rlm_python3 getting secret

[Dave Macias]

oh my....

Just realized something.
I missed setting the dynamic clients for this client....
Ok, let me do that.
I'll report back.

Apologies ahead of time if making unnecessary noise.

On Wed, Jan 26, 2022 at 5:13 PM Dave Macias <davama at gmail.com> wrote:

> Hello,
>
> First of all, thank you for this post:
> https://blog.sys4.de/freeradius-clients-netbox-en.html
> We are in the process of integrating netbox into our infra and this post
> got me pretty excited.
>
> Followed this guide and i was able to see the request as expected
> https://wiki.freeradius.org/modules/Rlm_python
>
> (0)     [preprocess] = ok
> *** authorize ***
> *** radlog call in authorize ***
>
> (('User-Name', 'myusername'), ('User-Password', 'mysecretpassword'),
> ('NAS-IPv6-Address', 'xxx:xxx:xx:xxx:21c:2eff:fe57:cd00'),
> ('NAS-Identifier', 'myswitchname'), ('NAS-Port-Type', 'Virtual'),
> ('Service-Type', 'NAS-Prompt-User'), ('Message-Authenticator',
> '0xasdfasdfasdf231234512asdfasd'), ('MS-RAS-Vendor', '11'),
> ('Calling-Station-Id', 'xx:xxx:xxx:12'), ('Event-Timestamp', 'Jan 26 2022
> 13:34:21 EST'), ('Huntgroup-Name', 'switch'))
>
> {}
> (0)     [python3] = ok
>
>
> According to the python code on the netbox post, i should be able to store
> the secret into netbox. Since im still in my testing phase, I wanted to see
> the secret. I thought it would show by print(p) but it does not.
>
> So my question, where is the secret ? How can i see it if possible?
>
> Thank you again for the very interesting posts!
>
> Best,
> Dave
>
>