Freeradius 2.1.8+Windows AD+MS-CHAP with ntlm_auth ( [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this)

2 Jul 2010

      Hi everyone,

I managed to install Freeradius with OpenSSL under Debian Lenny and it did work like a charm for a while. However, after I did the same process of installation in another virtualbox machine, it has not worked anymore. The console log report the following error:

[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.

The complete log is:

xmobileb155ce:~# freeradius -X
FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Mar 18 2010 at 04:07:54
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. 
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
You may redistribute copies of FreeRADIUS under the terms of the 
GNU General Public License v2. 
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/001mschap-default
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/001ntlm_auth-default
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/innet-tunnel-default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/default-default
main {
    user = "freerad"
    group = "freerad"
    allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
    prefix = "/usr"
    localstatedir = "/var"
    logdir = "/var/log/freeradius"
    libdir = "/usr/lib/freeradius"
    radacctdir = "/var/log/freeradius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 1024
    pidfile = "/var/run/freeradius/freeradius.pid"
    checkrad = "/usr/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
 log {
    stripped_names = no
    auth = no
    auth_badpass = no
    auth_goodpass = no
 }
 security {
    max_attributes = 200
    reject_delay = 1
    status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
    retry_delay = 5
    retry_count = 3
    default_fallback = no
    dead_time = 120
    wake_all_if_all_dead = no
 }
 home_server localhost {
    ipaddr = 127.0.0.1
    port = 1812
    type = "auth"
    secret = "testing123"
    response_window = 20
    max_outstanding = 65536
    require_message_authenticator = no
    zombie_period = 40
    status_check = "status-server"
    ping_interval = 30
    check_interval = 30
    num_answers_to_alive = 3
    num_pings_to_alive = 3
    revive_interval = 120
    status_check_timeout = 4
    irt = 2
    mrt = 16
    mrc = 5
    mrd = 30
 }
 home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
 }
 realm example.com {
    auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
    ipaddr = 127.0.0.1
    require_message_authenticator = no
    secret = "testing123"
    nastype = "other"
 }
 client WiFi Network/24 {
    require_message_authenticator = no
    secret = "alejandro"
    shortname = "N1P2"
 }
 client AP's IP_ADD {
    require_message_authenticator = no
    secret = "alejandro"
    shortname = "mw-ltqFreeradius-N1-P2-01"
    nastype = "other"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
    wait = no
    input_pairs = "request"
    shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
    reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
    reply-message = "You are calling outside your allowed timespan  "
    minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
    encryption_scheme = "auto"
    auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
    use_mppe = yes
    require_encryption = no
    require_strong = no
    with_ntdomain_hack = yes
    ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MI_DOMINIO} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
    radwtmp = "/var/log/freeradius/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
    default_eap_type = "peap"
    timer_expire = 60
    ignore_unknown_eap_types = no
    cisco_accounting_username_bug = no
    max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    pem_file_type = yes
    private_key_file = "/etc/freeradius/certs/privkey.pem"
    certificate_file = "/etc/freeradius/certs/cert.pem"
    CA_file = "/etc/freeradius/certs/cacert.pem"
    private_key_password = "alejandro"
    dh_file = "/etc/freeradius/certs/dh"
    random_file = "/dev/urandom"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    make_cert_command = "/etc/freeradius/certs/bootstrap"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
    with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
    format = "suffix"
    delimiter = "@"
    ignore_default = no
    ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
    usersfile = "/etc/freeradius/users"
    acctusersfile = "/etc/freeradius/acct_users"
    preproxy_usersfile = "/etc/freeradius/preproxy_users"
    compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
    filename = "/var/log/freeradius/radutmp"
    username = "%{User-Name}"
    case_sensitive = yes
    check_with_nas = yes
    perm = 384
    callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
    attrsfile = "/etc/freeradius/attrs.access_reject"
    key = "%{User-Name}"
  }
 } # modules
} # server
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Instantiating ntlm_auth
  exec ntlm_auth {
    wait = yes
    program = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MI_DOMINIO} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
    input_pairs = "request"
    shell_escape = yes
  }
 Module: Checking authorize {...} for more modules to load
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
    huntgroups = "/etc/freeradius/huntgroups"
    hints = "/etc/freeradius/hints"
    with_ascend_hack = no
    ascend_channels_per_line = 23
    with_ntdomain_hack = no
    with_specialix_jetstream_hack = no
    with_cisco_vsa_hack = no
    with_alvarion_vsa_hack = no
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating acct_unique
  acct_unique {
    key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating detail
  detail {
    detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
    header = "%t"
    detailperm = 384
    dirperm = 493
    locking = no
    log_packet_header = no
  }
 Module: Instantiating attr_filter.accounting_response
  attr_filter attr_filter.accounting_response {
    attrsfile = "/etc/freeradius/attrs.accounting_response"
    key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
    type = "auth"
    ipaddr = *
    port = 0
}
listen {
    type = "acct"
    ipaddr = *
