December 2005 - Freeradius-Users - lists.freeradius.org

RE: Documentation on Group Locking using FreeRADIUS/AD/Cisco VPNConcentrator
by Alhagie Puye 12 Dec '05

12 Dec '05

No suggestions on this? This is an awesome product. No doubt!!! However I think we will benefit more with better documentation. Alhagie Puye - Network Engineer Datawave Group of Companies (604)295-1817 > >-----Original Message----- > >From: freeradius-users-bounces(a)lists.freeradius.org > >[mailto:freeradius-users-bounces@lists.freeradius.org] On > >Behalf Of Alhagie Puye > >Sent: December 9, 2005 3:05 PM > >To: FreeRadius users mailing list > >Subject: Documentation on Group Locking using > >FreeRADIUS/AD/Cisco VPNConcentrator > > > >Hello all, > > > >I have spent a few bit of time trying to get > >FreeRADIUS/Active Directory/Cisco VPN Concentrator 3005 to > >lock users into group using the class attribute. Dusty Doris > >gave me a hand too. It has been tested and it works as expected. > > > >http://www.cisco.com/warp/public/471/altigagroup.html > > > >This feature is very, very neat and flexible. > > > > > >I would now like to write up a step-by-step document on how > >to make these work together. I don't have a public web site > >to host this page. > >I'm looking for suggestions on how to make it readily > >available to other users since the VPN Concentrator is > >gaining popularity. > > > > > >Is the wiki page mentioned here a while back going to > >materialize? Or should I write up a text document so that it > >could be added to doc/ directory in the source code? > > > >I would hate for someone to have to reinvent the wheel on this issue. > > > > > >Alhagie Puye - Network Engineer > >Datawave Group of Companies > >(604)295-1817 > > > > > >This message (including any attachments) is confidential, > >may be privileged and is only intended for the person to > >whom it is addressed. If you have received it by mistake > >please notify the sender by return e-mail and delete this > >message from your system. Any unauthorized use or > >dissemination of this message in whole or in part is > >strictly prohibited. E-mail communications are inherently > >vulnerable to interception by unauthorized parties and are > >susceptible to change. We will use alternate communication > >means upon request. > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change. We will use alternate communication means upon request.

1 0

Memory big problem
by Dimple 12 Dec '05

12 Dec '05

Hi everyone, I installed latest freeradius cvs-snapshot freeradius-snapshot-20051130 on Debian Linux 10 vs Oracle db 10 and Oracle Internet Directory (LDAP) 10. I have about 30 clients in clients.conf and about 30 connections in a second, including accounting requests. I have 8G RAM on server and freeradius daemon takes away all free memory within two day! "max_requests_per_server = 300" option did not help. I use following modules in my radiusd.conf: acct_unique, attr_rewrite, chap, checkval, detail, dictionary, expiration, files, ldap, logintime, mschap, pap, preprocess, sql, sql_oracle, sqlcounter. I understand, what the information has not enough, but somebody can will prompt, what module most likely uses for itself all memory? Excuse for my English.

3 2

skip authentication
by thgjerde 12 Dec '05

12 Dec '05

Is it possible to authorize users without authenticating them first?

2 1

Signal 10
by Doug Hardie 11 Dec '05

11 Dec '05

I have a primary and backup freeradius server running on different machines. For the last couple days they have both been receiving a signal 10 at almost the same time. The secondary server gets the signal exactly 10 seconds after the primary. The time between the signals varies from a few hours to a week or so. I can't seem to find anything else that is going on at that time. The secondary system is basically idle. It only handles a test check every 10 minutes. So far none of the signals have occurred within 2 minutes of one of those test checks. The primary server is quite busy. Nothing unusual shows in the radius.log, Messages shows the signal 10 but no core dump and none is actually generated. I have some internal debugging in my rlms and I enabled that but nothing shows there either. I suspect its a request from somewhere. I am going to enable tcpdump on the secondary server but am at a loss to figure out how to get a core dump. I don't see any place in the code where signal 10 is redirected. Any other ideas on how to diagnose this problem? Thanks.

3 4

rlm_sql_mysql on FreeBSD 5.4 - Segmentation fault at startup
by Matthew Horoschun 09 Dec '05

09 Dec '05

Hi All, I'm having trouble getting FreeRadius (CVS) working with MySQL 5.0.15 on FreeBSD 5.4. I have been testing successfully with PostgreSQL up until now. Running under gdb: ... rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): failed after re-connect rlm_sql (sql): Error retrieving group list rlm_sql (sql): Error processing groups; rejecting user rlm_sql (sql): Released sql socket id: 0 Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 1 (LWP 100524)] 0x08059635 in safe_unlock (instance=0x0) at modcall.c:227 227 if (instance->mutex) (gdb) bt #0 0x08059635 in safe_unlock (instance=0x0) at modcall.c:227 #1 0x0805971c in call_modsingle (component=1, sp=0x8139140, request=0x806f800, default_result=6) at modcall.c:258 #2 0x08059dc6 in modcall (component=1, c=0x8139140, request=0x806f800) at modcall.c:590 #3 0x0805979f in call_one (component=1, p=0x8139140, request=0x806f800, priority=0xbfbfd1e0, result=0xbfbfd1e4) at modcall.c:287 #4 0x08059896 in call_modgroup (component=1, g=0x8135ec0, request=0x806f800, default_result=6) at modcall.c:342 #5 0x08059d3b in modcall (component=1, c=0x8135ec0, request=0x806f800) at modcall.c:575 #6 0x0805876c in indexed_modcall (comp=1, idx=0, request=0x806f800) at modules.c:428 #7 0x08059271 in module_authorize (autz_type=0, request=0x806f800) at modules.c:936 #8 0x0804d412 in rad_authenticate (request=0x806f800) at auth.c:548 #9 0x0805e00a in rad_respond (request=0x806f800, fun=0x804d25c <rad_authenticate>) at request_process.c:451 #10 0x0805fbad in thread_pool_addrequest (request=0x806f800, fun=0x804d25c <rad_authenticate>) at threads.c:901 #11 0x0805be34 in main (argc=2, argv=0xbfbfebfc) at radiusd.c:668 I noticed that people have had somewhat similar problems (http://lists.cistron.nl/pipermail/freeradius-users/2005-September/047030.ht…) but I'm not sure that this is the same thing. Matthew.

