Missing error messages in detail log reply files
Fekete Tamás
fektom at gmail.com
Fri Jan 11 12:10:41 CET 2019
> The attribute isn't created in 3.0.13.
Same error in 3.0.17
FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file
/usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file
/usr/local/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loaded module rlm_detail
# Loading module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
detail {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file
/usr/local/etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_exec
# Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
files {
filename = "/usr/local/etc/raddb/mods-config/files/authorize"
acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog {
filename = "/usr/local/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/usr/local/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file
/usr/local/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file
/usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/usr/local/etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file
/usr/local/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/usr/local/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file
/usr/local/etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
instantiate {
}
# Instantiating module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "ok" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file
/usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "eap" from file
/usr/local/etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
ca_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/usr/local/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file
/usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file
/usr/local/etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/usr/local/etc/raddb/sites-enabled/inner-tunnel:331
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 56614
Listening on proxy address :: port 46696
Ready to process requests
(0) Received Access-Request Id 49 from 127.0.0.1:41416 to 127.0.0.1:1812
length 73
(0) User-Name = "bob"
(0) User-Password = "hello"
(0) NAS-IP-Address = 127.0.0.1
(0) NAS-Port = 0
(0) Message-Authenticator = 0x25b5c7c8a68f8c28c636897211e45c44
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) auth_log: EXPAND
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(0) auth_log: --> /usr/local/var/log/radius/radacct/
127.0.0.1/auth-detail-20190111
(0) auth_log:
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20190111
(0) auth_log: EXPAND %t
(0) auth_log: --> Fri Jan 11 11:07:31 2019
(0) [auth_log] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "bob", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) files: users: Matched entry bob at line 87
(0) files: EXPAND Hello, %{User-Name}
(0) files: --> Hello, bob
(0) [files] = ok
(0) [expiration] = noop
(0) [logintime] = noop
(0) [pap] = updated
(0) } # authorize = updated
(0) Found Auth-Type = PAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0) Auth-Type PAP {
(0) pap: Login attempt with password
(0) pap: Comparing with "known good" Cleartext-Password
(0) pap: User authenticated successfully
(0) [pap] = ok
(0) } # Auth-Type PAP = ok
(0) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/default
(0) post-auth {
(0) update {
(0) No attributes updated
(0) } # update = noop
(0) reply_log: EXPAND
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
(0) reply_log: --> /usr/local/var/log/radius/radacct/
127.0.0.1/reply-detail-20190111
(0) reply_log:
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
expands to /usr/local/var/log/radius/radacct/127.0.0.1/reply-detail-20190111
(0) reply_log: EXPAND %t
(0) reply_log: --> Fri Jan 11 11:07:31 2019
(0) [reply_log] = ok
(0) [exec] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # post-auth = ok
(0) Login OK: [bob] (from client localhost port 0)
(0) Sent Access-Accept Id 49 from 127.0.0.1:1812 to 127.0.0.1:41416 length 0
(0) Reply-Message = "Hello, bob"
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 104 from 127.0.0.1:35842 to 127.0.0.1:1812
length 73
(1) User-Name = "bob"
(1) User-Password = "hello2"
(1) NAS-IP-Address = 127.0.0.1
(1) NAS-Port = 0
(1) Message-Authenticator = 0xc88dffafb4b30a14c58fe9a82a66c881
(1) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) auth_log: EXPAND
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(1) auth_log: --> /usr/local/var/log/radius/radacct/
127.0.0.1/auth-detail-20190111
(1) auth_log:
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20190111
(1) auth_log: EXPAND %t
(1) auth_log: --> Fri Jan 11 11:07:34 2019
(1) [auth_log] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "bob", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1) [eap] = noop
(1) files: users: Matched entry bob at line 87
(1) files: EXPAND Hello, %{User-Name}
(1) files: --> Hello, bob
(1) [files] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) [pap] = updated
(1) } # authorize = updated
(1) Found Auth-Type = PAP
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1) Auth-Type PAP {
(1) pap: Login attempt with password
(1) pap: Comparing with "known good" Cleartext-Password
(1) pap: ERROR: Cleartext password does not match "known good" password
(1) pap: Passwords don't match
(1) [pap] = reject
(1) } # Auth-Type PAP = reject
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1) Post-Auth-Type REJECT {
(1) update reply {
(1) No attributes updated
(1) } # update reply = noop
(1) reply_log: EXPAND
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
(1) reply_log: --> /usr/local/var/log/radius/radacct/
127.0.0.1/reply-detail-20190111
(1) reply_log:
/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
expands to /usr/local/var/log/radius/radacct/127.0.0.1/reply-detail-20190111
(1) reply_log: EXPAND %t
(1) reply_log: --> Fri Jan 11 11:07:34 2019
(1) [reply_log] = ok
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject: --> bob
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1) [attr_filter.access_reject] = updated
(1) [eap] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) } # Post-Auth-Type REJECT = updated
(1) Login incorrect (pap: Cleartext password does not match "known good"
password): [bob] (from client localhost port 0)
(1) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 104 from 127.0.0.1:1812 to 127.0.0.1:35842 length
32
(1) Reply-Message = "Hello, bob"
Waking up in 1.0 seconds.
(0) Cleaning up request packet ID 49 with timestamp +9
Waking up in 2.9 seconds.
(1) Cleaning up request packet ID 104 with timestamp +12
Ready to process requests
Corresponding detail-logs:
Fri Jan 11 11:09:09 2019
Packet-Type = Access-Accept
Reply-Message = "Hello, bob"
Timestamp = 1547201349
Fri Jan 11 11:09:11 2019
Packet-Type = Access-Reject
Reply-Message = "Hello, bob"
Timestamp = 1547201351
What could be the reason?
And another question: Is there any other attribute we can use for
debugging, available from 3.0.12 (debian maintenance version is 3.0.12 and
we plan to migrate) or radiusd -X is the only chance to get the module
messages if something goes wrong?
Alan DeKok <aland at deployingradius.com> ezt írta (időpont: 2019. jan. 9.,
Sze, 13:38):
> On Jan 9, 2019, at 7:13 AM, Fekete Tamás <fektom at gmail.com> wrote:
> >
> >> The attribute isn't created in 3.0.13. So either you can't use it in a
> > log message, or upgrade to 3.0.17, and it should exist there.
> >
> > As CentOS has only v3.0.13 freeradius package release currently, I have
> to
> > compile it by myself. However, there are a lot of dependencies not
> > installed and couldn't find the containing packages.
> >
> > After I have run ./configure I got the following warnings:
>
> Are you using those features? If not, they're just warnings. They can
> be ignored.
>
> > Do you have a list about necessary packages to solve dependencies
> mentioned
> > above?
>
> Are you using Redis? No? Then don't install any redis dependencies,
> and ignore any warnings about not finding Redis packages.
>
> The same goes for every other warning. If they were serious problems,
> they would have been errors, and not warnings.
>
> Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list