Inner-Tunnel User-Name

22 Nov 2013

      In the default inner-tunnel post-auth block there's a config block to inject the real username into the outer Access-Accept, however it doesn't seem to do that on FreeRADIUS 3/3.1:

  (6)   post-auth {
  (6)   update outer.reply {
  (6) eap_ttls :  expand: "%{request:User-Name}" -> '@local.com'
  (6) eap_ttls :          User-Name = "@local.com"
  (6)   } # update outer.reply = noop
  (6)  } #  post-auth = noop

My understanding is that %{request:User-Name} should have expanded to 'steve@local.com'.

Am I misinterpreting what the block does, or is this a bug?

Thanks,

Adam Bishop

 gpg: 0x6609D460

Janet, the UK's research and education network.

--- debug.log ---

[root@skeletor sbin]# radiusd -X
radiusd: FreeRADIUS Version 3.1.0 (git #3965001), for host x86_64-unknown-linux-gnu, built on Nov 22 2013 at 15:39:10
Copyright (C) 1999-2013 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/default
main {
 security {
        allow_core_dumps = no
 }
}
main {
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        sbindir = "/usr/local/sbin"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
        libdir = "/usr/local/lib"
        radacctdir = "/usr/local/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/usr/local/var/log/radius/linelog"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "%{%{Packet-Type}:-format}"
  }
  # Loaded module rlm_always
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Loaded module rlm_exec
  # Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        dir_permissions = 493
        locking = no
        log_packet_header = no
  }
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/usr/local/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Instantiating module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
  }
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 16384
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
        auto_header = no
        normalise = yes
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        mod_accounting_username_bug = no
        max_sessions = 4096
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        ca_path = "/usr/local/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/usr/local/etc/raddb/certs/server.pem"
        certificate_file = "/usr/local/etc/raddb/certs/server.pem"
        ca_file = "/usr/local/etc/raddb/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/usr/local/etc/raddb/certs/dh"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_method = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
  # Instantiating module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/usr/local/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
        filename = "/usr/local/etc/raddb/mods-config/files/authorize"
        usersfile = "/usr/local/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
        compat = "no"
  }
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        dir_permissions = 493
        locking = no
        log_packet_header = no
  }
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        dir_permissions = 493
        locking = no
        log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        dir_permissions = 493
        locking = no
        log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        dir_permissions = 493
        locking = no
        log_packet_header = no
  }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
WARNING: Ignoring "sql" (see raddb/mods-available/README.rst)
WARNING: Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
WARNING: Ignoring "sql" (see raddb/mods-available/README.rst)
} # server inner-tunnel
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading virtual module filter_username
WARNING: Ignoring "sql" (see raddb/mods-available/README.rst)
WARNING: Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading virtual module acct_unique
