acct_unique problem
Viana
freeradius at radius.net.br
Tue Feb 9 08:26:15 CET 2016
Hello!
“-r: not found” and “sh: 0: Illegal option –r” was an error with snmpwalk. I compiled FreeRadius without SNMP installed.
So, I installed SNMP. The “-r” error disappeared, but unfortunately the same error still occurs:
(0) Received Access-Request Id 100 from 192.168.0.1:55429 to 192.168.0.98:1812 length 144
(0) Service-Type = Framed-User
(0) Framed-Protocol = PPP
(0) NAS-Port = 15731333
(0) NAS-Port-Type = Ethernet
(0) User-Name = "test"
(0) Calling-Station-Id = "C0:4A:00:87:C6:D9"
(0) Called-Station-Id = "service1"
(0) NAS-Port-Id = "bridge1"
(0) CHAP-Challenge = 0xbd3a9c8b7601f363a824eaac74bd8e10
(0) CHAP-Password = 0x018481e984212401f879eae27379964cf4
(0) NAS-Identifier = "Main_Router"
(0) NAS-IP-Address = 192.168.0.1
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) chap: &control:Auth-Type := CHAP
(0) [chap] = ok
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) files: users: Matched entry DEFAULT at line 181
(0) [files] = ok
(0) sql: EXPAND %{User-Name}
(0) sql: --> test
(0) sql: SQL-User-Name set to 'test'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql: Cleartext-Password := "123456"
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: User found in the group table
(0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Conditional check items matched
(0) sql: Group "1": Merging assignment check items
(0) sql: Simultaneous-Use := 1
(0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Merging reply items
rlm_sql (sql): Released connection (1)
rlm_sql (sql): Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
(0) [sql] = ok
(0) [expiration] = noop
(0) [logintime] = noop
(0) pap: WARNING: Auth-Type already set. Not setting to PAP
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0) Auth-Type CHAP {
(0) chap: Comparing with "known good" Cleartext-Password
(0) chap: CHAP user "test" authenticated successfully
(0) [chap] = ok
(0) } # Auth-Type CHAP = ok
(0) # Executing section session from file /usr/local/etc/raddb/sites-enabled/default
(0) session {
(0) sql: EXPAND %{User-Name}
(0) sql: --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql: --> SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
rlm_sql (sql): Reserved connection (2)
(0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: EXPAND SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql: --> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
(0) preacct {
(0) [preprocess] = ok
(0) policy acct_unique {
(0) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) {
(0) EXPAND %{string:Class}
(0) -->
(0) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE
(0) else {
(0) update request {
(0) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(0) --> aeaca7a4ec4f29c5b435e1e56cd6d541
(0) &Acct-Unique-Session-Id := aeaca7a4ec4f29c5b435e1e56cd6d541
(0) } # update request = noop
(0) EXPAND %{User-Name}
(0) --> test
(0) EXPAND %{Acct-Session-ID}
(0) --> 81900848
(0) EXPAND %{NAS-IPv6-Address}
(0) -->
(0) EXPAND %{NAS-IP-Address}
(0) --> 192.168.0.1
(0) EXPAND %{NAS-Identifier}
(0) -->
(0) EXPAND %{NAS-Port-ID}
(0) -->
(0) EXPAND %{NAS-Port}
(0) --> 0
(0) } # else = noop
(0) } # policy acct_unique = noop
back to square one...
Please, need some help.
