Sure - but that ain't working.. at least not on my switches and don't ask me why... I usually have 2-3 computers on one port ( but computers have the same VLANID in RADIUS ), so might that be the problem? Regards, Edvin Seferovic _____ From: freeradius-users-bounces@lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] On Behalf Of Jeff Reilly Sent: Sonntag, 13. November 2005 21:58 To: FreeRadius users mailing list Subject: RE: assigning a vlan-id after successful authentication First, this information is well documented both by ProCurve and in RFC3580. That said the AV pairs you're looking for are as follows: Tunnel-Medium-Type = 802 Tunnel-Private-Group-ID = 123 (the VLAN) Tunnel-Type = VLAN Jeff -------- Original Message -------- Subject: assigning a vlan-id after successful authentication From: Sven Juergensen <sjuergensen@tng.de> Date: Fri, November 11, 2005 8:48 pm To: freeradius-users@lists.freeradius.org hello people, how does the above mentioned work? i am not quite sure where to start. is it embedded in the 'Reply-Message' or does it have to do with the tunnel-types? i'm trying to supply a vlan-id to an hp2626 with mac-based authentication. couldn't find this in the faq or relevant conf-files either - what am i missing? thanks alot in advance, sven - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html