 # Loading accounting {...}
WARNING: Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading post-proxy {...}
 # Loading post-auth {...}
WARNING: Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading virtual module remove_reply_message_if_eap
 # Loading virtual module remove_reply_message_if_eap
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Opening new proxy address * port 1814
Listening on proxy address * port 1814
Ready to process requests
rad_recv: Access-Request packet from host 127.0.0.1 port 34960, id=0, length=128
        User-Name = '@local.com'
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = '02-00-00-00-00-01'
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = 'CONNECT 11Mbps 802.11b'
        EAP-Message = 0x0200000f01406c6f63616c2e636f6d
        Message-Authenticator = 0xb0eb6d57455df58ddcd61a6bd2a0d8d2
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)    ? if (!User-Name)
(0)    ? if (!User-Name)  -> FALSE
(0)    ? if (User-Name != "%{tolower:%{User-Name}}")
(0)     expand: "%{tolower:%{User-Name}}" -> '@local.com'
(0)    ? if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(0)    ? if (User-Name =~ / /)
(0)    ? if (User-Name =~ / /)  -> FALSE
(0)    ? if (User-Name =~ /@.*@/ )
(0)    ? if (User-Name =~ /@.*@/ )  -> FALSE
(0)    ? if (User-Name =~ /\\.\\./ )
(0)    ? if (User-Name =~ /\\.\\./ )  -> FALSE
(0)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(0)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(0)    ? if (User-Name =~ /\\.$/)
(0)    ? if (User-Name =~ /\\.$/)   -> FALSE
(0)    ? if (User-Name =~ /@\\./)
(0)    ? if (User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [preprocess] = ok
(0)   [chap] = noop
(0)   [mschap] = noop
(0)   [digest] = noop
(0) suffix : Looking up realm "local.com" for User-Name = "@local.com"
(0) suffix : No such realm "local.com"
(0)   [suffix] = noop
(0) eap : EAP packet type response id 0 length 15
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)   [eap] = ok
(0)  } #  authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap : Peer sent Identity (1)
(0) eap : Calling eap_md5 to process EAP data
rlm_eap_md5: Issuing Challenge
(0) eap : New EAP session, adding 'State' attribute to reply 0xfb6cee96fb6deabf
(0)   [eap] = handled
(0)  } #  authenticate = handled
Sending Access-Challenge of id 0 from 127.0.0.1 port 1812 to 127.0.0.1 port 34960
        EAP-Message = 0x01010016041026085380dcee9b048369ca482f0c9df9
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xfb6cee96fb6deabfe758ceb5654c59b3
(0) Finished request 0.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 34960, id=1, length=137
        User-Name = '@local.com'
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = '02-00-00-00-00-01'
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = 'CONNECT 11Mbps 802.11b'
        EAP-Message = 0x020100060315
        State = 0xfb6cee96fb6deabfe758ceb5654c59b3
        Message-Authenticator = 0x497e51e395117c1e54eabec2390bb476
(1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(1)   authorize {
(1)   filter_username filter_username {
(1)    ? if (!User-Name)
(1)    ? if (!User-Name)  -> FALSE
(1)    ? if (User-Name != "%{tolower:%{User-Name}}")
(1)     expand: "%{tolower:%{User-Name}}" -> '@local.com'
(1)    ? if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(1)    ? if (User-Name =~ / /)
(1)    ? if (User-Name =~ / /)  -> FALSE
(1)    ? if (User-Name =~ /@.*@/ )
(1)    ? if (User-Name =~ /@.*@/ )  -> FALSE
(1)    ? if (User-Name =~ /\\.\\./ )
(1)    ? if (User-Name =~ /\\.\\./ )  -> FALSE
(1)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(1)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(1)    ? if (User-Name =~ /\\.$/)
(1)    ? if (User-Name =~ /\\.$/)   -> FALSE
(1)    ? if (User-Name =~ /@\\./)
(1)    ? if (User-Name =~ /@\\./)   -> FALSE
(1)   } # filter_username filter_username = notfound
(1)   [preprocess] = ok
(1)   [chap] = noop
(1)   [mschap] = noop
(1)   [digest] = noop
