- Freeradius-Devel - lists.freeradius.org

help:when freeradius is used on 32-bit redhat linux
by yiyongyun 30 Oct '08

30 Oct '08

Dear everyone: I want to fix freeradius on 32-bit redhat linux, but I do not know the memory(8g）on 32-bit redhat linux is enough for freeradius; If not enough, then I'll fix it on 64-bit redhat linux, but this time the source of freeradius is needed to modify?

2 1

Re: Regular expressions support in FreeRadius.
by Dmitry V. Krivenok 30 Oct '08

30 Oct '08

Anatoly S. Zimin wrote: > Hi! > I compiled freeradius by default and I have regexp support. > I believe I have regexp support too. However, I read this in default radiusd.conf: # Regular expressions # # These items are set at configure time. If they're set to "yes", # then setting them to "no" turns off regular expression support. # # If they're set to "no" at configure time, then setting them to "yes" # WILL NOT WORK. It will give you an error. # regular_expressions = yes extended_expressions = yes According to this comment there is possibility to set these options to "no" at configure time (i.e. when I run ./configure). I think the comment is wrong or outdated. > How your testing regexp? > Might you have regexp support too. > > >> Hello! >> >> As doc says I must not activate regular expressions in radiusd.conf >> if server wasn't compiled with regexp support. >> How can I build freeradius with regular expressions support? >> ./configure --help doesn't show any regexp-related options (like >> --with-pcre). >> >> The following command doesn't show options radiusd was compiled with: >> >> krivenok@develop2 10:43:08 /usr/local/fr_211/sbin $ sudo ./radiusd -v >> radiusd: FreeRADIUS Version 2.1.1, for host i686-pc-linux-gnu, built on >> Oct 28 2008 at 13:10:11 >> Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. >> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A >> PARTICULAR PURPOSE. >> You may redistribute copies of FreeRADIUS under the terms of the >> GNU General Public License. >> For more information about these matters, see the file named COPYRIGHT. >> krivenok@develop2 10:43:25 /usr/local/fr_211/sbin $ >> >> So, how can I check whether radiusd supports regexps? >> >> Thank you beforehand! >> - >> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/devel.html >> > >

1 0

Regular expressions support in FreeRadius.
by Dmitry V. Krivenok 30 Oct '08

30 Oct '08

Hello! As doc says I must not activate regular expressions in radiusd.conf if server wasn't compiled with regexp support. How can I build freeradius with regular expressions support? ./configure --help doesn't show any regexp-related options (like --with-pcre). The following command doesn't show options radiusd was compiled with: krivenok@develop2 10:43:08 /usr/local/fr_211/sbin $ sudo ./radiusd -v radiusd: FreeRADIUS Version 2.1.1, for host i686-pc-linux-gnu, built on Oct 28 2008 at 13:10:11 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. krivenok@develop2 10:43:25 /usr/local/fr_211/sbin $ So, how can I check whether radiusd supports regexps? Thank you beforehand!

1 0

Segmentation fault after migrating from 2.0.5 to 2.1.1
by Dmitry V. Krivenok 29 Oct '08

29 Oct '08

Hello! I'm developing my own rlm. I copied the code below from rlm_example.c: /* * Look for the 'state' attribute. */ state = pairfind(request->packet->vps, PW_STATE); if (state != NULL) { RDEBUG("Found reply to access challenge"); return RLM_MODULE_OK; } After compiling my module under fr-2.1.1 I got segmentation fault. gdb determined that error occurs in pairfind: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0xb7ba4ac0 (LWP 9773)] 0xb7b360fa in osb_authorize (inst=0x8179e30, request=0x819c670) at rlm_osb.c:73 73 if(pairfind(request->packet->vps, PW_STATE)) I found that request->packet is NULL. Is it correct request? How should I handle requests with packet field == NULL? Thank you beforehand! P.S. All worked fine with fr-2.0.5.

3 2

who has the registration code for software RadiusTest 2.4.3
by yiyongyun 29 Oct '08

29 Oct '08

hi everyone: Who can provide the registration code for software RadiusTest?