    port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=0, length=211
    Message-Authenticator = 0x93930a64fe55679bbf166346dd01c8ee
    Service-Type = Framed-User
    User-Name = "MI_DOMINIO\\ORTEGACA"
    Framed-MTU = 1488
    Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
    Calling-Station-Id = "00-1F-3C-2D-62-C1"
    NAS-Identifier = "WAP55AG"
    NAS-Port-Type = Wireless-802.11
    Connect-Info = "CONNECT 54Mbps 802.11g"
    EAP-Message = 0x02000017015044565341323030305c4f52544547414341
    NAS-IP-Address = AP's IP_ADD
    NAS-Port = 1
    NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 23
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to AP's IP_ADD port 1044
    EAP-Message = 0x010100061920
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0x3f0f6ba03f0e72e0b3955098d1e297ca
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=1, length=286
    Message-Authenticator = 0xe90497c13c690e16d5485c28de3e9496
    Service-Type = Framed-User
    User-Name = "MI_DOMINIO\\ORTEGACA"
    Framed-MTU = 1488
    State = 0x3f0f6ba03f0e72e0b3955098d1e297ca
    Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
    Calling-Station-Id = "00-1F-3C-2D-62-C1"
    NAS-Identifier = "WAP55AG"
    NAS-Port-Type = Wireless-802.11
    Connect-Info = "CONNECT 54Mbps 802.11g"
    EAP-Message = 0x0201005019800000004616030100410100003d03014c2df82b1aaab762c4848152fd27fc2bf58bd616a171819685cdabc06742c01900001600040005000a000900640062000300060013001200630100
    NAS-IP-Address = AP's IP_ADD
    NAS-Port = 1
    NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 70
[peap] Length Included
[peap] eaptls_verify returned 11 
[peap]     (other): before/accept initialization 
[peap]     TLS_accept: before/accept initialization 
[peap] <<< TLS 1.0 Handshake [length 0041], ClientHello  
[peap]     TLS_accept: SSLv3 read client hello A 
[peap] >>> TLS 1.0 Handshake [length 002a], ServerHello  
[peap]     TLS_accept: SSLv3 write server hello A 
[peap] >>> TLS 1.0 Handshake [length 06da], Certificate  
[peap]     TLS_accept: SSLv3 write certificate A 
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
[peap]     TLS_accept: SSLv3 write server done A 
[peap]     TLS_accept: SSLv3 flush data 
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase 
In SSL Accept mode  
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 1 to AP's IP_ADD port 1044
    EAP-Message = 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
    EAP-Message = 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
    EAP-Message = 0xe32a821e8de6d8d6b93c4a2f56ebdb794505c286e8cf90afd49fa4ed7f2884c71c05fa433c8bc1eeb82047282ee632a335704d981f9abbd72db1e9c2651a41f7bb617b431b96e625160d5a7b250203010001a37b307930090603551d1304023000302c06096086480186f842010d041f161d4f70656e53534c2047656e657261746564204365727469666963617465301d0603551d0e04160414f5e48dd3f3f7c9d2f8d1d238d806dc2d373b3f75301f0603551d230418301680148f5fef5cc045862dacaacab2743ac1b5e6004da4300d06092a864886f70d010104050003818100793f45a2857d4dd39a792ae4c3be4af073f884512cbc4df80e8ad6
    EAP-Message = 0x9c1ab61196c6eb92f4ee31ddd0d2159085f44a602649ab1e8e99ada8964486e988554386b0a6447678b49ff53ddb06b964f737560fa2731cdb362a75d0894bd7c7f7d980b3100785eb9443172b2bb03fb26ca801099053e7c9e991a8de7447789db233077c0003b9308203b53082031ea003020102020900e41bd88320212e1b300d06092a864886f70d0101050500308199310b30090603550406130256453110300e060355040813074d6972616e6461311330110603550407130a4c6f73205465717565733110300e060355040a1307496e7465766570310c300a060355040b13034149543120301e06035504031317786d6f62696c656662663434
    EAP-Message = 0x312e70647673612e636f6d31
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0x3f0f6ba03e0d72e0b3955098d1e297ca
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=2, length=212
    Message-Authenticator = 0xf5bf8d910858176aa660a0b84bb59a47
    Service-Type = Framed-User
    User-Name = "MI_DOMINIO\\ORTEGACA"
    Framed-MTU = 1488
    State = 0x3f0f6ba03e0d72e0b3955098d1e297ca
    Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
    Calling-Station-Id = "00-1F-3C-2D-62-C1"
    NAS-Identifier = "WAP55AG"
    NAS-Port-Type = Wireless-802.11
    Connect-Info = "CONNECT 54Mbps 802.11g"
    EAP-Message = 0x020200061900
    NAS-IP-Address = AP's IP_ADD
    NAS-Port = 1
    NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1 
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 2 to AP's IP_ADD port 1044
    EAP-Message = 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
    EAP-Message = 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
    EAP-Message = 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
    EAP-Message = 0xe0f8ab382e453520b31f1571471622b3b167ad75a49437a3155d091693e09f027deedc3d875a9d16030100040e000000
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0x3f0f6ba03d0c72e0b3955098d1e297ca
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=3, length=212
    Message-Authenticator = 0x816e317a044a6cc3f91a7f579f6126d5
    Service-Type = Framed-User
    User-Name = "MI_DOMINIO\\ORTEGACA"
    Framed-MTU = 1488
    State = 0x3f0f6ba03d0c72e0b3955098d1e297ca
    Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
    Calling-Station-Id = "00-1F-3C-2D-62-C1"
    NAS-Identifier = "WAP55AG"
    NAS-Port-Type = Wireless-802.11
    Connect-Info = "CONNECT 54Mbps 802.11g"
    EAP-Message = 0x020300061900
    NAS-IP-Address = AP's IP_ADD
    NAS-Port = 1
    NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1 
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 3 to AP's IP_ADD port 1044
    EAP-Message = 0x010400061900
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0x3f0f6ba03c0b72e0b3955098d1e297ca
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 0 with timestamp +0
Cleaning up request 1 ID 1 with timestamp +0
Cleaning up request 2 ID 2 with timestamp +0
Cleaning up request 3 ID 3 with timestamp +0
Ready to process requests.
^C
xmobileb155ce:~# 

Some help is appreciate.

Regards,

Cesar

Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it! 		 	   		  
_________________________________________________________________
Explore the seven wonders of the world
http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE

Freeradius 2.1.8+Windows AD+MS-CHAP with ntlm_auth ( [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this)

Cesar Ortega