5 6

Segmentation fault when using check_cert_cn in eap.conf
by Brett C Miller 09 Dec '05

09 Dec '05

Hello, I am hoping someone else has ran into my problem. I am running freeradius 1.0.5 in a 802.1x configuration with Cisco 1200 access points. I have configured eap_tls and everything works great (users can authenticate and access resources) until I uncomment "check_cert_cn=%{User-Name}" in the eap.conf file. When this line is uncommented and the user tries to authenticate with a previously working configuration, the server has a segmentation fault. I have verified this result using a linux, windows, and macosx client. At this point I have not added any usernames to the "users" file. It seems the server should reject the authentication request if the users credentials cannot be found in the users file, not throw a segmentation fault. Is there are problem when the Username and common name are different within the certificate?This is true with the Globalsign certificates we are using. I have seen a post that went unanswered about on this subject. The link is below. I have reproduced the segmentation fault in both 1.0.4 and 1.0.5. Thanks for any assistance you can give, I am really at a loss. :( I have also seen a question that pertains to my problem. Was there a solution? http://www.mail-archive.com/freeradius-users@lists.freeradius.org/ msg13518.html OS: Debian Sarge Openssl version: 0.9.7e Thanks Brett log file: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius3/proxy.conf Config: including file: /etc/freeradius3/clients.conf Config: including file: /etc/freeradius3/snmp.conf Config: including file: /etc/freeradius3/eap.conf Config: including file: /etc/freeradius3/sql.conf main: prefix = "/usr/local/freeradius3" main: localstatedir = "/usr/local/freeradius3/var" main: logdir = "/var/log/freeradius3" main: libdir = "/usr/local/freeradius3/lib" main: radacctdir = "/var/log/freeradius3" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = yes main: log_file = "/var/log/freeradius3/freeradius3.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = yes main: pidfile = "/usr/local/freeradius3/var/run/radiusd/radiusd.pid" main: bind_address = 10.120.0.27 IP address [10.120.0.27] main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/freeradius3/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/freeradius3/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/freeradius3/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "tls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = yes rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/freeradius3/certs/wirelesslan.bah.com.key" tls: certificate_file = "/etc/freeradius3/certs/wirelesslan.bah.com.pub" tls: CA_file = "/etc/freeradius3/certs/certs.pem" tls: private_key_password = "(null)" tls: dh_file = "/etc/freeradius3/certs/dh" tls: random_file = "/etc/freeradius3/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "%{User-Name}" rlm_eap: Loaded and initialized type tls peap: default_eap_type = "tls" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius3/huntgroups" preprocess: hints = "/etc/freeradius3/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/freeradius3/users" files: acctusersfile = "/etc/freeradius3/acct_users" files: preproxy_usersfile = "/etc/freeradius3/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/freeradius3/%{Client-IP-Address}/ detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/freeradius3/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = no radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication 10.120.0.27:1812 Listening on accounting 10.120.0.27:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.120.0.3:1645, id=234, length=169 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0xe5515c138accf22a37416c2027732e40 EAP-Message = 0x02010019016d696c6c65725f6272657474406261682e636f6d NAS-Port-Type = Wireless-802.11 NAS-Port = 738 NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 25 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Requiring client certificate rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 234 to 10.120.0.3:1645 EAP-Message = 0x010200060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x165dc27d9eaf31fb476ce6f5a7cc5683 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=235, length=264 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0x1cec338b5f5748130c7553596d4cd2f0 EAP-Message = 0x020200660d800000005c16030100570100005303014399e74094a93a57397fc8b744ab 783e2b5fde9569af40d044c9728f715d8ae400002c00050004000aff830009ff82000300 080006ff8000010016001500140013001200110018001b001a001700190100 NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0x165dc27d9eaf31fb476ce6f5a7cc5683 NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 2 length 102 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0057], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0e72], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0120], CertificateRequest TLS_accept: SSLv3 write certificate request A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 235 to 10.120.0.3:1645 EAP-Message = 0x0103040a0dc000000feb160301004a0200004603014399e74017aac97b9fbde271c605 a1bd3ecc329becb52df6490a50b253a6c19d20957027d9cd2c71d45e4de98416c76e55ce 619e683e97441ae24400768b6b5e490005001603010e720b000e6e000e6b00038e308203 8a30820272a003020102020206b0300d06092a864886f70d01010505003051310b300906 0355040613025553310c300a060355040a130342414831133011060355040b130a436f6d 706f6e656e7473311f301d06035504031316426f6f7a20416c6c656e2048616d696c746f 6e204341301e170d3034313230333231323931395a170d3037303630343231323931395a 304e EAP-Message = 0x310b3009060355040613025553310c300a060355040a13034241483113301106035504 0b130a436f6d706f6e656e7473311c301a06035504031313776972656c6573736c616e2e 6261682e636f6d30819f300d06092a864886f70d010101050003818d0030818902818100 cc5f09a86ce048ad23f86770f60d9d89f6c2f3c83bfa2007d4d9639091d1e5cb9a32d5d2 946c4df07b8e9e3d67b3bdb25ab634b1d3d5301b332979386dd5b174af08a13f9d6bb192 6a14cf31f5fcf221c2d72f34a08ca4c0472ee05adf3f2792f1297d6d7c5db7efe7dbdfa4 668d96fa399be6ca2a6428db6c25cd174638c6a30203010001a381f23081ef300e060355 1d0f EAP-Message = 0x0101ff0404030205a0301d0603551d0e04160414f307b4c578f4f45f9a295a3a1549e5 f4a2f4f8b8301f0603551d23041830168014e07d84c5bcb46553f2a25d9b8038d06c1c9e 9dc230180603551d200411300f300d060b2b06010401de000103020130620603551d1f04 5b30593057a055a05386516c6461703a2f2f64697273796e632e757361652e6261682e63 6f6d2f636e3d426f6f7a20416c6c656e2048616d696c746f6e2043412c206f753d436f6d 706f6e656e74732c206f3d4241482c20633d5553301f0603551d110418301681146d696c 6c65725f6272657474406261682e636f6d300d06092a864886f70d010105050003820101 001d EAP-Message = 0x221c42c9ada1d932fc738e7dfcd79c7e43ca09b18613526e601a9c3259191951294cf0 