Below is my entire log (no more “-r” errors):
Server was built with:
accounting : yes
authentication : yes
ascend-binary-attributes : yes
coa : yes
control-socket : yes
detail : yes
dhcp : yes
dynamic-clients : yes
osfc2 : no
proxy : yes
regex-pcre : no
regex-posix : yes
regex-posix-extended : yes
session-management : yes
stats : yes
tcp : yes
threads : yes
tls : yes
unlang : yes
vmps : yes
developer : no
Server core libs:
freeradius-server : 3.0.11
talloc : 2.0.*
ssl : 1.0.1p release
Endianness:
little
Compilation flags:
cppflags : -isystem /usr/local/include/
cflags : -I/root/freeradius/freeradius-server-3.0.11 -I/root/freeradius/freeradius-server-3.0.11/src -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/autoconf.h -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/build.h -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/features.h -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
ldflags : -L/usr/local/lib -Wl,-rpath,/usr/local/lib
libs : -lcrypto -lssl -ltalloc -lexecinfo -lpthread -lreadline
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
# Creating Auth-Type = eap
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
detail {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
# Loaded module rlm_dhcp
# Loading module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_exec
# Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
files {
filename = "/usr/local/etc/raddb/mods-config/files/authorize"
acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
linelog {
filename = "/usr/local/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/usr/local/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/usr/local/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
# Loaded module rlm_sql
# Loading module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = 3306
login = "root"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
instantiate {
}
# Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
ca_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/usr/local/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.6.25
mysql {
tls {
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 192.168.0.1 (123231) to global clients list
rlm_sql (192.168.0.1): Client "123231" (sql) added
rlm_sql (sql): Released connection (0)
rlm_sql (sql): Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 33259
Listening on proxy address :: port 26258
Ready to process requests
(0) Received Access-Request Id 100 from 192.168.0.1:55429 to 192.168.0.98:1812 length 144
(0) Service-Type = Framed-User
(0) Framed-Protocol = PPP
(0) NAS-Port = 15731333
(0) NAS-Port-Type = Ethernet
(0) User-Name = "test"
(0) Calling-Station-Id = "C0:4A:00:87:C6:D9"
(0) Called-Station-Id = "service1"
(0) NAS-Port-Id = "bridge1"
(0) CHAP-Challenge = 0xbd3a9c8b7601f363a824eaac74bd8e10
(0) CHAP-Password = 0x018481e984212401f879eae27379964cf4
(0) NAS-Identifier = "Main_Router"
(0) NAS-IP-Address = 192.168.0.1
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) chap: &control:Auth-Type := CHAP
(0) [chap] = ok
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) files: users: Matched entry DEFAULT at line 181
(0) [files] = ok
(0) sql: EXPAND %{User-Name}
(0) sql: --> test
(0) sql: SQL-User-Name set to 'test'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql: Cleartext-Password := "123456"
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: User found in the group table
(0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Conditional check items matched
(0) sql: Group "1": Merging assignment check items
(0) sql: Simultaneous-Use := 1
(0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Merging reply items
rlm_sql (sql): Released connection (1)
rlm_sql (sql): Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
(0) [sql] = ok
(0) [expiration] = noop
(0) [logintime] = noop
(0) pap: WARNING: Auth-Type already set. Not setting to PAP
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0) Auth-Type CHAP {
(0) chap: Comparing with "known good" Cleartext-Password
(0) chap: CHAP user "test" authenticated successfully
(0) [chap] = ok
(0) } # Auth-Type CHAP = ok
(0) # Executing section session from file /usr/local/etc/raddb/sites-enabled/default
(0) session {
(0) sql: EXPAND %{User-Name}
(0) sql: --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql: --> SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
rlm_sql (sql): Reserved connection (2)
