Troubleshooting "TLS failed during operation" with EAP-TLS

Michael Parks mparks at tkware.info
Fri Jun 5 05:17:11 CEST 2020


No change it seems.

3.0.21 debug log:

# freeradius -X
FreeRADIUS Version 3.0.21
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
  sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = 3306
        login = "radius"
        password = <<< secret >>>
        radius_db = "radius"
        read_groups = yes
        read_profiles = yes
        read_clients = yes
        delete_stale_sessions = yes
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
        group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
        auto_escape = no
   accounting {
        reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
    type {
     accounting-on {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime    = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
     }
     accounting-off {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime    = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
     }
     start {
        query = "INSERT INTO radacct (acctsessionid,            acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,          acctupdatetime, acctstoptime,         acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,        callingstationid, acctterminatecause,   servicetype,          framedprotocol, framedipaddress,        framedipv6address,      framedipv6prefix, framedinterfaceid,    delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')"
     }
     interim-update {
        query = "UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval    = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
     stop {
        query = "UPDATE radacct SET acctstoptime        = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime     = %{%{Acct-Session-Time}:-NULL}, acctinputoctets        = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
        reference = ".query"
        query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
        filename = "/etc/freeradius/3.0/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  instantiate {
  }
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
rlm_sql_mysql: libmysql version: 10.3.22
   mysql {
    tls {
        tls_required = no
        check_cert = no
        check_cert_cn = no
    }
        warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 192.168.88.1 (mikrotik) to global clients list
rlm_sql (192.168.88.1): Client "mikrotik" (sql) added
rlm_sql (sql): Adding client 127.0.0.1 (localhost) to global clients list
rlm_sql (127.0.0.1): Client "localhost" (sql) added
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/3.0/certs"
        pem_file_type = yes
        private_key_file = "/etc/ssl/private/radius.key"
        certificate_file = "/etc/ssl/certs/radius.pem"
        ca_file = "/etc/ssl/certs/vpnca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/etc/freeradius/3.0/certs/dh"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
        tls_max_version = ""
        tls_min_version = "1.0"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
The configuration allows TLS 1.0 and/or TLS 1.1.  We STRONGLY recommned using only TLS 1.2 for security
Please set: tls_min_version = "1.2"
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 1812
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on proxy address * port 42087
Ready to process requests
(0) Received Access-Request Id 153 from 192.168.88.1:52051 to 192.168.88.10:1812 length 130
(0)   User-Name = "ios"
(0)   Called-Station-Id = "184.167.60.170"
(0)   Calling-Station-Id = "174.209.8.201"
(0)   NAS-Port-Id = "\000\000\000\r"
(0)   NAS-Port-Type = Virtual
(0)   Service-Type = Framed-User
(0)   Event-Timestamp = "Jun  4 2020 19:32:18 BST"
(0)   Framed-MTU = 1400
(0)   EAP-Message = 0x0200000801696f73
(0)   Message-Authenticator = 0xe7cb31842ae403de62c2fa71b99e6bd8
(0)   NAS-Identifier = "MikroTik"
(0)   NAS-IP-Address = 192.168.88.1
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "ios", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 8
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 1 length 22
(0) eap: EAP session adding &reply:State = 0x51f4017451f5051f
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 153 from 192.168.88.10:1812 to 192.168.88.1:52051 length 0
(0)   EAP-Message = 0x010100160410d1d733243bbc8bc239df01da0c557ebe
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x51f4017451f5051f9a74b646ecb55fd8
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 154 from 192.168.88.1:36441 to 192.168.88.10:1812 length 148
(1)   User-Name = "ios"
(1)   Called-Station-Id = "184.167.60.170"
(1)   Calling-Station-Id = "174.209.8.201"
(1)   NAS-Port-Id = "\000\000\000\r"
(1)   NAS-Port-Type = Virtual
(1)   Service-Type = Framed-User
(1)   Event-Timestamp = "Jun  4 2020 19:32:18 BST"
(1)   Framed-MTU = 1400
(1)   State = 0x51f4017451f5051f9a74b646ecb55fd8
(1)   EAP-Message = 0x0201000803191a0d
(1)   Message-Authenticator = 0xda6261083b86f5401d332fd0c2846626
(1)   NAS-Identifier = "MikroTik"
(1)   NAS-IP-Address = 192.168.88.1
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "ios", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 8
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql:    --> ios
(1) sql: SQL-User-Name set to 'ios'
rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 163 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 163 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 163 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 163 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 163 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 163 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): 0 of 0 connections in use.  You  may need to increase "spare"
rlm_sql (sql): Opening additional connection (6), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
rlm_sql (sql): Reserved connection (6)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ios' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ios' ORDER BY id
(1) sql: User found in radcheck table
(1) sql: Conditional check items matched, merging assignment check items
(1) sql:   Cleartext-Password := "bzGCJedi"
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'ios' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'ios' ORDER BY id
rlm_sql (sql): 1 of 1 connections in use.  You  may need to increase "spare"
rlm_sql (sql): Opening additional connection (7), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
rlm_sql (sql): Reserved connection (7)
rlm_sql (sql): Released connection (7)
Need 1 more connections to reach min connections (3)
rlm_sql (sql): Opening additional connection (8), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(1) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'ios' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'ios' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (6)
(1)     [sql] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x51f4017451f5051f
(1) eap: Finished EAP session with state 0x51f4017451f5051f
(1) eap: Previous EAP request found for state 0x51f4017451f5051f, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 2 length 6
(1) eap: EAP session adding &reply:State = 0x51f4017450f6181f
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 154 from 192.168.88.10:1812 to 192.168.88.1:36441 length 0
(1)   EAP-Message = 0x010200061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x51f4017450f6181f9a74b646ecb55fd8
(1) Finished request
Waking up in 4.8 seconds.
(2) Received Access-Request Id 155 from 192.168.88.1:53917 to 192.168.88.10:1812 length 301
(2)   User-Name = "ios"
(2)   Called-Station-Id = "184.167.60.170"
(2)   Calling-Station-Id = "174.209.8.201"
(2)   NAS-Port-Id = "\000\000\000\r"
(2)   NAS-Port-Type = Virtual
(2)   Service-Type = Framed-User
(2)   Event-Timestamp = "Jun  4 2020 19:32:18 BST"
(2)   Framed-MTU = 1400
(2)   State = 0x51f4017450f6181f9a74b646ecb55fd8
(2)   EAP-Message = 0x020200a119800000009716030100920100008e03035ed9b8e1c31a0ef3c2918444ede2f6002bb442a605bcd8ed7bc14ffc04b3ba5700002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000
(2)   Message-Authenticator = 0x3fea641179846ecac63d31ec368ec77d
(2)   NAS-Identifier = "MikroTik"
(2)   NAS-IP-Address = 192.168.88.1
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "ios", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 161
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x51f4017450f6181f
(2) eap: Finished EAP session with state 0x51f4017450f6181f
(2) eap: Previous EAP request found for state 0x51f4017450f6181f, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 151 bytes
(2) eap_peap: Got complete TLS record (151 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv TLS 1.3  [length 0092] 
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2  [length 003d] 
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2  [length 089a] 
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2  [length 014d] 
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2  [length 0004] 
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(2) eap_peap: TLS - In Handshake Phase
(2) eap_peap: TLS - got 2620 bytes of data
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1004
(2) eap: EAP session adding &reply:State = 0x51f4017453f7181f
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 155 from 192.168.88.10:1812 to 192.168.88.1:53917 length 0
(2)   EAP-Message = 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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x51f4017453f7181f9a74b646ecb55fd8
(2) Finished request
Waking up in 4.6 seconds.
