FreeRADIUS didn't send Tunnel type and Id in Access-Accept while using EAP-TTLS authentication
Phani Siriki
yvsg.phanis at gmail.com
Wed Aug 29 18:37:27 CEST 2018
Hi Team
When I tried to use EAP-TTLS with md5 phase authentication, freeRADIUS
is not sending Tunnel type and Id information to authenticator.
Did anyone notice this problem before?
Supplicant:
========
sudo wpa_supplicant -c /var/run/wpa_supplicant -D wired -i et26
Successfully initialized wpa_supplicant
et26: Associated with 01:80:c2:00:00:03
et26: CTRL-EVENT-EAP-STARTED EAP authentication started
et26: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=4 -> NAK
et26: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
OpenSSL: tls_connection_ca_cert - Failed to load root certificates
error:00000000:lib(0):func(0):reason(0)
et26: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
et26: CTRL-EVENT-EAP-PEER-CERT depth=1
subject='/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=admin at example.org/CN=Example Certificate Authority'
et26: CTRL-EVENT-EAP-PEER-CERT depth=0
subject='/C=FR/ST=Radius/O=Example Inc./CN=Example Server
Certificate/emailAddress=admin at example.org'
et26: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
et26: CTRL-EVENT-CONNECTED - Connection to 01:80:c2:00:00:03 completed
[id=0 id_str=]
^Cet26: CTRL-EVENT-DISCONNECTED bssid=01:80:c2:00:00:03 reason=3
locally_generated=1
et26: CTRL-EVENT-TERMINATING
Snippet of virtual server and Access-Accept message:
==========================================
(7) Virtual server sending reply
(7) Tunnel-Medium-Type:0 = IEEE-802
(7) Tunnel-Type:0 = VLAN
(7) Tunnel-Private-Group-Id:0 = "101"
(7) EAP-Message = 0x03010004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) User-Name = "user"
(7) eap_ttls: Got tunneled Access-Accept
(7) Sent Access-Accept Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(7) MS-MPPE-Recv-Key =
0x7f6794c1502ca356eef3509dc34b924f6467cd01e68d2cee4893f0da254fe042
(7) MS-MPPE-Send-Key =
0x168decef518d2d20c147d522f2ede40adf2bf12bd6c6c747845fce108d0e4702
(7) EAP-Message = 0x03080004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) User-Name = "user"
(7) Finished request
Full Radius Server logs:
===============
[root at freeradius-yagna ~]# radiusd -X
FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client 0.0.0.0/0 {
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
0.0.0.0/0. Please fix your configuration
Support for old-style clients will be removed in a future release
client ::/0 {
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0.
Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
/etc/raddb/sites-enabled/default[540]: Duplicate Auth-Type 'eap'
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_dhcp
# Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
instantiate {
}
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
ca_file = "/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:330
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 48325
Listening on proxy address :: port 43031
Ready to process requests
(0) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 125
(0) User-Name = "user"
(0) NAS-Port-Id = "Ethernet26"
(0) NAS-Port-Type = Ethernet
(0) Calling-Station-Id = "A:A:A:1b:20:d5"
(0) Called-Station-Id = "A:A:A:01:c8:28"
(0) Framed-MTU = 9214
(0) NAS-IP-Address = 172.24.85.245
(0) EAP-Message = 0x020100090175736572
(0) Message-Authenticator = 0xf5c4568c50791ea8f5c9f12a86ec4677
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "user", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 9
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0xc68a57f2c688535e
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(0) EAP-Message = 0x01020016041052fed3fc7ebfa2d4ec58c51045e18e73
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xc68a57f2c688535e5ac878decd35ea4b
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 0 with timestamp +8
