Error sending request: No valid RADIUS responses received
Greg Larkins
gblarkins at yahoo.com
Wed Oct 12 05:31:11 CEST 2016
I have a pfSense box with captive portal using radius authentication. I'm
running freeradius on a Raspberry Pi on the LAN. This works fine and I had
no issues setting up freeradius on the rPi.
I now have a new Orange Pi which I want to set up the same as the Raspberry
Pi. The oPi won't boot off the same image as the rPi so I had to download
armbian for the oPi and reinstall everything from scratch.
Using the oPi as the server, I'm getting authentication errors: "Error
sending request: No valid RADIUS responses received"
I've checked the following configuration files for both pis and they are
identical:
clients.conf
radiusd.conf
sql.conf
users
I have run the server in debug mode and run the output through the
debugging tool (http://networkradius.com/freeradius-debugging/) and there
are a few red lines but they are also present in my working server.
both server debug outputs show this starting at line 150:
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "mysecret"
nastype = "other"
}
There are differences in output but the only one I can see which might be
relevant is the following which is present in my working server but absent
in my non-working server at line 487:
rlm_sql (sql): Read entry
nasname=192.168.225.1,shortname=pfSense,secret=mysecret
rlm_sql (sql): Adding client 192.168.225.1 (pfSense, server=<none>) to
clients list
which would seem to be a show stopper, but I can't figure out where that is
going wrong.
Debug output for the non-working server:
freeradius: FreeRADIUS Version 2.2.5, for host arm-unknown-linux-gnueabihf,
built on Oct 24 2014 at 05:52:01
Copyright (C) 1999-2013 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
For more information about these matters, see the file named COPYRIGHT.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/radrelay
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/dhcp_sqlippool
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/detail.log
including configuration file
/etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/cache
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/sql.conf
including configuration file /etc/freeradius/sql/mysql/dialup.conf
including configuration file /etc/freeradius/sql/mysql/counter.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
allow_vulnerable_openssl = no
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "mysecret"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Creating Auth-Type = digest
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file
/etc/freeradius/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file
/etc/freeradius/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 1024
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/freeradius/huntgroups
reading pairlist file /etc/freeradius/hints
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file
/etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file
/etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
reading pairlist file /etc/freeradius/users
reading pairlist file /etc/freeradius/acct_users
reading pairlist file /etc/freeradius/preproxy_users
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /etc/freeradius/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = ""
login = "root"
password = "rooter"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/var/log/freeradius/sqltrace.sql"
readclients = yes
deletestalesessions = yes
num_sql_socks = 32
lifetime = 0
max_queries = 0
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM
nas"
authorize_check_query = "SELECT id, username, attribute, value,
op FROM radcheck WHERE username =
'%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value,
op FROM radreply WHERE username =
'%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname,
attribute, Value, op FROM radgroupcheck WHERE
groupname = '%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname,
attribute, value, op FROM radgroupreply WHERE
groupname = '%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct
SET acctstoptime = '%S',
acctsessiontime = unix_timestamp('%S')
-
