June 2005 - Freeradius-Users - lists.freeradius.org

external script in <defunct> state
by rashad 27 Jun '05

27 Jun '05

I'm using freeradius 1.0.4 now. Note this problem doesn't persist in my old 1.0.2 installation. > I wan to run external script when Acct-Stop packets received. My acct_users > file: > DEFAULT Acct-Status-Type == Stop > Exec-Program = "/usr/local/sbin/testacct.php" > Script runs and executes normally but stays in <defunct> state for every > call: > 5154 ? Z 0:00 [testacct.php <defunct>] > 5159 ? Z 0:00 [testacct.php <defunct>] > 5161 ? Z 0:00 [testacct.php <defunct>] > ...... > Where is the mistake can be? This is a known problem for versions before 1.0.3. If you've not upgraded to 1.0.4, please do so, and try it again.

1 0

Re: ldap redundant w/ ldap-group
by Jan-Piet Mens 27 Jun '05

27 Jun '05

Dustin, thank you very much for this! It works like a charm, even though it is quite ugly... -JP On Fri Dec 10 2004 at 20:58:59 CET, Dustin Doris wrote: ... > However, when I am using redundant, I cannot have this redundancy for > Ldap-Group lookups. It appears that for Ldap-Group lookups, only the last > ldap instance that I create (ldap2) is actually used for Ldap-Group > lookups. If I take down ldap1, I can still authenticate. I get the > redundancy of ldap2 for autz and auth. However, if I put ldap1 back up > and take down ldap2, I get a failure because I cannot lookup the > Ldap-Group, so it falls through to the reject statement. > > So, reading through configurable failover, I tried instantiating both > ldap1 and ldap2. This was neat, because I could specify ldap1-Ldap-Group > or ldap2-Ldap-Group. ...

1 0

external script in <defunct> state
by rashad 27 Jun '05

27 Jun '05

I wan to run external script when Acct-Stop packets received. My acct_users file: DEFAULT Acct-Status-Type == Stop Exec-Program = "/usr/local/sbin/testacct.php" Script runs and executes normally but stays in <defunct> state for every call: 5154 ? Z 0:00 [testacct.php <defunct>] 5159 ? Z 0:00 [testacct.php <defunct>] 5161 ? Z 0:00 [testacct.php <defunct>] ...... Where is the mistake can be?

2 1

installing freeradius
by Marios Maravelias 27 Jun '05

27 Jun '05

Is there any Greek user that can help me with the installation of freeradius ? my email is : m.maravelias(at)tophost(dot)gr

1 0

link change suggestion
by energy＠onedatacentral.com 26 Jun '05

26 Jun '05

On the FreeRadius homepage under: 05 October, 2004 Setting up wireless authentication the link has changed to: http://www.tldp.org/HOWTO/8021X-HOWTO/ Sorry, this wasn't a nitpick. Just thought it might help us newbies.

1 0

freeradius 0.9.3 capabilities
by energy＠onedatacentral.com 26 Jun '05

26 Jun '05

I am looking to perform certificate authentication for both external pptp connected users and 802.1x wireless users. SLES 9 comes with FreeRadius 0.9.3. Does this version contain these capabilities or am I better off upgrading? I know last time I upgraded a SuSE server the upgrade was not fun. So I don't want to upgrade for "newer code is better" reasons, but to achieve the goal of certificate use if required.

