November 2010 - Freeradius-Users - lists.freeradius.org

Detailed Logging freeradius Request Packets
by Jean-Francois Mousinho 28 Oct '19

28 Oct '19

Hi, I've tried to find a way of detail logging the packets sent by freeradius to the client in the authentication phase but didn't found a way of doing it. Maybe I've not looked correctly so I'm asking if it's actually possible? I was able to log detailed packets sent by the client (Response packets) but not the ones sent by freeradius to the client (except accounting and proxied ones). Thanks for your time. Jean-François Mousinho

4 6

Re: rlm_perl authentication override
by Henry 20 Nov '12

20 Nov '12

Quoting tnt(a)kalik.net: >>>> Is there a way to change the reply from Access-Reject, to Access-Accept? >>>> > > Change freeradius.internal attribute Packet-Type in Post-Auth-Type Reject > section. Changing freeradius.internal Packet-Type from Access-Reject to Access-Accept would affect ALL logins - even logins which *should* be rejected. I'm referring to changing Access-Reject to Access-Accept under certain circumstances only -- not globally for all logins. ...or am I misunderstanding what you're suggesting? Thanks Henry

5 13

Freeradius 2 , TTLS/PAP, multiples questions
by Jérôme BERTHIER 19 Jun '12

19 Jun '12

Hi, I'm trying to configure Freeradius 2 to implement EAP/TTLS-PAP authentication method on my Cisco AP1242. It works but I'd like some precisions to get configuration files as small as possible. What is the shortest way to configure it ? authorize { preprocess auth_log suffix eap { ok = return } files ldap pap } authenticate { Auth-Type PAP { pap } Auth-Type LDAP { ldap } eap } Are the lines correct ? Moreover, I've got trouble to implement few functions. First, what's the right way to implement check for Simultaneous-Use ? For cisco nas type, Freeradius seems to use snmp check but where should I configure SNMP read community in order to make it possible ? Then, during EAP process, is it possible to check if inner identity equal outer identity and if not to reject request ? Finally, I've got problem with NetworkManager under Fedora 9 (not tested on other distribution). If Session resumption / fast reauthentication cache is not enabled, clients can't reassociate and ask for session resumption again. Is there a workaround ? Thanks -- Jérôme BERTHIER Network administrator INRIA Bordeaux - Sud-Ouest Service des Moyens Informatiques 05 24 57 40 50

4 8

EAP-TTLS-PAP-LDAP
by Rohaizam Abu Bakar 12 Jun '12

12 Jun '12

Trying to do EAP-TTLS-PAP with CRYPT passwd in LDAP.. The tunelling seems fine.. but up to comparing the password it will failed. Refer below logs & config Some says (http://felipe-alfaro.org/blog/category/radius/) PAP is tunneled inside EAP-TTLS through EAP-GTC... Tried that as well.. still same error.. gtc { auth_type = PAP [even trying to change to LDAP/OCE - still same error) } Error ==== auth: type Local auth: user supplied User-Password does NOT match local User-Password auth: Failed to validate the user. Login incorrect: [jaroce2(a)ocemy015.com] (from client localhost port 0) TTLS: Got tunneled Access-Reject rlm_eap: Handler failed in EAP/ttls rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 9 modcall: leaving group authenticate (returns invalid) for request 9 auth: Failed to validate the user. Login incorrect: [jaroce2(a)ocemy015.com] (from client OCE_JARING port 241 cli 00-11-5b-2d-b2-8e) With setting:- a) radiusd.conf ldapOCE { --some setting } authorize { eap Autz-Type OCE { ldapOCE } } authenticate { Auth-Type OCE { ldapOCE } eap } b) eap.conf eap { default_eap_type = ttls tls { --some setting } ttls { default_eap_type = md5 } c) users:- DEFAULT Realm == "my015.com", Autz-Type := OCE

