September 2025 - Freeradius-Users - lists.freeradius.org

MongoDB and v4
by Alan DeKok 05 Mar '26

05 Mar '26

As we're working to finalize v4 (real soon now!) one question which came up is MongDB. The Mongo team is currently looking into creating a fully async API for Mongo. We would need to use this in v4 in order to increase scalability. If we don't have such an API, then the Mongo drivers would be significantly slower than other databases. Their forum as a poll available at: https://feedback.mongodb.com/forums/924286-drivers/suggestions/47080057-asy… If you're interested in using Mongo with FreeRADIUS please vote on that page for their async API. Alan DeKok.

5 7

EAP-TTLS/PAP failing: client NAKs and requests MSCHAPv2 inside inner-tunnel
by Arifia Hapsari 01 Oct '25

01 Oct '25

Hello, I am trying to configure FreeRADIUS for guest Wi-Fi authentication using *EAP-TTLS/PAP*. My backend is a custom REST API that validates the username and plain-text password. The Phase 1 TLS tunnel is established successfully, but the inner authentication (Phase 2) always fails. The debug log shows that my inner-tunnel server rejects the user. Here is the part of my debug log: (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) eap: Peer sent EAP Response (code 2) ID 1 length 6 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) } # authorize = updated (7) Found Auth-Type = EAP (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP NAK (3) (7) eap: Peer NAK'd asking for unsupported EAP type MSCHAPv2 (26), skipping... (7) eap: ERROR: No mutually acceptable types found (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user ... (7) eap_ttls: Got tunneled Access-Reject (7) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed My eap.conf is configured to use default_eap_type = "pap" inside the ttls section. *My questions are:* 1. Does the log line Peer NAK'd asking for unsupported EAP type MSCHAPv2 definitively mean that client requests MSCHAPv2 but the server is only configured to accept EAP-TTLS/PAP? 2. What is the recommended best practice to solve this for a guest network? Should I focus on forcing the client devices to use PAP, or is it more reliable to reconfigure my server and REST API to support MSCHAPv2 (by providing the NT-Password hash)? Thank you for your help

2 3

2 servers - frontend + backend: auth + attributes
by Andrei Katsuk 01 Oct '25

01 Oct '25

Hello! I want to implement next scheme (PAP protocol, FreeRADIUS 3.0.27): client sends request to frontend server , frontend server authenticates user , frontend server sends request to backend server, backend server authenticates user and adds attributes, frontend server returns extra attributes to client. It seems frontend server can proxy request after authorization, so the part with authentication on frontend server is missed. Is it possible to implement this approach? Regards Andrei

2 6

Option82 - question about sending sub-options
by Ľudovít Mikula 29 Sep '25

29 Sep '25

I have a question about sending Option82 - I am setting sub-options 1,2 and 9 in response to DISCOVER: update reply { &DHCP-Relay-Remote-Id := &request:DHCP-Relay-Remote-Id &DHCP-Relay-Circuit-Id := &request:DHCP-Relay-Circuit-Id &DHCP-Vendor-Specific-Information := &request:DHCP-Vendor-Specific-Information } and see it being set in the freeradius log: (1702) DHCP-Relay-Remote-Id := 0xacdb489f87af (1702) DHCP-Relay-Circuit-Id := 0xacdb489f87af (1702) DHCP-Vendor-Specific-Information := 0x0000118b060104010203010000061b34030a444d5a2d434f532d3032010e4554492d5250442d504f52542d300207756e69636173740e07000100000079000d040a666f07 and also in the packet capture of our OFFER packet: Agent-Information (82), length 8: Circuit-ID SubOption 1, length 6: M-,M-[HM-^_M-^GM-/ Agent-Information (82), length 8: Remote-ID SubOption 2, length 6: M-,M-[HM-^_M-^GM-/ Agent-Information (82), length 70: Unknown SubOption 9, length 68: 0x0000: 0000 118b 0601 0401 0203 0100 0006 1b34 0x0010: 030a 444d 5a2d 434f 532d 3032 010e 4554 0x0020: 492d 5250 442d 504f 5254 2d30 0207 756e 0x0030: 6963 6173 740e 0700 0100 0000 7900 0d04 0x0040: 0a66 6f07 END (255), length 0 it all looks ok to me. However the relay agent vendor requires the sub-options to be set in one Option 82 block (like they send it to us in DISCOVER): Agent-Information (82), length 86: Circuit-ID SubOption 1, length 6: M-,M-[HM-^_M-^GM-/ Remote-ID SubOption 2, length 6: M-,M-[HM-^_M-^GM-/ Unknown SubOption 9, length 68: 0x0000: 0000 118b 0601 0401 0203 0100 0006 1b34 0x0010: 030a 444d 5a2d 434f 532d 3032 010e 4554 0x0020: 492d 5250 442d 504f 5254 2d30 0207 756e 0x0030: 6963 6173 740e 0700 0100 0000 7900 0d04 0x0040: 0a66 6f07 END (255), length 0 Is this possible (or am I doing something wrong), we're using freeradius v3.2.3 ? -- Ludo