2 1

Re: Installation of FreeRadius on Solaris 10
by Stefan.Neis＠t-online.de 26 Jun '05

26 Jun '05

Jim Seymour wrote: > > Jas <pingindia(a)yahoo.com> wrote: > [snip] > > /usr/ccs/bin/ld -G -z defs -h libltdl.so.3 -o > > .libs/libltdl.so.3.1.0 ltdl.lo -ldl -lnsl -lresolv > > -lsocket -lposix4 -lpthread -lcrypto -lssl -lc > > ld: fatal: library -lcrypto: not found > > ld: fatal: library -lssl: not found > [snip] > > You're missing the libraries libcrypto and libssl. But then, why does configure in the OPs log claim they are available: > > checking for openssl/ssl.h... yes > > checking for DH_new in -lcrypto... yes > > checking for SSL_new in -lssl... yes That's totally puzzling to me. I think there something else going on ... :-( Regards, Stefan

3 2

Help: Installation of FreeRadius 1.0.4 on Solaris 10
by Jaspreet Brar 26 Jun '05

26 Jun '05

Hi All, I would really appriciate, if you would kindly help me out. I'm trying to install FreeRadius-1.0.4(downloaded from freeradius.org) on Solaris OS 10 (SPARC) as below: /freeradius-1.0.4# ./configure /freeradius-1.0.4# make /freeradius-1.0.4# make install But I'm getting errors while installing it. /freeradius-1.0.4# ./configure ... ... config.h is unchanged* /freeradius-1.0.4# make make: make not found * Please suggest me how to install it properly. Below is what i captured in configure.log file This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. configure:748: checking for gcc configure:861: checking whether the C compiler (gcc ) works configure:877: gcc -o conftest conftest.c 1>&5 configure:903: checking whether the C compiler (gcc ) is a cross-compiler configure:908: checking whether we are using GNU C configure:917: gcc -E conftest.c configure:936: checking whether gcc accepts -g configure:969: checking how to run the C preprocessor configure:990: gcc -E conftest.c >/dev/null 2>conftest.out configure:1049: checking for AIX configure:1075: checking whether gcc needs -traditional configure:1121: checking whether we are using SUNPro C configure:1130: gcc -E conftest.c configure:1141: checking for ranlib configure:1176: checking whether byte ordering is bigendian configure:1194: gcc -c -g -O2 conftest.c 1>&5 configure: In function `main': configure:1189: error: `bogus' undeclared (first use in this function) configure:1189: error: (Each undeclared identifier is reported only once configure:1189: error: for each function it appears in.) configure:1189: error: syntax error before "endian" configure: failed program was: #line 1183 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> int main() { #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN bogus endian macros #endif ; return 0; } configure:1242: gcc -o conftest -g -O2 conftest.c 1>&5 configure: failed program was: #line 1229 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ union { long l; char c[sizeof (long)]; } u; u.l = 1; exit (u.c[sizeof (long) - 1] == 1); } configure:1269: checking for gmake configure:1337: checking for gmake configure:1420: checking for lt_dlinit in -lltdl configure:1439: gcc -o conftest -g -O2 conftest.c -lltdl 1>&5 ld: fatal: library -lltdl: not found ld: fatal: File processing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 1428 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char lt_dlinit(); int main() { lt_dlinit() ; return 0; } configure:1544: checking for Cygwin environment configure:1560: gcc -c -g -O2 conftest.c 1>&5 configure: In function `main': configure:1556: error: `__CYGWIN32__' undeclared (first use in this function) configure:1556: error: (Each undeclared identifier is reported only once configure:1556: error: for each function it appears in.) configure: failed program was: #line 1549 "configure" #include "confdefs.h" int main() { #ifndef __CYGWIN__ #define __CYGWIN__ __CYGWIN32__ #endif return __CYGWIN__; ; return 0; } configure:1577: checking for mingw32 environment configure:1589: gcc -c -g -O2 conftest.c 1>&5 configure: In function `main': configure:1585: error: `__MINGW32__' undeclared (first use in this function) configure:1585: error: (Each undeclared identifier is reported only once configure:1585: error: for each function it appears in.) configure: failed program was: #line 1582 "configure" #include "confdefs.h" int main() { return __MINGW32__; ; return 0; } configure:1681: checking host system type configure:1702: checking build system type configure:1731: checking for ld used by GCC configure:1799: checking if the linker (/usr/ccs/bin/ld) is GNU ld configure:1816: checking for /usr/ccs/bin/ld option to reload object files configure:1828: checking for BSD-compatible nm configure:1866: checking whether ln -s works configure:1887: checking how to recognise dependant libraries configure:2070: checking for object suffix configure:2076: gcc -c -g -O2 conftest.c 1>&5 configure:2096: checking for executable suffix configure:2106: gcc -o conftest -g -O2 conftest.c 1>&5 configure:2137: checking command to parse /usr/ccs/bin/nm -p output configure:2217: gcc -c -g -O2 conftest.c 1>&5 configure:2220: /usr/ccs/bin/nm -p conftest.o | sed -n -e 's/^.