Freeradius service does not start

Dumitru ghid777 at yahoo.com
Tue Jan 23 09:03:17 UTC 2024


Below I place the debug output :
radiusd -X 2>&1 | tee debugfileFreeRADIUS Version 3.0.21Copyright (C) 1999-2019 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/3.0/dictionaryincluding configuration file /etc/freeradius/3.0/radiusd.confincluding configuration file /etc/freeradius/3.0/proxy.confincluding configuration file /etc/freeradius/3.0/clients.confincluding files in directory /etc/freeradius/3.0/mods-enabled/including configuration file /etc/freeradius/3.0/mods-enabled/expirationincluding configuration file /etc/freeradius/3.0/mods-enabled/alwaysincluding configuration file /etc/freeradius/3.0/mods-enabled/detail.logincluding configuration file /etc/freeradius/3.0/mods-enabled/passwdincluding configuration file /etc/freeradius/3.0/mods-enabled/papincluding configuration file /etc/freeradius/3.0/mods-enabled/ntlm_authincluding configuration file /etc/freeradius/3.0/mods-enabled/echoincluding configuration file /etc/freeradius/3.0/mods-enabled/radutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/digestincluding configuration file /etc/freeradius/3.0/mods-enabled/utf8including configuration file /etc/freeradius/3.0/mods-enabled/sradutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/sohincluding configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clientsincluding configuration file /etc/freeradius/3.0/mods-enabled/cache_eapincluding configuration file /etc/freeradius/3.0/mods-enabled/attr_filterincluding configuration file /etc/freeradius/3.0/mods-enabled/eapincluding configuration file /etc/freeradius/3.0/mods-enabled/mschapincluding configuration file /etc/freeradius/3.0/mods-enabled/replicateincluding configuration file /etc/freeradius/3.0/mods-enabled/logintimeincluding configuration file /etc/freeradius/3.0/mods-enabled/realmincluding configuration file /etc/freeradius/3.0/mods-enabled/execincluding configuration file /etc/freeradius/3.0/mods-enabled/filesincluding configuration file /etc/freeradius/3.0/mods-enabled/unpackincluding configuration file /etc/freeradius/3.0/mods-enabled/linelogincluding configuration file /etc/freeradius/3.0/mods-enabled/unixincluding configuration file /etc/freeradius/3.0/mods-enabled/detailincluding configuration file /etc/freeradius/3.0/mods-enabled/chapincluding configuration file /etc/freeradius/3.0/mods-enabled/exprincluding configuration file /etc/freeradius/3.0/mods-enabled/preprocessincluding files in directory /etc/freeradius/3.0/policy.d/including configuration file /etc/freeradius/3.0/policy.d/abfab-trincluding configuration file /etc/freeradius/3.0/policy.d/cuiincluding configuration file /etc/freeradius/3.0/policy.d/operator-nameincluding configuration file /etc/freeradius/3.0/policy.d/filterincluding configuration file /etc/freeradius/3.0/policy.d/dhcpincluding configuration file /etc/freeradius/3.0/policy.d/accountingincluding configuration file /etc/freeradius/3.0/policy.d/debugincluding configuration file /etc/freeradius/3.0/policy.d/eapincluding configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-idsincluding configuration file /etc/freeradius/3.0/policy.d/controlincluding configuration file /etc/freeradius/3.0/policy.d/canonicalizationincluding configuration file /etc/freeradius/3.0/policy.d/rfc7542including files in directory /etc/freeradius/3.0/sites-enabled/including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnelincluding configuration file /etc/freeradius/3.0/sites-enabled/defaultmain { security {        user = "freerad"        group = "freerad"        allow_core_dumps = no }        name = "freeradius"        prefix = "/usr"        localstatedir = "/var"        logdir = "/var/log/freeradius"        run_dir = "/var/run/freeradius"}main {        name = "freeradius"        prefix = "/usr"        localstatedir = "/var"        sbindir = "/usr/sbin"        logdir = "/var/log/freeradius"        run_dir = "/var/run/freeradius"        libdir = "/usr/lib/freeradius"        radacctdir = "/var/log/freeradius/radacct"        hostname_lookups = no        max_request_time = 30        cleanup_delay = 5        max_requests = 16384        pidfile = "/var/run/freeradius/freeradius.pid"        checkrad = "/usr/sbin/checkrad"        debug_level = 0        proxy_requests = yes log {        stripped_names = no        auth = no        auth_badpass = no        auth_goodpass = no        colourise = yes        msg_denied = "You are already logged in - access denied" } resources { } security {        max_attributes = 200        reject_delay = 1.000000        status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server {        retry_delay = 5        retry_count = 3        default_fallback = no        dead_time = 120        wake_all_if_all_dead = no } home_server localhost {        ipaddr = 127.0.0.1        port = 1812        type = "auth"        secret = <<< secret >>>        response_window = 20.000000        response_timeouts = 1        max_outstanding = 65536        zombie_period = 40        status_check = "status-server"        ping_interval = 30        check_interval = 30        check_timeout = 4        num_answers_to_alive = 3        revive_interval = 120  limit {        max_connections = 16        max_requests = 0        lifetime = 0        idle_timeout = 0  }  coa {        irt = 2        mrt = 16        mrc = 5        mrd = 30  } } home_server_pool my_auth_failover {        type = fail-over        home_server = localhost } realm example.com {        auth_pool = my_auth_failover } realm LOCAL { }radiusd: #### Loading Clients #### client localhost {        ipaddr = 127.0.0.1        require_message_authenticator = no        secret = <<< secret >>>        nas_type = "other"        proto = "*"  limit {        max_connections = 16        lifetime = 0        idle_timeout = 30  } } client localhost_ipv6 {        ipv6addr = ::1        require_message_authenticator = no        secret = <<< secret >>>  limit {        max_connections = 16        lifetime = 0        idle_timeout = 30  } }Debugger not attachedsystemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digestradiusd: #### Instantiating modules #### modules {  # Loaded module rlm_expiration  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration  # Loaded module rlm_always  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always  always reject {        rcode = "reject"        simulcount = 0        mpp = no  }  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always  always fail {        rcode = "fail"        simulcount = 0        mpp = no  }  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always  always ok {        rcode = "ok"        simulcount = 0        mpp = no  }  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always  always handled {        rcode = "handled"        simulcount = 0        mpp = no  }  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always  always invalid {        rcode = "invalid"        simulcount = 0        mpp = no  }  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always  always userlock {        rcode = "userlock"        simulcount = 0        mpp = no  }  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always  always notfound {        rcode = "notfound"        simulcount = 0        mpp = no  }  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always  always noop {        rcode = "noop"        simulcount = 0        mpp = no  }  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always  always updated {        rcode = "updated"        simulcount = 0        mpp = no  }  # Loaded module rlm_detail  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail auth_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail reply_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail pre_proxy_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail post_proxy_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loaded module rlm_passwd  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd  passwd etc_passwd {        filename = "/etc/passwd"        format = "*User-Name:Crypt-Password:"        delimiter = ":"        ignore_nislike = no        ignore_empty = yes        allow_multiple_keys = no        hash_size = 100  }  # Loaded module rlm_pap  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap  pap {        normalise = yes  }  # Loaded module rlm_exec  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth  exec ntlm_auth {        wait = yes        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"        shell_escape = yes  }  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo  exec echo {        wait = yes        program = "/bin/echo %{User-Name}"        input_pairs = "request"        output_pairs = "reply"        shell_escape = yes  }  # Loaded module rlm_radutmp  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp  radutmp {        filename = "/var/log/freeradius/radutmp"        username = "%{User-Name}"        case_sensitive = yes        check_with_nas = yes        permissions = 384        caller_id = yes  }  # Loaded module rlm_digest  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest  # Loaded module rlm_utf8  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp  radutmp sradutmp {        filename = "/var/log/freeradius/sradutmp"        username = "%{User-Name}"        case_sensitive = yes        check_with_nas = yes        permissions = 420        caller_id = no  }  # Loaded module rlm_soh  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh  soh {        dhcp = yes  }  # Loaded module rlm_dynamic_clients  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients  # Loaded module rlm_cache  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap  cache cache_eap {        driver = "rlm_cache_rbtree"        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"        ttl = 15        max_entries = 0        epoch = 0        add_stats = no  }  # Loaded module rlm_attr_filter  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.post-proxy {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"        key = "%{Realm}"        relaxed = no  }  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.pre-proxy {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"        key = "%{Realm}"        relaxed = no  }  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.access_reject {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"        key = "%{User-Name}"        relaxed = no  }  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.access_challenge {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"        key = "%{User-Name}"        relaxed = no  }  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.accounting_response {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"        key = "%{User-Name}"        relaxed = no  }  # Loaded module rlm_eap  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap  eap {        default_eap_type = "md5"        timer_expire = 60        ignore_unknown_eap_types = no        cisco_accounting_username_bug = no        max_sessions = 16384  }  # Loaded module rlm_mschap  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap  mschap {        use_mppe = yes        require_encryption = no        require_strong = no        with_ntdomain_hack = yes   passchange {   }        allow_retry = yes        winbind_retry_with_normalised_username = no  }  # Loaded module rlm_replicate  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate  # Loaded module rlm_logintime  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime  logintime {        minimum_timeout = 60  }  # Loaded module rlm_realm  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm  realm IPASS {        format = "prefix"        delimiter = "/"        ignore_default = no        ignore_null = no  }  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm  realm suffix {        format = "suffix"        delimiter = "@"        ignore_default = no        ignore_null = no  }  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm  realm bangpath {        format = "prefix"        delimiter = "!"        ignore_default = no        ignore_null = no  }  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm  realm realmpercent {        format = "suffix"        delimiter = "%"        ignore_default = no        ignore_null = no  }  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm  realm ntdomain {        format = "prefix"        delimiter = "\\"        ignore_default = no        ignore_null = no  }  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec  exec {        wait = no        input_pairs = "request"        shell_escape = yes        timeout = 10  }  # Loaded module rlm_files  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files  files {        filename = "/etc/freeradius/3.0/mods-config/files/authorize"        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"  }  # Loaded module rlm_unpack  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack  # Loaded module rlm_linelog  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog  linelog {        filename = "/var/log/freeradius/linelog"        escape_filenames = no        syslog_severity = "info"        permissions = 384        format = "This is a log message for %{User-Name}"        reference = "messages.%{%{reply:Packet-Type}:-default}"  }  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog  linelog log_accounting {        filename = "/var/log/freeradius/linelog-accounting"        escape_filenames = no        syslog_severity = "info"        permissions = 384        format = ""        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"  }  # Loaded module rlm_unix  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix  unix {        radwtmp = "/var/log/freeradius/radwtmp"  }Creating attribute Unix-Group  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail  detail {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loaded module rlm_chap  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap  # Loaded module rlm_expr  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr  expr {        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"  }  # Loaded module rlm_preprocess  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess  preprocess {        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"        with_ascend_hack = no        ascend_channels_per_line = 23        with_ntdomain_hack = no        with_specialix_jetstream_hack = no        with_cisco_vsa_hack = no        with_alvarion_vsa_hack = no  }  instantiate {  }  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap   # Linked to sub-module rlm_eap_md5   # Linked to sub-module rlm_eap_leap   # Linked to sub-module rlm_eap_gtc   gtc {        challenge = "Password: "        auth_type = "PAP"   }   # Linked to sub-module rlm_eap_tls   tls {        tls = "tls-common"   }   tls-config tls-common {        verify_depth = 0        ca_path = "/etc/freeradius/3.0/certs"        pem_file_type = yes        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"        ca_file = "/etc/ssl/certs/ca-certificates.crt"        private_key_password = <<< secret >>>        dh_file = "/etc/freeradius/3.0/certs/dh"        fragment_size = 1024        include_length = yes        auto_chain = yes        check_crl = no        check_all_crl = no        cipher_list = "DEFAULT"        cipher_server_preference = no        ecdh_curve = "prime256v1"        disable_tlsv1 = yes        disable_tlsv1_1 = yes        tls_max_version = "1.2"        tls_min_version = "1.2"    cache {        enable = no        lifetime = 24        max_entries = 255    }    verify {        skip_if_ocsp_ok = no    }    ocsp {        enable = no        override_cert_url = yes        url = "http://127.0.0.1/ocsp/"        use_nonce = yes        timeout = 0        softfail = no    }   }Please use tls_min_version and tls_max_version instead of disable_tlsv1Please use tls_min_version and tls_max_version instead of disable_tlsv1_2   # Linked to sub-module rlm_eap_ttls   ttls {        tls = "tls-common"        default_eap_type = "md5"        copy_request_to_tunnel = no        use_tunneled_reply = no        virtual_server = "inner-tunnel"        include_length = yes        require_client_cert = no   }tls: Using cached TLS configuration from previous invocation   # Linked to sub-module rlm_eap_peap   peap {        tls = "tls-common"        default_eap_type = "mschapv2"        copy_request_to_tunnel = no        use_tunneled_reply = no        proxy_tunneled_request_as_eap = yes        virtual_server = "inner-tunnel"        soh = no        require_client_cert = no   }tls: Using cached TLS configuration from previous invocation   # Linked to sub-module rlm_eap_mschapv2   mschapv2 {        with_ntdomain_hack = no        send_error = no   }  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschaprlm_mschap (mschap): using internal authentication  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/filesreading pairlist file /etc/freeradius/3.0/mods-config/files/authorizereading pairlist file /etc/freeradius/3.0/mods-config/files/accountingreading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocessreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroupsreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /etc/freeradius/3.0/radiusd.conf} # serverserver inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst)Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336} # server inner-tunnelserver default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...}} # server defaultradiusd: #### Opening IP addresses and Ports ####listen {        type = "auth"        ipaddr = 127.0.0.1        port = 18120}listen {        type = "auth"        ipaddr = *        port = 0   limit {        max_connections = 16        lifetime = 0        idle_timeout = 30   }}listen {        type = "acct"        ipaddr = *        port = 0   limit {        max_connections = 16        lifetime = 0        idle_timeout = 30   }}Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnelListening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on proxy address * port 40894Ready to process requests

    On Tuesday, January 23, 2024 at 09:20:13 AM GMT+1, Dumitru via Freeradius-Users <freeradius-users at lists.freeradius.org> wrote:  
 
 Hello,
I wanted to start Freeradius server for configuring access with client devices. After installing the Freeradius server the Freeradius service is active but sometimes after the new installation or after executing the systemctl status freeradius command the service is not active. The current output is: 

● freeradius.service - FreeRADIUS multi-protocol policy server     Loaded: loaded (/lib/systemd/system/freeradius.service; enabled; vendor preset: enabled)     Active: activating (auto-restart) (Result: exit-code) since Tue 2024-01-23 07:54:55 CET; 2s ago       Docs: man:radiusd(8)             man:radiusd.conf(5)             http://wiki.freeradius.org/             http://networkradius.com/doc/    Process: 24003 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cx -lstdout (code=exited, status=226/NAMESPACE)        CPU: 15ms



Before the new installation I uninstalled Freeradius with apt purge freeradius and apt autoremove. 
status=226/NAMESPACE - usually appears sometimes after new Freeradius server installation.
Freeradius server sometimes starts after new installation, sometimes not.
If the Freeradius service starts, after a while it stops and after running systemctl status freeradius on exit, the message :
status=1/FAILURE instead of status=226/NAMESPACE
compared to the output above.


OS: "Raspbian GNU/Linux 11 (bullseye)

Below I place the debug output : 


radiusd -X 2>&1 | tee debugfileFreeRADIUS Version 3.0.21Copyright (C) 1999-2019 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/3.0/dictionaryincluding configuration file /etc/freeradius/3.0/radiusd.confincluding configuration file /etc/freeradius/3.0/proxy.confincluding configuration file /etc/freeradius/3.0/clients.confincluding files in directory /etc/freeradius/3.0/mods-enabled/including configuration file /etc/freeradius/3.0/mods-enabled/expirationincluding configuration file /etc/freeradius/3.0/mods-enabled/alwaysincluding configuration file /etc/freeradius/3.0/mods-enabled/detail.logincluding configuration file /etc/freeradius/3.0/mods-enabled/passwdincluding configuration file /etc/freeradius/3.0/mods-enabled/papincluding configuration file /etc/freeradius/3.0/mods-enabled/ntlm_authincluding configuration file /etc/freeradius/3.0/mods-enabled/echoincluding configuration file /etc/freeradius/3.0/mods-enabled/radutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/digestincluding configuration file /etc/freeradius/3.0/mods-enabled/utf8including configuration file /etc/freeradius/3.0/mods-enabled/sradutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/sohincluding configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clientsincluding configuration file /etc/freeradius/3.0/mods-enabled/cache_eapincluding configuration file /etc/freeradius/3.0/mods-enabled/attr_filterincluding configuration file /etc/freeradius/3.0/mods-enabled/eapincluding configuration file /etc/freeradius/3.0/mods-enabled/mschapincluding configuration file /etc/freeradius/3.0/mods-enabled/replicateincluding configuration file /etc/freeradius/3.0/mods-enabled/logintimeincluding configuration file /etc/freeradius/3.0/mods-enabled/realmincluding configuration file /etc/freeradius/3.0/mods-enabled/execincluding configuration file /etc/freeradius/3.0/mods-enabled/filesincluding configuration file /etc/freeradius/3.0/mods-enabled/unpackincluding configuration file /etc/freeradius/3.0/mods-enabled/linelogincluding configuration file /etc/freeradius/3.0/mods-enabled/unixincluding configuration file /etc/freeradius/3.0/mods-enabled/detailincluding configuration file /etc/freeradius/3.0/mods-enabled/chapincluding configuration file /etc/freeradius/3.0/mods-enabled/exprincluding configuration file /etc/freeradius/3.0/mods-enabled/preprocessincluding files in directory /etc/freeradius/3.0/policy.d/including configuration file /etc/freeradius/3.0/policy.d/abfab-trincluding configuration file /etc/freeradius/3.0/policy.d/cuiincluding configuration file /etc/freeradius/3.0/policy.d/operator-nameincluding configuration file /etc/freeradius/3.0/policy.d/filterincluding configuration file /etc/freeradius/3.0/policy.d/dhcpincluding configuration file /etc/freeradius/3.0/policy.d/accountingincluding configuration file /etc/freeradius/3.0/policy.d/debugincluding configuration file /etc/freeradius/3.0/policy.d/eapincluding configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-idsincluding configuration file /etc/freeradius/3.0/policy.d/controlincluding configuration file /etc/freeradius/3.0/policy.d/canonicalizationincluding configuration file /etc/freeradius/3.0/policy.d/rfc7542including files in directory /etc/freeradius/3.0/sites-enabled/including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnelincluding configuration file /etc/freeradius/3.0/sites-enabled/defaultmain { security {        user = "freerad"        group = "freerad"        allow_core_dumps = no }        name = "freeradius"        prefix = "/usr"        localstatedir = "/var"        logdir = "/var/log/freeradius"        run_dir = "/var/run/freeradius"}main {        name = "freeradius"        prefix = "/usr"        localstatedir = "/var"        sbindir = "/usr/sbin"        logdir = "/var/log/freeradius"        run_dir = "/var/run/freeradius"        libdir = "/usr/lib/freeradius"        radacctdir = "/var/log/freeradius/radacct"        hostname_lookups = no        max_request_time = 30        cleanup_delay = 5        max_requests = 16384        pidfile = "/var/run/freeradius/freeradius.pid"        checkrad = "/usr/sbin/checkrad"        debug_level = 0        proxy_requests = yes log {        stripped_names = no        auth = no        auth_badpass = no        auth_goodpass = no        colourise = yes        msg_denied = "You are already logged in - access denied" } resources { } security {        max_attributes = 200        reject_delay = 1.000000        status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server {        retry_delay = 5        retry_count = 3        default_fallback = no        dead_time = 120        wake_all_if_all_dead = no } home_server localhost {        ipaddr = 127.0.0.1        port = 1812        type = "auth"        secret = <<< secret >>>        response_window = 20.000000        response_timeouts = 1        max_outstanding = 65536        zombie_period = 40        status_check = "status-server"        ping_interval = 30        check_interval = 30        check_timeout = 4        num_answers_to_alive = 3        revive_interval = 120  limit {        max_connections = 16        max_requests = 0        lifetime = 0        idle_timeout = 0  }  coa {        irt = 2        mrt = 16        mrc = 5        mrd = 30  } } home_server_pool my_auth_failover {        type = fail-over        home_server = localhost } realm example.com {        auth_pool = my_auth_failover } realm LOCAL { }radiusd: #### Loading Clients #### client localhost {        ipaddr = 127.0.0.1        require_message_authenticator = no        secret = <<< secret >>>        nas_type = "other"        proto = "*"  limit {        max_connections = 16        lifetime = 0        idle_timeout = 30  } } client localhost_ipv6 {        ipv6addr = ::1        require_message_authenticator = no        secret = <<< secret >>>  limit {        max_connections = 16        lifetime = 0        idle_timeout = 30  } } client 10.17.30.250 {        ipv4addr = 10.17.30.250        require_message_authenticator = no        secret = <<< secret >>>        shortname = "rdses1013-2"  limit {        max_connections = 16        lifetime = 0        idle_timeout = 30  } }Debugger not attachedsystemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digestradiusd: #### Instantiating modules #### modules {  # Loaded module rlm_expiration  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration  # Loaded module rlm_always  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always  always reject {        rcode = "reject"        simulcount = 0        mpp = no  }  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always  always fail {        rcode = "fail"        simulcount = 0        mpp = no  }  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always  always ok {        rcode = "ok"        simulcount = 0        mpp = no  }  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always  always handled {        rcode = "handled"        simulcount = 0        mpp = no  }  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always  always invalid {        rcode = "invalid"        simulcount = 0        mpp = no  }  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always  always userlock {        rcode = "userlock"        simulcount = 0        mpp = no  }  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always  always notfound {        rcode = "notfound"        simulcount = 0        mpp = no  }  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always  always noop {        rcode = "noop"        simulcount = 0        mpp = no  }  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always  always updated {        rcode = "updated"        