(1) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 140
(1) User-Name = "user"
(1) NAS-Port-Id = "Ethernet26"
(1) NAS-Port-Type = Ethernet
(1) Calling-Station-Id = "A:A:A:1b:20:d5"
(1) Called-Station-Id = "A:AA:01:c8:28"
(1) Framed-MTU = 9214
(1) NAS-IP-Address = 172.24.85.245
(1) EAP-Message = 0x020200060315
(1) State = 0xc68a57f2c688535e5ac878decd35ea4b
(1) Message-Authenticator = 0x67aeee2b4b10eaa00a227c463f067e84
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "user", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) files: users: Matched entry user at line 30
(1) [files] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: Auth-Type already set. Not setting to PAP
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0xc68a57f2c688535e
(1) eap: Finished EAP session with state 0xc68a57f2c688535e
(1) eap: Previous EAP request found for state 0xc68a57f2c688535e,
released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Initiating new EAP-TLS session
(1) eap_ttls: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0xc68a57f2c789425e
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(1) Tunnel-Medium-Type:0 = IEEE-802
(1) Tunnel-Type:0 = VLAN
(1) Tunnel-Private-Group-Id:0 = "101"
(1) EAP-Message = 0x010300061520
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xc68a57f2c789425e5ac878decd35ea4b
(1) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 0 with timestamp +8
(2) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 317
(2) User-Name = "user"
(2) NAS-Port-Id = "Ethernet26"
(2) NAS-Port-Type = Ethernet
(2) Calling-Station-Id = "A:A:A:1b:20:d5"
(2) Called-Station-Id = "A:A:A:01:c8:28"
(2) Framed-MTU = 9214
(2) NAS-IP-Address = 172.24.85.245
(2) EAP-Message =
0x020300b7150016030100ac010000a80301813004343d337f46a4d0d2817ef3b8ecb8bdd80df6980edeca97e57c46f48fbb000064c014c00a00390038003700360088008700860085c00fc00500350084c013c0090033003200310030009a0099009800970045004400430042c00ec004002f00960041c0
(2) State = 0xc68a57f2c789425e5ac878decd35ea4b
(2) Message-Authenticator = 0x38b30904426fed5f28b7df7fd018edc4
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "user", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 183
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0xc68a57f2c789425e
(2) eap: Finished EAP session with state 0xc68a57f2c789425e
(2) eap: Previous EAP request found for state 0xc68a57f2c789425e,
released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: [eaptls verify] = ok
(2) eap_ttls: Done initial handshake
(2) eap_ttls: (other): before/accept initialization
(2) eap_ttls: TLS_accept: before/accept initialization
(2) eap_ttls: <<< recv TLS 1.0 Handshake [length 00ac], ClientHello
(2) eap_ttls: TLS_accept: SSLv3 read client hello A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 003e], ServerHello
(2) eap_ttls: TLS_accept: SSLv3 write server hello A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 08d3], Certificate
(2) eap_ttls: TLS_accept: SSLv3 write certificate A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_ttls: TLS_accept: SSLv3 write key exchange A
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_ttls: TLS_accept: SSLv3 write server done A
(2) eap_ttls: TLS_accept: SSLv3 flush data
(2) eap_ttls: TLS_accept: SSLv3 read client certificate A
(2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client
key exchange A
(2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client
key exchange A
(2) eap_ttls: In SSL Handshake Phase
(2) eap_ttls: In SSL Accept mode
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0xc68a57f2c48e425e
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(2) EAP-Message =
0x010403ec15c000000a74160301003e0200003a0301f7104bd99b35aa476ff63697f9174fe07bb080662524f4e2958ab4f187038c6d00c014000012ff01000100000b000403000102000f00010116030108d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xc68a57f2c48e425e5ac878decd35ea4b
(2) Finished request
Waking up in 4.9 seconds.