(0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: EXPAND SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql: --> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
(0) preacct {
(0) [preprocess] = ok
(0) policy acct_unique {
(0) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) {
(0) EXPAND %{string:Class}
(0) -->
(0) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE
(0) else {
(0) update request {
(0) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(0) --> aeaca7a4ec4f29c5b435e1e56cd6d541
(0) &Acct-Unique-Session-Id := aeaca7a4ec4f29c5b435e1e56cd6d541
(0) } # update request = noop
(0) EXPAND %{User-Name}
(0) --> test
(0) EXPAND %{Acct-Session-ID}
(0) --> 81900848
(0) EXPAND %{NAS-IPv6-Address}
(0) -->
(0) EXPAND %{NAS-IP-Address}
(0) --> 192.168.0.1
(0) EXPAND %{NAS-Identifier}
(0) -->
(0) EXPAND %{NAS-Port-ID}
(0) -->
(0) EXPAND %{NAS-Port}
(0) --> 0
(0) } # else = noop
(0) } # policy acct_unique = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) [files] = noop
(0) } # preacct = ok
(0) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
(0) accounting {
(0) detail: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(0) detail: --> /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(0) detail: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(0) detail: EXPAND %t
(0) detail: --> Tue Feb 9 05:09:41 2016
(0) [detail] = ok
(0) [unix] = ok
(0) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query}
(0) sql: --> type.stop.query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (3)
(0) sql: EXPAND %{User-Name}
(0) sql: --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'
(0) sql: --> UPDATE radacct SET acctstoptime = FROM_UNIXTIME(1455001781), acctsessiontime = 0, acctinputoctets = '0' << 32 | '0', acctoutputoctets = '0' << 32 | '0', acctterminatecause = '', connectinfo_stop = '' WHERE AcctUniqueId = 'aeaca7a4ec4f29c5b435e1e56cd6d541'
(0) sql: Executing query: UPDATE radacct SET acctstoptime = FROM_UNIXTIME(1455001781), acctsessiontime = 0, acctinputoctets = '0' << 32 | '0', acctoutputoctets = '0' << 32 | '0', acctterminatecause = '', connectinfo_stop = '' WHERE AcctUniqueId = 'aeaca7a4ec4f29c5b435e1e56cd6d541'
rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0
(0) sql: SQL query returned: success
(0) sql: 0 record(s) updated
(0) sql: Trying next query...
(0) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), %{%{Acct-Session-Time}:-NULL}, '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')
(0) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('81900848', 'aeaca7a4ec4f29c5b435e1e56cd6d541', 'test', '', '192.168.0.1', '0', '', FROM_UNIXTIME(1455001781 - 0), FROM_UNIXTIME(1455001781), FROM_UNIXTIME(1455001781), 0, '', '', '', '0' << 32 | '0', '0' << 32 | '0', '', '', '', 'Framed-User', 'PPP', '')
(0) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('81900848', 'aeaca7a4ec4f29c5b435e1e56cd6d541', 'test', '', '192.168.0.1', '0', '', FROM_UNIXTIME(1455001781 - 0), FROM_UNIXTIME(1455001781), FROM_UNIXTIME(1455001781), 0, '', '', '', '0' << 32 | '0', '0' << 32 | '0', '', '', '', 'Framed-User', 'PPP', '')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (3)
rlm_sql (sql): Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
(0) [sql] = ok
(0) [exec] = noop
(0) attr_filter.accounting_response: EXPAND %{User-Name}
(0) attr_filter.accounting_response: --> test
(0) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(0) [attr_filter.accounting_response] = updated
(0) } # accounting = updated
rlm_sql (sql): Released connection (2)
(0) [sql] = ok
(0) } # session = ok
(0) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
(0) post-auth {
(0) update {
(0) No attributes updated
(0) } # update = noop
(0) sql: EXPAND .query
(0) sql: --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (4)
(0) sql: EXPAND %{User-Name}
(0) sql: --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'test', '0x018481e984212401f879eae27379964cf4', 'Access-Accept', '2016-02-09 05:09:41')
(0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'test', '0x018481e984212401f879eae27379964cf4', 'Access-Accept', '2016-02-09 05:09:41')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (4)
(0) [sql] = ok
(0) [exec] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # post-auth = ok
(0) Sent Access-Accept Id 100 from 192.168.0.98:1812 to 192.168.0.1:55429 length 0
(0) Framed-Protocol = PPP
(0) Framed-Compression = Van-Jacobson-TCP-IP
(0) Finished request
Waking up in 4.9 seconds.
Waking up in 9.9 seconds.