(1) suffix : Looking up realm "local.com" for User-Name = "@local.com"
(1) suffix : No such realm "local.com"
(1)   [suffix] = noop
(1) eap : EAP packet type response id 1 length 6
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1)   [eap] = updated
(1)   [files] = noop
(1)   [expiration] = noop
(1)   [logintime] = noop
(1) WARNING: pap : No "known good" password found for the user.  Not setting Auth-Type
(1) WARNING: pap : Authentication will fail unless a "known good" password is available
(1)   [pap] = noop
(1)  } #  authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap : Expiring EAP session with state 0xfb6cee96fb6deabf
(1) eap : Finished EAP session with state 0xfb6cee96fb6deabf
(1) eap : Previous EAP request found for state 0xfb6cee96fb6deabf, released from the list
(1) eap : Peer sent NAK (3)
(1) eap : Found mutually acceptable type TTLS (21)
(1) eap : Calling eap_ttls to process EAP data
(1) eap_ttls : Flushing SSL sessions (of #0)
(1) eap_ttls : Initiate
(1) eap_ttls : Start returned 1
(1) eap : New EAP session, adding 'State' attribute to reply 0xfb6cee96fa6efbbf
(1)   [eap] = handled
(1)  } #  authenticate = handled
Sending Access-Challenge of id 1 from 127.0.0.1 port 1812 to 127.0.0.1 port 34960
        EAP-Message = 0x010200061520
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xfb6cee96fa6efbbfe758ceb5654c59b3
(1) Finished request 1.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 34960, id=2, length=243
        User-Name = '@local.com'
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = '02-00-00-00-00-01'
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = 'CONNECT 11Mbps 802.11b'
        EAP-Message = 0x0202007015001603010065010000610301528f7d625c4103fc18ddcb8c5f239d7e4e39601382be2a5fc963dd35b0e2384d00003a00390038008800870035008400160013000a00330032009a009900450044002f00960041000500040015001200090014001100080006000300ff0100
        State = 0xfb6cee96fa6efbbfe758ceb5654c59b3
        Message-Authenticator = 0x5d349f2c0841fe1a84a6e3cd8fdb7105
(2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(2)   authorize {
(2)   filter_username filter_username {
(2)    ? if (!User-Name)
(2)    ? if (!User-Name)  -> FALSE
(2)    ? if (User-Name != "%{tolower:%{User-Name}}")
(2)     expand: "%{tolower:%{User-Name}}" -> '@local.com'
(2)    ? if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(2)    ? if (User-Name =~ / /)
(2)    ? if (User-Name =~ / /)  -> FALSE
(2)    ? if (User-Name =~ /@.*@/ )
(2)    ? if (User-Name =~ /@.*@/ )  -> FALSE
(2)    ? if (User-Name =~ /\\.\\./ )
(2)    ? if (User-Name =~ /\\.\\./ )  -> FALSE
(2)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(2)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(2)    ? if (User-Name =~ /\\.$/)
(2)    ? if (User-Name =~ /\\.$/)   -> FALSE
(2)    ? if (User-Name =~ /@\\./)
(2)    ? if (User-Name =~ /@\\./)   -> FALSE
(2)   } # filter_username filter_username = notfound
(2)   [preprocess] = ok
(2)   [chap] = noop
(2)   [mschap] = noop
(2)   [digest] = noop
(2) suffix : Looking up realm "local.com" for User-Name = "@local.com"
(2) suffix : No such realm "local.com"
(2)   [suffix] = noop
(2) eap : EAP packet type response id 2 length 112
(2) eap : Continuing tunnel setup
(2)   [eap] = ok
(2)  } #  authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap : Expiring EAP session with state 0xfb6cee96fa6efbbf
(2) eap : Finished EAP session with state 0xfb6cee96fa6efbbf
(2) eap : Previous EAP request found for state 0xfb6cee96fa6efbbf, released from the list
(2) eap : Peer sent TTLS (21)
(2) eap : EAP TTLS (21)
(2) eap : Calling eap_ttls to process EAP data
(2) eap_ttls : Authenticate
(2) eap_ttls : processing EAP-TLS
(2) eap_ttls : eaptls_verify returned 7
(2) eap_ttls : Done initial handshake
(2) eap_ttls :     (other): before/accept initialization
(2) eap_ttls :     TLS_accept: before/accept initialization
(2) eap_ttls : <<< TLS 1.0 Handshake [length 0065], ClientHello
