November 2008 - Freeradius-Users - lists.freeradius.org

EAP-TTLS-PAP-LDAP
by Rohaizam Abu Bakar 12 Jun '12

12 Jun '12

Trying to do EAP-TTLS-PAP with CRYPT passwd in LDAP.. The tunelling seems fine.. but up to comparing the password it will failed. Refer below logs & config Some says (http://felipe-alfaro.org/blog/category/radius/) PAP is tunneled inside EAP-TTLS through EAP-GTC... Tried that as well.. still same error.. gtc { auth_type = PAP [even trying to change to LDAP/OCE - still same error) } Error ==== auth: type Local auth: user supplied User-Password does NOT match local User-Password auth: Failed to validate the user. Login incorrect: [jaroce2(a)ocemy015.com] (from client localhost port 0) TTLS: Got tunneled Access-Reject rlm_eap: Handler failed in EAP/ttls rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 9 modcall: leaving group authenticate (returns invalid) for request 9 auth: Failed to validate the user. Login incorrect: [jaroce2(a)ocemy015.com] (from client OCE_JARING port 241 cli 00-11-5b-2d-b2-8e) With setting:- a) radiusd.conf ldapOCE { --some setting } authorize { eap Autz-Type OCE { ldapOCE } } authenticate { Auth-Type OCE { ldapOCE } eap } b) eap.conf eap { default_eap_type = ttls tls { --some setting } ttls { default_eap_type = md5 } c) users:- DEFAULT Realm == "my015.com", Autz-Type := OCE

9 16

Daily accounting
by David Roze 02 Dec '11

02 Dec '11

Hi everyone, I have seen a lot of people who are trying to get traffic accounting collected at regular intervals to generate graphs and view per day/month etc... I have made a few modifications in order to achieve this. You can see it at http://www.netexpertise.eu/en/FreeRadius/DailyAcct.html It works on Mysql setup but can be adapted to any db. I'd be grateful to get some feedback on this. A lot of ISPs are running into this problem. Hope this helps Regards, David

2 1

rlm_sql: "NUMERIC VALUE OUT OF RANGE" error
by Vegard Svanberg 07 Jul '11

07 Jul '11

Freeradius 2.1.0. I have a NAS which sends a NAS-Port-Id attribute in the range 2147483648..2164260863. PostgreSQL doesn't like the query Freeradius performs. It's choking when trying to insert for instance '2163214239::integer' into the radacct table. $ select 2163214239::integer; ERROR: integer out of range Example: INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStopDelay) values('80f0079f', '5c9f0b7076dcc9c0', 'username', NULLIF('', ''), '1.2.3.4', 2163214239::integer, 'Wireless-802.11', ('2008-09-26 09:52:52'::timestamp - '1'::interval - '3382'::interval), ('2008-09-26 09:52:52'::timestamp - '1'::interval), NULLIF('3382', '')::bigint, '', '', (('0'::bigint << 32) + '57743'::bigint), (('0'::bigint << 32) + '294709'::bigint), 'hotspot', 'XX:XX:XX:XX:XX:XX', 'Lost-Service', '', '', NULLIF('192.168.12.94', '')::inet, 0) rlm_sql_postgresql: Status: PGRES_FATAL_ERROR rlm_sql_postgresql: Error integer out of range rlm_sql_postgresql: Postgresql Fatal Error: [22003: NUMERIC VALUE OUT OF RANGE] Occurred!! [sql] Couldn't insert SQL accounting STOP record - ERROR: integer out of range rlm_sql (sql): Released sql socket id: 3 ++[sql] returns fail Quick fixes...? -- Vegard Svanberg <vegard(a)svanberg.no> [*Takapa@IRC (EFnet)]

6 6

Calling-Station-ID not sent by pam_radius_auth.
by Christiaan Ehlers 25 May '11

25 May '11

Hi I currently running the following system: Server: FreeRadius, MySQL Client: pam_radius_auth, libnss_mysql.so I use the freeradius to auth and account ssh logins, here is my pam.d/sshd file on the client. #%PAM-1.0 auth sufficient /lib/security/pam_radius_auth.so debug auth required /lib/security/pam_stack.so service=system-auth auth required /lib/security/pam_nologin.so account sufficient /lib/security/pam_radius_auth.so debug account required /lib/security/pam_stack.so service=system-auth password required /lib/security/pam_stack.so service=system-auth session required /lib/security/pam_mkhomedir.so skel=/etc/skel/ umask=0022 session sufficient /lib/security/pam_radius_auth.so debug conf=/etc/radiusclient/servers session required /lib/security/pam_stack.so service=system-auth session required /lib/security/pam_limits.so session optional /lib/security/pam_console.so Now when I authenticate I can see that the Calling-Station-ID gets passed, but when I do authentication that field seems to be missing. Here is the output of radiusd -X Ready to process requests. rad_recv: Access-Request packet from host 10.0.0.1:3698, id=220, length=89 User-Name = "test" User-Password = "123pass" NAS-IP-Address = 10.0.0.1 NAS-Identifier = "sshd" NAS-Port = 2673 NAS-Port-Type = Virtual Service-Type = Authenticate-Only Calling-Station-Id = "10.1.1.1" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 153 modcall[authorize]: module "files" returns ok for request 0 radius_xlat: 'test' rlm_sql (sql): sql_set_user escaped user --> 'test' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'test' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 7 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'test' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'test' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'test' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 7 modcall[authorize]: module "sql" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type pap auth: type "PAP" Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 0 rlm_pap: login attempt by "test" with password 123pass rlm_pap: Using password "$1$n/uxpq.r$FBKqAEC8KvsK13QVHRwAf/" for user test authentication. rlm_pap: Using CRYPT encryption. rlm_pap: User authenticated succesfully modcall[authenticate]: module "pap" returns ok for request 0 modcall: group Auth-Type returns ok for request 0 Sending Access-Accept of id 220 to 10.0.0.1:3698 Framed-IP-Address := 10.1.1.1 Framed-Protocol := PPP Service-Type := Framed-User Framed-Compression := Van-Jacobson-TCP-IP Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Accounting-Request packet from host 10.0.0.1:3698, id=66, length=72 User-Name = "test" NAS-IP-Address = 10.0.0.1 NAS-Identifier = "sshd" NAS-Port = 2673 NAS-Port-Type = Virtual Acct-Status-Type = Start Acct-Session-Id = "00002673" Acct-Authentic = RADIUS Processing the preacct section of radiusd.conf modcall: entering group preacct for request 1 modcall[preacct]: module "preprocess" returns noop for request 1 rlm_acct_unique: Hashing 'NAS-Port = 2673,Client-IP-Address = 10.0.0.1,NAS-IP-Address = 10.0.0.1,Acct-Session-Id = "00002673",User-Name = "test"' rlm_acct_unique: Acct-Unique-Session-ID = "a0ec8ab13c262f56". modcall[preacct]: module "acct_unique" returns ok for request 1 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 1 modcall[preacct]: module "files" returns noop for request 1 modcall: group preacct returns ok for request 1 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 1 radius_xlat: '/usr/local/var/log/radius/radacct/10.0.0.1/detail-20050603' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.0.0.1/detail-20050603 modcall[accounting]: module "detail" returns ok for request 1 modcall[accounting]: module "unix" returns ok for request 1 radius_xlat: '/usr/local/var/log/radius/radutmp' radius_xlat: 'test' modcall[accounting]: module "radutmp" returns ok for request 1 radius_xlat: 'test' rlm_sql (sql): sql_set_user escaped user --> 'test' radius_xlat: 'INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('00002673', 'a0ec8ab13c262f56', 'test', '', '10.0.0.1', '2673', 'Virtual', '2005-06-03 14:20:01', '0', '0', 'RADIUS', '', '', '0', '0', '', '', '', '', '', '', '', '0')' rlm_sql (sql): Reserving sql socket id: 6 rlm_sql (sql): Released sql socket id: 6 modcall[accounting]: module "sql" returns ok for request 1 modcall: group accounting returns ok for request 1 Sending Accounting-Response of id 66 to 10.0.0.1:3698 Finished request 1 Going to the next request Cleaning up request 1 ID 66 with timestamp 42a05901 Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 220 with timestamp 42a05901 Nothing to do. Sleeping until we see a request. As you can see the CallingStationId is empty, also there is no mention of it in the Accounting request packet. If this is not supported by the accounting, is there a way to get it from the authentication section? Would also like to say that I know this is more related to the PAM module and I assume this makes this mail a bit out of context in this mail group, but any help would be most appreciated. Kind Regards Christiaan Ehlers

4 3

Password in Radius Debug
by Cody Jarrett 17 Mar '10

17 Mar '10

I notice the password during supplicant connects to the radius server are displayed in plain text. Is there a way to disable this? -- Cody Jarrett IT Freedom cody.jarrett(a)itfreedom.com Office: 512.419.0070 Fax: 512.419.0080

5 5

Re:Help with md5 database encryption (Oscar Trejo)
by Oscar Trejo 11 Oct '09

11 Oct '09

The version of the freeradius is v 1.1.0 I hope these is what you ask me. Thanks !!! > What freeradius version is this? > > Ivan Kalik > Kalik Informatika ISP > > > Dana 23/9/2008, "Oscar Trejo" <racso83(a)gmail.com> piše: > > >Hi, I had a freeradius server working, but only when the password are > saved > >on the database on plain-text with out encryption, my question is about > how > >to save the instructions on the table radcheck and radgroupcheck to work > >with Password encryption MD5. > > > >My working free radius tables had > > > >radcheck > >+----+----------+-----------+----+--------+ > >| id | UserName | Attribute | op | Value | > >+----+----------+-----------+----+--------+ > >| 3 | oscar | Password | == | uno | > >+----+----------+-----------+----+--------+ > > > >radgroupcheck > >+----+-----------+-----------+----+-------+ > >| id | GroupName | Attribute | op | Value | > >+----+-----------+-----------+----+-------+ > >| 1 | dinamico | Auth-Type | := | Local | > >+----+-----------+-----------+----+-------+ > > > > > > > >When i had the password with simple plaint text with out encryption the > >result is the next > > > >Auth: Login OK: [oscar/uno] (from client ##### port ########## cli > >##:##:##:##:##:##) > > > > > > > >But I want to save the password with MD5 encryption, the freeradius load > >correctly the module pap, chap and eap with out errors, but when i try to > >change the configuration for example : > > > >radcheck > >+----+----------+-----------+----+--------+ > >| id | UserName | Attribute | op | Value | > >+----+----------+-----------+----+--------+ > >| 3 | oscar | MD5-Password | == | 1eaa8bb195869a23f081acbb5bf08527 | > >+----+----------+-----------+----+--------+ > > > >radgroupcheck > >+----+-----------+-----------+----+-------+ > >| id | GroupName | Attribute | op | Value | > >+----+-----------+-----------+----+-------+ > >| 1 | dinamico | Auth-Type | := | PAP | > >+----+-----------+-----------+----+-------+ > > > > > >the free radius log gave me the next error: > > > > > >Error: rlm_sql_getvpdata: database query error > >Info: rlm_sql (sql): No matching entry in the database for request from > user > >[oscar] > >Auth: Login incorrect: [oscar/uno] (from client ##### port ########## cli > >##:##:##:##:##:##) > > > > > > > > > >But i need the encryption with MD5, any suggestion > > > >Before any answer I gave you thanks for the help > > >

5 6

Problem with radzap
by Pierre-henri Baraffe 01 Oct '09

01 Oct '09

Hello, I have a mistake with my freeradius. On server with 1.1.7 the command : "radzap -u username -P port-nas 127.0.0.1 secret" work with no problem On a new server with FR 2.0.5, with the same command i have this error radclient:: failed to get value I have no more message with the "-x" option and nothing in the log. I have the same things if i replace "127.0.0.1" by "localhost" my client.conf client localhost { ipaddr = 127.0.0.1 secret = secret require_message_authenticator = no shortname = localhost nastype = other # localhost isn't usually a NAS... } I don't understand. Thanks for your help. ph

3 3

Version 2.1.0 has been released.
by Alan DeKok 05 Aug '09

05 Aug '09

We are happy to announce the release of Version 2.1.0 of the FreeRADIUS server, with some major new features. Highlights include improved SNMP support, dynamically-defined clients, much more flexible (and readable) debugging mode, WiMAX support, fast reauthentication for PEAP and TTLS, and a command-line tool to administer a running server. The administration tool can stop the server, HUP it, or in limited cases, change the configuration of a running server, and cause just one module to reload it's configuration. Alan DeKok. Detailed change log: FreeRADIUS 2.1.0 Fri Sep 5 13:20:01 CEST 2008; , urgency=medium Feature improvements * Clients may now be defined dynamically, based on IP address. See raddb/sites-available/dynamic-clients. * SNMP support is now available through an experimental Perl script. See scripts/snmp-proxy/README * SNMP statistics are available through Status-Server packets. See raddb/sites-available/status * Added more Microsoft attributes from bug #568. * The "linelog" module has more functionality and flexibility. See raddb/modules/linelog. * The debugging output has been sanitized. It should be much more readable. * Debug logs can now be turned on/off while the server is running, for a user, group, realm, etc. See the "log" section of radiusd.conf. * Added support for WiMAX Forum attributes. The dynamic keys are not yet calculated. See share/dictionary.wimax * Added session resumption for PEAP and TTLS. See raddb/eap.conf, "cache" sub-section. * Added "radmin" command-line tool for administering a running server. See "man radmin" and raddb/sites-available/control-socket. Bug fixes * Double escaping of '\\' in the "users" (and some other) files has been fixed. If you have '\\' in the "users" file, your configuration WILL NEED TO BE CHECKED, AND FIXED! * Parse "security" section in radiusd.conf. This was accidentally deleted in 2.0.5. Closes bug #566. * Bind to interface before IP, which allows DHCP sockets to listen on "*" for multiple interfaces. * Fix handling of giaddr in DHCP responses. * Corrected parsing of status_check in home_server so that it works. * Fix hints so that "Puser" works again. * Removed length restrictions on attribute names in the dictionaries. * Update socket code to avoid C compiler optimizations.

6 14

RADIUS attributes: acctoutputoctects and acctinputoctect in mikrotik
by Santiago Balaguer García 19 May '09

19 May '09

7 7

freeradius mysql apache2 for Wi Fi hotspotsetup
by Mini Jerome 19 May '09

19 May '09

Hi, I have installed free radius to work with mysql on Ubuntu 6.0.6 with radiusclient Nomadicx AG 2000 and it works fine. At present on Nomadix , internal web server is on and it gives the login and logout pages whenever a mysql databse username and passwords are submitted ,session starts on radius server I would like to make the login/logout pages from an external web server instead of internal webserver of nomadix which is configured on Nomadix and restrict users to go to loginpage forcefully , whenever the wifi customer has been assigned dynamic IP from Nomadix. Can any one help????//???????? Mini Jerome

3 2