f84faf7ce91f7f14e166b72e10c613096b1accc1a7ad36bbd1ad42722e1cf684ee640445 804295816b774012a83f3c9f1268725ae846b3cdaac58b26aa598eaa2a0b44335b27fdb6 6fee6c88f2ac791674aab437630a442368ea38fa8e6223639221f36b130d28cf49867dcd 3741d32d08b75773fd6646c677749679a33cf9f7f402ac9dd9ceeac612617f79f645a36d a5ae572d0211760c81ba8a9686a568e1f7b9e1a40c0355959ddbace1c59974194337d1cb ca464f128c357168f94820582ce9cd5feccea3169a08a111015ab24a1689b0174b5bda62 a2dc EAP-Message = 0x52060003b6308203b23082029aa003020102020b0300 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8a735a3b7837decd3545d5aa80336f2c Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=236, length=168 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0x5602bdacab532e7f999c70612750d07a EAP-Message = 0x020300060d00 NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0x8a735a3b7837decd3545d5aa80336f2c NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 236 to 10.120.0.3:1645 EAP-Message = 0x0104040a0dc000000feb00000000ec99bcff6e300d06092a864886f70d010105050030 5f310b300906035504061302424531193017060355040a1310476c6f62616c5369676e20 6e762d736131143012060355040b130b506172746e657273204341311f301d0603550403 1316476c6f62616c5369676e20506172746e657273204341301e170d3032303331353131 323632325a170d3038313233313132303030305a3051310b300906035504061302555331 0c300a060355040a130342414831133011060355040b130a436f6d706f6e656e7473311f 301d06035504031316426f6f7a20416c6c656e2048616d696c746f6e2043413082012230 0d06 EAP-Message = 0x092a864886f70d01010105000382010f003082010a0282010100b0077e0646fcb615f3 57a5e0dfe0d5b052a32d1c5bed5297e005f4fc73e7ef6c3d1f64eb88b20dcd1ac33bddc9 28d0618616452c27a56493594cf3cad054765d444cd1527f1a0b78f7cc34315e5456770a 66ecfdbbbe6855adb479c3fedbdf721731bd863449c8619d217f6ce2c6ee303e8f1f50dd 1e9bee6f192bdcc2f862774560f19c8a0db78ffe4c0c039e164276c2d8592fcc274cf832 431410d983550ce4894b1e9c6d93581ee5018f95a220f39b53cff9e41f9f801373e63201 085ea7025a289b03ab757927b6a158e58f21b0600006f54778f13158b02636574d1c94d0 f483 EAP-Message = 0x33e6995681ef4afca76b65d93a7a13b3eeefae3634db2d2f98e54eeb990203010001a3 7d307b300e0603551d0f0101ff040403020186300f0603551d130101ff040530030101ff 30180603551d200411300f300d060b2b06010401de0001030201301d0603551d0e041604 14e07d84c5bcb46553f2a25d9b8038d06c1c9e9dc2301f0603551d230418301680144324 8d70150862559c4f0c40175d865e0fa24cfb300d06092a864886f70d0101050500038201 010026de75dbe1c1aaf83bf2eca52de9d8bf7b91a59a3c24d194e353ff9873d2f7a722ae f0ed3e7a527d2d33e853644dc34c70dd652575f30c2c624676c0efc4a84a2847e0c8c464 fbbf EAP-Message = 0x4514ef408c7f0a2b2ca33321a015b4b50b4f4a5a1823cae2f1e10007d0ffc5a03d449c c4ec06c3f9f4267d49a3b6af61a4ad2e097c2b435463f0bc2b87aebb22e21e0e6a4f6e60 0d37c32acce5ce7050a0427abe9d99bb03c6eadf9d57ca71839218a40355f0e21a6b75ec 595ec7c3b21001169f45ef082640074a8058c60cf2f8ff5371f92c316eb9c064d6c65a72 75df55ff3182ed2bf47a27889e3c84ab1c40a85712f35c23d486b7c9d8291758c3d3fbab 8829dcdd880003a23082039e30820286a003020102020b020000000000d678b9d1af300d 06092a864886f70d01010405003057310b30090603550406130242453119301706035504 0a13 EAP-Message = 0x10476c6f62616c5369676e206e762d73613110300e06 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xad02c72864260730b0a95da8a6cd5778 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=237, length=168 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0xff7fe42128e425ade791eb0e043eeb22 EAP-Message = 0x020400060d00 NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0xad02c72864260730b0a95da8a6cd5778 NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 3 modcall: group authorize returns updated for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 3 modcall: group authenticate returns handled for request 3 Sending Access-Challenge of id 237 to 10.120.0.3:1645 EAP-Message = 0x0105040a0dc000000feb0355040b1307526f6f74204341311b30190603550403131247 6c6f62616c5369676e20526f6f74204341301e170d3939303132383132303030305a170d 3039303132383132303030305a305f310b30090603550406130242453119301706035504 0a1310476c6f62616c5369676e206e762d736131143012060355040b130b506172746e65 7273204341311f301d06035504031316476c6f62616c5369676e20506172746e65727320 434130820122300d06092a864886f70d01010105000382010f003082010a0282010100d2 2cf832ac4a127a37c82991a5ae8c6e1e0ec0343388e53371161c788468c31834502e163e b194 EAP-Message = 0x824fb19a9f00f8c61135c6697b9802ad0006886ce74c3328008827461f87b3717563bc 32bb88de66180e500693b4f6bc1437303d22df3dff757ed90a1ac59fb3fcd0acb3087a89 d301e8005ce74a0b3d4d7b26a2b762068bda46dd93173f3f5b024b0bb68820119200adbb c72ed4e345aef5895a7c8da4ad856432c0278cc6f28a8092862456598d7468a28342b39e 3d5041866f206ef6fdced319e332cc8fed9a5e6d1f28f552ac6e185ef83dd192e5ba6c01 884b0af22dde65330542a04caa3176befdbf8178f9711c465e2d15952d30598e4c41d162 ab3d0203010001a3633061300e0603551d0f0101ff040403020006301d0603551d0e0416 0414 EAP-Message = 0x43248d70150862559c4f0c40175d865e0fa24cfb301f0603551d23041830168014607b 661a450d97ca89502f7d04cd34a8fffcfd4b300f0603551d130101ff040530030101ff30 0d06092a864886f70d0101040500038201010066edb488691199822183aca16d8b9b84ad 0f2dc81e8cca7b7eadaad48ede07d69e45c7a5b89c07396025551ac04f19e5cf17294989 183566e5eb28404e57c9afb3e4b82005a33b9550914994297d2ce58841a545885e9d8227 f7d2ef5bb54f9fbefe35652c55649fe151da226177ba584e8fc67959596e3080a24f906e 210badd0683990109bed22656f1e1138e67f8cd2f3396d47d521e8ea753a41d1adf6169d 5d0b EAP-Message = 0x21bdf31f6306251dc11f35712ceb2019d5c1b0ec3de56fed02073f137b6692d644c198 f75f508b7a5bc26f6db0d1f8e574a04037a3250fe43dca643193905c307bb939319a5e4c cdb9414f50e43d38aec866d9c73b5d5147ac9babf2ad000379308203753082025da00302 0102020b020000000000d678b79405300d06092a864886f70d01010405003057310b3009 06035504061302424531193017060355040a1310476c6f62616c5369676e206e762d7361 3110300e060355040b1307526f6f74204341311b301906035504031312476c6f62616c53 69676e20526f6f74204341301e170d3938303930313132303030305a170d313430313238 3132 EAP-Message = 0x303030305a3057310b30090603550406130242453119 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5a3c9c2dfd37d0eacb99d4770ff125fb Finished request 3 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=238, length=168 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0x5412e3a867de65818277cb39aa002f29 EAP-Message = 0x020500060d00 NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0x5a3c9c2dfd37d0eacb99d4770ff125fb NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 5 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 4 modcall: group authenticate returns handled for request 4 Sending Access-Challenge of id 238 to 10.120.0.3:1645 EAP-Message = 0x010603f50d8000000feb3017060355040a1310476c6f62616c5369676e206e762d7361 3110300e060355040b1307526f6f74204341311b301906035504031312476c6f62616c53 