(2) eap_ttls :     TLS_accept: SSLv3 read client hello A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 0051], ServerHello
(2) eap_ttls :     TLS_accept: SSLv3 write server hello A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 08d0], Certificate
(2) eap_ttls :     TLS_accept: SSLv3 write certificate A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
(2) eap_ttls :     TLS_accept: SSLv3 write key exchange A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_ttls :     TLS_accept: SSLv3 write server done A
(2) eap_ttls :     TLS_accept: SSLv3 flush data
(2) eap_ttls :     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
(2) eap_ttls : eaptls_process returned 13
(2) eap : New EAP session, adding 'State' attribute to reply 0xfb6cee96f96ffbbf
(2)   [eap] = handled
(2)  } #  authenticate = handled
Sending Access-Challenge of id 2 from 127.0.0.1 port 1812 to 127.0.0.1 port 34960
        EAP-Message =
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xfb6cee96f96ffbbfe758ceb5654c59b3
(2) Finished request 2.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 34960, id=3, length=137
        User-Name = '@local.com'
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = '02-00-00-00-00-01'
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = 'CONNECT 11Mbps 802.11b'
        EAP-Message = 0x020300061500
        State = 0xfb6cee96f96ffbbfe758ceb5654c59b3
        Message-Authenticator = 0xc7fe9057d4aa56fab4eb4f40b5f95855
(3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(3)   authorize {
(3)   filter_username filter_username {
(3)    ? if (!User-Name)
(3)    ? if (!User-Name)  -> FALSE
(3)    ? if (User-Name != "%{tolower:%{User-Name}}")
(3)     expand: "%{tolower:%{User-Name}}" -> '@local.com'
(3)    ? if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(3)    ? if (User-Name =~ / /)
(3)    ? if (User-Name =~ / /)  -> FALSE
(3)    ? if (User-Name =~ /@.*@/ )
(3)    ? if (User-Name =~ /@.*@/ )  -> FALSE
(3)    ? if (User-Name =~ /\\.\\./ )
(3)    ? if (User-Name =~ /\\.\\./ )  -> FALSE
(3)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(3)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(3)    ? if (User-Name =~ /\\.$/)
(3)    ? if (User-Name =~ /\\.$/)   -> FALSE
(3)    ? if (User-Name =~ /@\\./)
(3)    ? if (User-Name =~ /@\\./)   -> FALSE
(3)   } # filter_username filter_username = notfound
(3)   [preprocess] = ok
(3)   [chap] = noop
(3)   [mschap] = noop
(3)   [digest] = noop
(3) suffix : Looking up realm "local.com" for User-Name = "@local.com"
(3) suffix : No such realm "local.com"
(3)   [suffix] = noop
(3) eap : EAP packet type response id 3 length 6
(3) eap : Continuing tunnel setup
(3)   [eap] = ok
(3)  } #  authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap : Expiring EAP session with state 0xfb6cee96f96ffbbf
(3) eap : Finished EAP session with state 0xfb6cee96f96ffbbf
(3) eap : Previous EAP request found for state 0xfb6cee96f96ffbbf, released from the list
(3) eap : Peer sent TTLS (21)
(3) eap : EAP TTLS (21)
(3) eap : Calling eap_ttls to process EAP data
(3) eap_ttls : Authenticate
(3) eap_ttls : processing EAP-TLS
(3) eap_ttls : Received TLS ACK
(3) eap_ttls : Received TLS ACK
(3) eap_ttls : ACK handshake fragment handler
(3) eap_ttls : eaptls_verify returned 1
(3) eap_ttls : eaptls_process returned 13
(3) eap : New EAP session, adding 'State' attribute to reply 0xfb6cee96f868fbbf
(3)   [eap] = handled
(3)  } #  authenticate = handled
Sending Access-Challenge of id 3 from 127.0.0.1 port 1812 to 127.0.0.1 port 34960
        EAP-Message =
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xfb6cee96f868fbbfe758ceb5654c59b3
(3) Finished request 3.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 34960, id=4, length=137
        User-Name = '@local.com'
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = '02-00-00-00-00-01'
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = 'CONNECT 11Mbps 802.11b'
        EAP-Message = 0x020400061500
        State = 0xfb6cee96f868fbbfe758ceb5654c59b3
        Message-Authenticator = 0x15ed08c0d3e70f9a3d554be9547dcfca
(4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(4)   authorize {
(4)   filter_username filter_username {
(4)    ? if (!User-Name)
(4)    ? if (!User-Name)  -> FALSE
(4)    ? if (User-Name != "%{tolower:%{User-Name}}")
(4)     expand: "%{tolower:%{User-Name}}" -> '@local.com'
(4)    ? if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(4)    ? if (User-Name =~ / /)
(4)    ? if (User-Name =~ / /)  -> FALSE
(4)    ? if (User-Name =~ /@.*@/ )
(4)    ? if (User-Name =~ /@.*@/ )  -> FALSE
(4)    ? if (User-Name =~ /\\.\\./ )
(4)    ? if (User-Name =~ /\\.\\./ )  -> FALSE
(4)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(4)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(4)    ? if (User-Name =~ /\\.$/)
(4)    ? if (User-Name =~ /\\.$/)   -> FALSE
(4)    ? if (User-Name =~ /@\\./)
(4)    ? if (User-Name =~ /@\\./)   -> FALSE
(4)   } # filter_username filter_username = notfound
(4)   [preprocess] = ok
(4)   [chap] = noop
(4)   [mschap] = noop
(4)   [digest] = noop
(4) suffix : Looking up realm "local.com" for User-Name = "@local.com"
(4) suffix : No such realm "local.com"
(4)   [suffix] = noop
(4) eap : EAP packet type response id 4 length 6
(4) eap : Continuing tunnel setup
(4)   [eap] = ok
(4)  } #  authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap : Expiring EAP session with state 0xfb6cee96f868fbbf
(4) eap : Finished EAP session with state 0xfb6cee96f868fbbf
(4) eap : Previous EAP request found for state 0xfb6cee96f868fbbf, released from the list
(4) eap : Peer sent TTLS (21)
(4) eap : EAP TTLS (21)
(4) eap : Calling eap_ttls to process EAP data
(4) eap_ttls : Authenticate
(4) eap_ttls : processing EAP-TLS
(4) eap_ttls : Received TLS ACK
(4) eap_ttls : Received TLS ACK
(4) eap_ttls : ACK handshake fragment handler
(4) eap_ttls : eaptls_verify returned 1
(4) eap_ttls : eaptls_process returned 13
(4) eap : New EAP session, adding 'State' attribute to reply 0xfb6cee96ff69fbbf
(4)   [eap] = handled
(4)  } #  authenticate = handled
Sending Access-Challenge of id 4 from 127.0.0.1 port 1812 to 127.0.0.1 port 34960
        EAP-Message =
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xfb6cee96ff69fbbfe758ceb5654c59b3
(4) Finished request 4.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 34960, id=5, length=335
        User-Name = '@local.com'
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = '02-00-00-00-00-01'
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = 'CONNECT 11Mbps 802.11b'
        EAP-Message = 0x020500cc150016030100861000008200808d7b46d11ae0f4e8450514228f17088263827a6eb96568e276517ad6c6696a8783f134f629716694d22cd12f704fbd76c83a2ab65ef6cd00fd06e508659fce1da72d8037543c99503644ba7c1063ce2f695a421cfd579ac015cf03d6d4ed53124062448ce65eab6065bcc2a8e19679812b16dc4d99824d8c73ebad2c259945ef14030100010116030100301315597eb7e87ef42fd5fe208d22c6337f36ca7d23f14e151a3e15a13a2e4e79945179bdf27bdf00b6dc1b7acd69285a
        State = 0xfb6cee96ff69fbbfe758ceb5654c59b3
        Message-Authenticator = 0xba48705a9fcf933e6c3d5da4f8d38826
(5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(5)   authorize {
(5)   filter_username filter_username {
(5)    ? if (!User-Name)
(5)    ? if (!User-Name)  -> FALSE
(5)    ? if (User-Name != "%{tolower:%{User-Name}}")
(5)     expand: "%{tolower:%{User-Name}}" -> '@local.com'
(5)    ? if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(5)    ? if (User-Name =~ / /)
(5)    ? if (User-Name =~ / /)  -> FALSE
(5)    ? if (User-Name =~ /@.*@/ )
(5)    ? if (User-Name =~ /@.*@/ )  -> FALSE
(5)    ? if (User-Name =~ /\\.\\./ )
(5)    ? if (User-Name =~ /\\.\\./ )  -> FALSE
(5)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(5)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(5)    ? if (User-Name =~ /\\.$/)
(5)    ? if (User-Name =~ /\\.$/)   -> FALSE
(5)    ? if (User-Name =~ /@\\./)
(5)    ? if (User-Name =~ /@\\./)   -> FALSE
(5)   } # filter_username filter_username = notfound
