FreeRADIUS didn't send Tunnel type and Id in Access-Accept while using EAP-TTLS authentication

29 Aug 2018

      Hi Team

When I tried to use EAP-TTLS with md5 phase authentication, freeRADIUS
is not sending Tunnel type and Id information to authenticator.

Did anyone notice this problem before?

Supplicant:
========

sudo wpa_supplicant -c /var/run/wpa_supplicant -D wired -i et26
Successfully initialized wpa_supplicant
et26: Associated with 01:80:c2:00:00:03
et26: CTRL-EVENT-EAP-STARTED EAP authentication started
et26: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=4 -> NAK
et26: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
OpenSSL: tls_connection_ca_cert - Failed to load root certificates
error:00000000:lib(0):func(0):reason(0)
et26: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
et26: CTRL-EVENT-EAP-PEER-CERT depth=1
subject='/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=admin@example.org/CN=Example Certificate Authority'
et26: CTRL-EVENT-EAP-PEER-CERT depth=0
subject='/C=FR/ST=Radius/O=Example Inc./CN=Example Server
Certificate/emailAddress=admin@example.org'
et26: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
et26: CTRL-EVENT-CONNECTED - Connection to 01:80:c2:00:00:03 completed
[id=0 id_str=]
^Cet26: CTRL-EVENT-DISCONNECTED bssid=01:80:c2:00:00:03 reason=3
locally_generated=1
et26: CTRL-EVENT-TERMINATING

Snippet of  virtual server and Access-Accept message:
==========================================
(7) Virtual server sending reply
(7)   Tunnel-Medium-Type:0 = IEEE-802
(7)   Tunnel-Type:0 = VLAN
(7)   Tunnel-Private-Group-Id:0 = "101"
(7)   EAP-Message = 0x03010004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "user"
(7) eap_ttls: Got tunneled Access-Accept

(7) Sent Access-Accept Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(7)   MS-MPPE-Recv-Key =
0x7f6794c1502ca356eef3509dc34b924f6467cd01e68d2cee4893f0da254fe042
(7)   MS-MPPE-Send-Key =
0x168decef518d2d20c147d522f2ede40adf2bf12bd6c6c747845fce108d0e4702
(7)   EAP-Message = 0x03080004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "user"
(7) Finished request