69676e20526f6f7420434130820122300d06092a864886f70d01010105000382010f0030 82010a0282010100da0ee6998dcea3e34f8a7efbf18b83256bea481ff12ab0b9951104bd f063d1e26766cf1cddcf1b482bee8d898e9aaf298065abe9c72d12cbab1c4c7007a13d0a 30cd158d4ff8ddd48c50151cef50eec42ef7fce952f2917de06dd535308e5e4373f241e9 d56ae3b2893a5639386f063c88695b2a4dc5a754b86c89cc9bf93ccae5fd89f5123c9278 96d6 EAP-Message = 0xdc746e934461d18dc746b2750e86e8198ad56d6cd5781695a2e9c80a38ebf224134f73 549313853a1bbc1e34b58b058cb9778bb1db1f2091ab09536e90ce7b3774b97047912251 631679aeb1ae412608c8192bd146aa48d6642ad78334ff2c2ac16c19434a0785e7d37cf6 2168efeaf2529f7f9390cf0203010001a3423040300e0603551d0f0101ff040403020006 301d0603551d0e04160414607b661a450d97ca89502f7d04cd34a8fffcfd4b300f060355 1d130101ff040530030101ff300d06092a864886f70d01010405000382010100aeaa9ffc b7d2cb1f5f392928189e34c96c4f6f1af064a2704a4f13869b60289ee88149987d0abbe5 b09d EAP-Message = 0x3d36db8f0551ff09312a1fdd89779e0f2e6c9504ed86cbb4003f84024d806a2a2d780b ae6f2ba28344831fcd50824c24afbdf7a5b4c85a0ff4e7475e498e3796fe9a88053ad9c0 db2987e6199647a73aa68c8b3c77fe4663a753da21d1ac7e49a24be6c367592fb38a0ebb 2cbda9aa427c35c1d87fd5a7313a4e634339af08b061348cd398a94334f60f87293b9dc2 56589877c3f71bacf69df83eaaa75445f0f5f9d53165fe6b589c71b31ed752ea3217fc40 601dc97924b2f66cfda8660e82dd98cbdac2444f2ea07bf2f76b2c761184468a78a3e316 030101200d000118020102011300593057310b3009060355040613024245311930170603 5504 EAP-Message = 0x0a1310476c6f62616c5369676e206e762d73613110300e060355040b1307526f6f7420 4341311b301906035504031312476c6f62616c5369676e20526f6f742043410061305f31 0b300906035504061302424531193017060355040a1310476c6f62616c5369676e206e76 2d736131143012060355040b130b506172746e657273204341311f301d06035504031316 476c6f62616c5369676e20506172746e65727320434100533051310b3009060355040613 025553310c300a060355040a130342414831133011060355040b130a436f6d706f6e656e 7473311f301d06035504031316426f6f7a20416c6c656e2048616d696c746f6e2043410e 0000 EAP-Message = 0x00 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0477eccc80a92cbf72f5506fc4ee9b1c Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=239, length=1568 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0x53b9f83d6cc16419c6224624ac4de2b1 EAP-Message = 0x020605740dc00000133316030111e90b0011e50011e20003813082037d30820265a003 02010202020677300d06092a864886f70d01010505003051310b30090603550406130255 53310c300a060355040a130342414831133011060355040b130a436f6d706f6e656e7473 311f301d06035504031316426f6f7a20416c6c656e2048616d696c746f6e204341301e17 0d3034313032373135333930335a170d3037303432383135333930335a3041310b300906 0355040613025553310c300a060355040a1303424148310d300b060355040b1304534d54 50311530130603550403130c4d696c6c657220427265747430819f300d06092a864886f7 0d01 EAP-Message = 0x0101050003818d0030818902818100a62c7c43b2d94dad861452e68696ad85023c51b4 13d88336a4dfdf1fd90a9595364e34cee5dfbaf22aa41e8e34d6497568f8ecaa96e15002 c9530a629c1c055d0257c966e595d77f7105e2d7ff433bd55703e9a0e019356ff97197aa 4533ae02ba75ed75319b6c3d24f00c07f91a468304be239f805c5be91e2e5174575ea675 0203010001a381f23081ef300e0603551d0f0101ff0404030205a0301d0603551d0e0416 0414d8970d09ac4f248d2e1e3be99e1e01a1d06898c630180603551d200411300f300d06 0b2b06010401de000103020130620603551d1f045b30593057a055a05386516c6461703a 2f2f EAP-Message = 0x64697273796e632e757361652e6261682e636f6d2f636e3d426f6f7a20416c6c656e20 48616d696c746f6e2043412c206f753d436f6d706f6e656e74732c206f3d4241482c2063 3d5553301f0603551d110418301681146d696c6c65725f6272657474406261682e636f6d 301f0603551d23041830168014e07d84c5bcb46553f2a25d9b8038d06c1c9e9dc2300d06 092a864886f70d0101050500038201010096f0549f1df98da23093540aad54b67688a278 ff21dfa688f435e4e1426cd14262c6fbee9c31fb24336dfe230b059304e5ecce10abafe9 f7ee519f87c88478eadb084e46f97ec55b0f2fde80ffdaccde55f8839fba0ba53efe741a facf EAP-Message = 0xe391f807b55e57f0e515d7d4cd65ad01d0d87141d33d1a53e537f30d7039fea885ccff f917ed31a3274a0bbed61e3fd0c048cb83a577d5cd73240f2e2f7622d0760b66b4b01da2 3fb9ec36126fab6a50dab982dacbd8f1c2d6bee6aa1ab21003df66ca96751077b438d2d7 48dfe32581a98fb73ef48c56155295a9134a6b220c3682c015839c4c9a86c4a6f28527f1 8b33166ca40ddb407f1d10976536511132d9f90a0003813082037d30820265a003020102 02020677300d06092a864886f70d01010505003051310b3009060355040613025553310c 300a060355040a130342414831133011060355040b130a436f6d706f6e656e7473311f30 1d06 EAP-Message = 0x035504031316426f6f7a20416c6c656e2048616d696c746f6e204341301e170d303431 3032373135333930335a170d3037303432383135333930335a3041310b30090603550406 13025553310c300a060355040a1303424148310d300b060355040b1304534d5450311530 130603550403130c4d696c6c657220427265747430819f300d06092a864886f70d010101 050003818d0030818902818100a62c7c43b2d94dad861452e68696ad85023c51b413d883 36a4dfdf1fd90a9595364e34cee5dfbaf22aa41e8e34d6497568f8ecaa96e15002c9530a 629c1c055d0257c966e595d77f7105e2d7ff433bd55703e9a0e019356ff97197aa4533ae 02ba EAP-Message = 0x75ed75319b6c3d24f00c07f91a468304be239f805c5be91e2e5174575ea67502030100 01a381f23081ef300e0603551d0f0101ff0404030205a0301d0603551d0e04160414d897 0d09ac4f248d2e1e3be99e1e01a1d06898c630180603551d200411300f300d060b2b0601 0401de000103020130620603551d1f045b30593057a055a0 NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0x0477eccc80a92cbf72f5506fc4ee9b1c NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 6 length 253 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS First Fragment of the message eaptls_verify returned 9 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 Sending Access-Challenge of id 239 to 10.120.0.3:1645 EAP-Message = 0x010700060d00 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd03f828df209da2e3a25fb8e1ec68974 Finished request 5 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=240, length=1568 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0x8ef630c7ab60b669d245a8921f079104 EAP-Message = 0x020705740d405386516c6461703a2f2f64697273796e632e757361652e6261682e636f 6d2f636e3d426f6f7a20416c6c656e2048616d696c746f6e2043412c206f753d436f6d70 6f6e656e74732c206f3d4241482c20633d5553301f0603551d110418301681146d696c6c 65725f6272657474406261682e636f6d301f0603551d23041830168014e07d84c5bcb465 53f2a25d9b8038d06c1c9e9dc2300d06092a864886f70d0101050500038201010096f054 9f1df98da23093540aad54b67688a278ff21dfa688f435e4e1426cd14262c6fbee9c31fb 24336dfe230b059304e5ecce10abafe9f7ee519f87c88478eadb084e46f97ec55b0f2fde 80ff EAP-Message = 0xdaccde55f8839fba0ba53efe741afacfe391f807b55e57f0e515d7d4cd65ad01d0d871 41d33d1a53e537f30d7039fea885ccfff917ed31a3274a0bbed61e3fd0c048cb83a577d5 cd73240f2e2f7622d0760b66b4b01da23fb9ec36126fab6a50dab982dacbd8f1c2d6bee6 aa1ab21003df66ca96751077b438d2d748dfe32581a98fb73ef48c56155295a9134a6b22 0c3682c015839c4c9a86c4a6f28527f18b33166ca40ddb407f1d10976536511132d9f90a 