(2) Cleaning up request packet ID 0 with timestamp +8
(3) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 140
(3) User-Name = "user"
(3) NAS-Port-Id = "Ethernet26"
(3) NAS-Port-Type = Ethernet
(3) Calling-Station-Id = "A:A:A:1b:20:d5"
(3) Called-Station-Id = "A:A:A:01:c8:28"
(3) Framed-MTU = 9214
(3) NAS-IP-Address = 172.24.85.245
(3) EAP-Message = 0x020400061500
(3) State = 0xc68a57f2c48e425e5ac878decd35ea4b
(3) Message-Authenticator = 0x187c12fd236634d75d87b153ad931964
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "user", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0xc68a57f2c48e425e
(3) eap: Finished EAP session with state 0xc68a57f2c48e425e
(3) eap: Previous EAP request found for state 0xc68a57f2c48e425e,
released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 1004
(3) eap: EAP session adding &reply:State = 0xc68a57f2c58f425e
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(3) EAP-Message =
0x010503ec15c000000a74f3925dbc68cc68be8006d56bcea251c6dbcdda6bb0c009ab13c2082612d5f8d66dc42b1c3139a7293f1d32e60c91329931f208b0d7996c4ba92b4cb9376320a679f5d38c10201a07afd44c44efcf0004e8308204e4308203cca003020102020900df9121b99f0c6297300d0609
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xc68a57f2c58f425e5ac878decd35ea4b
(3) Finished request
Waking up in 4.9 seconds.
(3) Cleaning up request packet ID 0 with timestamp +8
(4) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 140
(4) User-Name = "user"
(4) NAS-Port-Id = "Ethernet26"
(4) NAS-Port-Type = Ethernet
(4) Calling-Station-Id = "A:A:A:1b:20:d5"
(4) Called-Station-Id = "A:A:A:01:c8:28"
(4) Framed-MTU = 9214
(4) NAS-IP-Address = 172.24.85.245
(4) EAP-Message = 0x020500061500
(4) State = 0xc68a57f2c58f425e5ac878decd35ea4b
(4) Message-Authenticator = 0xf2aba384519a2b8116794ac9e3c196e3
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "user", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0xc68a57f2c58f425e
(4) eap: Finished EAP session with state 0xc68a57f2c58f425e
(4) eap: Previous EAP request found for state 0xc68a57f2c58f425e,
released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer ACKed our handshake fragment
(4) eap_ttls: [eaptls verify] = request
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 698
(4) eap: EAP session adding &reply:State = 0xc68a57f2c28c425e
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(4) EAP-Message =
0x010602ba158000000a74130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100131af9eaa59dc1070b604ff0253094972ee5c947141f
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xc68a57f2c28c425e5ac878decd35ea4b
(4) Finished request
Waking up in 4.9 seconds.
(4) Cleaning up request packet ID 0 with timestamp +8
(5) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 274
(5) User-Name = "user"
(5) NAS-Port-Id = "Ethernet26"
(5) NAS-Port-Type = Ethernet
(5) Calling-Station-Id = "A:A:A:1b:20:d5"
(5) Called-Station-Id = "A:A:A:01:c8:28"
(5) Framed-MTU = 9214
(5) NAS-IP-Address = 172.24.85.245
(5) EAP-Message =
0x0206008c15001603010046100000424104679b2ae43fb50d0b49b40e4ed4e8de009085c7b27d63deee0cdc41ecda3cf18c4b9bb3fd9c9526a37a26cc4c638edef2c19839db81c0a628cdf2dff8360f9ba5140301000101160301003012b315da2cd22369ef0ca9ee72097fcdb36651cd14717f60281d3a
(5) State = 0xc68a57f2c28c425e5ac878decd35ea4b
(5) Message-Authenticator = 0xd99b49149e20ad4fb685042749a13c93
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "user", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 140
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0xc68a57f2c28c425e
(5) eap: Finished EAP session with state 0xc68a57f2c28c425e
(5) eap: Previous EAP request found for state 0xc68a57f2c28c425e,
released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: [eaptls verify] = ok
(5) eap_ttls: Done initial handshake
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(5) eap_ttls: TLS_accept: SSLv3 read certificate verify A
(5) eap_ttls: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls: TLS_accept: SSLv3 read finished A
(5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls: TLS_accept: SSLv3 write finished A
(5) eap_ttls: TLS_accept: SSLv3 flush data
(5) eap_ttls: (other): SSL negotiation finished successfully
(5) eap_ttls: SSL Connection Established
(5) eap_ttls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 7 length 69
(5) eap: EAP session adding &reply:State = 0xc68a57f2c38d425e
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(5) EAP-Message =
0x0107004515800000003b14030100010116030100308f33b781dac287145557273c5fa81093a87c6beca3c9969cf2ba2c0a74c33c3bc96f65692d8a6899419e3c3f39b30d24
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xc68a57f2c38d425e5ac878decd35ea4b
(5) Finished request
Waking up in 4.9 seconds.