unix_timestamp(acctstarttime), acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
%{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND
nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <=
'%S'"
accounting_update_query = " UPDATE radacct
SET framedipaddress = '%{Framed-IP-Address}',
acctsessiontime = '%{Acct-Session-Time}',
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32
|
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid =
'%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO
radacct (acctsessionid, acctuniqueid,
username, realm, nasipaddress,
nasportid, nasporttype, acctstarttime,
acctsessiontime, acctauthentic, connectinfo_start,
acctinputoctets, acctoutputoctets, calledstationid,
callingstationid, servicetype, framedprotocol,
framedipaddress, acctstartdelay,
xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND),
'%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}'
<< 32 | '%{%{Acct-Output-Octets}:-0}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username,
realm, nasipaddress, nasportid,
nasporttype, acctstarttime, acctstoptime,
acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, acctterminatecause,
servicetype, framedprotocol, framedipaddress,
acctstartdelay, acctstopdelay, xascendsessionsvrkey)
VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0',
'%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct
SET acctstarttime = '%S', acctstartdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_start =
'%{Connect-Info}' WHERE acctsessionid =
'%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
'%{Acct-Session-Time}', acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_stop =
'%{Connect-Info}' WHERE acctsessionid =
'%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO
radacct (acctsessionid, acctuniqueid, username,
realm, nasipaddress, nasportid, nasporttype, acctstarttime,
acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol,
framedipaddress, acctstartdelay, acctstopdelay)
VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL
(%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0})
SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}',
'', '%{Connect-Info}',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}'
<< 32 | '%{%{Acct-Output-Octets}:-0}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM
radusergroup WHERE username = '%{SQL-User-Name}' ORDER
BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid,
username, nasipaddress, nasportid,
framedipaddress, callingstationid,
framedprotocol FROM
radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth
(username, pass, reply, authdate) VALUES
( '%{User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to root at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): starting 5
rlm_sql (sql): Attempting to connect rlm_sql_mysql #5
rlm_sql_mysql: Starting connect to MySQL server for #5
rlm_sql (sql): Connected new DB handle, #5
rlm_sql (sql): starting 6
rlm_sql (sql): Attempting to connect rlm_sql_mysql #6
rlm_sql_mysql: Starting connect to MySQL server for #6
rlm_sql (sql): Connected new DB handle, #6
rlm_sql (sql): starting 7
rlm_sql (sql): Attempting to connect rlm_sql_mysql #7
rlm_sql_mysql: Starting connect to MySQL server for #7
rlm_sql (sql): Connected new DB handle, #7
rlm_sql (sql): starting 8
rlm_sql (sql): Attempting to connect rlm_sql_mysql #8
rlm_sql_mysql: Starting connect to MySQL server for #8
rlm_sql (sql): Connected new DB handle, #8
rlm_sql (sql): starting 9
rlm_sql (sql): Attempting to connect rlm_sql_mysql #9
rlm_sql_mysql: Starting connect to MySQL server for #9
rlm_sql (sql): Connected new DB handle, #9
rlm_sql (sql): starting 10
rlm_sql (sql): Attempting to connect rlm_sql_mysql #10
rlm_sql_mysql: Starting connect to MySQL server for #10
rlm_sql (sql): Connected new DB handle, #10
rlm_sql (sql): starting 11
rlm_sql (sql): Attempting to connect rlm_sql_mysql #11
rlm_sql_mysql: Starting connect to MySQL server for #11
rlm_sql (sql): Connected new DB handle, #11
rlm_sql (sql): starting 12
rlm_sql (sql): Attempting to connect rlm_sql_mysql #12
rlm_sql_mysql: Starting connect to MySQL server for #12
rlm_sql (sql): Connected new DB handle, #12
rlm_sql (sql): starting 13
