I believe you can only use the actual vid and not a vlan name (i.e. VLAN_200) in the vlan and access lists. At least under the older TDD builds this is the case, so I presume the same limitations apply to the 16e services. Ben On Tue, Dec 14, 2010 at 6:59 AM, Wilson, Stuart <swilso19@harris.com> wrote:
I cannot get our Alvarion BS to assign service profiles to a MS. I have read the forums and tried to use that information to help, but I cannot get a service profile to be assigned. Our setup is as follows:
FreeRADIUS AAA with MySQL database.
The radgroupreply is:
8 | MLB_MS | Filter-ID | = | "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON"
The radusergroup is:
MLB_LAB_MS2@WiMax.com | MLB_MS | 1 |
a sample from radiusd -x
Access-Request:
Access-Request packet from host 192.168.254.253 port 49154, id=109, length=258
User-Name = "{am=1}6ced97d91a6fcef3419e70f9c7ff34c1@WiMax.com"
NAS-IP-Address = 192.168.254.253
NAS-Port-Type = 27
NAS-Port = 3
Calling-Station-Id = "\000\020\347A\\d"
NAS-Identifier = "002002002000065002"
WiMAX-GMT-Timezone-offset = 18000
Framed-MTU = 1490
Service-Type = Framed-User
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-BS-Id = 0x303032303032303032303030303635303032
EAP-Message = 0x02010035017b616d3d317d36636564393764393161366663656633343139653730663963376666333463314057694d61782e636f6d
Message-Authenticator = 0x4277326335201e6d8fa3f8a26a9311d7
Access-Accept:
Sending Access-Accept of id 108 to 192.168.254.253 port 49154
Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=OFF"
WiMAX-FA-RK-Key = 0x00
WiMAX-MSK = 0x
TTLS Reply:
[ttls] Got tunneled reply code 2
Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON"
MS-CHAP2-Success = 0x98533d41334643344439373546424136454339433135323941323643313844373437434542313443453330
MS-MPPE-Recv-Key = 0x095bfcafbd7e6970eb5762a77b159f59
MS-MPPE-Send-Key = 0x4d060be03b8d2c8939627ade2f95c539
MS-MPPE-Encryption-Policy = 0x00000001
MS-MPPE-Encryption-Types = 0x00000006
The most helpful information would be a guide on how to configure FreeRADIUS and the associated MySQL server to apply a service profile to a MS.
Thanks for the help.
Stuart Wilson
Email: ***swilso19@harris.com* <swilso19@harris.com>
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html