Full Radius Server logs:
===============

[root@freeradius-yagna ~]# radiusd -X
FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client 0.0.0.0/0 {
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
0.0.0.0/0. Please fix your configuration
Support for old-style clients will be removed in a future release
 client ::/0 {
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0.
Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
/etc/raddb/sites-enabled/default[540]: Duplicate Auth-Type 'eap'
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:330
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 48325
Listening on proxy address :: port 43031
Ready to process requests
(0) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 125
(0)   User-Name = "user"
(0)   NAS-Port-Id = "Ethernet26"
(0)   NAS-Port-Type = Ethernet
(0)   Calling-Station-Id = "A:A:A:1b:20:d5"
(0)   Called-Station-Id = "A:A:A:01:c8:28"
(0)   Framed-MTU = 9214
(0)   NAS-IP-Address = 172.24.85.245
(0)   EAP-Message = 0x020100090175736572
(0)   Message-Authenticator = 0xf5c4568c50791ea8f5c9f12a86ec4677
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "user", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 9
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0xc68a57f2c688535e
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(0)   EAP-Message = 0x01020016041052fed3fc7ebfa2d4ec58c51045e18e73
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xc68a57f2c688535e5ac878decd35ea4b
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 0 with timestamp +8
(1) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 140
(1)   User-Name = "user"
(1)   NAS-Port-Id = "Ethernet26"
(1)   NAS-Port-Type = Ethernet
(1)   Calling-Station-Id = "A:A:A:1b:20:d5"
(1)   Called-Station-Id = "A:AA:01:c8:28"
(1)   Framed-MTU = 9214
(1)   NAS-IP-Address = 172.24.85.245
(1)   EAP-Message = 0x020200060315
(1)   State = 0xc68a57f2c688535e5ac878decd35ea4b
(1)   Message-Authenticator = 0x67aeee2b4b10eaa00a227c463f067e84
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "user", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1) files: users: Matched entry user at line 30
(1)     [files] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xc68a57f2c688535e
(1) eap: Finished EAP session with state 0xc68a57f2c688535e
(1) eap: Previous EAP request found for state 0xc68a57f2c688535e,
released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Initiating new EAP-TLS session
(1) eap_ttls: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0xc68a57f2c789425e
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(1)   Tunnel-Medium-Type:0 = IEEE-802
(1)   Tunnel-Type:0 = VLAN
(1)   Tunnel-Private-Group-Id:0 = "101"
(1)   EAP-Message = 0x010300061520
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xc68a57f2c789425e5ac878decd35ea4b
(1) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 0 with timestamp +8
(2) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 317
(2)   User-Name = "user"
(2)   NAS-Port-Id = "Ethernet26"
(2)   NAS-Port-Type = Ethernet
(2)   Calling-Station-Id = "A:A:A:1b:20:d5"
(2)   Called-Station-Id = "A:A:A:01:c8:28"
(2)   Framed-MTU = 9214
(2)   NAS-IP-Address = 172.24.85.245
(2)   EAP-Message =
0x020300b7150016030100ac010000a80301813004343d337f46a4d0d2817ef3b8ecb8bdd80df6980edeca97e57c46f48fbb000064c014c00a00390038003700360088008700860085c00fc00500350084c013c0090033003200310030009a0099009800970045004400430042c00ec004002f00960041c0
(2)   State = 0xc68a57f2c789425e5ac878decd35ea4b
(2)   Message-Authenticator = 0x38b30904426fed5f28b7df7fd018edc4
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "user", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 183
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xc68a57f2c789425e
(2) eap: Finished EAP session with state 0xc68a57f2c789425e
(2) eap: Previous EAP request found for state 0xc68a57f2c789425e,
released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: [eaptls verify] = ok
(2) eap_ttls: Done initial handshake
(2) eap_ttls: (other): before/accept initialization
(2) eap_ttls: TLS_accept: before/accept initialization
(2) eap_ttls: <<< recv TLS 1.0 Handshake [length 00ac], ClientHello
(2) eap_ttls: TLS_accept: SSLv3 read client hello A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 003e], ServerHello
(2) eap_ttls: TLS_accept: SSLv3 write server hello A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 08d3], Certificate
(2) eap_ttls: TLS_accept: SSLv3 write certificate A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_ttls: TLS_accept: SSLv3 write key exchange A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_ttls: TLS_accept: SSLv3 write server done A
(2) eap_ttls: TLS_accept: SSLv3 flush data
(2) eap_ttls: TLS_accept: SSLv3 read client certificate A
(2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client
key exchange A
(2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client
key exchange A
(2) eap_ttls: In SSL Handshake Phase
(2) eap_ttls: In SSL Accept mode
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0xc68a57f2c48e425e
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(2)   EAP-Message =
0x010403ec15c000000a74160301003e0200003a0301f7104bd99b35aa476ff63697f9174fe07bb080662524f4e2958ab4f187038c6d00c014000012ff01000100000b000403000102000f00010116030108d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xc68a57f2c48e425e5ac878decd35ea4b
(2) Finished request
Waking up in 4.9 seconds.
(2) Cleaning up request packet ID 0 with timestamp +8
(3) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 140
(3)   User-Name = "user"
(3)   NAS-Port-Id = "Ethernet26"
(3)   NAS-Port-Type = Ethernet