(5)   [preprocess] = ok
(5)   [chap] = noop
(5)   [mschap] = noop
(5)   [digest] = noop
(5) suffix : Looking up realm "local.com" for User-Name = "@local.com"
(5) suffix : No such realm "local.com"
(5)   [suffix] = noop
(5) eap : EAP packet type response id 5 length 204
(5) eap : Continuing tunnel setup
(5)   [eap] = ok
(5)  } #  authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap : Expiring EAP session with state 0xfb6cee96ff69fbbf
(5) eap : Finished EAP session with state 0xfb6cee96ff69fbbf
(5) eap : Previous EAP request found for state 0xfb6cee96ff69fbbf, released from the list
(5) eap : Peer sent TTLS (21)
(5) eap : EAP TTLS (21)
(5) eap : Calling eap_ttls to process EAP data
(5) eap_ttls : Authenticate
(5) eap_ttls : processing EAP-TLS
(5) eap_ttls : eaptls_verify returned 7
(5) eap_ttls : Done initial handshake
(5) eap_ttls : <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
(5) eap_ttls :     TLS_accept: SSLv3 read client key exchange A
(5) eap_ttls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls : <<< TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls :     TLS_accept: SSLv3 read finished A
(5) eap_ttls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls :     TLS_accept: SSLv3 write change cipher spec A
(5) eap_ttls : >>> TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls :     TLS_accept: SSLv3 write finished A
(5) eap_ttls :     TLS_accept: SSLv3 flush data
  SSL: adding session 1791efc62a658dba0e11086b0749168e97c29f02bc30edff9ca87309a906cb1d to cache
(5) eap_ttls :     (other): SSL negotiation finished successfully
SSL Connection Established
(5) eap_ttls : eaptls_process returned 13
(5) eap : New EAP session, adding 'State' attribute to reply 0xfb6cee96fe6afbbf
(5)   [eap] = handled
(5)  } #  authenticate = handled
Sending Access-Challenge of id 5 from 127.0.0.1 port 1812 to 127.0.0.1 port 34960
        EAP-Message = 0x0106004515800000003b1403010001011603010030a05734192e79810a8d64d1a9a7e7789e702ff989baf7a57b968401eacfdc6c86bdf4be2dfdaa03d01b77c065a677fb97
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xfb6cee96fe6afbbfe758ceb5654c59b3
(5) Finished request 5.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 34960, id=6, length=259
        User-Name = '@local.com'
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = '02-00-00-00-00-01'
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = 'CONNECT 11Mbps 802.11b'
        EAP-Message = 0x0206008015001703010020031c24c5ebf62f75a2c4aa02d6bcc9aef20e66c76d92730bcb397f0ce59a8acc17030100504ecedee67f27e4ed359a2efc2793eaca2f1d9efc7107e29f6ae7d215d62df3945d978bcff12b58e2f8ffed10fba0abeea0fa1e5bb19d5e1bfd296596e83ecaf8b64afd3922e32487a944393e9eacb86f
        State = 0xfb6cee96fe6afbbfe758ceb5654c59b3
        Message-Authenticator = 0x51271701cf938399cc423611b0dc48eb
(6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(6)   authorize {
(6)   filter_username filter_username {
(6)    ? if (!User-Name)
(6)    ? if (!User-Name)  -> FALSE
(6)    ? if (User-Name != "%{tolower:%{User-Name}}")
(6)     expand: "%{tolower:%{User-Name}}" -> '@local.com'
(6)    ? if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(6)    ? if (User-Name =~ / /)
(6)    ? if (User-Name =~ / /)  -> FALSE
(6)    ? if (User-Name =~ /@.*@/ )
(6)    ? if (User-Name =~ /@.*@/ )  -> FALSE
(6)    ? if (User-Name =~ /\\.\\./ )
(6)    ? if (User-Name =~ /\\.\\./ )  -> FALSE
(6)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(6)    ? if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(6)    ? if (User-Name =~ /\\.$/)
(6)    ? if (User-Name =~ /\\.$/)   -> FALSE
(6)    ? if (User-Name =~ /@\\./)
(6)    ? if (User-Name =~ /@\\./)   -> FALSE
(6)   } # filter_username filter_username = notfound
(6)   [preprocess] = ok
(6)   [chap] = noop
(6)   [mschap] = noop
(6)   [digest] = noop
(6) suffix : Looking up realm "local.com" for User-Name = "@local.com"
(6) suffix : No such realm "local.com"
(6)   [suffix] = noop
