Hi. I have been struggling with this for about a week now. We just purchased an HP M200 access point to replace an old cisco. We are using EAP-TLS using certificates. Here is what I have done so far. I have both access points using the same freeRadius2 server which is running FreeBSD 9 The client can authenticate using the certificate through the cisco. The client can authenticate using PAP through the HP The client cannot authenticate using the certificate through the HP. I get the following message Cleaning up request 0 ID 206 with timestamp +281 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xe4bd4b63e4b14652 did not finish! WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cleaning up request 1 ID 248 with timestamp +281 Cleaning up request 2 ID 239 with timestamp +281 Cleaning up request 3 ID 167 with timestamp +281 Cleaning up request 4 ID 102 with timestamp +281 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x8c4bc3ec8f5acec4 did not finish! WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I have looked through everything I can find and I can't seem to get it to work. Gordon Cook Network Administrator Sault Ste Marie Innovation Centre Work: 705-942-6938 x3042 Cell: 705-971-3852 [comptia]<http://www.comptia.com/> [ssmic-one-2013]
