Re: RADIUS + LDAP authentication problem

25 Apr 2012

      Hi Alexander,

Start by checking this table, check how the passwords are stored in your
ldap and then you will know what kind of protocols you can use with it.

I was working on the same thing, my ldap stores the password in SHA
encryption so I am only able to use PAP protocol on the supplicant (laptops)
, PAP does not exist natively on windows therefore I had to install a
third-party software (supplicant) on the laptops in order for the
authentication to work.

If the passwords are stored in clear-text, then you could use any protocol.

Wassim.

From:  Alexander Kulbiy <alexander.kulbiy@wildix.com>
Reply-To:  FreeRadius users mailing list
<freeradius-users@lists.freeradius.org>
Date:  Wednesday, April 25, 2012 1:47 PM
To:  <freeradius-users@lists.freeradius.org>
Subject:  RADIUS + LDAP authentication problem

Hello all, 

I'm trying to configure RADIUS server that would be used for authentication
of users in Wi-Fi network with WPA-enterprise encryption. To do this I'm
trying to use EAP + LDAP inside of freeradius.
The problem is that I see in log:

++[ldap] returns ok
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting
the user
Failed to authenticate the user.

After this client fails aithentication. Here is full log of freeradius -X:

FreeRADIUS Version 2.1.10, for host i486-pc-linux-gnu, built on Nov 14 2010
at 20:41:03
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/ldap
including configuration file
/etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/detail.example.com
<http://detail.example.com>
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = yes
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com <http://example.com>  {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        nastype = "other"
 }
 client 192.168.0.0/16 <http://192.168.0.0/16>  {
        require_message_authenticator = no
        secret = "wildix--dix"
        shortname = "private-network-2"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
 Module: Linked to module rlm_expiration
 Module: Instantiating module "expiration" from file
/etc/freeradius/modules/expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating module "logintime" from file
/etc/freeradius/modules/logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
 Module: Linked to module rlm_mschap
 Module: Instantiating module "mschap" from file
/etc/freeradius/modules/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
 Module: Linked to module rlm_ldap
 Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap
  ldap {
        server = "ldap-test.wildix.in <http://ldap-test.wildix.in> "
        port = 389
        password = "wil--pdc"
        identity = "cn=admin,dc=wildix,dc=local"
        net_timeout = 10
        timeout = 4
        timelimit = 3
        tls_mode = no
        start_tls = no
        tls_require_cert = "allow"
   tls {
        start_tls = no
        require_cert = "allow"
   }
        basedn = "ou=People,dc=wildix,dc=local"
        filter = "(cn=%{%{Stripped-User-Name}:-%{User-Name}})"
        base_filter = "(objectclass=radiusprofile)"
        auto_header = no
        access_attr_used_for_allow = yes
        groupname_attribute = "cn"
        groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupO
fUniqueNames)(uniquemember=%{Ldap-UserDn})))"
        dictionary_mapping = "/etc/freeradius/ldap.attrmap"
        ldap_debug = 40
        ldap_connections_number = 5
        compare_check_items = no
        do_xlat = yes
        edir_account_policy_check = no
        set_auth_type = no
  }
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file
/etc/freeradius/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
Tunnel-Private-Group-Id
conns: 0xa15b000
 Module: Linked to module rlm_eap
 Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
  eap {
        default_eap_type = "ttls"
        timer_expire = 10
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 2048
  }
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
        challenge = "Password: "
        auth_type = "LDAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        CA_path = "/etc/freeradius/certs"
        pem_file_type = yes
        private_key_file = "/etc/freeradius/certs/server.key"
        certificate_file = "/etc/freeradius/certs/server.pem"
        CA_file = "/etc/freeradius/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/etc/freeradius/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "gtc"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "gtc"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating module "suffix" from file
/etc/freeradius/modules/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating module "files" from file
/etc/freeradius/modules/files
  files {
        usersfile = "/etc/freeradius/users"
        acctusersfile = "/etc/freeradius/acct_users"
        preproxy_usersfile = "/etc/freeradius/preproxy_users"
        compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating module "radutmp" from file
/etc/freeradius/modules/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/modules/attr_filter
  attr_filter attr_filter.access_reject {
        attrsfile = "/etc/freeradius/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
server { # from file /etc/freeradius/radiusd.conf
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file
/etc/freeradius/modules/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/huntgroups"
        hints = "/etc/freeradius/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Instantiating module "ntdomain" from file
/etc/freeradius/modules/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = no
  }
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.

rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=0,
length=148
        User-Name = "alexander.duts"
        NAS-IP-Address = 192.168.1.150
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "54-04-A6-E9-43-10"
        Calling-Station-Id = "60-C5-47-99-DC-E2"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x0201001301616c6578616e6465722e64757473
        Message-Authenticator = 0x45a7c02b2bc257737c8ba12abc372b5c
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 1 length 19
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for alexander.duts
[ldap]  expand: %{Stripped-User-Name} ->
[ldap]  ... expanding second conditional
[ldap]  expand: %{User-Name} -> alexander.duts
[ldap]  expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(cn=alexander.duts)
[ldap]  expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local
  [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] attempting LDAP reconnection
  [ldap] (re)connect to ldap-test.wildix.in:389
<http://ldap-test.wildix.in:389> , authentication 0
  [ldap] bind as cn=admin,dc=wildix,dc=local/wil--pdc to
ldap-test.wildix.in:389 <http://ldap-test.wildix.in:389>
  [ldap] waiting for bind result ...
  [ldap] Bind was successful
  [ldap] performing search in ou=People,dc=wildix,dc=local, with filter
(cn=alexander.duts)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
  [ldap] userPassword -> Password-With-Header ==
"{MD5}ibKj45B56xWdI2wgngTn5A=="
[ldap] looking for reply items in directory...
[ldap] user alexander.duts authorized to use remote access
  [ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.150 port 32769
        EAP-Message = 0x010200061520
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xba753fceba772a527d9425cf769c2e59
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=1,
length=279
        User-Name = "alexander.duts"
        NAS-IP-Address = 192.168.1.150
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "54-04-A6-E9-43-10"
        Calling-Station-Id = "60-C5-47-99-DC-E2"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x0202008415800000007a16030100750100007103014f97d3f69920e670b14209ada72b804e
54dd3d8e76f9966dcf85add2b044c47c000036c00ac009c007c008c013c014c011c012c004c0
05c002c003c00ec00fc00cc00d002f000500040035000a003200330038003900160013010000
12000a00080006001700180019000b00020100
        State = 0xba753fceba772a527d9425cf769c2e59
        Message-Authenticator = 0xac3d792374214db61afd78a7273cdb11
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 2 length 132
[eap] Continuing tunnel setup.
++[eap] returns ok
++[files] returns noop
[ldap] performing user authorization for alexander.duts
[ldap]  expand: %{Stripped-User-Name} ->
[ldap]  ... expanding second conditional
[ldap]  expand: %{User-Name} -> alexander.duts
[ldap]  expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(cn=alexander.duts)
[ldap]  expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local
  [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] performing search in ou=People,dc=wildix,dc=local, with filter
(cn=alexander.duts)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
  [ldap] userPassword -> Password-With-Header ==
"{MD5}ibKj45B56xWdI2wgngTn5A=="
[ldap] looking for reply items in directory...
[ldap] user alexander.duts authorized to use remote access
  [ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
  TLS Length 122
[ttls] Length Included
[ttls] eaptls_verify returned 11
[ttls]     (other): before/accept initialization
[ttls]     TLS_accept: before/accept initialization
[ttls] <<< TLS 1.0 Handshake [length 0075], ClientHello
[ttls]     TLS_accept: SSLv3 read client hello A
[ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello
[ttls]     TLS_accept: SSLv3 write server hello A
[ttls] >>> TLS 1.0 Handshake [length 02c2], Certificate
[ttls]     TLS_accept: SSLv3 write certificate A
[ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[ttls]     TLS_accept: SSLv3 write server done A
[ttls]     TLS_accept: SSLv3 flush data
[ttls]     TLS_accept: Need to read more data: SSLv3 read client certificate
A
In SSL Handshake Phase
In SSL Accept mode 
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 1 to 192.168.1.150 port 32769
        EAP-Message =
0x010303091580000002ff160301002a0200002603014f97d185e6ccf528844dce72d2c31e3b
5de6d7ff909e8b43243627a9ecc6181300002f0016030102c20b0002be0002bb0002b8308202
b43082019c020900f41bcab70f7d95eb300d06092a864886f70d0101050500301c311a301806
035504031311646f6d61696e2e77696c6469782e636f6d301e170d3131303831383038353834
315a170d3231303831353038353834315a301c311a301806035504031311646f6d61696e2e77
696c6469782e636f6d30820122300d06092a864886f70d01010105000382010f003082010a02
82010100bb18b7a3da0a4d6289e1b0ded28da6ec10c3bf97e97b
        EAP-Message =
0x4dbb7aea52254af1f0a4ebd21661db4435fb81b94a95685cade22cd8af456649ae92a82f1f
909145f0936dd132c8ad15462c4abcbbd8b8b00b7d38b47b7dfe8bfa53a95b5f581809cc9dd8
58985a153cf110d17a6c87afa2a889bb52febe8695e5bac521dcf44ef94d8768f959b1b99e21
e7024a539f39b22c1a9a02e70ac68cdeb153b6b32e454d54714438958653955a3ee223d93a80
4453be00acd4ad0938724a7342fb895808e586a891d13e4ddbceb2e871f9a55292399aac9dd1
b3db0fd3dff8688ed75789640f2854f782e7c8c1ea15c9e000f75c6bb9140a18992f60346be6
73f1f5742b42990203010001300d06092a864886f70d01010505
        EAP-Message =
0x000382010100aeb4d05fb7d05508e4832c0a5085130bb13806a6749d9f179d4add128162d5
d3435e6031b64591af7fb08414d9c7de87807e7b002ba625f9bb4d29ad817ce3b4a47026bcc1
58a3cbf2342607bb6d9c150c1dbb60726f8d66a58e5a3ffcd1220fd1f483841404d5bd2c969a
81b88a59f04c997ca82c970e81699259a502d152187a2bb6b2ed04bbed632779709bf8548b8e
5ea6b5057cd02717996b73912024572934718a66e82175b33225549a766f80ca4f7c867012b7
4132c0cfc7e914e408caa189ef91f853a0730dd6c086b4f84fe82f59ec83fdf99958d3c7bdad
1f17833eb56bbcec13d55bb9366ffe31f79fb907f293dd2c44c7
        EAP-Message = 0xc6b8a7b9020d795f9016030100040e000000
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xba753fcebb762a527d9425cf769c2e59
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=2,
length=485
        User-Name = "alexander.duts"
        NAS-IP-Address = 192.168.1.150