(1) Received Accounting-Request Id 101 from 192.168.0.1:59018 to 192.168.0.98:1813 length 147
(1) Service-Type = Framed-User
(1) Framed-Protocol = PPP
(1) NAS-Port = 15731333
(1) NAS-Port-Type = Ethernet
(1) User-Name = "test"
(1) Calling-Station-Id = "C0:4A:00:87:C6:D9"
(1) Called-Station-Id = "service1"
(1) NAS-Port-Id = "bridge1"
(1) Acct-Session-Id = "81900849"
(1) Framed-IP-Address = 0.0.0.0
(1) Acct-Authentic = RADIUS
(1) Event-Timestamp = "Feb 8 2016 18:48:07 BRST"
(1) Acct-Status-Type = Start
(1) NAS-Identifier = "Main_Router"
(1) Acct-Delay-Time = 0
(1) NAS-IP-Address = 192.168.0.1
(1) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
(1) preacct {
(1) [preprocess] = ok
(1) policy acct_unique {
(1) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) {
(1) EXPAND %{string:Class}
(1) -->
(1) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE
(1) else {
(1) update request {
(1) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(1) --> f7d16a7d01689686f3af959b4c2467af
(1) &Acct-Unique-Session-Id := f7d16a7d01689686f3af959b4c2467af
(1) } # update request = noop
(1) EXPAND %{User-Name}
(1) --> test
(1) EXPAND %{Acct-Session-ID}
(1) --> 81900849
(1) EXPAND %{NAS-IPv6-Address}
(1) -->
(1) EXPAND %{NAS-IP-Address}
(1) --> 192.168.0.1
(1) EXPAND %{NAS-Identifier}
(1) --> Main_Router
(1) EXPAND %{NAS-Port-ID}
(1) --> bridge1
(1) EXPAND %{NAS-Port}
(1) --> 15731333
(1) } # else = noop
(1) } # policy acct_unique = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "test", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) [files] = noop
(1) } # preacct = ok
(1) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
(1) accounting {
(1) detail: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(1) detail: --> /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(1) detail: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(1) detail: EXPAND %t
(1) detail: --> Tue Feb 9 05:09:42 2016
(1) [detail] = ok
(1) [unix] = ok
(1) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query}
(1) sql: --> type.start.query
(1) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (0)
(1) sql: EXPAND %{User-Name}
(1) sql: --> test
(1) sql: SQL-User-Name set to 'test'
(1) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')
(1) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('81900849', 'f7d16a7d01689686f3af959b4c2467af', 'test', '', '192.168.0.1', 'bridge1', 'Ethernet', FROM_UNIXTIME(1454964487), FROM_UNIXTIME(1454964487), NULL, '0', 'RADIUS', '', '', '0', '0', 'service1', 'C0:4A:00:87:C6:D9', '', 'Framed-User', 'PPP', '0.0.0.0')
(1) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('81900849', 'f7d16a7d01689686f3af959b4c2467af', 'test', '', '192.168.0.1', 'bridge1', 'Ethernet', FROM_UNIXTIME(1454964487), FROM_UNIXTIME(1454964487), NULL, '0', 'RADIUS', '', '', '0', '0', 'service1', 'C0:4A:00:87:C6:D9', '', 'Framed-User', 'PPP', '0.0.0.0')
(1) sql: SQL query returned: success
(1) sql: 1 record(s) updated
rlm_sql (sql): Released connection (0)
(1) [sql] = ok
(1) [exec] = noop
(1) attr_filter.accounting_response: EXPAND %{User-Name}
(1) attr_filter.accounting_response: --> test
(1) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(1) [attr_filter.accounting_response] = updated
(1) } # accounting = updated
(1) Sent Accounting-Response Id 101 from 192.168.0.98:1813 to 192.168.0.1:59018 length 0
(1) Finished request
(1) Cleaning up request packet ID 101 with timestamp +10
Waking up in 9.9 seconds.
(0) Cleaning up request packet ID 100 with timestamp +9
Ready to process requests
^C
Best Regards
Fabricio
---
Este email foi escaneado pelo Avast antivírus.
http://www.avast.com
More information about the Freeradius-Users
mailing list