file
/usr/local/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Instantiating module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
detail {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_digest
# Instantiating module "digest" from file
/usr/local/etc/raddb/mods-enabled/digest
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 1024
}
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
rlm_eap (EAP): Ignoring EAP method tls because we do not have OpenSSL support
rlm_eap (EAP): Ignoring EAP method ttls because we do not have OpenSSL support
rlm_eap (EAP): Ignoring EAP method peap because we do not have OpenSSL support
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Loaded module rlm_exec
# Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Instantiating module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
}
# Loaded module rlm_files
# Instantiating module "files" from file
/usr/local/etc/raddb/mods-enabled/files
files {
filename = "/usr/local/etc/raddb/mods-config/files/authorize"
usersfile = "/usr/local/etc/raddb/mods-config/files/authorize"
acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
compat = "cistron"
}
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
[/usr/local/etc/raddb/mods-config/files/authorize]:181 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:188 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:195 Cistron
compatibility checks for entry DEFAULT ...
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
[/usr/local/etc/raddb/mods-config/files/authorize]:181 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:188 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:195 Cistron
compatibility checks for entry DEFAULT ...
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
# Loaded module rlm_linelog
# Instantiating module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog {
filename = "/usr/local/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{Packet-Type}:-default}"
}
# Instantiating module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/usr/local/var/log/radius/linelog-accounting"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Instantiating module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Instantiating module "ntlm_auth" from file
/usr/local/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file
/usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Instantiating module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file
/usr/local/etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Instantiating module "sradutmp" from file
/usr/local/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/usr/local/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
# Loaded module rlm_unpack
# Instantiating module "unpack" from file
/usr/local/etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
# Loaded module rlm_sql
# Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "x.x.52.142"
port = "3306"
login = "radius"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = no
delete_stale_sessions = yes
sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret,
server FROM nas"
authorize_check_query = "SELECT id, username, attribute,
value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}'
ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute,
value, op FROM radreply WHERE username = BINARY '%{SQL-User-Name}'
ORDER BY id"
authorize_group_check_query = "SELECT id, groupname,
attribute, Value, op FROM radgroupcheck WHERE groupname =
'%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname,
attribute, value, op FROM radgroupreply WHERE groupname =
'%{Sql-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup
WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid,
username, nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
acctstoptime IS NULL"
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
}
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
}
post-auth {
reference = ".query"
}
mysql {
tls {
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 4
max = 32
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 1
spread = no
}
rlm_sql (sql): Opening additional connection (0)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (1)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (2)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (3)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (4)
rlm_sql_mysql: Starting connect to MySQL server
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/srv_default
# Loading authorize {...}
# Loading preacct {...}
# Loading post-auth {...}
} # server default
server srv_null { # from file /usr/local/etc/raddb/sites-enabled/srv_null
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
} # server srv_null
server srv_nofilter { # from file
/usr/local/etc/raddb/sites-enabled/srv_nofilter
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
} # server srv_nofilter
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Ready to process requests
Received Access-Request Id 38 from x.x.53.4:1645 to x.x.52.133:1812 length 121
Framed-Protocol = PPP
User-Name = 'test1'
CHAP-Password = 0x01c53d540bddb15b80873d70e7b797de19
Calling-Station-Id = '0024.c435.f7e4'
NAS-Port-Type = Ethernet
NAS-Port = 33554632
NAS-Port-Id = '0/0/2/200'
Connect-Info = 'POL_Vlan200_500M'
Service-Type = Framed-User
NAS-IP-Address = x.x.53.4
(0) Received Access-Request packet from host x.x.53.4 port 1645,
id=38, length=121
(0) Framed-Protocol = PPP
(0) User-Name = 'test1'
(0) CHAP-Password = 0x01c53d540bddb15b80873d70e7b797de19
(0) Calling-Station-Id = '0024.c435.f7e4'
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 33554632
(0) NAS-Port-Id = '0/0/2/200'
(0) Connect-Info = 'POL_Vlan200_500M'
(0) Service-Type = Framed-User
(0) NAS-IP-Address = x.x.53.4
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/srv_default
(0) authorize {
(0) [preprocess] = ok
(0) suffix : Checking for suffix after "@"
(0) suffix : No '@' in User-Name = "test1", looking up realm NULL
(0) suffix : Found realm "NULL"
(0) suffix : Adding Stripped-User-Name = "test1"
(0) suffix : Adding Realm = "NULL"
(0) suffix : Proxying request from user test1 to realm NULL
(0) suffix : Preparing to proxy authentication request to realm "NULL"
(0) [suffix] = updated
(0) } # authorize = updated
Proxying to virtual server srv_null
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/srv_null
(0) authorize {
(0) [preprocess] = ok
(0) chap : Setting 'Auth-Type := CHAP'
(0) [chap] = ok
(0) files : users: Matched entry DEFAULT at line 181
(0) [files] = ok
(0) sql : EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}
(0) sql : --> test1
(0) sql : SQL-User-Name set to 'test1'
rlm_sql (sql): Reserved connection (4)
(0) sql : EXPAND SELECT id, username, attribute, value, op FROM
radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id
(0) sql : --> SELECT id, username, attribute, value, op FROM
radcheck WHERE username = BINARY 'test1' ORDER BY id
rlm_sql (sql): Executing query: 'SELECT id, username, attribute,
value, op FROM radcheck WHERE username = BINARY 'test1' ORDER BY id'
(0) sql : User found in radcheck table
(0) sql : Check items matched
(0) sql : EXPAND SELECT id, username, attribute, value, op FROM
radreply WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id
(0) sql : --> SELECT id, username, attribute, value, op FROM
radreply WHERE username = BINARY 'test1' ORDER BY id
rlm_sql (sql): Executing query: 'SELECT id, username, attribute,
value, op FROM radreply WHERE username = BINARY 'test1' ORDER BY id'
(0) sql : User found in radreply table
(0) sql : EXPAND SELECT groupname FROM radusergroup WHERE username =
BINARY '%{SQL-User-Name}' ORDER BY priority
(0) sql : --> SELECT groupname FROM radusergroup WHERE username =
BINARY 'test1' ORDER BY priority
rlm_sql (sql): Executing query: 'SELECT groupname FROM radusergroup
WHERE username = BINARY 'test1' ORDER BY priority'
(0) sql : User not found in any groups
rlm_sql (sql): Released connection (4)
rlm_sql (sql): Closing connection (0), from 1 unused connections
rlm_sql_mysql: Socket destructor called, closing socket
(0) [sql] = ok
(0) [expiration] = noop
(0) [logintime] = noop
(0) } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/srv_null
(0) Auth-Type CHAP {
(0) chap : Login attempt by "test1" with CHAP password
(0) chap : Comparing with "known good" Cleartext-Password
(0) chap : CHAP user "test1" authenticated successfully
(0) [chap] = ok
(0) } # Auth-Type CHAP = ok
(0) Found Auth-Type = Accept
(0) Auth-Type = Accept, accepting the user
(0) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/srv_default
(0) Sending Access-Accept packet to host x.x.53.4 port 1645, id=38, length=0
Sending Access-Accept Id 38 from x.x.52.133:1812 to x.x.53.4:1645
(0) Finished request
Waking up in 0.3 seconds.
(...)
--
Please help. Thx,
Paul
More information about the Freeradius-Users
mailing list