9 16

Issues with squid_radius_auth
by Ovi C 19 Mar '12

19 Mar '12

Hi. I'm using squid proxy server with freeradius authentication with postgresql backend running on Debian Squeeze and I get the following error from freeradius. ./squid_radius_auth -f /etc/squid3/squid_radius_auth.conf andrei tester Warning: Received invalid reply digest from server Warning: Received invalid reply digest from serverERR I'll post the files configuration and output from freeradius debug: cat /etc/squid3/squid_radius_auth.conf # squid_rad_auth configuration file # MvS: 28-10-1998 server 192.168.107.2 secret testing -------------------------------------------------------------------------------------------------------------------------------- freeradius -X stripped output: freeradius -X including configuration file /etc/freeradius/sites-enabled/default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.107.2 port 48244, id=1, length=64 User-Name = "andrei" User-Password = "WIdk\214\356\376G/\215X\367n\246h\224" NAS-Port = 111 NAS-Port-Type = Async NAS-IP-Address = 192.168.107.2 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.107.2/auth-detail-20100129 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.107.2/auth-detail-20100129 [auth_log] expand: %t -> Fri Jan 29 18:34:05 2010 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "andrei", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[unix] returns notfound ++[files] returns noop [sql] expand: %{User-Name} -> andrei [sql] sql_set_user escaped user --> 'andrei' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = 'andrei' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 5 [sql] User found in radcheck table [sql] expand: SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = 'andrei' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 [sql] expand: SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM radusergroup WHERE UserName='andrei' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 1 rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP +- entering group PAP {...} [pap] login attempt with password "WIdk?��G/?X�n�h?" [pap] Using clear text password "tester" [pap] Passwords don't match ++[pap] returns reject Failed to authenticate the user. WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS! Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> andrei attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 1 to 192.168.107.2 port 48244 rad_recv: Access-Request packet from host 192.168.107.2 port 48244, id=1, length=64 Sending duplicate reply to client localhost port 48244 - ID: 1 Sending Access-Reject of id 1 to 192.168.107.2 port 48244 Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.107.2 port 48244, id=1, length=64 Sending duplicate reply to client localhost port 48244 - ID: 1 Sending Access-Reject of id 1 to 192.168.107.2 port 48244 Waking up in 3.9 seconds. rad_recv: Access-Request packet from host 192.168.107.2 port 48244, id=1, length=64 Sending duplicate reply to client localhost port 48244 - ID: 1 Sending Access-Reject of id 1 to 192.168.107.2 port 48244 Waking up in 2.9 seconds. rad_recv: Access-Request packet from host 192.168.107.2 port 48244, id=1, length=64 Sending duplicate reply to client localhost port 48244 - ID: 1 Sending Access-Reject of id 1 to 192.168.107.2 port 48244 Waking up in 1.9 seconds. rad_recv: Access-Request packet from host 192.168.107.2 port 48244, id=1, length=64 Sending duplicate reply to client localhost port 48244 - ID: 1 Sending Access-Reject of id 1 to 192.168.107.2 port 48244 Waking up in 0.9 seconds. Cleaning up request 0 ID 1 with timestamp +3 Ready to process requests. ---------------------------------------------------------------------------------------------------------------------------------- cat /etc/freeradius/clients.conf client localhost { ipaddr = 192.168.107.2 netmask = 32 secret = testing require_message_authenticator = no shortname = localhost nastype = other -------------------------------------------------------------------------------------------------------------------------- Somehow the client is not sending the cleartext password from database and this causes the error. The shared secret is correct as I use the same configuration for a PPPOE server and everything works as it should. Any hints ?

3 2

test suite simulating NAS for development?
by Mark McWiggins 14 Feb '12

14 Feb '12

Hi All, We're developing an application to capture log data from Radius, but we don't have a NAS to test with to generate the logs. Is there some test suite available to do this? Thanks much; if none is available we will probably develop one and I think our management will consent to share it. -- Mark McWiggins Client Integration Engineer mark.mcwiggins(a)messagesystems.com 443-656-3311 ext 344

6 9

Daily accounting
by David Roze 02 Dec '11

02 Dec '11

Hi everyone, I have seen a lot of people who are trying to get traffic accounting collected at regular intervals to generate graphs and view per day/month etc... I have made a few modifications in order to achieve this. You can see it at http://www.netexpertise.eu/en/FreeRadius/DailyAcct.html It works on Mysql setup but can be adapted to any db. I'd be grateful to get some feedback on this. A lot of ISPs are running into this problem. Hope this helps Regards, David

2 1

ldap+freeradius
by David N'DAKPAZE 09 Nov '11

09 Nov '11

Hello, Please I 'd to know how to use an ldap as a database of freeradius. I use freeradius-server-2.1.3. Is it possible to use more than one nas in clients.conf ? If yes how to do it? How to configure EAP-TLS ? Thank you for your help. Rato

9 61

How to configure proxy server to send a copy of acct to remote/home server
by Difan Zhao 27 Oct '11

27 Oct '11

Dear experts, I configured my Freeradius2.1.7 server to be a proxy server which will forward the PEAP authentication packages to a remote server. The authentication part works great. I configured my switch to send accounting information to the proxy server. The proxy server is using MySQL to store the acct info. This part works fine too. However I'm requested to also send a copy of the acct info to the remote server... I'm still checking my switch (Cisco) and see if it can send two copies of acct info to two different servers at the same time. However, is it possible to make FreeRadius to automatically forward a copy to the remote server?? Thanks! Difan Zhao, M.Eng Network Engineer Guest-Tek Interactive Entertainment Inc. Email: difan.zhao(a)guest-tek.com Office: +1 (403) 509 1010 ext 3048 Cell: +1 (403) 689 7514 www.guest-tek.com INTERNET | MEDIA | VOICE The contents of this email are confidential and intended for the recipient only. If you have received this email in error, please notify us, and destroy all copies.

3 2

Freeradius capable of url-redirect
by Nathan McDavit-Van Fleet 15 Aug '11

15 Aug '11

Cisco has a feature to redirect users to a splash page after 802.1x/WPA2-personal authentication. We are interested in this feature so we can notify users of our EAP-TTLS service that we are migrating to PEAP-MSCHAPv2. I have included the url for the configuration description (of Cisco ACS). But essentially there is a av-pair and url-redirect attribute which need to be configured on Cisco ACS (and some other wireless configs) in order to enable that option. I am not talking about a captive portal. We want to display a info page for the users of a specific protocol. The document below describes that it happens after authentication and network access. http://www.cisco.com/en/US/products/ps6366/products_configuration_example091 86a0080956185.shtml Is this handled somehow is Freeradius?

6 12