4 13

rlm_python3 behavior with multi-worker threads
by Erdal Emlik 25 Sep '25

25 Sep '25

Hi FreeRADIUS team, I’m using FreeRADIUS (version 3.2.4) with rlm_python3 for authentication. I have the following question: - Does FreeRADIUS’ thread pool affect rlm_python3 requests? - Specifically, does each RADIUS worker call the same Python interpreter instance, or does each worker get its own Python context?( i mean 28 workers uses trying to use single instance at the same time right as doc says “item is GLOBAL TO THE SERVER. That is, you cannot have two instances of the python module”) Additionally, within the Python module, I log requests and sometimes see “queue full” messages. However, even when these messages appear, I observe that the Python module still returns a response to FreeRADIUS. Within Python, I perform some comparisons and assign IPs accordingly, and even if a "queue full" exception occurs, FreeRADIUS still receives the IP assignment and returns a response without any issue. - Is this “queue full” behavior related to the Python module itself, or is it due to FreeRADIUS threading/queue management? I hope i made it clear. Thanks for your guidance. Best regards Sent from my iPhone

2 4

help with freeradius on u24 for eduroam with ntlm auth
by Rob Taylor 23 Sep '25

23 Sep '25

Hi all. I'm in the process of trying to set up a freeradius instance for eduroam. I'm using ubuntu24 with the pre-built radius packages, 3.2.5+dfsg-3~ubuntu24.04.3 I'm following the guide from here: https://wiki.freeradius.org/guide/eduroam and I got the files based authentication to work, but I'm having an issue with the ntlm authentication. I've tested the samba part and that works, but when I try to auth to radius using ntlm, it gets rejected, and from what I can tell using tcpdump, it's not even hitting the ad servers, so something is wrong before it even gets to that point. I'm not sure if I have the radius config wrong, or if I'm doing something wrong with the eapol test. I have nltm_auth in both the inner-tunnel and default in sites-enabled in the authenticate section. I think this is where it goes wrong: (8) mschap: Found Cleartext-Password, hashing to create NT-Password (8) mschap: Creating challenge hash with username: rgt(a)wi.mit.edu (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) eap_mschapv2: [mschap] = reject Should it be stripping the domain here? It looks like it is doing that in other places in the config. can someone steer me in the right direction? Thanks. rgt

3 3

Clarification on proxy backend states (Zombie vs Dead) and possible packet loss
by Erdal Emlik 16 Sep '25

16 Sep '25

Hello FreeRADIUS team, We are running FreeRADIUS as a proxy setup, and we are trying to better understand how backend states (Alive, Zombie, Dead) behave in practice. In our current configuration: response_window = 5s (default is 20s) zombie_period = 20s (default is 40s) From what we observe: If a backend does not reply within response_window, the proxy marks it as Zombie. The backend remains Zombie until the zombie_period expires. If no valid responses are received during this time, it becomes Dead. If there are no Alive backends left, the proxy prefers sending to a Zombie backend instead of dropping requests. Periodic Status-Check packets can bring a Zombie backend back to Alive. 👉 My questions / doubts: In the Zombie state, we sometimes see packet loss (packets not reaching the backend). Is this the expected behavior, since the proxy still forwards traffic to a potentially unstable backend? When the documentation says “if the home servers are still down” in the context of robust-proxy-accounting, does “down” strictly mean Dead, or are Zombie servers also considered “down”? In our understanding, if a backend is in Zombie state, packets may still be sent but can get lost due to intermittent connectivity (before the backend ever becomes Dead). Is this correct? What would be the recommended approach to avoid accounting packet loss in such scenarios ( i know network must be stable but shit happens :(…)— should we rely on robust-proxy-accounting to queue locally until the backend is fully Alive again? Any clarification on this behavior would be very helpful. Thanks in advance,