(6) eap : EAP packet type response id 6 length 128
(6) eap : Continuing tunnel setup
(6)   [eap] = ok
(6)  } #  authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap : Expiring EAP session with state 0xfb6cee96fe6afbbf
(6) eap : Finished EAP session with state 0xfb6cee96fe6afbbf
(6) eap : Previous EAP request found for state 0xfb6cee96fe6afbbf, released from the list
(6) eap : Peer sent TTLS (21)
(6) eap : EAP TTLS (21)
(6) eap : Calling eap_ttls to process EAP data
(6) eap_ttls : Authenticate
(6) eap_ttls : processing EAP-TLS
(6) eap_ttls : eaptls_verify returned 7
(6) eap_ttls : Done initial handshake
(6) eap_ttls : eaptls_process returned 7
(6) eap_ttls : Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls : Got tunneled request
        User-Name = 'steve@local.com'
        User-Password = 'testing'
(6) eap_ttls : Sending tunneled request
        User-Name = 'steve@local.com'
        User-Password = 'testing'
server inner-tunnel {
(6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
(6)   authorize {
(6)   [chap] = noop
(6)   [mschap] = noop
(6) suffix : Looking up realm "local.com" for User-Name = "steve@local.com"
(6) suffix : No such realm "local.com"
(6)   [suffix] = noop
(6)   update control {
(6)             Proxy-To-Realm := 'LOCAL'
(6)   } # update control = noop
(6) eap : No EAP-Message, not doing EAP
(6)   [eap] = noop
(6) files : users: Matched entry steve@local.com at line 74
(6)   [files] = ok
(6)   [expiration] = noop
(6)   [logintime] = noop
(6)   [pap] = updated
(6)  } #  authorize = updated
(6) Found Auth-Type = PAP
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
(6)  Auth-Type PAP {
(6) pap : login attempt with password "testing"
(6) pap : Using clear text password "testing"
(6) pap : User authenticated successfully
(6)   [pap] = ok
(6)  } # Auth-Type PAP = ok
(6) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
(6)   post-auth {
(6)   update outer.reply {
(6) eap_ttls :  expand: "%{request:User-Name}" -> '@local.com'
(6) eap_ttls :          User-Name = "@local.com"
(6)   } # update outer.reply = noop
(6)  } #  post-auth = noop
} # server inner-tunnel
(6) eap_ttls : Got tunneled reply code 2
(6) eap_ttls : Got tunneled Access-Accept
(6) eap_ttls : Saving session 1791efc62a658dba0e11086b0749168e97c29f02bc30edff9ca87309a906cb1d vps 0x1e1a890 in the cache
(6) eap : Freeing handler
(6)   [eap] = ok
(6)  } #  authenticate = ok
(6) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
(6)   post-auth {
(6)   [exec] = noop
(6)   remove_reply_message_if_eap remove_reply_message_if_eap {
(6)    ? if (reply:EAP-Message && reply:Reply-Message)
(6)    ? if (reply:EAP-Message && reply:Reply-Message)  -> FALSE
(6)    else else {
(6)     [noop] = noop
(6)    } # else else = noop
(6)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(6)  } #  post-auth = noop
Sending Access-Accept of id 6 from 127.0.0.1 port 1812 to 127.0.0.1 port 34960
        User-Name = '@local.com'
        MS-MPPE-Recv-Key = 0x82c050d1536fe8761e42da5328f916be2d04b5ab269e40cf6348e130bd293b99
        MS-MPPE-Send-Key = 0xc25dfbe86c7a41c5b8c3efbbb20d439090e5a0da6b4a7aa4501c8c5c510e2eb1
        EAP-Message = 0x03060004
        Message-Authenticator = 0x00000000000000000000000000000000
(6) Finished request 6.
Waking up in 0.3 seconds.
Waking up in 4.6 seconds.
(0) Cleaning up request packet ID 0 with timestamp +3
(1) Cleaning up request packet ID 1 with timestamp +3
(2) Cleaning up request packet ID 2 with timestamp +3
(3) Cleaning up request packet ID 3 with timestamp +3
(4) Cleaning up request packet ID 4 with timestamp +3
(5) Cleaning up request packet ID 5 with timestamp +3
(6) Cleaning up request packet ID 6 with timestamp +3
Ready to process requests

Janet(UK) is a trading name of Jisc Collections and Janet Limited, a 
not-for-profit company which is registered in England under No. 2881024 
and whose Registered Office is at Lumen House, Library Avenue,
Harwell Oxford, Didcot, Oxfordshire. OX11 0SG. VAT No. 614944238