*[ ]$[BDT][BDT]*$[ ][ ]*$[_A-Za-z][_A-Za-z0-9]*$$/\1 \2\3 \3/p' > conftest.nm configure:2271: gcc -o conftest -g -O2 conftest.c conftstm.o 1>&5 configure:2320: checking for dlfcn.h configure:2330: gcc -E conftest.c >/dev/null 2>conftest.out configure:2498: checking for ranlib configure:2565: checking for strip configure:2810: checking for objdir configure:2841: checking for gcc option to produce PIC configure:2993: checking if gcc PIC flag -fPIC works configure:3007: gcc -c -g -O2 -fPIC -DPIC conftest.c 1>&5 configure:3063: checking if gcc static flag -static works configure:3078: gcc -o conftest -g -O2 -static conftest.c 1>&5 ld: fatal: library -lc: not found ld: fatal: library -lc: not found ld: fatal: File processing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 3071 "configure" #include "confdefs.h" int main() { ; return 0; } configure:3109: checking if gcc supports -c -o file.o configure:3128: gcc -c -g -O2 -o out/conftest2.o conftest.c 1>&5 configure:3157: checking if gcc supports -c -o file.lo configure:3175: gcc -c -g -O2 -c -o conftest.lo conftest.c 1>&5 configure:3233: checking if gcc supports -fno-rtti -fno-exceptions configure:3246: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c conftest.c 1>&5 cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C configure:3277: checking whether the linker (/usr/ccs/bin/ld) supports shared libraries configure:3965: checking how to hardcode library paths into programs configure:3997: checking whether stripping libraries is possible configure:4015: checking dynamic linker characteristics configure:4416: checking if libtool supports shared libraries configure:4424: checking whether to build shared libraries configure:4451: checking whether to build static libraries configure:4494: checking for shl_load configure:4522: gcc -o conftest -g -O2 conftest.c 1>&5 Undefined first referenced symbol in file shl_load /var/tmp//cc0O8ZuU.o ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 4499 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char shl_load(); below. */ #include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else shl_load(); #endif ; return 0; } configure:4540: checking for shl_load in -ldld configure:4559: gcc -o conftest -g -O2 conftest.c -ldld 1>&5 ld: fatal: library -ldld: not found ld: fatal: File processing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 4548 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load(); int main() { shl_load() ; return 0; } configure:4578: checking for dlopen configure:4606: gcc -o conftest -g -O2 conftest.c 1>&5 configure:4775: checking whether a program can dlopen itself configure:4846: gcc -o conftest -g -O2 -DHAVE_DLFCN_H conftest.c 1>&5 configure:4869: checking whether a statically linked program can dlopen itself configure:4940: gcc -o conftest -g -O2 -DHAVE_DLFCN_H conftest.c 1>&5 configure:5654: checking logdir configure:5676: checking radacctdir configure:5698: checking raddbdir configure:5910: checking for perl configure:5949: checking for snmpget configure:5988: checking for snmpwalk configure:6027: checking for rusers configure:6063: checking for working aclocal configure:6076: checking for working autoconf configure:6089: checking for working autoheader configure:6105: checking for locate configure:6140: checking for dirname configure:6175: checking for grep configure:6219: checking for pthread.h configure:6229: gcc -E conftest.c >/dev/null 2>conftest.out configure:6258: checking for pthread_create in -lpthread configure:6277: gcc -o conftest -g -O2 conftest.c -lpthread 1>&5 configure:6351: checking for library containing sem_init configure:6369: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lpthread 1>&5 Undefined first referenced symbol in file sem_init /var/tmp//ccons7ln.o ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 6358 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char sem_init(); int main() { sem_init() ; return 0; } configure:6391: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lpthread -lpthread 1>&5 Undefined first referenced symbol in file sem_init /var/tmp//ccMBgZrp.o ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 6380 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char sem_init(); int main() { sem_init() ; return 0; } configure:6391: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lsem -lpthread 1>&5 ld: fatal: library -lsem: not found ld: fatal: File processing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 6380 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char sem_init(); int main() { sem_init() ; return 0; } configure:6391: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lposix4 -lpthread 1>&5 configure:6415: checking for getsockname in -lsocket configure:6434: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lsocket -lposix4 -lpthread 1>&5 configure:6463: checking for inet_aton in -lresolv configure:6482: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lresolv -lsocket -lposix4 -lpthread 1>&5 configure:6511: checking for inet_ntoa in -lnsl configure:6530: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread 1>&5 configure:6570: checking for dirent.h that defines DIR configure:6583: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c 1>&5 configure:6608: checking for opendir in -ldir configure:6627: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -ldir -lnsl -lresolv -lsocket -lposix4 -lpthread 1>&5 ld: fatal: library -ldir: not found ld: fatal: File processing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 6616 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir(); int main() { opendir() ; return 0; } configure:6691: checking for ANSI C header files configure:6704: gcc -E conftest.c >/dev/null 2>conftest.out configure:6771: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread 1>&5 configure:6795: checking whether time.h and sys/time.h may both be included configure:6809: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c 1>&5 configure:6830: checking for sys/wait.h that is POSIX.1 compatible configure:6851: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS conftest.c 1>&5 configure:6905: checking for unistd.