rlm_sql (sql): Attempting to connect rlm_sql_mysql #13
rlm_sql_mysql: Starting connect to MySQL server for #13
rlm_sql (sql): Connected new DB handle, #13
rlm_sql (sql): starting 14
rlm_sql (sql): Attempting to connect rlm_sql_mysql #14
rlm_sql_mysql: Starting connect to MySQL server for #14
rlm_sql (sql): Connected new DB handle, #14
rlm_sql (sql): starting 15
rlm_sql (sql): Attempting to connect rlm_sql_mysql #15
rlm_sql_mysql: Starting connect to MySQL server for #15
rlm_sql (sql): Connected new DB handle, #15
rlm_sql (sql): starting 16
rlm_sql (sql): Attempting to connect rlm_sql_mysql #16
rlm_sql_mysql: Starting connect to MySQL server for #16
rlm_sql (sql): Connected new DB handle, #16
rlm_sql (sql): starting 17
rlm_sql (sql): Attempting to connect rlm_sql_mysql #17
rlm_sql_mysql: Starting connect to MySQL server for #17
rlm_sql (sql): Connected new DB handle, #17
rlm_sql (sql): starting 18
rlm_sql (sql): Attempting to connect rlm_sql_mysql #18
rlm_sql_mysql: Starting connect to MySQL server for #18
rlm_sql (sql): Connected new DB handle, #18
rlm_sql (sql): starting 19
rlm_sql (sql): Attempting to connect rlm_sql_mysql #19
rlm_sql_mysql: Starting connect to MySQL server for #19
rlm_sql (sql): Connected new DB handle, #19
rlm_sql (sql): starting 20
rlm_sql (sql): Attempting to connect rlm_sql_mysql #20
rlm_sql_mysql: Starting connect to MySQL server for #20
rlm_sql (sql): Connected new DB handle, #20
rlm_sql (sql): starting 21
rlm_sql (sql): Attempting to connect rlm_sql_mysql #21
rlm_sql_mysql: Starting connect to MySQL server for #21
rlm_sql (sql): Connected new DB handle, #21
rlm_sql (sql): starting 22
rlm_sql (sql): Attempting to connect rlm_sql_mysql #22
rlm_sql_mysql: Starting connect to MySQL server for #22
rlm_sql (sql): Connected new DB handle, #22
rlm_sql (sql): starting 23
rlm_sql (sql): Attempting to connect rlm_sql_mysql #23
rlm_sql_mysql: Starting connect to MySQL server for #23
rlm_sql (sql): Connected new DB handle, #23
rlm_sql (sql): starting 24
rlm_sql (sql): Attempting to connect rlm_sql_mysql #24
rlm_sql_mysql: Starting connect to MySQL server for #24
rlm_sql (sql): Connected new DB handle, #24
rlm_sql (sql): starting 25
rlm_sql (sql): Attempting to connect rlm_sql_mysql #25
rlm_sql_mysql: Starting connect to MySQL server for #25
rlm_sql (sql): Connected new DB handle, #25
rlm_sql (sql): starting 26
rlm_sql (sql): Attempting to connect rlm_sql_mysql #26
rlm_sql_mysql: Starting connect to MySQL server for #26
rlm_sql (sql): Connected new DB handle, #26
rlm_sql (sql): starting 27
rlm_sql (sql): Attempting to connect rlm_sql_mysql #27
rlm_sql_mysql: Starting connect to MySQL server for #27
rlm_sql (sql): Connected new DB handle, #27
rlm_sql (sql): starting 28
rlm_sql (sql): Attempting to connect rlm_sql_mysql #28
rlm_sql_mysql: Starting connect to MySQL server for #28
rlm_sql (sql): Connected new DB handle, #28
rlm_sql (sql): starting 29
rlm_sql (sql): Attempting to connect rlm_sql_mysql #29
rlm_sql_mysql: Starting connect to MySQL server for #29
rlm_sql (sql): Connected new DB handle, #29
rlm_sql (sql): starting 30
rlm_sql (sql): Attempting to connect rlm_sql_mysql #30
rlm_sql_mysql: Starting connect to MySQL server for #30
rlm_sql (sql): Connected new DB handle, #30
rlm_sql (sql): starting 31
rlm_sql (sql): Attempting to connect rlm_sql_mysql #31
rlm_sql_mysql: Starting connect to MySQL server for #31
rlm_sql (sql): Connected new DB handle, #31
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserving sql socket id: 31
rlm_sql (sql): Released sql socket id: 31
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file
/etc/freeradius/modules/detail
detail {
detailfile =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/freeradius/attrs.accounting_response
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/etc/freeradius/modules/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/freeradius/attrs.access_reject
} # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
Failed binding to authentication address * port 1812: Address already in use
/etc/freeradius/radiusd.conf[273]: Error binding to port for 0.0.0.0 port
1812
More information about the Freeradius-Users
mailing list