0003b6308203b23082029aa003020102020b030000000000ec99bcff6e300d06092a8648 86f70d0101050500305f310b300906035504061302424531193017060355040a1310476c 6f62 EAP-Message = 0x616c5369676e206e762d736131143012060355040b130b506172746e65727320434131 1f301d06035504031316476c6f62616c5369676e20506172746e657273204341301e170d 3032303331353131323632325a170d3038313233313132303030305a3051310b30090603 55040613025553310c300a060355040a130342414831133011060355040b130a436f6d70 6f6e656e7473311f301d06035504031316426f6f7a20416c6c656e2048616d696c746f6e 20434130820122300d06092a864886f70d01010105000382010f003082010a0282010100 b0077e0646fcb615f357a5e0dfe0d5b052a32d1c5bed5297e005f4fc73e7ef6c3d1f64eb 88b2 EAP-Message = 0x0dcd1ac33bddc928d0618616452c27a56493594cf3cad054765d444cd1527f1a0b78f7 cc34315e5456770a66ecfdbbbe6855adb479c3fedbdf721731bd863449c8619d217f6ce2 c6ee303e8f1f50dd1e9bee6f192bdcc2f862774560f19c8a0db78ffe4c0c039e164276c2 d8592fcc274cf832431410d983550ce4894b1e9c6d93581ee5018f95a220f39b53cff9e4 1f9f801373e63201085ea7025a289b03ab757927b6a158e58f21b0600006f54778f13158 b02636574d1c94d0f48333e6995681ef4afca76b65d93a7a13b3eeefae3634db2d2f98e5 4eeb990203010001a37d307b300e0603551d0f0101ff040403020186300f0603551d1301 01ff EAP-Message = 0x040530030101ff30180603551d200411300f300d060b2b06010401de0001030201301d 0603551d0e04160414e07d84c5bcb46553f2a25d9b8038d06c1c9e9dc2301f0603551d23 04183016801443248d70150862559c4f0c40175d865e0fa24cfb300d06092a864886f70d 0101050500038201010026de75dbe1c1aaf83bf2eca52de9d8bf7b91a59a3c24d194e353 ff9873d2f7a722aef0ed3e7a527d2d33e853644dc34c70dd652575f30c2c624676c0efc4 a84a2847e0c8c464fbbf4514ef408c7f0a2b2ca33321a015b4b50b4f4a5a1823cae2f1e1 0007d0ffc5a03d449cc4ec06c3f9f4267d49a3b6af61a4ad2e097c2b435463f0bc2b87ae bb22 EAP-Message = 0xe21e0e6a4f6e600d37c32acce5ce7050a0427abe9d99bb03c6eadf9d57ca71839218a4 0355f0e21a6b75ec595ec7c3b21001169f45ef082640074a8058c60cf2f8ff5371f92c31 6eb9c064d6c65a7275df55ff3182ed2bf47a27889e3c84ab1c40a85712f35c23d486b7c9 d8291758c3d3fbab8829dcdd880003a23082039e30820286 NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0xd03f828df209da2e3a25fb8e1ec68974 NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 7 length 253 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 6 modcall: group authorize returns updated for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: More fragments to follow eaptls_verify returned 10 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 6 modcall: group authenticate returns handled for request 6 Sending Access-Challenge of id 240 to 10.120.0.3:1645 EAP-Message = 0x010800060d00 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcc2d10811ab9b5cb0aa0d64b62cc1143 Finished request 6 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=241, length=1568 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0x21271ead112a6ce16ac592ab0302be17 EAP-Message = 0x020805740d40a003020102020b020000000000d678b9d1af300d06092a864886f70d01 010405003057310b300906035504061302424531193017060355040a1310476c6f62616c 5369676e206e762d73613110300e060355040b1307526f6f74204341311b301906035504 031312476c6f62616c5369676e20526f6f74204341301e170d3939303132383132303030 305a170d3039303132383132303030305a305f310b300906035504061302424531193017 060355040a1310476c6f62616c5369676e206e762d736131143012060355040b130b5061 72746e657273204341311f301d06035504031316476c6f62616c5369676e20506172746e 6572 EAP-Message = 0x7320434130820122300d06092a864886f70d01010105000382010f003082010a028201 0100d22cf832ac4a127a37c82991a5ae8c6e1e0ec0343388e53371161c788468c3183450 2e163eb194824fb19a9f00f8c61135c6697b9802ad0006886ce74c3328008827461f87b3 717563bc32bb88de66180e500693b4f6bc1437303d22df3dff757ed90a1ac59fb3fcd0ac b3087a89d301e8005ce74a0b3d4d7b26a2b762068bda46dd93173f3f5b024b0bb6882011 9200adbbc72ed4e345aef5895a7c8da4ad856432c0278cc6f28a8092862456598d7468a2 8342b39e3d5041866f206ef6fdced319e332cc8fed9a5e6d1f28f552ac6e185ef83dd192 e5ba EAP-Message = 0x6c01884b0af22dde65330542a04caa3176befdbf8178f9711c465e2d15952d30598e4c 41d162ab3d0203010001a3633061300e0603551d0f0101ff040403020006301d0603551d 0e0416041443248d70150862559c4f0c40175d865e0fa24cfb301f0603551d2304183016 8014607b661a450d97ca89502f7d04cd34a8fffcfd4b300f0603551d130101ff04053003 0101ff300d06092a864886f70d0101040500038201010066edb488691199822183aca16d 8b9b84ad0f2dc81e8cca7b7eadaad48ede07d69e45c7a5b89c07396025551ac04f19e5cf 17294989183566e5eb28404e57c9afb3e4b82005a33b9550914994297d2ce58841a54588 5e9d EAP-Message = 0x8227f7d2ef5bb54f9fbefe35652c55649fe151da226177ba584e8fc67959596e3080a2 4f906e210badd0683990109bed22656f1e1138e67f8cd2f3396d47d521e8ea753a41d1ad f6169d5d0b21bdf31f6306251dc11f35712ceb2019d5c1b0ec3de56fed02073f137b6692 d644c198f75f508b7a5bc26f6db0d1f8e574a04037a3250fe43dca643193905c307bb939 319a5e4ccdb9414f50e43d38aec866d9c73b5d5147ac9babf2ad00037930820375308202 5da003020102020b020000000000d678b79405300d06092a864886f70d01010405003057 310b300906035504061302424531193017060355040a1310476c6f62616c5369676e206e 762d EAP-Message = 0x73613110300e060355040b1307526f6f74204341311b301906035504031312476c6f62 616c5369676e20526f6f74204341301e170d3938303930313132303030305a170d313430 3132383132303030305a3057310b300906035504061302424531193017060355040a1310 476c6f62616c5369676e206e762d73613110300e060355040b1307526f6f74204341311b 301906035504031312476c6f62616c5369676e20526f6f7420434130820122300d06092a 864886f70d01010105000382010f003082010a0282010100da0ee6998dcea3e34f8a7efb f18b83256bea481ff12ab0b9951104bdf063d1e26766cf1cddcf1b482bee8d898e9aaf29 8065 EAP-Message = 0xabe9c72d12cbab1c4c7007a13d0a30cd158d4ff8ddd48c50151cef50eec42ef7fce952 f2917de06dd535308e5e4373f241e9d56ae3b2893a5639386f063c88695b2a4dc5a754b8 6c89cc9bf93ccae5fd89f5123c927896d6dc746e934461d18dc746b2750e86e8198ad56d 6cd5781695a2e9c80a38ebf224134f73549313853a1bbc1e NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0xcc2d10811ab9b5cb0aa0d64b62cc1143 NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 8 length 253 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 7 modcall: group authorize returns updated for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: More fragments to follow eaptls_verify returned 10 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 7 modcall: group authenticate returns handled for request 7 Sending Access-Challenge of id 241 to 10.120.0.3:1645 EAP-Message = 0x010900060d00 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8205233ea53e1eeb037578d078c3480d Finished request 7 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=242, length=921 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0x3f0cb9d0ffeee33f90c0c0a26e7ba5cd EAP-Message = 0x020902f30d0034b58b058cb9778bb1db1f2091ab09536e90ce7b3774b9704791225163 1679aeb1ae412608c8192bd146aa48d6642ad78334ff2c2ac16c19434a0785e7d37cf621 