new freeradius setup

[Eero Volotinen]

well, cp -v is not same as ln -s (command) :)

try setting selinux to permissive mode first.

Eero

2017-10-25 21:01 GMT+03:00 Andrew Meyer via Freeradius-Users <
freeradius-users at lists.freeradius.org>:

> Ok, in doing more reading I have made a symbolic link for the default
> config:
> cp -v /etc/raddb/sites-available/default  /etc/raddb/sites-enabled/
>
> It then started to complain about not having the authentication modules.
> So I start to copy those over as well.
>
> I think I'm heading in the right direction.  (Also had to allow freeradius
> through SELinux)
>
> Here is the latest i'm seeing in my logs:
> Wed Oct 25 10:42:09 2017 : Error: rlm_eap_tls: Failed initializing SSL
> context
> Wed Oct 25 10:42:09 2017 : Error: rlm_eap (EAP): Failed to initialise
> rlm_eap_tls
> Wed Oct 25 10:42:09 2017 : Error: /etc/raddb/mods-enabled/eap[14]:
> Instantiation failed for module "eap"
>
>     On Wednesday, October 25, 2017 8:30 AM, Andrew Meyer via
> Freeradius-Users <freeradius-users at lists.freeradius.org> wrote:
>
>
>  Alan,
> My apologies.  Yahoo defaults to Rich Text and there is no way to set the
> default to plain text that I can see.
> However here is my output in plain text.  Hope this is legible now.
>
> So I also added a client config and told it to allow my network to have
> the ability to communicate w/ FreeRADIUS.
> Tue Oct 24 21:17:58 2017 : Auth: (0) Login incorrect (No Auth-Type found:
> rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client
> ASM port 0)
> Tue Oct 24 21:18:04 2017 : Auth: (1) Login incorrect (No Auth-Type found:
> rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client
> ASM port 0)
>
>
>
> On Wednesday, October 25, 2017 5:31 AM, Alan DeKok <
> aland at deployingradius.com> wrote:
>
>
>
>
> > On Oct 24, 2017, at 9:27 PM, Andrew Meyer via Freeradius-Users <
> freeradius-users at lists.freeradius.org> wrote:
> >
> > Ok, I did what you said, I started fresh.
> > The only thing I have put in the /etc/raddb/radiusd.conf is a listen
> directive.  So now in the logs i'm getting this:
> > Tue Oct 24 20:26:54 2017 : Error: Ignoring request to auth address
> 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto
> udpTue Oct 24 20:26:59 2017 : Error: Ignoring request to auth address
> 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto
> udpTue Oct 24 20:27:04 2017 : Error: Ignoring request to auth address
> 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto
> udp]
>
>   You've been told repeatedly to fix your messages so that the contents
> aren't mangled.  Despite that, you're still not following instructions.
>
>   If you don't care enough to post READABLE logs, I don't care to answer
> your questions.
>
>
>   Alan DeKok.
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/
> list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/
> list/users.html
>