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for crypt.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for errno.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for resource.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6911:22: resource.h: No such file or directory configure: failed program was: #line 6910 "configure" #include "confdefs.h" #include <resource.h> configure:6905: checking for getopt.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for malloc.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for utmp.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for utmpx.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for signal.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for sys/select.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for syslog.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for inttypes.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for stdint.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for stdio.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for netdb.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for semaphore.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for arpa/inet.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for netinet/in.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for sys/types.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for sys/socket.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for sys/time.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for sys/wait.h configure:6905: checking for sys/security.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6911:26: sys/security.h: No such file or directory configure: failed program was: #line 6910 "configure" #include "confdefs.h" #include <sys/security.h> configure:6905: checking for fcntl.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for sys/fcntl.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6905: checking for prot.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6911:18: prot.h: No such file or directory configure: failed program was: #line 6910 "configure" #include "confdefs.h" #include <prot.h> configure:6905: checking for sia.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6911:17: sia.h: No such file or directory configure: failed program was: #line 6910 "configure" #include "confdefs.h" #include <sia.h> configure:6905: checking for siad.h configure:6915: gcc -E conftest.c >/dev/null 2>conftest.out configure:6911:18: siad.h: No such file or directory configure: failed program was: #line 6910 "configure" #include "confdefs.h" #include <siad.h> configure:6945: checking for regex.h configure:6955: gcc -E conftest.c >/dev/null 2>conftest.out configure:7027: checking for openssl/ssl.h configure:7042: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7139: checking for openssl/err.h configure:7149: gcc -E conftest.c >/dev/null 2>conftest.out configure:7139: checking for openssl/crypto.h configure:7149: gcc -E conftest.c >/dev/null 2>conftest.out configure:7139: checking for openssl/rand.h configure:7149: gcc -E conftest.c >/dev/null 2>conftest.out configure:7139: checking for openssl/engine.h configure:7149: gcc -E conftest.c >/dev/null 2>conftest.out configure:7178: checking for OpenSSL version >= 0.9.7 configure:7213: checking for DH_new in -lcrypto configure:7228: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto 1>&5 configure:7334: checking for SSL_new in -lssl configure:7349: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7461: checking for off_t configure:7494: checking for pid_t configure:7527: checking for size_t configure:7560: checking for uid_t in sys/types.h configure:7596: checking for socklen_t configure:7615: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7639: checking for uint8_t configure:7658: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7682: checking for uint16_t configure:7701: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7725: checking for uint32_t configure:7744: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7793: checking for getopt_long configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for lockf configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for strsignal configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for sigaction configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for sigprocmask configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for pthread_sigmask configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for snprintf configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7805: warning: conflicting types for built-in function 'snprintf' configure:7793: checking for vsnprintf configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7805: warning: conflicting types for built-in function 'vsnprintf' configure:7793: checking for setsid configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for strncasecmp configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for strcasecmp configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for localtime_r configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for ctime_r configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for gmtime_r configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for strsep configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 Undefined first referenced symbol in file strsep /var/tmp//cc2MO9Nr.o ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 7798 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char strsep(); below. */ #include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strsep(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_strsep) || defined (__stub___strsep) choke me #else strsep(); #endif ; return 0; } configure:7793: checking for inet_aton configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for inet_pton configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for inet_ntop configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for gethostname configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for setlinebuf configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for setvbuf configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for getusershell configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7793: checking for initgroups configure:7821: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:7857: checking whether crypt must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7857: checking whether strncasecmp must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7857: checking whether strcasecmp must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7857: checking whether inet_aton must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7857: checking whether gethostname must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7857: checking whether setlinebuf must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7857: checking whether getusershell must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7857: checking whether endusershell must be declared configure:7917: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7944: checking return type of signal handlers configure:7966: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:7989: checking for ut_xtime in struct utmpx configure:8005: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:8036: checking for ipi_addr in struct in_pktinfo configure:8052: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure: In function `main': configure:8048: error: dereferencing pointer to incomplete type configure: failed program was: #line 8040 "configure" #include "confdefs.h" #include <netinet/in.h> #ifndef offsetof #define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER) #endif int main() { int foo = offsetof(struct in_pktinfo, ipi_addr) ; return 0; } configure:8082: checking for working const configure:8136: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 conftest.c 1>&5 configure:8158: checking type of OS configure:8173: checking for developer gcc flags configure:8188: checking for crypt in -lcrypt configure:8207: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lcrypt -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:8288: checking for setkey in -lcipher configure:8307: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lcipher -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 ld: fatal: library -lcipher: not found ld: fatal: File processing errors. No output written to conftest collect2: ld returned 1 exit status configure: failed program was: #line 8296 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char setkey(); int main() { setkey() ; return 0; } configure:8336: checking for asn1.h,snmp.h,snmp_impl.h configure:8364: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c 1>&5 In file included from configure:8356: /usr/sfw/include/ucd-snmp/asn1.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" In file included from configure:8357: /usr/sfw/include/ucd-snmp/snmp.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" In file included from configure:8358: /usr/sfw/include/ucd-snmp/snmp_impl.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" configure: In function `main': configure:8360: warning: unused variable `a' configure: failed program was: #line 8339 "configure" #include "confdefs.h" #ifdef HAVE_SYS_TYPES_H #include <sys/types.h> #endif #ifdef HAVE_STDINT_H #include <stdint.h> #endif #ifdef HAVE_STDIO_H #include <stdio.h> #endif #ifdef HAVE_NETDB_H #include <netdb.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <ucd-snmp/asn1.h> #include <ucd-snmp/snmp.h> #include <ucd-snmp/snmp_impl.h> int main() { int a = 1; ; return 0; } configure:8405: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/include conftest.c 1>&5 In file included from configure:8397: /usr/sfw/include/ucd-snmp/asn1.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" In file included from configure:8398: /usr/sfw/include/ucd-snmp/snmp.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" In file included from configure:8399: /usr/sfw/include/ucd-snmp/snmp_impl.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" configure: In function `main': configure:8401: warning: unused variable `a' configure: failed program was: #line 8380 "configure" #include "confdefs.h" #ifdef HAVE_SYS_TYPES_H #include <sys/types.h> #endif #ifdef HAVE_STDINT_H #include <stdint.h> #endif #ifdef HAVE_STDIO_H #include <stdio.h> #endif #ifdef HAVE_NETDB_H #include <netdb.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <ucd-snmp/asn1.h> #include <ucd-snmp/snmp.h> #include <ucd-snmp/snmp_impl.h> int main() { int a = 1; ; return 0; } configure:8405: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/local/include conftest.c 1>&5 In file included from configure:8397: /usr/sfw/include/ucd-snmp/asn1.