2 1

Help with attr_rewrite
by Hoppál Felicián 28 Oct '08

28 Oct '08

Hello, I have clients that authenticate with username/pw void/void and a Calling-Station-Id. I would like to replace the User-Name attribute with Calling-Station-Id, but only for a specific huntgroup. Is that possible with FreeRADIUS? Thanks, Felician Hoppal

1 0

request->packet == NULL. Possible bug (simple example is provided).
by Dmitry V. Krivenok 27 Oct '08

27 Oct '08

Hello! Please look at the simplest rlm I wrote to demonstrate strange problem: krivenok@develop2 22:21:06 ~/work/svn/libs/rlm_osb/trunk $ cat rlm_osb.c #include <freeradius-devel/radiusd.h> #include <freeradius-devel/modules.h> /////////////////////////////////////////////////////////////////////////////// static int osb_instantiate(CONF_SECTION *conf, void **instance) { return 0; } /////////////////////////////////////////////////////////////////////////////// static int osb_authorize(void *inst, REQUEST *request) { DEBUG("rlm_osb: REQUEST %p", request); DEBUG("rlm_osb: PACKET %p", request->packet); return RLM_MODULE_NOOP; } /////////////////////////////////////////////////////////////////////////////// static int osb_detach(void *instance) { return 0; } /////////////////////////////////////////////////////////////////////////////// module_t rlm_osb = { RLM_MODULE_INIT, "osb", RLM_TYPE_THREAD_SAFE, /* type */ osb_instantiate, /* instantiation */ osb_detach, /* detach */ { NULL, /* authentication */ osb_authorize, /* authorization */ NULL, /* preaccounting */ NULL, /* accounting */ NULL, /* checksimul */ NULL, /* pre-proxy */ NULL, /* post-proxy */ NULL /* post-auth */ }, }; /////////////////////////////////////////////////////////////////////////////// krivenok@develop2 22:21:10 ~/work/svn/libs/rlm_osb/trunk $ make gcc -g -fPIC -DPIC -c -MD -Wall -I/home/krivenok/dev_builds/freeradius-server-current/src/ rlm_osb.c gcc -g -shared -Wl,-soname,rlm_osb-current.so -o rlm_osb-current.so rlm_osb.o krivenok@develop2 22:21:25 ~/work/svn/libs/rlm_osb/trunk $ sudo make install install rlm_osb-current.so /usr/local/fr_curr/lib ln -fs /usr/local/fr_curr/lib/rlm_osb-current.so /usr/local/fr_curr/lib/rlm_osb.so krivenok@develop2 22:21:37 ~/work/svn/libs/rlm_osb/trunk $ So far, so good. Module was compiled and installed successfully. The latest freeradius version is used (got via git): krivenok@develop2 22:19:03 /usr/local/fr_curr/sbin $ sudo ./radiusd -v radiusd: FreeRADIUS Version 2.1.2, for host i686-pc-linux-gnu, built on Oct 27 2008 at 19:29:35 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. krivenok@develop2 22:19:11 /usr/local/fr_curr/sbin $ Lets start the server in debug mode: krivenok@develop2 22:37:21 /usr/local/fr_curr/sbin $ sudo ./radiusd -X FreeRADIUS Version 2.1.2, for host i686-pc-linux-gnu, built on Oct 27 2008 at 19:29:35 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/fr_curr/etc/raddb/radiusd.conf including configuration file /usr/local/fr_curr/etc/raddb/proxy.conf including configuration file /usr/local/fr_curr/etc/raddb/clients.conf including files in directory /usr/local/fr_curr/etc/raddb/modules/ including configuration file /usr/local/fr_curr/etc/raddb/modules/attr_filter including configuration file /usr/local/fr_curr/etc/raddb/modules/ippool including configuration file /usr/local/fr_curr/etc/raddb/modules/expr including configuration file /usr/local/fr_curr/etc/raddb/modules/acct_unique including configuration file /usr/local/fr_curr/etc/raddb/modules/counter including configuration file /usr/local/fr_curr/etc/raddb/modules/osb including configuration file /usr/local/fr_curr/etc/raddb/modules/policy including configuration file /usr/local/fr_curr/etc/raddb/modules/logintime including configuration file /usr/local/fr_curr/etc/raddb/modules/mac2ip including configuration file /usr/local/fr_curr/etc/raddb/modules/sradutmp including configuration file /usr/local/fr_curr/etc/raddb/modules/wimax including configuration file /usr/local/fr_curr/etc/raddb/modules/digest including configuration file /usr/local/fr_curr/etc/raddb/modules/perl including configuration file /usr/local/fr_curr/etc/raddb/modules/mac2vlan including configuration file /usr/local/fr_curr/etc/raddb/modules/krb5 including configuration file /usr/local/fr_curr/etc/raddb/modules/passwd including configuration file /usr/local/fr_curr/etc/raddb/modules/unix including configuration file /usr/local/fr_curr/etc/raddb/modules/detail.log including configuration file /usr/local/fr_curr/etc/raddb/modules/chap including configuration file /usr/local/fr_curr/etc/raddb/modules/radutmp including configuration file /usr/local/fr_curr/etc/raddb/modules/smbpasswd including configuration file /usr/local/fr_curr/etc/raddb/modules/attr_rewrite including configuration file /usr/local/fr_curr/etc/raddb/modules/always including