(5) Cleaning up request packet ID 0 with timestamp +8
(6) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 230
(6) User-Name = "user"
(6) NAS-Port-Id = "Ethernet26"
(6) NAS-Port-Type = Ethernet
(6) Calling-Station-Id = "A:1b:20:d5"
(6) Called-Station-Id = "A:01:c8:28"
(6) Framed-MTU = 9214
(6) NAS-IP-Address = 172.24.85.245
(6) EAP-Message =
0x0207006015001703010020b13ce64274e77ee82bdc9872c34983f76a5e9478587af393f895eebd880575b41703010030cfc55af5a50800b4f6d3bb54d66488568602e3ff7edc4ca128a24a6bd75a16646a8195b30ea841f9d2de586ff320c187
(6) State = 0xc68a57f2c38d425e5ac878decd35ea4b
(6) Message-Authenticator = 0xb631d30eda26119f7cf7ecf94eb57a4b
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "user", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 96
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0xc68a57f2c38d425e
(6) eap: Finished EAP session with state 0xc68a57f2c38d425e
(6) eap: Previous EAP request found for state 0xc68a57f2c38d425e,
released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: [eaptls verify] = ok
(6) eap_ttls: Done initial handshake
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established. Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls: EAP-Message = 0x020000090175736572
(6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Got tunneled identity of user
(6) eap_ttls: Setting default EAP type for tunneled EAP session
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x020000090175736572
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "user"
(6) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "user", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 0 length 9
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_md5 to process data
(6) eap_md5: Issuing MD5 Challenge
(6) eap: Sending EAP Request (code 1) ID 1 length 22
(6) eap: EAP session adding &reply:State = 0xd0215ee2d0205ac2
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message = 0x0101001604109fa62c4c675ccbe94a61b7b4d4042138
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xd0215ee2d0205ac21ae00777c835cc81
(6) eap_ttls: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 79
(6) eap: EAP session adding &reply:State = 0xc68a57f2c082425e
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(6) EAP-Message =
0x0108004f1580000000451703010040a2973912d62bcef98563ade1bcc6067b2b73e2fe1cbbf4c1e8b96afcbed378b53883725ca74473df40d7d8cd73b5a39eb12ceffe9532185ddfbc8bf5611d499c
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xc68a57f2c082425e5ac878decd35ea4b
(6) Finished request
Waking up in 4.9 seconds.