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "54-04-A6-E9-43-10"
        Calling-Station-Id = "60-C5-47-99-DC-E2"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x020301501580000001461603010106100001020100702ffd52295b1d85923a25f173c2272d
25023c306be0f5c638c06519b02642b90f97c28b77fe9186877f347e731c84ebf96453b61ccf
b89828a46909d5af697fee8cf60334b6dfda77225527a2fe2c05bfc5e5b748bed837f3314727
6c6100b59888817be06b02ee72d6c75fdeaa70d7df75dcb91e7246377645539a8e6d5a976dde
aee85298953a5cb2fee1fe12fff90975ec12341b457a930d773a6d70512e932d974bc5fafc5b
9264005c5979a903f6ceaccdade2219262dafe0aecdf66dff4455bc30bd98a17cf4832ab4daf
00b1ec9c514d084bcf9468e388b0085c8bf0410aa15ac021ce56
        EAP-Message =
0xfd432ce00489d4b939bbfd2d5433f345a9aecd4ab4f4248314030100010116030100300671
40ba5efb9def7fc906cb34b89dcebef50295e5fa9755a325a9a9dfe4f2542180467c4292a7c9
8c5238fdcfdaed9c
        State = 0xba753fcebb762a527d9425cf769c2e59
        Message-Authenticator = 0x7b76cb05216a62e94fc85496c11d6baf
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 3 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
++[files] returns noop
[ldap] performing user authorization for alexander.duts
[ldap]  expand: %{Stripped-User-Name} ->
[ldap]  ... expanding second conditional
[ldap]  expand: %{User-Name} -> alexander.duts
[ldap]  expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(cn=alexander.duts)
[ldap]  expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local
  [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] performing search in ou=People,dc=wildix,dc=local, with filter
(cn=alexander.duts)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
  [ldap] userPassword -> Password-With-Header ==
"{MD5}ibKj45B56xWdI2wgngTn5A=="
[ldap] looking for reply items in directory...
[ldap] user alexander.duts authorized to use remote access
  [ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
  TLS Length 326
[ttls] Length Included
[ttls] eaptls_verify returned 11
[ttls] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
[ttls]     TLS_accept: SSLv3 read client key exchange A
[ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[ttls] <<< TLS 1.0 Handshake [length 0010], Finished
[ttls]     TLS_accept: SSLv3 read finished A
[ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[ttls]     TLS_accept: SSLv3 write change cipher spec A
[ttls] >>> TLS 1.0 Handshake [length 0010], Finished
[ttls]     TLS_accept: SSLv3 write finished A
[ttls]     TLS_accept: SSLv3 flush data
[ttls]     (other): SSL negotiation finished successfully
SSL Connection Established
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 2 to 192.168.1.150 port 32769
        EAP-Message =
0x0104004515800000003b14030100010116030100307071fceb1625b177a9f2e70894cceddf
2d539a238ef606f1c9d735aee7b3fac6b23a23dd627b54dfa1494970914ad7f1
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xba753fceb8712a527d9425cf769c2e59
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=3,
length=306
        User-Name = "alexander.duts"
        NAS-IP-Address = 192.168.1.150
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "54-04-A6-E9-43-10"
        Calling-Station-Id = "60-C5-47-99-DC-E2"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x0204009f1580000000951703010090a6050d6dfa5a020ed480b3a256bdee65722fdfc2eca0
ed63507fff0309dc956a1f3327abd3cf051fb6f5fb2dd1f97a528b9bc23d3ba5e64eadec0e49
f26bb731614c7d800085ac313b6fc1ead9a2779d7377d3c099cc74fc62315a1b23d6651385b6
9d502086f64b90fbacd0832cf2dc0ff4671ad4ea15326a3ad5ad1ce7a91025781097a47a5925
5b0fa9b99d6567ea
        State = 0xba753fceb8712a527d9425cf769c2e59
        Message-Authenticator = 0x97bc7ad1a50b740583db42cd83c152a6
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 4 length 159
[eap] Continuing tunnel setup.
++[eap] returns ok
++[files] returns noop
[ldap] performing user authorization for alexander.duts
[ldap]  expand: %{Stripped-User-Name} ->
[ldap]  ... expanding second conditional
[ldap]  expand: %{User-Name} -> alexander.duts
[ldap]  expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(cn=alexander.duts)
[ldap]  expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local
  [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] performing search in ou=People,dc=wildix,dc=local, with filter
(cn=alexander.duts)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
  [ldap] userPassword -> Password-With-Header ==
"{MD5}ibKj45B56xWdI2wgngTn5A=="
[ldap] looking for reply items in directory...
[ldap] user alexander.duts authorized to use remote access
  [ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
  TLS Length 149
[ttls] Length Included
[ttls] eaptls_verify returned 11
[ttls] eaptls_process returned 7
[ttls] Session established.  Proceeding to decode tunneled attributes.
[ttls] Got tunneled request
        User-Name = "alexander.duts"
        MS-CHAP-Challenge = 0xa6d98f587da2024f7a6513f2e991d261
        MS-CHAP2-Response =
0x7a004794198aef4fbcb66d3e389079ed41560000000000000000fa8c2cdf0c49219574c082
6b377c9d6ca977ece95f465ae4
        FreeRADIUS-Proxied-To = 127.0.0.1
[ttls] Sending tunneled request
        User-Name = "alexander.duts"
        MS-CHAP-Challenge = 0xa6d98f587da2024f7a6513f2e991d261
        MS-CHAP2-Response =
0x7a004794198aef4fbcb66d3e389079ed41560000000000000000fa8c2cdf0c49219574c082
6b377c9d6ca977ece95f465ae4
        FreeRADIUS-Proxied-To = 127.0.0.1
server  {
# Executing section authorize from file 
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[ldap] performing user authorization for alexander.duts
[ldap]  expand: %{Stripped-User-Name} -> 
[ldap]  ... expanding second conditional
[ldap]  expand: %{User-Name} -> alexander.duts
[ldap]  expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> 
(cn=alexander.duts)
[ldap]  expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local
127.0.0.1       localhost
127.0.1.1       testbox.wildix.com.ua <http://testbox.wildix.com.ua>    
testbox
#192.168.1.171  test
#192.168.1.171  out.pbx.wildix.com <http://out.pbx.wildix.com> 
#192.168.1.171  192_168_1_113.out.pbx.wildix.com 
<http://192_168_1_113.out.pbx.wildix.com> 
192.168.1.199   192.168.1.195