simulcount = 0        mpp = no  }  # Loaded module rlm_detail  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail auth_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail reply_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail pre_proxy_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  detail post_proxy_log {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loaded module rlm_passwd  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd  passwd etc_passwd {        filename = "/etc/passwd"        format = "*User-Name:Crypt-Password:"        delimiter = ":"        ignore_nislike = no        ignore_empty = yes        allow_multiple_keys = no        hash_size = 100  }  # Loaded module rlm_pap  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap  pap {        normalise = yes  }  # Loaded module rlm_exec  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth  exec ntlm_auth {        wait = yes        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"        shell_escape = yes  }  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo  exec echo {        wait = yes        program = "/bin/echo %{User-Name}"        input_pairs = "request"        output_pairs = "reply"        shell_escape = yes  }  # Loaded module rlm_radutmp  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp  radutmp {        filename = "/var/log/freeradius/radutmp"        username = "%{User-Name}"        case_sensitive = yes        check_with_nas = yes        permissions = 384        caller_id = yes  }  # Loaded module rlm_digest  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest  # Loaded module rlm_utf8  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp  radutmp sradutmp {        filename = "/var/log/freeradius/sradutmp"        username = "%{User-Name}"        case_sensitive = yes        check_with_nas = yes        permissions = 420        caller_id = no  }  # Loaded module rlm_soh  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh  soh {        dhcp = yes  }  # Loaded module rlm_dynamic_clients  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients  # Loaded module rlm_cache  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap  cache cache_eap {        driver = "rlm_cache_rbtree"        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"        ttl = 15        max_entries = 0        epoch = 0        add_stats = no  }  # Loaded module rlm_attr_filter  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.post-proxy {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"        key = "%{Realm}"        relaxed = no  }  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.pre-proxy {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"        key = "%{Realm}"        relaxed = no  }  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.access_reject {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"        key = "%{User-Name}"        relaxed = no  }  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.access_challenge {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"        key = "%{User-Name}"        relaxed = no  }  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter  attr_filter attr_filter.accounting_response {        filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"        key = "%{User-Name}"        relaxed = no  }  # Loaded module rlm_eap  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap  eap {        default_eap_type = "md5"        timer_expire = 60        ignore_unknown_eap_types = no        cisco_accounting_username_bug = no        max_sessions = 16384  }  # Loaded module rlm_mschap  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap  mschap {        use_mppe = yes        require_encryption = no        require_strong = no        with_ntdomain_hack = yes   passchange {   }        allow_retry = yes        winbind_retry_with_normalised_username = no  }  # Loaded module rlm_replicate  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate  # Loaded module rlm_logintime  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime  logintime {        minimum_timeout = 60  }  # Loaded module rlm_realm  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm  realm IPASS {        format = "prefix"        delimiter = "/"        ignore_default = no        ignore_null = no  }  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm  realm suffix {        format = "suffix"        delimiter = "@"        ignore_default = no        ignore_null = no  }  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm  realm bangpath {        format = "prefix"        delimiter = "!"        ignore_default = no        ignore_null = no  }  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm  realm realmpercent {        format = "suffix"        delimiter = "%"        ignore_default = no        ignore_null = no  }  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm  realm ntdomain {        format = "prefix"        delimiter = "\\"        ignore_default = no        ignore_null = no  }  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec  exec {        wait = no        input_pairs = "request"        shell_escape = yes        timeout = 10  }  # Loaded module rlm_files  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files  files {        filename = "/etc/freeradius/3.0/mods-config/files/authorize"        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"  }  # Loaded module rlm_unpack  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack  # Loaded module rlm_linelog  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog  linelog {        filename = "/var/log/freeradius/linelog"        escape_filenames = no        syslog_severity = "info"        permissions = 384        format = "This is a log message for %{User-Name}"        reference = "messages.