68efeaf2529f7f9390cf0203010001a3423040300e0603551d0f0101ff04040302000630 1d0603551d0e04160414607b661a450d97ca89502f7d04cd34a8fffcfd4b300f0603551d 130101ff040530030101ff300d06092a864886f70d01010405000382010100aeaa9ffcb7 d2cb1f5f392928189e34c96c4f6f1af064a2704a4f13869b60289ee88149987d0abbe5b0 9d3d36db8f0551ff09312a1fdd89779e0f2e6c9504ed86cbb4003f84024d806a2a2d780b ae6f EAP-Message = 0x2ba28344831fcd50824c24afbdf7a5b4c85a0ff4e7475e498e3796fe9a88053ad9c0db 2987e6199647a73aa68c8b3c77fe4663a753da21d1ac7e49a24be6c367592fb38a0ebb2c bda9aa427c35c1d87fd5a7313a4e634339af08b061348cd398a94334f60f87293b9dc256 589877c3f71bacf69df83eaaa75445f0f5f9d53165fe6b589c71b31ed752ea3217fc4060 1dc97924b2f66cfda8660e82dd98cbdac2444f2ea07bf2f76b2c761184468a78a3e31603 010086100000820080b06b113eabb56159920da7646417fbb384ca4564d9632ab74c09d0 9931a0192e151ad2c24a0f40f6f526d23c18d4dc9571a2e5f160accdd39eb4521f2d005a acfe EAP-Message = 0xc2b7f6cd192b36134a07cc238798bb5a1b204c2159b15e5e3147ec683e9d2d1c56de88 d79a0f70748be6277c044f54b3ca5ec038031b7911b2651c8b68c1cd16030100860f0000 820080811ba133a8ae472b546ca68e5861dc0d0a4a8e7504fa656cde3473dd287352aa37 2d5beac6f05358bc1be8d3e5ad59d7c7d970f4c3c60767c3ba23451718c7bc1e8c3fa16f 49371864b67c864ac377d7a081383607b885120e78a1a287c0cca33406c7a0a5efb6634d 9e79655329e0db9f19e37e145a3559b66ead4e9309a2701403010001011603010024bbff e5d0cf60ada4526f73b3e7df033db63cccc965186b2da150467f8b19b1136f46a883 NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0x8205233ea53e1eeb037578d078c3480d NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 modcall[authorize]: module "chap" returns noop for request 8 modcall[authorize]: module "mschap" returns noop for request 8 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 8 rlm_eap: EAP packet type response id 9 length 253 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 8 modcall: group authorize returns updated for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake rlm_eap_tls: <<< TLS 1.0 Handshake [length 11e9], Certificate chain-depth=3, error=0 --> User-Name = miller_brett(a)bah.com --> BUF-Name = GlobalSign Root CA --> subject = /C=BE/O=GlobalSign nv-sa/OU=Root CA/CN=GlobalSign Root CA --> issuer = /C=BE/O=GlobalSign nv-sa/OU=Root CA/CN=GlobalSign Root CA --> verify return:1 chain-depth=2, error=0 --> User-Name = miller_brett(a)bah.com --> BUF-Name = GlobalSign Partners CA --> subject = /C=BE/O=GlobalSign nv-sa/OU=Partners CA/CN=GlobalSign Partners CA --> issuer = /C=BE/O=GlobalSign nv-sa/OU=Root CA/CN=GlobalSign Root CA --> verify return:1 chain-depth=1, error=0 --> User-Name = miller_brett(a)bah.com --> BUF-Name = Booz Allen Hamilton CA --> subject = /C=US/O=BAH/OU=Components/CN=Booz Allen Hamilton CA --> issuer = /C=BE/O=GlobalSign nv-sa/OU=Partners CA/CN=GlobalSign Partners CA --> verify return:1 radius_xlat: 'miller_brett(a)bah.com' rlm_eap_tls: checking certificate CN (Miller Brett) with xlat'ed value (miller_brett(a)bah.com) rlm_eap_tls: Certificate CN (Miller Brett) does not match specified value (miller_brett(a)bah.com) chain-depth=0, error=0 --> User-Name = miller_brett(a)bah.com --> BUF-Name = Miller Brett --> subject = /C=US/O=BAH/OU=SMTP/CN=Miller Brett --> issuer = /C=US/O=BAH/OU=Components/CN=Booz Allen Hamilton CA --> verify return:0 rlm_eap_tls: >>> TLS 1.0 Alert [length 0002], fatal certificate_unknown TLS Alert write:fatal:certificate unknown TLS_accept:error in SSLv3 read client certificate B rlm_eap_tls: SSL_read failed in a system call (-1), TLS session fails. In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 8 modcall: group authenticate returns handled for request 8 Sending Access-Challenge of id 242 to 10.120.0.3:1645 EAP-Message = 0x010a00110d80000000071503010002022e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x54f7626909823ef4412c6f44d40fb505 Finished request 8 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.120.0.3:1645, id=243, length=199 User-Name = "miller_brett(a)bah.com" Framed-MTU = 1400 Called-Station-Id = "000f.23d8.a391" Calling-Station-Id = "000a.95f3.1c2a" Service-Type = Login-User Message-Authenticator = 0xa93097f74b6d8e6f36bbb1a01d28de62 EAP-Message = 0x020a00250d800000001b1503010016f161a3efe92d8c4f70d10582602ae3454a48b64c d98a NAS-Port-Type = Wireless-802.11 NAS-Port = 738 State = 0x54f7626909823ef4412c6f44d40fb505 NAS-IP-Address = 10.120.0.3 NAS-Identifier = "asq2-1st-Floor-110" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 9 modcall[authorize]: module "preprocess" returns ok for request 9 modcall[authorize]: module "chap" returns noop for request 9 modcall[authorize]: module "mschap" returns noop for request 9 rlm_realm: Looking up realm "bah.com" for User-Name = "miller_brett(a)bah.com" rlm_realm: No such realm "bah.com" modcall[authorize]: module "suffix" returns noop for request 9 rlm_eap: EAP packet type response id 10 length 37 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 9 users: Matched entry DEFAULT at line 163 modcall[authorize]: module "files" returns ok for request 9 modcall: group authorize returns updated for request 9 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 9 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 11e9], Certificate chain-depth=3, error=0 Segfaults here ..... EAP.conf # # Whatever you do, do NOT set 'Auth-Type := EAP'. The server # is smart enough to figure this out on its own. The most # common side effect of setting 'Auth-Type := EAP' is that the # users then cannot use ANY other authentication method. # # $Id: eap.conf,v 1.4 2004/04/15 18:34:41 aland Exp $ # eap { # Invoke the default supported EAP type when # EAP-Identity response is received. # # The incoming EAP messages DO NOT specify which EAP # type they will be using, so it MUST be set here. # # For now, only one default EAP type may be used at a time. # # If the EAP-Type attribute is set by another module, # then that EAP type takes precedence over the # default type configured here. # default_eap_type = tls # A list is maintained to correlate EAP-Response # packets with EAP-Request packets. After a # configurable length of time, entries in the list # expire, and are deleted. # timer_expire = 60 # There are many EAP types, but the server has support # for only a limited subset. If the server receives # a request for an EAP type it does not support, then # it normally rejects the request. By setting this # configuration to "yes", you can tell the server to # instead keep processing the request. Another module # MUST then be configured to proxy the request to # another RADIUS server which supports that EAP type. # # If another module is NOT configured to handle the # request, then the request will still end up being # rejected. ignore_unknown_eap_types = no # Cisco AP1230B firmware 12.2(13)JA1 has a