2 2

SQL Custom - MySQL
by Rodrigo Prazim 12 Sep '25

12 Sep '25

Hello, I am attempting to create a query to retrieve the last piece of information from a REGEX: input_circuitid { if ("%{reply:Packet-Type}" == 'Access-Accept') { "%{sql:INSERT INTO ... CASE \ WHEN '%{string:ADSL-Agent-Circuit-Id}' \ REGEXP '^((25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[0-9]{1,2})\\.){3}(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[0-9]{1,2})/[0-9]+/[0-9]+/[A-Za-z0-9]+$' \ THEN SUBSTRING_INDEX('%{string:ADSL-Agent-Circuit-Id}', '/', -1) \ ELSE NULL \ END \ ) \ ON DUPLICATE KEY UPDATE \ ... sn = CASE \ WHEN '%{string:ADSL-Agent-Circuit-Id}' \ REGEXP '^((25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[0-9]{1,2})\\.){3}(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[0-9]{1,2})/[0-9]+/[0-9]+/[A-Za-z0-9]+$' \ THEN SUBSTRING_INDEX('%{string:ADSL-Agent-Circuit-Id}', '/', -1) \ ELSE sn \ END \ }" } } However, FreeRadius interprets the curly braces "}" as the end of the statement. REGEXP '^((25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[0-9]{1,2} Is there any way for FreeRadius to understand that this does not close the instruction? Sincerely, Rodrigo Prazim

2 1

attribute checking in the session REJECT
by Can Paçacı 11 Sep '25

11 Sep '25

Hi, In the authorize section, I check the username and password and print the relevant Reply-Message as in the followings. I works. authorize { .. sql{ notfound = 1 reject = 2 } if(notfound){ update reply { Reply-Message := "Please check your Username" } reject } if(reject){ update reply { Reply-Message := "%{reply:Reply-Message} Wrong Password" } reject } .. } Then, for those who reject, I check the NAS-Identifier in the "Post-Auth-Type REJECT" section. If the NAS-Identifier is incompatible according to the racheck table, I print a "wrong NAS" message. Ok so far. However, if the NAS-Identifier is not in the radcheck table, the NAS-Identifier should not check, if the password is incorrect, I want a "wrong password" error. I couldn't do this. Post-Auth-Type REJECT { .... if (&NAS-Identifier != "%{sql:SELECT value FROM radcheck WHERE Username = '%{User-Name}' and attribute='NAS-Identifier'}") { update reply { Reply-Message = "%{Reply-Message} Wrong NAS, NAS:%{NAS-Identifier}" } } update reply { Reply-Message = "%{reply:Reply-Message} Wrong Password." # Reply-Message := "Wrong Password.." } .. } Could you please help me how to fix it. Regards