%{%{reply:Packet-Type}:-default}"  }  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog  linelog log_accounting {        filename = "/var/log/freeradius/linelog-accounting"        escape_filenames = no        syslog_severity = "info"        permissions = 384        format = ""        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"  }  # Loaded module rlm_unix  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix  unix {        radwtmp = "/var/log/freeradius/radwtmp"  }Creating attribute Unix-Group  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail  detail {        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"        header = "%t"        permissions = 384        locking = no        escape_filenames = no        log_packet_header = no  }  # Loaded module rlm_chap  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap  # Loaded module rlm_expr  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr  expr {        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"  }  # Loaded module rlm_preprocess  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess  preprocess {        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"        with_ascend_hack = no        ascend_channels_per_line = 23        with_ntdomain_hack = no        with_specialix_jetstream_hack = no        with_cisco_vsa_hack = no        with_alvarion_vsa_hack = no  }  instantiate {  }  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap   # Linked to sub-module rlm_eap_md5   # Linked to sub-module rlm_eap_leap   # Linked to sub-module rlm_eap_gtc   gtc {        challenge = "Password: "        auth_type = "PAP"   }   # Linked to sub-module rlm_eap_tls   tls {        tls = "tls-common"   }   tls-config tls-common {        verify_depth = 0        ca_path = "/etc/freeradius/3.0/certs"        pem_file_type = yes        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"        ca_file = "/etc/ssl/certs/ca-certificates.crt"        private_key_password = <<< secret >>>        dh_file = "/etc/freeradius/3.0/certs/dh"        fragment_size = 1024        include_length = yes        auto_chain = yes        check_crl = no        check_all_crl = no        cipher_list = "DEFAULT"        cipher_server_preference = no        ecdh_curve = "prime256v1"        disable_tlsv1 = yes        disable_tlsv1_1 = yes        tls_max_version = "1.2"        tls_min_version = "1.2"    cache {        enable = no        lifetime = 24        max_entries = 255    }    verify {        skip_if_ocsp_ok = no    }    ocsp {        enable = no        override_cert_url = yes        url = "http://127.0.0.1/ocsp/"        use_nonce = yes        timeout = 0        softfail = no    }   }Please use tls_min_version and tls_max_version instead of disable_tlsv1Please use tls_min_version and tls_max_version instead of disable_tlsv1_2   # Linked to sub-module rlm_eap_ttls   ttls {        tls = "tls-common"        default_eap_type = "md5"        copy_request_to_tunnel = no        use_tunneled_reply = no        virtual_server = "inner-tunnel"        include_length = yes        require_client_cert = no   }tls: Using cached TLS configuration from previous invocation   # Linked to sub-module rlm_eap_peap   peap {        tls = "tls-common"        default_eap_type = "mschapv2"        copy_request_to_tunnel = no        use_tunneled_reply = no        proxy_tunneled_request_as_eap = yes        virtual_server = "inner-tunnel"        soh = no        require_client_cert = no   }tls: Using cached TLS configuration from previous invocation   # Linked to sub-module rlm_eap_mschapv2   mschapv2 {        with_ntdomain_hack = no        send_error = no   }  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschaprlm_mschap (mschap): using internal authentication  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/filesreading pairlist file /etc/freeradius/3.0/mods-config/files/authorizereading pairlist file /etc/freeradius/3.0/mods-config/files/accountingreading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocessreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroupsreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /etc/freeradius/3.0/radiusd.conf} # serverserver inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst)Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336} # server inner-tunnelserver default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...}} # server defaultradiusd: #### Opening IP addresses and Ports ####listen {        type = "auth"        ipaddr = 127.0.0.1        port = 18120}listen {        type = "auth"        ipaddr = *        port = 0   limit {        max_connections = 16        lifetime = 0        idle_timeout = 30   }}listen {        type = "acct"        ipaddr = *        port = 0   limit {        max_connections = 16        lifetime = 0        idle_timeout = 30   }}Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnelListening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on proxy address * port 39219Ready to process requests






Best Regards.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
  


More information about the Freeradius-Users mailing list