(6) Cleaning up request packet ID 0 with timestamp +8
(7) Received Access-Request Id 0 from 172.24.85.245:55464 to
172.24.66.67:1812 length 246
(7) User-Name = "user"
(7) NAS-Port-Id = "Ethernet26"
(7) NAS-Port-Type = Ethernet
(7) Calling-Station-Id = "A:1b:20:d5"
(7) Called-Station-Id = "A:01:c8:28"
(7) Framed-MTU = 9214
(7) NAS-IP-Address = 172.24.85.245
(7) EAP-Message =
0x0208007015001703010020117cc179fca36a1b24e3f8bc547a639a51dd747fddfc93f9872fe49b609a780e17030100402326bf769bab17f5bed70f3087955116a91470a2bd7f70feb590b0c08bbe8386acc99da439b8c04f2188ad36e6cc1e988c996d66293d82ee4540c7c57d355924
(7) State = 0xc68a57f2c082425e5ac878decd35ea4b
(7) Message-Authenticator = 0xf5fd8b069858a4eb532fde8c4b2db846
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "user", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 112
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0xd0215ee2d0205ac2
(7) eap: Finished EAP session with state 0xc68a57f2c082425e
(7) eap: Previous EAP request found for state 0xc68a57f2c082425e,
released from the list
(7) eap: Peer sent packet with method EAP TTLS (21)
(7) eap: Calling submodule eap_ttls to process data
(7) eap_ttls: Authenticate
(7) eap_ttls: Continuing EAP-TLS
(7) eap_ttls: [eaptls verify] = ok
(7) eap_ttls: Done initial handshake
(7) eap_ttls: [eaptls process] = ok
(7) eap_ttls: Session established. Proceeding to decode tunneled attributes
(7) eap_ttls: Got tunneled request
(7) eap_ttls: EAP-Message = 0x0201001604102b48d29eccb8a144715231d394679abb
(7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_ttls: Sending tunneled request
(7) Virtual server inner-tunnel received request
(7) EAP-Message = 0x0201001604102b48d29eccb8a144715231d394679abb
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "user"
(7) State = 0xd0215ee2d0205ac21ae00777c835cc81
(7) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "user", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 1 length 22
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) files: users: Matched entry user at line 30
(7) [files] = ok
(7) [expiration] = noop
(7) [logintime] = noop
(7) pap: WARNING: Auth-Type already set. Not setting to PAP
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0xd0215ee2d0205ac2
(7) eap: Finished EAP session with state 0xd0215ee2d0205ac2
(7) eap: Previous EAP request found for state 0xd0215ee2d0205ac2,
released from the list
(7) eap: Peer sent packet with method EAP MD5 (4)
(7) eap: Calling submodule eap_md5 to process data
(7) eap: Sending EAP Success (code 3) ID 1 length 4
(7) eap: Freeing handler
(7) [eap] = ok
(7) } # authenticate = ok
(7) # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel
(7) post-auth {
(7) if (0) {
(7) if (0) -> FALSE
(7) } # post-auth = noop
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) Tunnel-Medium-Type:0 = IEEE-802
(7) Tunnel-Type:0 = VLAN
(7) Tunnel-Private-Group-Id:0 = "101"
(7) EAP-Message = 0x03010004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) User-Name = "user"
(7) eap_ttls: Got tunneled Access-Accept
(7) eap: Sending EAP Success (code 3) ID 8 length 4
(7) eap: Freeing handler
(7) [eap] = ok
(7) } # authenticate = ok
(7) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(7) post-auth {
(7) update {
(7) No attributes updated
(7) } # update = noop
(7) [exec] = noop
(7) policy remove_reply_message_if_eap {
(7) if (&reply:EAP-Message && &reply:Reply-Message) {
(7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(7) else {
(7) [noop] = noop
(7) } # else = noop
(7) } # policy remove_reply_message_if_eap = noop
(7) } # post-auth = noop
(7) Sent Access-Accept Id 0 from 172.24.66.67:1812 to
172.24.85.245:55464 length 0
(7) MS-MPPE-Recv-Key =
0x7f6794c1502ca356eef3509dc34b924f6467cd01e68d2cee4893f0da254fe042
(7) MS-MPPE-Send-Key =
0x168decef518d2d20c147d522f2ede40adf2bf12bd6c6c747845fce108d0e4702
(7) EAP-Message = 0x03080004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) User-Name = "user"
(7) Finished request
Waking up in 4.9 seconds.
(7) Cleaning up request packet ID 0 with timestamp +8
Ready to process requests
^C
Best Regards
Yagna
More information about the Freeradius-Users
mailing list