rlm_python3 getting secret

[Dave Macias]

Had some good progress here.
Main issue here was that my virtual server in default was receiving the Access-Request packets and i also did not have a listen section in my dynamic_clients file.

Now i can see all the packet info which i can do whatever I want with python.

Thanks,
Dave

On Jan 26, 2022, 5:16 PM -0500, Dave Macias <davama at gmail.com>, wrote:
> oh my....
>
> Just realized something.
> I missed setting the dynamic clients for this client....
> Ok, let me do that.
> I'll report back.
>
> Apologies ahead of time if making unnecessary noise.
>
> > On Wed, Jan 26, 2022 at 5:13 PM Dave Macias <davama at gmail.com> wrote:
> > > Hello,
> > >
> > > First of all, thank you for this post: https://blog.sys4.de/freeradius-clients-netbox-en.html
> > > We are in the process of integrating netbox into our infra and this post got me pretty excited.
> > >
> > > Followed this guide and i was able to see the request as expected
> > > https://wiki.freeradius.org/modules/Rlm_python
> > >
> > > (0)     [preprocess] = ok
> > > *** authorize ***
> > > *** radlog call in authorize ***
> > >
> > > (('User-Name', 'myusername'), ('User-Password', 'mysecretpassword'), ('NAS-IPv6-Address', 'xxx:xxx:xx:xxx:21c:2eff:fe57:cd00'), ('NAS-Identifier', 'myswitchname'), ('NAS-Port-Type', 'Virtual'), ('Service-Type', 'NAS-Prompt-User'), ('Message-Authenticator', '0xasdfasdfasdf231234512asdfasd'), ('MS-RAS-Vendor', '11'), ('Calling-Station-Id', 'xx:xxx:xxx:12'), ('Event-Timestamp', 'Jan 26 2022 13:34:21 EST'), ('Huntgroup-Name', 'switch'))
> > >
> > > {}
> > > (0)     [python3] = ok
> > >
> > >
> > > According to the python code on the netbox post, i should be able to store the secret into netbox. Since im still in my testing phase, I wanted to see the secret. I thought it would show by print(p) but it does not.
> > >
> > > So my question, where is the secret ? How can i see it if possible?
> > >
> > > Thank you again for the very interesting posts!
> > >
> > > Best,
> > > Dave
> > >