bug. When given # a User-Name attribute in an Access-Accept, it copies one # more byte than it should. # # We can work around it by configurably adding an extra # zero byte. cisco_accounting_username_bug = no # Supported EAP-types # # We do NOT recommend using EAP-MD5 authentication # for wireless connections. It is insecure, and does # not provide for dynamic WEP keys. # md5 { } # Cisco LEAP # # We do not recommend using LEAP in new deployments. See: # http://www.securiteam.com/tools/5TP012ACKE.html # # Cisco LEAP uses the MS-CHAP algorithm (but not # the MS-CHAP attributes) to perform it's authentication. # # As a result, LEAP *requires* access to the plain-text # User-Password, or the NT-Password attributes. # 'System' authentication is impossible with LEAP. # leap { } # Generic Token Card. # # Currently, this is only permitted inside of EAP-TTLS, # or EAP-PEAP. The module "challenges" the user with # text, and the response from the user is taken to be # the User-Password. # # Proxying the tunneled EAP-GTC session is a bad idea, # the users password will go over the wire in plain-text, # for anyone to see. # gtc { # The default challenge, which many clients # ignore.. #challenge = "Password: " # The plain-text response which comes back # is put into a User-Password attribute, # and passed to another module for # authentication. This allows the EAP-GTC # response to be checked against plain-text, # or crypt'd passwords. # # If you say "Local" instead of "PAP", then # the module will look for a User-Password # configured for the request, and do the # authentication itself. # auth_type = PAP } ## EAP-TLS # # To generate ctest certificates, run the script # # ../scripts/certs.sh # # The documents on http://www.freeradius.org/doc # are old, but may be helpful. # # See also: # # http://www.dslreports.com/forum/remark,9286052~mode=flat # tls { #private_key_password = whatever private_key_file = ${raddbdir}/certs/wirelesslan.bah.com.key #private_key_file = ${raddbdir}/certs/cert-srv.pem # If Private key & Certificate are located in # the same file, then private_key_file & # certificate_file must contain the same file # name. certificate_file = ${raddbdir}/certs/wirelesslan.bah.com.pub #certificate_file = ${raddbdir}/certs/cert-srv.pem # Trusted Root CA list CA_file = ${raddbdir}/certs/certs.cer #CA_file = ${raddbdir}/certs/cacert.pem dh_file = ${raddbdir}/certs/dh random_file = ${raddbdir}/certs/random # # This can never exceed the size of a RADIUS # packet (4096 bytes), and is preferably half # that, to accomodate other attributes in # RADIUS packet. On most APs the MAX packet # length is configured between 1500 - 1600 # In these cases, fragment size should be # 1024 or less. # fragment_size = 1024 # include_length is a flag which is # by default set to yes If set to # yes, Total Length of the message is # included in EVERY packet we send. # If set to no, Total Length of the # message is included ONLY in the # First packet of a fragment series. # #include_length = yes # Check the Certificate Revocation List # # 1) Copy CA certificates and CRLs to same directory. # 2) Execute 'c_rehash <CA certs&CRLs Directory>'. # 'c_rehash' is OpenSSL's command. # 3) Add 'CA_path=<CA certs&CRLs directory>' # to radiusd.conf's tls section. # 4) uncomment the line below. # 5) Restart radiusd check_crl = no CA_path=/etc/freeradius3/certs # # If check_cert_cn is set, the value will # be xlat'ed and checked against the CN # in the client certificate. If the values # do not match, the certificate verification # will fail rejecting the user. # check_cert_cn = %{User-Name} } # The TTLS module implements the EAP-TTLS protocol, # which can be described as EAP inside of Diameter, # inside of TLS, inside of EAP, inside of RADIUS... # # Surprisingly, it works quite well. # # The TTLS module needs the TLS module to be installed # and configured, in order to use the TLS tunnel # inside of the EAP packet. You will still need to # configure the TLS module, even if you do not want # to deploy EAP-TLS in your network. Users will not # be able to request EAP-TLS, as it requires them to # have a client certificate. EAP-TTLS does not # require a client certificate. # #ttls { # The tunneled EAP session needs a default # EAP type which is separate from the one for # the non-tunneled EAP module. Inside of the # TTLS tunnel, we recommend using EAP-MD5. # If the request does not contain an EAP # conversation, then this configuration entry # is ignored. # default_eap_type = md5 # The tunneled authentication request does # not usually contain useful attributes # like 'Calling-Station-Id', etc. These # attributes are outside of the tunnel, # and normally unavailable to the tunneled # authentication request. # # By setting this configuration entry to # 'yes', any attribute which NOT in the # tunneled authentication request, but # which IS available outside of the tunnel, # is copied to the tunneled request. # # allowed values: {no, yes} # copy_request_to_tunnel = no # The reply attributes sent to the NAS are # usually based on the name of the user # 'outside' of the tunnel (usually # 'anonymous'). If you want to send the # reply attributes based on the user name # inside of the tunnel, then set this # configuration entry to 'yes', and the reply # to the NAS will be taken from the reply to # the tunneled request. # # allowed values: {no, yes} # use_tunneled_reply = no #} # # The tunneled EAP session needs a default EAP type # which is separate from the one for the non-tunneled # EAP module. Inside of the TLS/PEAP tunnel, we # recommend using EAP-MS-CHAPv2. # # The PEAP module needs the TLS module to be installed # and configured, in order to use the TLS tunnel # inside of the EAP packet. You will still need to # configure the TLS module, even if you do not want # to deploy EAP-TLS in your network. Users will not # be able to request EAP-TLS, as it requires them to # have a client certificate. EAP-PEAP does not # require a client certificate. # peap { # The tunneled EAP session needs a default # EAP type which is separate from the one for # the non-tunneled EAP module. Inside of the # PEAP tunnel, we recommend using MS-CHAPv2, # as that is the default type supported by # Windows clients. #default_eap_type = mschapv2 default_eap_type = tls } # # This takes no configuration. # # Note that it is the EAP MS-CHAPv2 sub-module, not # the main 'mschap' module. # # Note also that in order for this sub-module to work, # the main 'mschap' module MUST ALSO be configured. # # This module is the *Microsoft* implementation of MS-CHAPv2 # in EAP. There is another (incompatible) implementation # of MS-CHAPv2 in EAP by Cisco, which FreeRADIUS does not # currently support. # mschapv2 { } }