  [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] performing search in ou=People,dc=wildix,dc=local, with filter 
(cn=alexander.duts)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
  [ldap] userPassword -> Password-With-Header == 
"{MD5}ibKj45B56xWdI2wgngTn5A=="
[ldap] looking for reply items in directory...
[ldap] user alexander.duts authorized to use remote access
  [ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting 
the user
Failed to authenticate the user.
} # server 
[ttls] Got tunneled reply code 3
[ttls] Got tunneled Access-Reject
[eap] Handler failed in EAP/ttls
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
  WARNING: Unknown value specified for Post-Auth-Type.  Cannot perform 
requested action.
Delaying reject of request 3 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=3, 
length=306
Waiting to send Access-Reject to client private-network-2 port 32769 - ID: 3
Waking up in 0.1 seconds.
Sending delayed reject for request 3
Sending Access-Reject of id 3 to 192.168.1.150 port 32769
        EAP-Message = 0x04040004
        Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
Cleaning up request 0 ID 0 with timestamp +151
Cleaning up request 1 ID 1 with timestamp +152
Cleaning up request 2 ID 2 with timestamp +152
Waking up in 1.0 seconds.
Cleaning up request 3 ID 3 with timestamp +152
Ready to process requests.

Does anyone have idea what could be the problem?

Thanks in advance,
Alexander
- List info/subscribe/unsubscribe? See 
http://www.freeradius.org/list/users.html

Re: RADIUS + LDAP authentication problem

Wassim Zaarour