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" In file included from configure:8398: /usr/sfw/include/ucd-snmp/snmp.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" In file included from configure:8399: /usr/sfw/include/ucd-snmp/snmp_impl.h:7:2: #error "Please update your headers or configure using --enable-ucd-snmp-compatibility" configure: In function `main': configure:8401: warning: unused variable `a' configure: failed program was: #line 8380 "configure"m #include "confdefs.h" #ifdef HAVE_SYS_TYPES_H #include <sys/types.h> #endif #ifdef HAVE_STDINT_H #include <stdint.h> #endif #ifdef HAVE_STDIO_H #include <stdio.h> #endif #ifdef HAVE_NETDB_H #include <netdb.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <ucd-snmp/asn1.h> #include <ucd-snmp/snmp.h> #include <ucd-snmp/snmp_impl.h> int main() { int a = 1; ; return 0; } configure:8452: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/include/ucd-snmp conftest.c 1>&5 configure:8444:18: asn1.h: No such file or directory configure:8445:18: snmp.h: No such file or directory configure:8446:23: snmp_impl.h: No such file or directory configure: In function `main': configure:8448: warning: unused variable `a' configure: failed program was: #line 8427 "configure" #include "confdefs.h" #ifdef HAVE_SYS_TYPES_H #include <sys/types.h> #endif #ifdef HAVE_STDINT_H #include <stdint.h> #endif #ifdef HAVE_STDIO_H #include <stdio.h> #endif #ifdef HAVE_NETDB_H #include <netdb.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <asn1.h> #include <snmp.h> #include <snmp_impl.h> int main() { int a = 1; ; return 0; } configure:8452: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/local/include/ucd-snmp conftest.c 1>&5 configure:8444:18: asn1.h: No such file or directory configure:8445:18: snmp.h: No such file or directory configure:8446:23: snmp_impl.h: No such file or directory configure: In function `main': configure:8448: warning: unused variable `a' configure: failed program was: #line 8427 "configure" #include "confdefs.h" #ifdef HAVE_SYS_TYPES_H #include <sys/types.h> #endif #ifdef HAVE_STDINT_H #include <stdint.h> #endif #ifdef HAVE_STDIO_H #include <stdio.h> #endif #ifdef HAVE_NETDB_H #include <netdb.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <asn1.h> #include <snmp.h> #include <snmp_impl.h> int main() { int a = 1; ; return 0; } configure:8499: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/include/ucd-snmp conftest.c 1>&5 configure:8491:18: asn1.h: No such file or directory configure:8492:18: snmp.h: No such file or directory configure:8493:23: snmp_impl.h: No such file or directory configure: In function `main': configure:8495: warning: unused variable `a' configure: failed program was: #line 8474 "configure" #include "confdefs.h" #ifdef HAVE_SYS_TYPES_H #include <sys/types.h> #endif #ifdef HAVE_STDINT_H #include <stdint.h> #endif #ifdef HAVE_STDIO_H #include <stdio.h> #endif #ifdef HAVE_NETDB_H #include <netdb.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <asn1.h> #include <snmp.h> #include <snmp_impl.h> int main() { int a = 1; ; return 0; } configure:8499: gcc -c -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG -I/usr/local/include/ucd-snmp conftest.c 1>&5 configure:8491:18: asn1.h: No such file or directory configure:8492:18: snmp.h: No such file or directory configure:8493:23: snmp_impl.h: No such file or directory configure: In function `main': configure:8495: warning: unused variable `a' configure: failed program was: #line 8474 "configure" #include "confdefs.h" #ifdef HAVE_SYS_TYPES_H #include <sys/types.h> #endif #ifdef HAVE_STDINT_H #include <stdint.h> #endif #ifdef HAVE_STDIO_H #include <stdio.h> #endif #ifdef HAVE_NETDB_H #include <netdb.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <asn1.h> #include <snmp.h> #include <snmp_impl.h> int main() { int a = 1; ; return 0; } configure:8649: checking gethostbyaddr_r() syntax configure:8672: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure: In function `main': configure:8668: error: too many arguments to function `gethostbyaddr_r' configure: failed program was: #line 8662 "configure" #include "confdefs.h" #include <stdio.h> #include <netdb.h> int main() { gethostbyaddr_r(NULL, 0, 0, NULL, NULL, 0, NULL, NULL) ; return 0; } configure:8699: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:8754: checking gethostbyname_r() syntax configure:8766: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure: In function `main': configure:8762: error: too many arguments to function `gethostbyname_r' configure: failed program was: #line 8756 "configure" #include "confdefs.h" #include <stdio.h> #include <netdb.h> int main() { gethostbyname_r(NULL, NULL, NULL, 0, NULL, NULL) ; return 0; } configure:8792: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure:8847: checking ctime_r() syntax configure:8858: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 configure: In function `main': configure:8854: error: too many arguments to function `ctime_r' configure: failed program was: #line 8849 "configure" #include "confdefs.h" #include <time.h> int main() { ctime_r(NULL, NULL, 0) ; return 0; } configure:8883: gcc -o conftest -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -Wall -D_GNU_SOURCE -DNDEBUG conftest.c -lnsl -lresolv -lsocket -lposix4 -lpthread -lcrypto -lssl 1>&5 ____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com