1 0

RE: RADIUS Accounting
by David Roze 09 Dec '05

09 Dec '05

It should be sent everytime they connect/disconnect. Don't think you can change it David -----Original Message----- From: freeradius-users-bounces(a)lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] On Behalf Of Bernell Williams Sent: 09 December 2005 04:16 To: FreeRadius users mailing list Subject: Re: RADIUS Accounting Madhuraka Godahewa wrote: > Hi All, > > I have installed freeRADIUS 1.0.5 recently and configured it. It works > perfectly for authenticating users connecting through WLAN AP. I have a little > problem with RADIUS accounting. > > I understand that the accounting requests should be sent by the NAS to the > RADIUS server. My problem is how can we set the frequency of sending these > accounting requests. That is how often the NAS will send accounting requests to > the RADIUS server? Can we configure that setting (frequency of sending the > accounting requests) through freeRADIUS conf files or do we need to configure > it throough the configuration interface of the NAS? > > > Thanking You., > > > > ------------------------------------------------------------------------ -------- > Madhuraka Godahewa > Telecommunications Engineer > Research and Development Unit > Electroteks Global Networks (Pvt.) Ltd. > > Mobile: + 94-777-647055 > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html I use freeradius & MySQL. I am able to set frequency of acct update by setting attribute Acct-Interim-Interval in rad[group]reply table to number of seconds between updates. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Free Radius compatible with Oracle 9.2.0.7?
by Sharma Raj 09 Dec '05

09 Dec '05

Hi, I'm running freeradius1.0.2 and the database is Oracle 9.2.0.3. Planning to upgrade to Oracle 9.2.0.7. Are there any compatibility issues with this, or are these two completely compatible with each other? Appreciate the advice in advance. Rog

1 0

RADIUS Accounting
by Madhuraka Godahewa 09 Dec '05

09 Dec '05

Hi All, I have installed freeRADIUS 1.0.5 recently and configured it. It works perfectly for authenticating users connecting through WLAN AP. I have a little problem with RADIUS accounting. I understand that the accounting requests should be sent by the NAS to the RADIUS server. My problem is how can we set the frequency of sending these accounting requests. That is how often the NAS will send accounting requests to the RADIUS server? Can we configure that setting (frequency of sending the accounting requests) through freeRADIUS conf files or do we need to configure it throough the configuration interface of the NAS? Thanking You., -------------------------------------------------------------------------------- Madhuraka Godahewa Telecommunications Engineer Research and Development Unit Electroteks Global Networks (Pvt.) Ltd. Mobile: + 94-777-647055

2 1

possible radtest parameter issue
by Laker Netman 08 Dec '05

08 Dec '05

I am trying to use radtest to check some changes I'm making in my FR "users" file. My goal is to be able to let visitors use our wifi network for Internet access by authorizing them against a generic user/password combo in "users" like "guest" & "wireless", while everyone in the company, who is actually connecting to resources on our LAN, authorize/authenticate against our Active Directory (which is already working). I read the radtest man file and Googled for some examples, so I think my syntax is accurate. Am I correct that radtest, by use of the optional "nasname", can make FR behave as if the Access-Requests are coming from a different NAS than the host upon which it is being run? Either way the results are not what I anticipated. When I run the following from a terminal on my FR box: radtest test test radserver.my.domain 10 secret ap.my.domain I get this reply: Sending Access-Request of id 191 to 192.168.12.210:1812 User-Name = "test" User-Password = "test" NAS-IP-Address = RADSERVER NAS-Port = 10 Framed-Protocol = PPP I didn't think the Framed-Protocol attribute should appear unless the optional value following "secret" was an integer > 0. This looks to me like the "ap.my.domain" is being taken as [ppphint] rather than [nasname]. This seems incorrect to me since ppphint and nasname are both listed as optional, which I concluded means exclusive of one another. Is that right? I expanded my tests. Adding a zero after "secret" (radtest test test radserver.my.domain 10 secret 0 ap.my.domain) produced the following: Sending Access-Request of id 105 to 192.168.12.210:1812 User-Name = "test" User-Password = "test" NAS-IP-Address = ap.my.domain NAS-Port = 10 Framed-Protocol = PPP So now the NAS-IP-Address attribute is populated, but the Framed-Protocol attribute is still appearing, even though I explicitly placed a zero at the ppphint parameter position. And it's a hostname in NAS-IP-Address, rather than an IP address :) Neither seems right. Is there a common misconfiguration I could look for elsewhere? Here is the last thing that happened I'm not sure about: Sending Access-Request of id 105 to 192.168.12.210:1812 User-Name = "test" User-Password = "test" NAS-IP-Address = ap.my.domain NAS-Port = 10 Framed-Protocol = PPP Re-sending Access-Request of id 105 to 192.168.12.210:1812 User-Name = "test" User-Password = ")\346\216Axj\002\322\264\361\330-12Q\242" NAS-IP-Address = ap.my.domain NAS-Port = 10 Framed-Protocol = PPP Re-sending Access-Request of id 105 to 192.168.12.210:1812 User-Name = "test" User-Password = ")\346\216Axj\002\322\264\361\330-12Q\242" NAS-IP-Address = ap.my.domain NAS-Port = 10 Framed-Protocol = PPP Re-sending Access-Request of id 105 to 192.168.12.210:1812 User-Name = "test" User-Password = ")\346\216Axj\002\322\264\361\330-12Q\242" NAS-IP-Address = ap.my.domain NAS-Port = 10 Framed-Protocol = PPP The output from radiusd -X is always: Ignoring request from unknown client 192.168.12.210:32773 --- Walking the entire request list --- Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 192.168.12.210:32773, id=105, length=62 Ignoring request from unknown client 192.168.12.210:32773 --- Walking the entire request list --- Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 192.168.12.210:32773, id=105, length=62 Ignoring request from unknown client 192.168.12.210:32773 --- Walking the entire request list --- Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 192.168.12.210:32773, id=105, length=62 Ignoring request from unknown client 192.168.12.210:32773 What caused the User-Password field to change? Each time I rerun the command, the User-Password is munged differently, but stays munged the same way on subsequent resends until I break out of radtest, if that makes sense. Based on the debug output it doesn't look like FR acted on the request at all. I have NTRadPing and the test works as expected from my desktop (which is configured in clients.conf), but it's not ideal as it doesn't match what I'm really trying to test (access through a wifi AP) and I do not have the resources available to configure a standalone test machine outside of our AD/domain. Anyway, I'm curious what the purpose of nasname is. And now, I'm hoping someone can explain why I'm seeing the above results from radtest. BTW, I am running FR 1.0.5 (compiled from source) on Fedora Core 4. TIA, Laker __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1