(3)   Calling-Station-Id = "A:A:A:1b:20:d5"
(3)   Called-Station-Id = "A:A:A:01:c8:28"
(3)   Framed-MTU = 9214
(3)   NAS-IP-Address = 172.24.85.245
(3)   EAP-Message = 0x020400061500
(3)   State = 0xc68a57f2c48e425e5ac878decd35ea4b
(3)   Message-Authenticator = 0x187c12fd236634d75d87b153ad931964
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "user", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xc68a57f2c48e425e
(3) eap: Finished EAP session with state 0xc68a57f2c48e425e
(3) eap: Previous EAP request found for state 0xc68a57f2c48e425e,
released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 1004
(3) eap: EAP session adding &reply:State = 0xc68a57f2c58f425e
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(3)   EAP-Message =
0x010503ec15c000000a74f3925dbc68cc68be8006d56bcea251c6dbcdda6bb0c009ab13c2082612d5f8d66dc42b1c3139a7293f1d32e60c91329931f208b0d7996c4ba92b4cb9376320a679f5d38c10201a07afd44c44efcf0004e8308204e4308203cca003020102020900df9121b99f0c6297300d0609
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xc68a57f2c58f425e5ac878decd35ea4b
(3) Finished request
Waking up in 4.9 seconds.
(3) Cleaning up request packet ID 0 with timestamp +8
(4) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 140
(4)   User-Name = "user"
(4)   NAS-Port-Id = "Ethernet26"
(4)   NAS-Port-Type = Ethernet
(4)   Calling-Station-Id = "A:A:A:1b:20:d5"
(4)   Called-Station-Id = "A:A:A:01:c8:28"
(4)   Framed-MTU = 9214
(4)   NAS-IP-Address = 172.24.85.245
(4)   EAP-Message = 0x020500061500
(4)   State = 0xc68a57f2c58f425e5ac878decd35ea4b
(4)   Message-Authenticator = 0xf2aba384519a2b8116794ac9e3c196e3
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "user", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xc68a57f2c58f425e
(4) eap: Finished EAP session with state 0xc68a57f2c58f425e
(4) eap: Previous EAP request found for state 0xc68a57f2c58f425e,
released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer ACKed our handshake fragment
(4) eap_ttls: [eaptls verify] = request
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 698
(4) eap: EAP session adding &reply:State = 0xc68a57f2c28c425e
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(4)   EAP-Message =
0x010602ba158000000a74130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100131af9eaa59dc1070b604ff0253094972ee5c947141f
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xc68a57f2c28c425e5ac878decd35ea4b
(4) Finished request
Waking up in 4.9 seconds.
(4) Cleaning up request packet ID 0 with timestamp +8
(5) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 274
(5)   User-Name = "user"
(5)   NAS-Port-Id = "Ethernet26"
(5)   NAS-Port-Type = Ethernet
(5)   Calling-Station-Id = "A:A:A:1b:20:d5"
(5)   Called-Station-Id = "A:A:A:01:c8:28"
(5)   Framed-MTU = 9214
(5)   NAS-IP-Address = 172.24.85.245
(5)   EAP-Message =
0x0206008c15001603010046100000424104679b2ae43fb50d0b49b40e4ed4e8de009085c7b27d63deee0cdc41ecda3cf18c4b9bb3fd9c9526a37a26cc4c638edef2c19839db81c0a628cdf2dff8360f9ba5140301000101160301003012b315da2cd22369ef0ca9ee72097fcdb36651cd14717f60281d3a
(5)   State = 0xc68a57f2c28c425e5ac878decd35ea4b
(5)   Message-Authenticator = 0xd99b49149e20ad4fb685042749a13c93
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "user", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 140
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xc68a57f2c28c425e
(5) eap: Finished EAP session with state 0xc68a57f2c28c425e
(5) eap: Previous EAP request found for state 0xc68a57f2c28c425e,
released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: [eaptls verify] = ok
(5) eap_ttls: Done initial handshake
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(5) eap_ttls: TLS_accept: SSLv3 read certificate verify A
(5) eap_ttls: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls: TLS_accept: SSLv3 read finished A
(5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls: TLS_accept: SSLv3 write finished A
(5) eap_ttls: TLS_accept: SSLv3 flush data
(5) eap_ttls: (other): SSL negotiation finished successfully
(5) eap_ttls: SSL Connection Established
(5) eap_ttls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 7 length 69
(5) eap: EAP session adding &reply:State = 0xc68a57f2c38d425e
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(5)   EAP-Message =
0x0107004515800000003b14030100010116030100308f33b781dac287145557273c5fa81093a87c6beca3c9969cf2ba2c0a74c33c3bc96f65692d8a6899419e3c3f39b30d24
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xc68a57f2c38d425e5ac878decd35ea4b
(5) Finished request
Waking up in 4.9 seconds.
(5) Cleaning up request packet ID 0 with timestamp +8
(6) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 230
(6)   User-Name = "user"
(6)   NAS-Port-Id = "Ethernet26"
(6)   NAS-Port-Type = Ethernet
(6)   Calling-Station-Id = "A:1b:20:d5"
(6)   Called-Station-Id = "A:01:c8:28"
(6)   Framed-MTU = 9214
(6)   NAS-IP-Address = 172.24.85.245
(6)   EAP-Message =
0x0207006015001703010020b13ce64274e77ee82bdc9872c34983f76a5e9478587af393f895eebd880575b41703010030cfc55af5a50800b4f6d3bb54d66488568602e3ff7edc4ca128a24a6bd75a16646a8195b30ea841f9d2de586ff320c187
(6)   State = 0xc68a57f2c38d425e5ac878decd35ea4b
(6)   Message-Authenticator = 0xb631d30eda26119f7cf7ecf94eb57a4b
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "user", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 96
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xc68a57f2c38d425e
(6) eap: Finished EAP session with state 0xc68a57f2c38d425e
(6) eap: Previous EAP request found for state 0xc68a57f2c38d425e,
released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: [eaptls verify] = ok