configuration file /usr/local/fr_curr/etc/raddb/modules/realm including configuration file /usr/local/fr_curr/etc/raddb/modules/echo including configuration file /usr/local/fr_curr/etc/raddb/modules/mschap including configuration file /usr/local/fr_curr/etc/raddb/modules/inner-eap including configuration file /usr/local/fr_curr/etc/raddb/modules/files including configuration file /usr/local/fr_curr/etc/raddb/modules/detail.example.com including configuration file /usr/local/fr_curr/etc/raddb/modules/preprocess including configuration file /usr/local/fr_curr/etc/raddb/modules/pam including configuration file /usr/local/fr_curr/etc/raddb/modules/sql_log including configuration file /usr/local/fr_curr/etc/raddb/modules/pap including configuration file /usr/local/fr_curr/etc/raddb/modules/linelog including configuration file /usr/local/fr_curr/etc/raddb/modules/ldap including configuration file /usr/local/fr_curr/etc/raddb/modules/etc_group including configuration file /usr/local/fr_curr/etc/raddb/modules/checkval including configuration file /usr/local/fr_curr/etc/raddb/modules/expiration including configuration file /usr/local/fr_curr/etc/raddb/modules/detail including configuration file /usr/local/fr_curr/etc/raddb/modules/exec including configuration file /usr/local/fr_curr/etc/raddb/eap.conf including configuration file /usr/local/fr_curr/etc/raddb/sql.conf including configuration file /usr/local/fr_curr/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/fr_curr/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/fr_curr/etc/raddb/policy.conf including files in directory /usr/local/fr_curr/etc/raddb/sites-enabled/ including configuration file /usr/local/fr_curr/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/fr_curr/etc/raddb/sites-enabled/default including dictionary file /usr/local/fr_curr/etc/raddb/dictionary main { prefix = "/usr/local/fr_curr" localstatedir = "/usr/local/fr_curr/var" logdir = "/usr/local/fr_curr/var/log/radius" libdir = "/usr/local/fr_curr/lib" radacctdir = "/usr/local/fr_curr/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/fr_curr/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/fr_curr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/fr_curr/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/fr_curr/etc/raddb/certs/server.pem" certificate_file = "/usr/local/fr_curr/etc/raddb/certs/server.pem" CA_file = "/usr/local/fr_curr/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/fr_curr/etc/raddb/certs/dh" random_file = "/usr/local/fr_curr/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/fr_curr/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/fr_curr/etc/raddb/users" acctusersfile = "/usr/local/fr_curr/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/fr_curr/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/fr_curr/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/fr_curr/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/fr_curr/etc/raddb/huntgroups" hints = "/usr/local/fr_curr/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_osb Module: Instantiating osb Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/fr_curr/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/fr_curr/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on auth address * port 1812 Listening on acct address * port 1813 Listening on proxy address * port 1814 Ready to process requests. and then send test packet: krivenok@develop2 22:37:39 /usr/local/fr_curr/bin $ cat ~/radius_test.txt User-Name = "some_user" User-Password = "some_pass" Nas-Ip-Address = "192.168.1.1" krivenok@develop2 22:39:08 /usr/local/fr_curr/bin $ cat ~/radius_test.txt | sudo ./radclient localhost auth testing123 Received response ID 140, code 3, length = 20 krivenok@develop2 22:39:15 /usr/local/fr_curr/bin $ Lets look at daemon's output: rad_recv: Access-Request packet from host 127.0.0.1 port 29966, id=140, length=55 User-Name = "some_user" User-Password = "some_pass" NAS-IP-Address = 192.168.1.1 +- entering group authorize {...} ++[preprocess] returns ok rlm_osb: REQUEST 0x8174730 rlm_osb: PACKET (nil) ++[osb] returns noop ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "some_user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> some_user attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 140 to 127.0.0.1 port 29966 Waking up in 4.9 seconds. Cleaning up request 0 ID 140 with timestamp +68 Ready to process requests. What about the following output? rlm_osb: REQUEST 0x8174730 rlm_osb: PACKET (nil) ++[osb] returns noop request->packet is NULL. It looks like a bug. Isn't it? According to this output, request was received properly: User-Name = "some_user" User-Password = "some_pass" NAS-IP-Address = 192.168.1.1 However request->packet field is NULL. Any ideas? P.S. All worked fine with freeradius-2.0.5.

