debug log

[Ryan McGuire]

This is what I get when I do a radtest

Sent Access-Request Id 27 from 0.0.0.0:41113 to 10.108.15.25:1812 length 78
        User-Name = "rmcguire"
        User-Password = "password123"
        NAS-IP-Address = 127.0.1.1
        NAS-Port = 1812
        Message-Authenticator = 0x00
        Cleartext-Password = "password123"
Received Access-Accept Id 27 from 10.108.15.25:1812 to 10.108.15.25:41113 length 36
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Type:0 = VLAN
        Tunnel-Private-Group-Id:0 = "88"

Basically, wanting to know what should I be looking for? Next steps to confirm things are working and then to get my router authentication working for wireless, sorry for all the dumb questions, this is my first time doing this and was hoping that there would be a straight forward tutorial for setting this up

Thanks for any help provided


----------------------------
Ryan McGuire | Systems Administrator
Century Gaming Technologies - Billings
PO Box 21138 Billings, MT 59101
C: 406-860-1299
E: rmcguire at cgtmt.com
W: www.cgtmt.com
Confidentiality Statement:
This e-mail contains confidential information which also may be privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not copy, use, disclose or distribute the e-mail message or any information contained in the message. If you have received this e-mail message in error, please advise the sender by replying to this message or by telephone and then promptly delete it.
----------------------------
From: Alan DeKok <aland at deployingradius.com>
Sent: Wednesday, July 10, 2024 2:32 PM
To: Ryan McGuire <rmcguire at cgtmt.com>
Cc: Jon Gerdes <gerdesj at blueloop.net>; freeradius-users at lists.freeradius.org
Subject: Re: debug log

On Jul 10, 2024, at 3: 05 PM, Ryan McGuire <rmcguire@ cgtmt. com> wrote: > Attached is my log when running ntradping Please just paste the message into the email. That makes it easier to reply in-line, and quote the debug output. Adding


On Jul 10, 2024, at 3:05 PM, Ryan McGuire <rmcguire at cgtmt.com<mailto:rmcguire at cgtmt.com>> wrote:

> Attached is my log when running ntradping



  Please just paste the message into the email.  That makes it easier to reply in-line, and quote the debug output.  Adding it as an attachment just makes it more difficult to help you, which makes it less likely that you will get help.



  And you don't need to use nradping.  The server comes with test tools: radclient / radtest.



  As for the debug output, it doesn't show anything useful.  For one, you've removed almost everything from it, which the documentation says *don't do*.



  For another, the debug output shows it sending an Access-Accept.  OK... what's wrong?  Is there an error?  Do you expect the server to do something else?



  What, exactly, is the problem you need help with?  Can you describe it?



  I really only have limited patience for this kind of "20 questions" game.  If it's clear that I can't help you, then there's no reason for me to try.



  Alan DeKok.