2 4

Inquiry Regarding Backslash Handling in Reply-Message
by 平林哲 11 Sep '25

11 Sep '25

Hi! We have encountered an issue in FreeRADIUS version 3.2.8 where the backslash (`\`) character in the `Reply-Message` configured for a user is not correctly reflected in the response. --- **Configuration Details:** In `mods-available/ldap2`, the following directive is set: ``` valuepair_attribute = "radiusAttribute" ``` The LDAP entry for `uid=user003` includes the following attributes: ``` radiusAttribute: Reply-Message += 'mess\age' radiusAttribute: Reply-Message += 'mess\\age' radiusAttribute: Reply-Message += 'mess\\\age' radiusAttribute: Reply-Message += 'mess\\\\age' ``` --- **Observed Behavior:** When PAP authentication is performed using this configuration, the response consistently contains only a single backslash, regardless of the number of backslashes defined in LDAP: ``` Reply-Message = "mess\age" Reply-Message = "mess\age" Reply-Message = "mess\age" Reply-Message = "mess\age" ``` --- **Inquiry:** If backslashes (`\`) within the LDAP database value are escaped as shown below: ``` radiusAttribute: Reply-Message += 'mess\\age' radiusAttribute: Reply-Message += 'mess\\\\age' ``` Is it possible to modify the system so that the response reflects the intended number of backslashes, as follows? ``` Reply-Message = "mess\age" Reply-Message = "mess\\age" ``` Any guidance or suggestions regarding this behavior would be greatly appreciated. Best regards, Satoshi Hirabayashi ----- radiusd -X ----- FreeRADIUS Version 3.2.8 Copyright (C) 1999-2025 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT FreeRADIUS is developed, maintained, and supported by InkBridge Networks. For commercial support, please email sales(a)inkbridgenetworks.com https://inkbridgenetworks.com/ Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy_test.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/totp including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/ldap2 including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/mschap including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/rfc7542 including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 delay_proxy_rejects = no status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" allow_vulnerable_openssl = "no" } unlang { group_stop_return = no policy_stop_return = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server naeps93 { nonblock = no ipaddr = 192.168.1.93 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } home_server_pool naeps93_pool { type = fail-over home_server = naeps93 } realm soliton.co.jp { auth_pool = naeps93_pool } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = "no" secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost is short, and likely can be broken by an attacker. client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost_ipv6 is short, and likely can be broken by an attacker. client naeps245 { ipaddr = 192.168.1.245 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client naeps245 is short, and likely can be broken by an attacker. client naeps102 { ipaddr = 192.168.1.102 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client naeps102 is short, and likely can be broken by an attacker. Debugger not attached Configuration version: 9b08-cf8e-ba66-a123 # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_exec # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /aeouaaaceeeeiio?uuuayAEOUsAAACEEEEIIO?UUU?" } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" key = "%{%{Stripped-User-Name}:-%{User-Name}}" } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_detail # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_ldap # Loading module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap2 ldap { server = "192.168.1.123" port = 389 identity = "cn=admin,dc=rdd-osaka,dc=soliton,dc=corp" password = <<< secret >>> sasl { } valuepair_attribute = "radiusAttribute" user { scope = "sub" access_positive = yes sasl { } } group { scope = "sub" name_attribute = "cn" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { scope = "sub" base_dn = "" } profile { } options { ldap_debug = 0 net_timeout = 10 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 30 } tls { check_crl = no start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } instantiate { } # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = yes } # Instantiating module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap2 rlm_ldap: libldap vendor: OpenLDAP, version: 20457 rlm_ldap (ldap): Couldn't find configuration for accounting, will return NOOP for calls from this section rlm_ldap (ldap): Couldn't find configuration for post-auth, will return NOOP for calls from this section !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! libldap is using GnuTLS, while FreeRADIUS is using OpenSSL !! There may be random issues with TLS connections due to this conflict. !! The server may also crash. !! See https://wiki.freeradius.org/modules/Rlm_ldap for more information. !! !! Perhaps also see https://ltb-project.org/download.html !! Which may have a pre-build package of libldap which links to OpenSSL. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 5 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 max_retries = 5 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 10 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 9 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 8 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 7 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 6 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 47811 Listening on proxy address :: port 36791 Ready to process requests !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! BlastRADIUS check: Received packet without Message-Authenticator. Setting "require_message_authenticator = false" for client naeps245 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! UPGRADE THE CLIENT AS YOUR NETWORK IS VULNERABLE TO THE BLASTRADIUS ATTACK. Once the client is upgraded, set "require_message_authenticator = true" for client naeps245 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! BlastRADIUS check: Received packet without Proxy-State. Setting "limit_proxy_state = true" for client naeps245 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The packet does not contain Message-Authenticator, which is a security issue. UPGRADE THE CLIENT AS YOUR NETWORK MAY BE VULNERABLE TO THE BLASTRADIUS ATTACK. Once the client is upgraded, set "require_message_authenticator = true" for client naeps245 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (0) Received Access-Request Id 112 from 192.168.1.245:50341 to 192.168.1.123:1812 length 61 (0) User-Name = "user003" (0) User-Password = "S0l!@rch" (0) Calling-Station-Id = "112233445566" (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) { (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "user003", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}} (0) files: --> user003 (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{User-Name}) (0) ldap: --> (uid=user003) (0) ldap: Performing search in "ou=Users,dc=rdd-osaka,dc=soliton,dc=corp" with filter "(uid=user003)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "uid=user003,ou=Users,dc=rdd-osaka,dc=soliton,dc=corp" (0) ldap: Processing user attributes (0) ldap: Reply-Message += 'mess\\age' (0) ldap: Reply-Message += 'mess\\age' (0) ldap: Reply-Message += 'mess\\age' (0) ldap: Reply-Message += 'mess\\age' rlm_ldap (ldap): Released connection (0) (0) [ldap] = updated (0) if ((ok || updated) && User-Password && !control:Auth-Type) { (0) if ((ok || updated) && User-Password && !control:Auth-Type) -> TRUE (0) if ((ok || updated) && User-Password && !control:Auth-Type) { (0) update control { (0) &Auth-Type := LDAP (0) } # update control = noop (0) } # if ((ok || updated) && User-Password && !control:Auth-Type) = noop (0) [expiration] = noop (0) [logintime] = noop Not doing PAP as Auth-Type is already set. (0) [pap] = noop (0) } # authorize = updated (0) Found Auth-Type = LDAP (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "user003" (0) ldap: Using user DN from request "uid=user003,ou=Users,dc=rdd-osaka,dc=soliton,dc=corp" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user "uid=user003,ou=Users,dc=rdd-osaka,dc=soliton,dc=corp" was successful rlm_ldap (ldap): Released connection (1) (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) if (EAP-Key-Name && &reply:EAP-Session-Id) { (0) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (0) } # post-auth = noop (0) Login OK: [user003] (from client naeps245 port 0 cli 112233445566) (0) Sent Access-Accept Id 112 from 192.168.1.123:1812 to 192.168.1.245:50341 length 78 (0) Reply-Message += "mess\\age" (0) Reply-Message += "mess\\age" (0) Reply-Message += "mess\\age" (0) Reply-Message += "mess\\age" (0) Finished request Waking up in 4.9 seconds.

3 3