2 1

make error /usr/bin/ld: cannot find -lz
by admin＠zgora.ru 25 Jun '05

25 Jun '05

make faild with this error... gcc -shared sql_mysql.lo -L/usr/lib -L/usr/lib/mysql /usr/lib/libmysqlclient.so -lz -lm -lssl -lcrypto -Wl,-soname -Wl,rlm_sql_mysql-1.0.1.so -o .libs/rlm_sql_mysql-1.0.1.so /usr/bin/ld: cannot find -lz collect2: ld returned 1 exit status gmake[10]: *** [rlm_sql_mysql.la] Error 1 What is -lz ?

4 6

HuntGroups
by Ruslan A Dautkhanov 25 Jun '05

25 Jun '05

Hello ! 1. How to implement using different SQL modules for different huntgroups? Something like this(?): authorize { Huntgroup card { sql_module_card #first instance } Huntgoup contract { sql_module_contract #second instance } } We're going to use CiscoAS53 as access server for contract clients (they use billing based on PostgreSQL) and for prepaid card clients (they use remote Oracle DB server), so we need absolutely different techniques for auth&acct for this groups of clients. 2. How to specify huntgoups, if the groups will have a same NAS-IP-Address? They even possibly will have the same Called-Station-Id... Can I use regular expression to make difference between this two groups? The cards group will have exact 14 digits in the User-Password attribute, so it's not hard to identify such users... Or I even can reserve some User-Name for the users in 'card' group, so different users will only vary on User-Password (they'll enter their pin-code here). Thanks a lot for any comments. If it's not possible to split this groups of users into different groups, we have to configure up another access number in CiscoAS, and confugure two radius-servers, and say to end-users to use phone number1 if they have contract with login/password or phone number2, if they use prepaid card... :/ -- Ruslan A Dautkhanov

1 0