(3) Received Access-Request Id 156 from 192.168.88.1:40390 to 192.168.88.10:1812 length 146
(3)   User-Name = "ios"
(3)   Called-Station-Id = "184.167.60.170"
(3)   Calling-Station-Id = "174.209.8.201"
(3)   NAS-Port-Id = "\000\000\000\r"
(3)   NAS-Port-Type = Virtual
(3)   Service-Type = Framed-User
(3)   Event-Timestamp = "Jun  4 2020 19:32:18 BST"
(3)   Framed-MTU = 1400
(3)   State = 0x51f4017453f7181f9a74b646ecb55fd8
(3)   EAP-Message = 0x020300061900
(3)   Message-Authenticator = 0x8c845669a62fb27c61e9026baa17b166
(3)   NAS-Identifier = "MikroTik"
(3)   NAS-IP-Address = 192.168.88.1
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "ios", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x51f4017453f7181f
(3) eap: Finished EAP session with state 0x51f4017453f7181f
(3) eap: Previous EAP request found for state 0x51f4017453f7181f, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 1000
(3) eap: EAP session adding &reply:State = 0x51f4017452f0181f
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 156 from 192.168.88.10:1812 to 192.168.88.1:40390 length 0
(3)   EAP-Message = 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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x51f4017452f0181f9a74b646ecb55fd8
(3) Finished request
Waking up in 4.4 seconds.
(4) Received Access-Request Id 157 from 192.168.88.1:43517 to 192.168.88.10:1812 length 146
(4)   User-Name = "ios"
(4)   Called-Station-Id = "184.167.60.170"
(4)   Calling-Station-Id = "174.209.8.201"
(4)   NAS-Port-Id = "\000\000\000\r"
(4)   NAS-Port-Type = Virtual
(4)   Service-Type = Framed-User
(4)   Event-Timestamp = "Jun  4 2020 19:32:19 BST"
(4)   Framed-MTU = 1400
(4)   State = 0x51f4017452f0181f9a74b646ecb55fd8
(4)   EAP-Message = 0x020400061900
(4)   Message-Authenticator = 0x57de9d9d710e2fff1bc37411464d2b61
(4)   NAS-Identifier = "MikroTik"
(4)   NAS-IP-Address = 192.168.88.1
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "ios", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 4 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x51f4017452f0181f
(4) eap: Finished EAP session with state 0x51f4017452f0181f
(4) eap: Previous EAP request found for state 0x51f4017452f0181f, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 638
(4) eap: EAP session adding &reply:State = 0x51f4017455f1181f
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 157 from 192.168.88.10:1812 to 192.168.88.1:43517 length 0
(4)   EAP-Message = 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
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x51f4017455f1181f9a74b646ecb55fd8
(4) Finished request
Waking up in 4.3 seconds.
(5) Received Access-Request Id 158 from 192.168.88.1:44093 to 192.168.88.10:1812 length 157
(5)   User-Name = "ios"
(5)   Called-Station-Id = "184.167.60.170"
(5)   Calling-Station-Id = "174.209.8.201"
(5)   NAS-Port-Id = "\000\000\000\r"
(5)   NAS-Port-Type = Virtual
(5)   Service-Type = Framed-User
(5)   Event-Timestamp = "Jun  4 2020 19:32:19 BST"
(5)   Framed-MTU = 1400
(5)   State = 0x51f4017455f1181f9a74b646ecb55fd8
(5)   EAP-Message = 0x0205001119800000000715030300020100
(5)   Message-Authenticator = 0xc781820d3a81d7d88f38f663959561f3
(5)   NAS-Identifier = "MikroTik"
(5)   NAS-IP-Address = 192.168.88.1
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "ios", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 17
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x51f4017455f1181f
(5) eap: Finished EAP session with state 0x51f4017455f1181f
(5) eap: Previous EAP request found for state 0x51f4017455f1181f, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 7 bytes
(5) eap_peap: Got complete TLS record (7 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.2  [length 0002] 
(5) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(5) eap_peap: TLS - In Handshake Phase
(5) eap_peap: TLS - Application data.
