Hi everyone, I managed to install Freeradius with OpenSSL under Debian Lenny and it did work like a charm for a while. However, after I did the same process of installation in another virtualbox machine, it has not worked anymore. The console log report the following error: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. The complete log is: xmobileb155ce:~# freeradius -X FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Mar 18 2010 at 04:07:54 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/001mschap-default including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/001ntlm_auth-default including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/innet-tunnel-default including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/default-default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client WiFi Network/24 { require_message_authenticator = no secret = "alejandro" shortname = "N1P2" } client AP's IP_ADD { require_message_authenticator = no secret = "alejandro" shortname = "mw-ltqFreeradius-N1-P2-01" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MI_DOMINIO} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/privkey.pem" certificate_file = "/etc/freeradius/certs/cert.pem" CA_file = "/etc/freeradius/certs/cacert.pem" private_key_password = "alejandro" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MI_DOMINIO} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" input_pairs = "request" shell_escape = yes } Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=0, length=211 Message-Authenticator = 0x93930a64fe55679bbf166346dd01c8ee Service-Type = Framed-User User-Name = "MI_DOMINIO\\ORTEGACA" Framed-MTU = 1488 Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg" Calling-Station-Id = "00-1F-3C-2D-62-C1" NAS-Identifier = "WAP55AG" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x02000017015044565341323030305c4f52544547414341 NAS-IP-Address = AP's IP_ADD NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 23 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to AP's IP_ADD port 1044 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3f0f6ba03f0e72e0b3955098d1e297ca Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=1, length=286 Message-Authenticator = 0xe90497c13c690e16d5485c28de3e9496 Service-Type = Framed-User User-Name = "MI_DOMINIO\\ORTEGACA" Framed-MTU = 1488 State = 0x3f0f6ba03f0e72e0b3955098d1e297ca Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg" Calling-Station-Id = "00-1F-3C-2D-62-C1" NAS-Identifier = "WAP55AG" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0201005019800000004616030100410100003d03014c2df82b1aaab762c4848152fd27fc2bf58bd616a171819685cdabc06742c01900001600040005000a000900640062000300060013001200630100 NAS-IP-Address = AP's IP_ADD NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 70 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0041], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 06da], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 1 to AP's IP_ADD port 1044 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x312e70647673612e636f6d31 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3f0f6ba03e0d72e0b3955098d1e297ca Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=2, length=212 Message-Authenticator = 0xf5bf8d910858176aa660a0b84bb59a47 Service-Type = Framed-User User-Name = "MI_DOMINIO\\ORTEGACA" Framed-MTU = 1488 State = 0x3f0f6ba03e0d72e0b3955098d1e297ca Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg" Calling-Station-Id = "00-1F-3C-2D-62-C1" NAS-Identifier = "WAP55AG" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020200061900 NAS-IP-Address = AP's IP_ADD NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to AP's IP_ADD port 1044 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xe0f8ab382e453520b31f1571471622b3b167ad75a49437a3155d091693e09f027deedc3d875a9d16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3f0f6ba03d0c72e0b3955098d1e297ca Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=3, length=212 Message-Authenticator = 0x816e317a044a6cc3f91a7f579f6126d5 Service-Type = Framed-User User-Name = "MI_DOMINIO\\ORTEGACA" Framed-MTU = 1488 State = 0x3f0f6ba03d0c72e0b3955098d1e297ca Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg" Calling-Station-Id = "00-1F-3C-2D-62-C1" NAS-Identifier = "WAP55AG" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300061900 NAS-IP-Address = AP's IP_ADD NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to AP's IP_ADD port 1044 EAP-Message = 0x010400061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3f0f6ba03c0b72e0b3955098d1e297ca Finished request 3. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 0 with timestamp +0 Cleaning up request 1 ID 1 with timestamp +0 Cleaning up request 2 ID 2 with timestamp +0 Cleaning up request 3 ID 3 with timestamp +0 Ready to process requests. ^C xmobileb155ce:~# Some help is appreciate. Regards, Cesar Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it! _________________________________________________________________ Explore the seven wonders of the world http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE