October 2008 - Freeradius-Devel - lists.freeradius.org

RE: Clone Function Called with each Authentication Request
by dave＠voicenotice.com 11 Oct '08

11 Oct '08

1 0

Please Help!
by niel m 10 Oct '08

10 Oct '08

Hello Guys Im new in radius, I am using CentOS 5 in my radius server. Where I can find the scripts in generating various Certificates? This is for my Server-(Access Point)-Client connections. Any help would be appreciated. Thanks, Niel

2 1

Clone Function Called with each Authentication Request
by David D 10 Oct '08

10 Oct '08

Hi, I'm testing an Authentication script and it's working great. I need to optimize the performance and move some data stored in files into memory. To accomplish this, we planned on placing the routine to read the data into memory in the clone function, so it would load once. >From reading the documentation and the posts I could find. It's my understanding that the CLONE function will only be called once for each new thread created. In my testing I've noticed that the CLONE function get's called for each Authentication request, so it appears the thread is initialized for each call, even though I see it load up all 32 threads when radiusd initializes. The debug output shows all 32 threads calling the clone function and then it shows the clone function called again when an authentication request comes in. Any ideas on what I could check or change? VERSION: radius0-dev:/etc/raddb # radiusd -v radiusd: FreeRADIUS Version 1.1.3, for host x86_64-unknown-linux-gnu, built on May 8 2007 at 19:12:20 Copyright (C) 2000-2006 The FreeRADIUS server project. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matte PERL THREAD INFO: perl -V | grep thread osname=linux, osvers=2.6.18, archname=x86_64-linux-thread-multi config_args='-ds -e -Dprefix=/usr -Dvendorprefix=/usr -Dinstallusrbinperl -Dusethreads -Di_db -Di_dbm -Di_ndbm -Di_gdbm -Duseshrplib=true -Doptimize=-O2 -fmessage-length=0 -Wall -D_FORTIFY_SOURCE=2 -g -Wall -pipe' usethreads=define use5005threads=undef useithreads=define usemultiplicity=define libs=-lm -ldl -lcrypt -lpthread perllibs=-lm -ldl -lcrypt -lpthread dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/CORE' /usr/lib/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi radius0-dev:~ # RADIUSD -X LOADING radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/clients.conf-db000 Config: including file: /etc/raddb/clients.conf-db001 Config: including file: /etc/raddb/clients.conf-db002 Config: including file: /etc/raddb/clients.conf-db003 Config: including file: /etc/raddb/clients.conf-db004 Config: including file: /etc/raddb/clients.conf-db005 Config: including file: /etc/raddb/clients.conf-db006 Config: including file: /etc/raddb/clients.conf-db007 Config: including file: /etc/raddb/clients.conf-db008 Config: including file: /etc/raddb/clients.conf-db009 Config: including file: /etc/raddb/clients.conf-db010 Config: including file: /etc/raddb/clients.conf-db011 Config: including file: /etc/raddb/clients.conf-db012 Config: including file: /etc/raddb/clients.conf-db013 Config: including file: /etc/raddb/clients.conf-db014 Config: including file: /etc/raddb/clients.conf-db015 Config: including file: /etc/raddb/clients.conf-db016 Config: including file: /etc/raddb/clients.conf-db017 Config: including file: /etc/raddb/clients.conf-db018 Config: including file: /etc/raddb/clients.conf-db019 Config: including file: /etc/raddb/clients.conf-db020 Config: including file: /etc/raddb/clients.conf-db021 Config: including file: /etc/raddb/clients.conf-db022 Config: including file: /etc/raddb/clients.conf-db023 Config: including file: /etc/raddb/clients.conf-db024 Config: including file: /etc/raddb/clients.conf-db025 Config: including file: /etc/raddb/clients.conf-db026 Config: including file: /etc/raddb/clients.conf-db027 Config: including file: /etc/raddb/clients.conf-db028 Config: including file: /etc/raddb/clients.conf-db029 Config: including file: /etc/raddb/clients.conf-db030 Config: including file: /etc/raddb/clients.conf-db031 Config: including file: /etc/raddb/clients.conf-db032 main: prefix = "/" main: localstatedir = "/var" main: logdir = "/var/log" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 15 main: cleanup_delay = 5 main: max_requests = 453000 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded perl perl: module = "/etc/raddb/autocutoffv4.pl" perl: func_authorize = "authorize" perl: func_authenticate = "authenticate" perl: func_accounting = "accounting" perl: func_preacct = "preacct" perl: func_checksimul = "checksimul" perl: func_detach = "detach" perl: func_xlat = "xlat" perl: func_pre_proxy = "pre_proxy" perl: func_post_proxy = "post_proxy" perl: func_post_auth = "post_auth" perl: perl_flags = "(null)" perl: func_start_accounting = "(null)" perl: func_stop_accounting = "(null)" perl: max_clones = 32 perl: start_clones = 32 perl: min_spare_clones = 0 perl: max_spare_clones = 32 perl: cleanup_delay = 5 perl: max_request_per_clone = 0 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 IN CLONE FUNCTION 2 Module: Instantiated perl (perl) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail" detail: detailperm = 416 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 198.144.213.39:21646, id=113, length=95 User-Name = "74.167.228.5" User-Password = "cisco" Cisco-AVPair = "h323-ivr-out=transactionID:55" NAS-IP-Address = 197.144.217.39 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_realm: No '@' in User-Name = "74.167.228.5", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 users: Matched entry DEFAULT at line 156 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type Perl auth: type "Perl" Processing the authenticate section of radiusd.conf modcall: entering group Perl for request 0 perl_pool: item 0x555555922ad0 asigned new request. Handled so far: 1 found interpetator at address 0x555555922ad0 rlm_perl: RAD_REQUEST: Client-IP-Address = 197.144.217.39 rlm_perl: RAD_REQUEST: Cisco-AVPair = h323-ivr-out=transactionID:55 rlm_perl: RAD_REQUEST: User-Name = 74.167.228.5 rlm_perl: RAD_REQUEST: User-Password = cisco rlm_perl: RAD_REQUEST: NAS-IP-Address = 197.144.217.39 IN CLONE FUNCTION 2 <==================CALLED AGAIN ON AUTHENTICATION REQUEST In Authenticate In Authenticate 4 In Authenticate rlm_perl: Added pair Auth-Type = Perl perl_pool total/active/spare [32/0/32] Unreserve perl at address 0x555555922ad0 modcall[authenticate]: module "perl" returns reject for request 0 modcall: leaving group Perl (returns reject) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 113 to 198.144.213.39 port 21646 Waking up in 4 seconds... rad_recv: Accounting-Request packet from host 198.144.213.39:21646, id=114, length=888 Acct-Session-Id = "000000A7" Calling-Station-Id = "david" Called-Station-Id = "11" Cisco-AVPair = "call-id=bd06bf19b46a803a@RFNUZWxlY29t" Cisco-AVPair = "iphop=count:1" Cisco-AVPair = "iphop=hop1:74.167.228.5" h323-setup-time = "h323-setup-time=05:58:35.039 UTC Fri Oct 10 2008" h323-gw-id = "h323-gw-id=cisco2691-0." h323-conf-id = "h323-conf-id=4F2CF580 95C711DD 8070BD8A E0E2182D" h323-call-origin = "h323-call-origin=answer" h323-call-type = "h323-call-type=VoIP" Cisco-AVPair = "h323-incoming-conf-id=4F2CF580 95C711DD 8070BD8A E0E2182D" Cisco-AVPair = "subscriber=Unknown" Cisco-AVPair = "session-protocol=sipv2" Cisco-AVPair = "gw-rxd-cdn=ton:0,npi:0,#:11" Acct-Input-Octets = 0 Acct-Output-Octets = 0 Acct-Input-Packets = 0 Acct-Output-Packets = 0 Acct-Session-Time = 0 h323-connect-time = "h323-connect-time=05:58:37.172 UTC Fri Oct 10 2008" h323-disconnect-time = "h323-disconnect-time=05:58:37.172 UTC Fri Oct 10 2008" h323-disconnect-cause = "h323-disconnect-cause=39" h323-remote-address = "h323-remote-address=74.167.228.5" Cisco-AVPair = "release-source=7" h323-voice-quality = "h323-voice-quality=0" Cisco-AVPair = "remote-media-address=74.167.228.5" Cisco-AVPair = "gw-rxd-cgn=ton:0,npi:0,pi:0,si:0,#:david" User-Name = "david" Acct-Status-Type = Stop Service-Type = Login-User NAS-IP-Address = 197.144.217.39 Acct-Delay-Time = 0 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 1 rlm_realm: No '@' in User-Name = "david", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 1 modcall[preacct]: module "files" returns noop for request 1 modcall[preacct]: module "preprocess" returns noop for request 1 modcall: leaving group preacct (returns noop) for request 1 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 1 radius_xlat: '/var/log/radius/radacct/198.144.213.39/detail' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail expands to /var/log/radius/radacct/197.144.217.39/detail modcall[accounting]: module "detail" returns ok for request 1 modcall: leaving group accounting (returns ok) for request 1 Sending Accounting-Response of id 114 to 197.144.217.39 port 21646 Finished request 1 Going to the next request Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 113 with timestamp 48eeef0b Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 114 with timestamp 48eeef0d Nothing to do. Sleeping until we see a request. PERL SECTION OF RADIUSD.CONF perl { # # The Perl script to execute on authorize, authenticate, # accounting, xlat, etc. This is very similar to using # 'rlm_exec' module, but it is persistent, and therefore # faster. # module = /etc/raddb/autocutoffv4.pl # # The following hashes are given to the module and # filled with value-pairs (Attribute names and values) # # %RAD_CHECK Read-only Check items # %RAD_REQUEST Read-only Attributes from the request # %RAD_REPLY Read-write Attributes for the reply # # The return codes from functions in the perl_script # are passed directly back to the server. These # codes are defined in doc/configurable_failover, # src/include/modules.h (RLM_MODULE_REJECT, etc), # and are pre-defined in the 'example.pl' program # which is included. # # # List of functions in the module to call. # Comment out and change if you want to use other # function names than the defaults. # func_authenticate = authenticate #func_authorize = authorize #func_preacct = preacct #func_accounting = accounting #func_checksimul = checksimul #func_pre_proxy = pre_proxy #func_post_proxy = post_proxy #func_post_auth = post_auth #func_xlat = xlat #func_detach = detach # # Comment out the following line if you whish # to use seperate functions for Start and Stop # accounting packets. In that case, the # func_accounting function is not called. # #func_start_accounting = accounting_start #func_stop_accounting = accounting_stop # Uncomment the following lines if your perl is # compiled with ithreads support. # the settings bellow are the default one. # max_clones = 32 start_clones = 32 min_spare_clones = 0 max_spare_clones = 32 cleanup_delay = 5 max_request_per_clone = 0 } -- View this message in context: http://www.nabble.com/Clone-Function-Called-with-each-Authentication-Reques… Sent from the FreeRadius - Dev mailing list archive at Nabble.com.

2 1

Startdate for sessions in FreeRadius with MySql?
by Bladan2000 08 Oct '08

08 Oct '08

Hello! We're using FreeRadius 1.1.7 along with MySql on an Ubuntu server. We have a web application to create users for FreeRadius and administrators can set the expire date for when a session should expire. This is achieved with the "Expiration" attribute in the table called RadCheck in the MySql database. However, a customer would like to be able to also set a "start"-date for when the session should become valid i.e. if I set 2008-10-06 it won't be possible to log in before that date. I haven't found a way to do this in FreeRadius. Does anyone have a solution for this? I thought that it might exist an attribute for "Start" as well when there is one for "Expire" but I haven't found any. The only solution I can come up with is some kind of own customized que handling for this altough I would prefer a simple attribute. Any thoughts? Johan -- View this message in context: http://www.nabble.com/Startdate-for-sessions-in-FreeRadius-with-MySql--tp19… Sent from the FreeRadius - Dev mailing list archive at Nabble.com.

1 0

GIT Log for 2008-10-06 23:33 GMT
by aland＠deployingradius.com 06 Oct '08

06 Oct '08

commit 738b0152abd6562520e087070ddc79446507e5cb Author: Alan T. DeKok <aland(a)freeradius.org> Date: Mon Oct 6 11:33:41 2008 +0200 Move socket listening code to plugin modules. This makes the server core a fair bit simpler, and allows for the creation of many new kinds of listening sockets. The next step is to delete the RAD_LISTEN_TYPE_* names, as they're no longer really needed. The goal is to move much of src/main/event.c into the plugin modules, so that the server core isn't are of the underlying protocols. Files changed: src/include/dhcp.h | 71 + src/include/libradius.h | 2 + src/include/radiusd.h | 87 ++- src/include/smodule.h | 130 -- src/include/stats.h | 5 +- src/include/vmps.h | 20 + src/include/vqp.h | 35 + src/lib/Makefile | 4 +- src/lib/dhcp.c | 1185 ++++++++++++++++ src/lib/vqp.c | 684 +++++++++ src/main/Makefile.in | 11 +- src/main/acct.c | 183 +++ src/main/auth.c | 692 +++++++++ src/main/command.c | 1856 ++++++++++++++++++++++++ src/main/detail.c | 836 +++++++++++ src/main/dhcpd.c | 177 +++ src/main/event.c | 54 +- src/main/listen.c | 699 +++++++++- src/main/session.c | 53 +- src/main/stats.c | 447 ++++++- src/main/threads.c | 57 +- src/main/vmps.c | 115 ++ src/modules/Makefile | 3 +- src/modules/frs_acct/Makefile | 11 - src/modules/frs_acct/frs_acct.c | 324 ----- src/modules/frs_auth/Makefile | 11 - src/modules/frs_auth/frs_auth.c | 857 ------------ src/modules/frs_control/Makefile | 11 - src/modules/frs_control/frs_control.c | 1863 ------------------------- src/modules/frs_detail/Makefile | 11 - src/modules/frs_detail/frs_detail.c | 989 ------------- src/modules/frs_dhcp/Makefile | 11 - src/modules/frs_dhcp/dhcp.c | 1185 ---------------- src/modules/frs_dhcp/dhcp.h | 71 - src/modules/frs_dhcp/frs_dhcp.c | 188 --- src/modules/frs_proxy/Makefile | 11 - src/modules/frs_proxy/frs_proxy.c | 130 -- src/modules/frs_status/Makefile | 11 - src/modules/frs_status/frs_status.c | 628 --------- src/modules/frs_vmps/Makefile | 11 - src/modules/frs_vmps/frs_vmps.c | 122 -- src/modules/frs_vmps/vqp.c | 691 --------- src/modules/frs_vmps/vqp.h | 35 - src/modules/rlm_eap/types/rlm_eap_peap/peap.c | 2 +- src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c | 2 +- 45 files changed, 7093 insertions(+), 7488 deletions(-) ====================================================================== commit 2bf8033089c0e67dd6d9b0529e70cbd5f405e631 Author: Alan T. DeKok <aland(a)freeradius.org> Date: Sun Sep 28 09:07:22 2008 +0200 Temporarily drop permissions See "suid demystified" paper. We drop permissions, but keep a saved UID. Then we restore permissions while binding to sockets. This lets us run as an unprivileged user, but still bind to privileged ports. TO DO: add '-u user -g group -R chroot' to command-line options, and switch UIDs *immediately* on start. This minimizes the amount of code that runs as root. TO DO: move suidup/down calls to wrap the bind() calls, and the BINDTODEVICE calls, to even further minimize the code. Files changed: src/main/event.c | 59 ------------------------------------------------- src/main/mainconfig.c | 26 ++++----------------- 2 files changed, 5 insertions(+), 80 deletions(-) ====================================================================== commit 85359d03d71adf0c118dc72240f2f5de2616b0ca Author: Alan T. DeKok <aland(a)freeradius.org> Date: Sat Oct 4 10:39:52 2008 +0200 Use SUN_LEN, which fixes portability issues Files changed: src/main/command.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) ====================================================================== commit 4c547eab62f5b42cad5c41831c9bfbdc24ea562d Author: Alan T. DeKok <aland(a)freeradius.org> Date: Sun Oct 5 10:38:19 2008 +0200 Moved to libtool 2.2.4 Lots of weird changes, including stupid things... Files changed: Makefile | 2 +- acinclude.m4 | 60 - aclocal.m4 | 112 +- config.guess | 24 +- config.sub | 38 +- configure |17362 ++++++++++++++++++---------------- configure.in | 10 +- libltdl/Makefile.am | 172 +- libltdl/Makefile.in | 520 +- libltdl/README | 27 - libltdl/acinclude.m4 | 6818 ++++++++++++++ libltdl/aclocal.m4 | 6814 +------------- libltdl/argz.c | 254 - libltdl/argz_.h | 71 - libltdl/config-h.in | 108 +- libltdl/config.guess | 1471 +++ libltdl/config.sub | 1599 ++++ libltdl/config/compile | 142 - libltdl/config/config.guess | 1526 --- libltdl/config/config.sub | 1658 ---- libltdl/config/depcomp | 589 -- libltdl/config/install-sh | 519 - libltdl/config/ltmain.sh | 7874 ---------------- libltdl/config/missing | 367 - libltdl/configure |20823 +++++++++++++++++++++++++++++------------ libltdl/configure.ac | 90 +- libltdl/install-sh | 401 + libltdl/libltdl/lt__alloc.h | 58 - libltdl/libltdl/lt__dirent.h | 87 - libltdl/libltdl/lt__glibc.h | 83 - libltdl/libltdl/lt__private.h | 148 - libltdl/libltdl/lt__strl.h | 53 - libltdl/libltdl/lt_dlloader.h | 90 - libltdl/libltdl/lt_error.h | 85 - libltdl/libltdl/lt_system.h | 154 - libltdl/libltdl/slist.h | 94 - libltdl/loaders/dld_link.c | 158 - libltdl/loaders/dlopen.c | 242 - libltdl/loaders/dyld.c | 511 - libltdl/loaders/load_add_on.c | 167 - libltdl/loaders/loadlibrary.c | 251 - libltdl/loaders/preopen.c | 375 - libltdl/loaders/shl_load.c | 222 - libltdl/lt__alloc.c | 95 - libltdl/lt__dirent.c | 107 - libltdl/lt__strl.c | 127 - libltdl/lt_dlloader.c | 210 - libltdl/lt_error.c | 110 - libltdl/ltdl.c | 4033 ++++++-- libltdl/ltdl.h | 388 +- libltdl/ltmain.sh | 6863 ++++++++++++++ libltdl/m4/argz.m4 | 79 - libltdl/m4/libtool.m4 | 7309 --------------- libltdl/m4/ltdl.m4 | 824 -- libltdl/m4/ltoptions.m4 | 368 - libltdl/m4/ltsugar.m4 | 123 - libltdl/m4/ltversion.m4 | 23 - libltdl/m4/lt~obsolete.m4 | 92 - libltdl/missing | 353 + libltdl/slist.c | 375 - ltmain.sh | 7907 +++++++--------- src/include/autoconf.h.in | 108 - 62 files changed, 48680 insertions(+), 53043 deletions(-) ======================================================================