(6) eap_ttls: Done initial handshake
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   EAP-Message = 0x020000090175736572
(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Got tunneled identity of user
(6) eap_ttls: Setting default EAP type for tunneled EAP session
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x020000090175736572
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "user"
(6) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "user", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 0 length 9
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_md5 to process data
(6) eap_md5: Issuing MD5 Challenge
(6) eap: Sending EAP Request (code 1) ID 1 length 22
(6) eap: EAP session adding &reply:State = 0xd0215ee2d0205ac2
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x0101001604109fa62c4c675ccbe94a61b7b4d4042138
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xd0215ee2d0205ac21ae00777c835cc81
(6) eap_ttls: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 79
(6) eap: EAP session adding &reply:State = 0xc68a57f2c082425e
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(6)   EAP-Message =
0x0108004f1580000000451703010040a2973912d62bcef98563ade1bcc6067b2b73e2fe1cbbf4c1e8b96afcbed378b53883725ca74473df40d7d8cd73b5a39eb12ceffe9532185ddfbc8bf5611d499c
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xc68a57f2c082425e5ac878decd35ea4b
(6) Finished request
Waking up in 4.9 seconds.
(6) Cleaning up request packet ID 0 with timestamp +8
(7) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 246
(7)   User-Name = "user"
(7)   NAS-Port-Id = "Ethernet26"
(7)   NAS-Port-Type = Ethernet
(7)   Calling-Station-Id = "A:1b:20:d5"
(7)   Called-Station-Id = "A:01:c8:28"
(7)   Framed-MTU = 9214
(7)   NAS-IP-Address = 172.24.85.245
(7)   EAP-Message =
0x0208007015001703010020117cc179fca36a1b24e3f8bc547a639a51dd747fddfc93f9872fe49b609a780e17030100402326bf769bab17f5bed70f3087955116a91470a2bd7f70feb590b0c08bbe8386acc99da439b8c04f2188ad36e6cc1e988c996d66293d82ee4540c7c57d355924
(7)   State = 0xc68a57f2c082425e5ac878decd35ea4b
(7)   Message-Authenticator = 0xf5fd8b069858a4eb532fde8c4b2db846
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "user", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 112
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xd0215ee2d0205ac2
(7) eap: Finished EAP session with state 0xc68a57f2c082425e
(7) eap: Previous EAP request found for state 0xc68a57f2c082425e,
released from the list
(7) eap: Peer sent packet with method EAP TTLS (21)
(7) eap: Calling submodule eap_ttls to process data
(7) eap_ttls: Authenticate
(7) eap_ttls: Continuing EAP-TLS
(7) eap_ttls: [eaptls verify] = ok
(7) eap_ttls: Done initial handshake
(7) eap_ttls: [eaptls process] = ok
(7) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(7) eap_ttls: Got tunneled request
(7) eap_ttls:   EAP-Message = 0x0201001604102b48d29eccb8a144715231d394679abb
(7) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_ttls: Sending tunneled request
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x0201001604102b48d29eccb8a144715231d394679abb
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "user"
(7)   State = 0xd0215ee2d0205ac21ae00777c835cc81
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "user", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 1 length 22
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7) files: users: Matched entry user at line 30
(7)       [files] = ok
(7)       [expiration] = noop
(7)       [logintime] = noop
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0xd0215ee2d0205ac2
(7) eap: Finished EAP session with state 0xd0215ee2d0205ac2
(7) eap: Previous EAP request found for state 0xd0215ee2d0205ac2,
released from the list
(7) eap: Peer sent packet with method EAP MD5 (4)
(7) eap: Calling submodule eap_md5 to process data
(7) eap: Sending EAP Success (code 3) ID 1 length 4
(7) eap: Freeing handler
(7)       [eap] = ok
(7)     } # authenticate = ok
(7)   # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel
(7)     post-auth {
(7)       if (0) {
(7)       if (0)  -> FALSE
(7)     } # post-auth = noop
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   Tunnel-Medium-Type:0 = IEEE-802
(7)   Tunnel-Type:0 = VLAN
(7)   Tunnel-Private-Group-Id:0 = "101"
(7)   EAP-Message = 0x03010004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "user"
(7) eap_ttls: Got tunneled Access-Accept
(7) eap: Sending EAP Success (code 3) ID 8 length 4
(7) eap: Freeing handler
(7)     [eap] = ok
(7)   } # authenticate = ok
(7) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(7)   post-auth {
(7)     update {
(7)       No attributes updated
(7)     } # update = noop
(7)     [exec] = noop
(7)     policy remove_reply_message_if_eap {
(7)       if (&reply:EAP-Message && &reply:Reply-Message) {
(7)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(7)       else {
(7)         [noop] = noop
(7)       } # else = noop
(7)     } # policy remove_reply_message_if_eap = noop
(7)   } # post-auth = noop
(7) Sent Access-Accept Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(7)   MS-MPPE-Recv-Key =
0x7f6794c1502ca356eef3509dc34b924f6467cd01e68d2cee4893f0da254fe042
(7)   MS-MPPE-Send-Key =
0x168decef518d2d20c147d522f2ede40adf2bf12bd6c6c747845fce108d0e4702
(7)   EAP-Message = 0x03080004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "user"
(7) Finished request
Waking up in 4.9 seconds.
(7) Cleaning up request packet ID 0 with timestamp +8
Ready to process requests
^C

Best Regards
Yagna

FreeRADIUS didn't send Tunnel type and Id in Access-Accept while using EAP-TTLS authentication

Phani Siriki