1 0

patch: GMT timestamp
by Alexander Kolesnik 24 Oct '08

24 Oct '08

Hello, Please include the following patch for version 1.1.3 and futhers (gmt_timestamp.patch): --- src/main/xlat.c.orig 2006-07-13 20:40:54.000000000 +0400 +++ src/main/xlat.c 2006-10-23 18:16:11.733950598 +0400 @@ -782,6 +782,15 @@ } p++; break; + case 'G': /* request GMT timestamp in SQL format*/ + TM = gmtime_r(&request->timestamp, &s_TM); + len = strftime(tmpdt, sizeof(tmpdt), "%Y-%m-%d %H:%M:%S", TM); + if (len > 0) { + strNcpy(q, tmpdt, freespace); + q += strlen(q); + } + p++; + break; case 'H': /* request hour */ TM = localtime_r(&request->timestamp, &s_TM); len = strftime(tmpdt, sizeof(tmpdt), "%H", TM); Description: This patch introduces %G macro to be used in radius config files (mostly, in sql queries). It behaves like %S but unlike puts a GMT timestamp. -- Regards, Alexander

1 0

Reg Fingerprint Authentication in Radius Server
by Nagarjuna Bandi 24 Oct '08

24 Oct '08

Hi All, I was newly joined in freeradius developers mailing list, first i will introduce my self briefly, i have to develop a radius server which authenticate the users with their finger print, so please tell me what i have to do for that now i am going through some examples how the authentication is made with username and passwords but i was unable to find how to integrate this finger print authentication in radius server, so please help me regarding this. Thanks in advance. Regards, Nagarjuna Bandi. Connect with friends all over the world. Get Yahoo! India Messenger at http://in.messenger.yahoo.com/?wm=n/

2 1

failure to compile 2.1.1 on Redhat ES3
by A.L.M.Buxey＠lboro.ac.uk 23 Oct '08

23 Oct '08

hi, just tried to compile FR 2.1.1 on a more vintage system than what I normally find myself on - RedHat ES 3 Theres a compile issue with Python module which didnt exist on the same platform with 2.0.5 - but I'll ignore that one for now - the important part is the base daemon itself: /usr/src/freeradius-server-2.1.1/libtool --mode=compile gcc -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/src/freeradius-server-2.1.1/src -DHOSTINFO=\"i686-pc-linux-gnu\" -DRADIUSD_VERSION=\"2.1.1\" -DOPENSSL_NO_KRB5 -c listen.c gcc -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/src/freeradius-server-2.1.1/src -DHOSTINFO=\"i686-pc-linux-gnu\" -DRADIUSD_VERSION=\"2.1.1\" -DOPENSSL_NO_KRB5 -c listen.c -fPIC -DPIC -o .libs/listen.o listen.c:99:1: directives may not be used inside a macro argument listen.c:98:54: unterminated argument list invoking macro "rad_assert" listen.c: In function `client_listener_find': listen.c:100: `rad_assert' undeclared (first use in this function) listen.c:100: (Each undeclared identifier is reported only once listen.c:100: for each function it appears in.) listen.c:111: syntax error before ')' token listen.c:141: warning: passing arg 1 of pointer to function discards qualifiers from pointer target type listen.c:220: warning: assignment discards qualifiers from pointer target type In file included from listen.c:1024: command.c: In function `command_show_client_config': command.c:805: warning: passing arg 2 of `cf_section2file' discards qualifiers from pointer target type gmake[4]: *** [listen.lo] Error 1 gmake[4]: Leaving directory `/usr/src/freeradius-server-2.1.1/src/main' gmake[3]: *** [common] Error 2 gmake[3]: Leaving directory `/usr/src/freeradius-server-2.1.1/src' gmake[2]: *** [all] Error 2 gmake[2]: Leaving directory `/usr/src/freeradius-server-2.1.1/src' gmake[1]: *** [common] Error 2 gmake[1]: Leaving directory `/usr/src/freeradius-server-2.1.1' make: *** [all] Error 2 $gcc -v Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/3.2.3/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --host=i386-redhat-linux Thread model: posix gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-59) any more info needed? alan

2 1