(5) eap_peap: ERROR: TLS failed during operation
(5) eap_peap: ERROR: [eaptls process] = fail
(5) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module failed
(5) eap: Sending EAP Failure (code 4) ID 5 length 4
(5) eap: Failed in EAP select
(5)     [eap] = invalid
(5)   } # authenticate = invalid
(5) Failed to authenticate the user
(5) Using Post-Auth-Type Reject
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Post-Auth-Type REJECT {
(5) sql: EXPAND .query
(5) sql:    --> .query
(5) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (6)
(5) sql: EXPAND %{User-Name}
(5) sql:    --> ios
(5) sql: SQL-User-Name set to 'ios'
(5) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M')
(5) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ios', '', 'Access-Reject', '2020-06-05 04:15:31.505623')
(5) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ios', '', 'Access-Reject', '2020-06-05 04:15:31.505623')
(5) sql: SQL query returned: success
(5) sql: 1 record(s) updated
rlm_sql (sql): Released connection (6)
Need 7 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (9), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10
(5)     [sql] = ok
(5) attr_filter.access_reject: EXPAND %{User-Name}
(5) attr_filter.access_reject:    --> ios
(5) attr_filter.access_reject: Matched entry DEFAULT at line 11
(5)     [attr_filter.access_reject] = updated
(5)     [eap] = noop
(5)     policy remove_reply_message_if_eap {
(5)       if (&reply:EAP-Message && &reply:Reply-Message) {
(5)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(5)       else {
(5)         [noop] = noop
(5)       } # else = noop
(5)     } # policy remove_reply_message_if_eap = noop
(5)   } # Post-Auth-Type REJECT = updated
(5) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(5) (5) Discarding duplicate request from client mikrotik port 44093 - ID: 158 due to delayed response
(5) Sending delayed response
(5) Sent Access-Reject Id 158 from 192.168.88.10:1812 to 192.168.88.1:44093 length 44
(5)   EAP-Message = 0x04050004
(5)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.1 seconds.
(0) Cleaning up request packet ID 153 with timestamp +163
Waking up in 0.1 seconds.
(1) Cleaning up request packet ID 154 with timestamp +163
Waking up in 0.2 seconds.
(2) Cleaning up request packet ID 155 with timestamp +163
Waking up in 0.1 seconds.
(3) Cleaning up request packet ID 156 with timestamp +164
Waking up in 0.1 seconds.
(4) Cleaning up request packet ID 157 with timestamp +164
Waking up in 0.2 seconds.
(5) Cleaning up request packet ID 158 with timestamp +164
Ready to process requests

On Thu, Jun 4, 2020, at 2:47 PM, Alan DeKok wrote:
> On Jun 4, 2020, at 2:14 PM, Michael Parks <mparks at tkware.info> wrote:
> > I am attempting to authenticate iPhone clients using the built in IPSEC client with a username/password. Configuration is a MikroTik router hosting the VPN, using a separate FreeRADIUS server on Ubuntu 18.04 for AAA.
> > 
> > The iPhone seems to require EAP-TLS for this configuration. I've set up the appropriate CA, certificate, and private key, and verified that these all match up using OpenSSL (same modulus on the cert and key, -verify shows that the cert can be verified up to the installed CA cert)
> > 
> > My current configuration results in a "ERROR: TLS failed during operation" message, and an authentication failure, whenever iPhone clients try to log in. No further information as to the precise nature of the TLS failure appears to be visible in the debug output.
> > 
> > Speaking of which, here it is. The only actions taken were starting freeradius and attempting to log in with the iPhone:
> > 
> > ---
> > FreeRADIUS Version 3.0.17
> 
>   The short summary is upgrade to 3.0.21.  See 
> http://packages.networkradius.com for instructions.
> 
>   We've put minor tweaks in over the years to fix corner cases.  I 
> suspect this is what you're running into here.
> 
>   Alan DeKok.
> 
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html



More information about the Freeradius-Users mailing list