1 0

Use freeradius in windows
by yiyongyun 06 Oct '08

06 Oct '08

Dear everyone: If I use cygwin in windows and add freeradius to cygwin, so that I can modify source and compile it, is that available? best regards yours yiyongyun

1 0

help:how to uesd freeradius in windows
by yiyongyun 06 Oct '08

06 Oct '08

Dear everyone: I want to use freeradius in windows, but I don't know how to deal with the source and compile it. best regards yours yiyongyun

2 1

GIT Log for 2008-10-04 23:33 GMT
by aland＠deployingradius.com 04 Oct '08

04 Oct '08

commit 3b4db32829629508d7f4945ecff3ad0f2a8baa19 Author: Alan T. DeKok <aland(a)freeradius.org> Date: Sat Oct 4 09:39:11 2008 +0200 Fix typos in previous commit src/lib/valuepair.c | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-)

1 0

GIT Log for 2008-10-03 23:33 GMT
by aland＠deployingradius.com 03 Oct '08

03 Oct '08

commit ba683661d2d5842861d485a367162bf45258fd8a Author: Alan T. DeKok <aland(a)freeradius.org> Date: Fri Oct 3 09:28:51 2008 +0200 Initialize nas_address to INADDR_NONE Files changed: src/modules/rlm_radutmp/rlm_radutmp.c | 22 +++++++++++----------- 1 files changed, 11 insertions(+), 11 deletions(-) ====================================================================== commit 7d4564f3e8bea5d62c9e905071297968c2db50be Author: Alan T. DeKok <aland(a)freeradius.org> Date: Wed Oct 1 14:11:21 2008 +0200 Parse attributes that are string Foo = "bar baz" This needs to be parsed as a type, not as a string, if Foo is date, for example. Files changed: src/lib/valuepair.c | 41 ++++++----------------------------------- 1 files changed, 6 insertions(+), 35 deletions(-) ======================================================================

1 0

EAP-TLS Authentication Using TPM Identities
by Carolin Latze 02 Oct '08

02 Oct '08

Hi everybody, just a short note for those who asked themselfes what I was doing and why I asked so many questions on those lists. I implemented a very first (and buggy) prototype for EAP-TLS authentication using TPM identities. If you are interested in the details, have a look at: http://diuf.unifr.ch/people/latzec/prototyping/first/ Thanks for all the help! (I will ask more questions, since I plan two more versions :-D ) Regards Carolin

1 0