Testing mschapv2 with custom radius attributes

[Munroe Sollog]

I'm trying to set Aruba-Essid-Name using the -N option in the eapol_test
command.  It says I need to use the numeric ID of the attribute.  When I
look at the dictionary.aruba file the VENDOR is "14823" and the
Aruba-Essid-Name is "5".  If I am interpreting this correctly I would do
something like:

eapol_test -c /etc/eapol_test.conf -a 192.168.10.10 -ss3cr3t
-N148235:s:myessid


When I run that command I get:


0) Received Access-Request Id 0 from 192.168.0.244:48088 to
192.168.10.10:1812 length 134

(0)   User-Name = "testuser"

(0)   NAS-IP-Address = 127.0.0.1

(0)   Calling-Station-Id = "02-00-00-00-00-01"

(0)   Framed-MTU = 1400

(0)   NAS-Port-Type = Wireless-802.11

(0)   Service-Type = Framed-User

(0)   Connect-Info = "CONNECT 11Mbps 802.11b"

(0)   Filter-Id = "myessid"

"Filter-Id" is showing up rather than "Aruba-Essid-Name" so obviously I am
interpreting what I need to do incorrectly.  Any help would be appreciated.
-- 
Munroe Sollog (He/Him/His)
Senior Network Engineer
munroe at lehigh.edu