January 2006 - Freeradius-Users - lists.freeradius.org

RE: wireless - freeradius - MS ldap
by Alhagie Puye 03 Jan '06

03 Jan '06

John, People are *trying* to help you but you helping us help you. Please follow these steps and produce the output: And please don't say *I have already sent it*....... - Run "radiusd -X -A" on the FreeRADIUS server - Run "radtest radtest Passw0rd localhost 1 testing123" Now copy and paste the response from FreeRADIUS. The setup you are trying to achieve WORKS. I have tried it before and does work. Alhagie Puye - Network Engineer Datawave Group of Companies (604)295-1817 > >-----Original Message----- > >From: > >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >org > >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >eradius.org] On Behalf Of Dickson, John > >Sent: January 3, 2006 12:44 PM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >I am sorry. I received a request for the data I had already > >sent, and I ran the tests too. I will refrain. > > > >John > > > >-----Original Message----- > >From: > >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >reeradius.o > >rg] On Behalf Of Alan DeKok > >Sent: Tuesday, January 03, 2006 2:17 PM > >To: FreeRadius users mailing list > >Subject: Re: wireless - freeradius - MS ldap > > > >"Dickson, John" <JDickson2(a)mccneb.edu> wrote: > >> I sent this out earlier. > > > > Ah. Having been told that what you sent earlier is > >inadequate, your response is to re-send it. > > > > It's OK that you're a beginner. It's *not* OK to not read > >the FAQ or documentation which describe exactly how to test > >the server. > > > > Alan DeKok. > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change. We will use alternate communication means upon request.

1 0

Pix 535 Auth issues with Pix 7.0......
by Sills, Tripp 03 Jan '06

03 Jan '06

Folks, I am using a Pix 535 running version 7.0. I can authenticate when I run the aaa-server test command from the CLI on the Pix but when I use it through the VPN client it kicks back a reject. I noticed that one debug of the freeRADIUS server Says Auth type : System and the other says Auth type : Local. The local authentication happens when I go from the CLI. The system happens when I go from the client. Any help would be appreciated. Not sure why the force there. Tripp

1 0

RE: wireless - freeradius - MS ldap
by Dickson, John 03 Jan '06

03 Jan '06

I sent this out earlier. John [root@magellan john]# /usr/local/sbin/radiusd -X -A Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "nobody" main: group = "nobody" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded LDAP ldap: server = "ssotest.mccsso.mccneb.edu" ldap: port = 389 ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: identity = "dmadmin1"" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "rDkf@mh" ldap: basedn = "ou=Metro users,dc=mccsso,dc=mccneb,dc=edu" ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "(null)" ldap: password_attribute = "(null)" ldap: access_attr = "dialupAccess" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=Gr oupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port conns: 0x8d5c4d0 Module: Instantiated ldap (ldap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. -----Original Message----- From: freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org [mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.freeradius.o rg] On Behalf Of Alhagie Puye Sent: Tuesday, January 03, 2006 1:16 PM To: FreeRadius users mailing list Subject: RE: wireless - freeradius - MS ldap John, Just run "radiusd -X -A" on the FreeRADIUS server and then try athenticating against it. You should see a lot of debug information. Send the output to the list.....that would be more helpful. Thanks, Alhagie Puye - Network Engineer Datawave Group of Companies (604)295-1817 > >-----Original Message----- > >From: > >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >org > >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >eradius.org] On Behalf Of Dickson, John > >Sent: January 3, 2006 10:58 AM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >I don't know. Ithought I was sending enouhg information. > > > >I was using this link to setup...it's my first. > >http://www.tldp.org/HOWTO/LDAP-Implementation-HOWTO/radius.html > > > >What is confusing me is where configuration is applied to receive > >requests (cisco router) and where applied to pass requests (MS ldap). > > > >-----Original Message----- > >From: > >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >reeradius.o > >rg] On Behalf Of Alan DeKok > >Sent: Tuesday, January 03, 2006 11:55 AM > >To: FreeRadius users mailing list > >Subject: Re: wireless - freeradius - MS ldap > > > >"Dickson, John" <JDickson2(a)mccneb.edu> wrote: > >> OK. In the radius.conf under module configuration I have "ldap" > >> information pointing to the LDAP server and the > >authentication fails. > > > > The debug log you posted doesn't show that. In fact, it shows > >pretty much nothing useful. You've taken care to > >*not* show the results from radtest, so all anyone can see is: > > > > a) your radius server starts > > b) radtest sends packets. > > > > They don't see: > > > > c) radiusd *receiving* packets > > d) radtest receiving a response > > > > How the heck can anyone help you without that information? > > > > Alan DeKok. > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change. We will use alternate communication means upon request. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

RE: wireless - freeradius - MS ldap
by Dickson, John 03 Jan '06

03 Jan '06

I sent this with th every first request.... I hope thi s helps. radtest radtest Passw0rd name.domain.edu 1 testing123 Sending Access-Request of id 116 to 10.1.1.27:1812 User-Name = "radtest" User-Password = "Passw0rd" NAS-IP-Address = name.domain.edu NAS-Port = John -----Original Message----- From: freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org [mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.freeradius.o rg] On Behalf Of Alhagie Puye Sent: Tuesday, January 03, 2006 2:03 PM To: FreeRadius users mailing list Subject: RE: wireless - freeradius - MS ldap Send the output ***DURING*** authentication........ The information you are sending is useless to anyone. We are interested in what the server is saying during authentication..... Alhagie Puye - Network Engineer Datawave Group of Companies (604)295-1817 > >-----Original Message----- > >From: > >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >org > >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >eradius.org] On Behalf Of Dickson, John > >Sent: January 3, 2006 11:41 AM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >I sent this out earlier. > >John > > > >[root@magellan john]# /usr/local/sbin/radiusd -X -A Starting - > >reading configuration files ... > >reread_config: reading radiusd.conf > >Config: including file: /etc/raddb/clients.conf > >Config: including file: /etc/raddb/snmp.conf > >Config: including file: /etc/raddb/eap.conf > >Config: including file: /etc/raddb/sql.conf > > main: prefix = "/usr" > > main: localstatedir = "/var" > > main: logdir = "/var/log/radius" > > main: libdir = "/usr/lib" > > main: radacctdir = "/var/log/radius/radacct" > > main: hostname_lookups = no > > main: max_request_time = 30 > > main: cleanup_delay = 5 > > main: max_requests = 1024 > > main: delete_blocked_requests = 0 > > main: port = 0 > > main: allow_core_dumps = no > > main: log_stripped_names = no > > main: log_file = "/var/log/radius/radius.log" > > main: log_auth = no > > main: log_auth_badpass = no > > main: log_auth_goodpass = no > > main: pidfile = "/var/run/radiusd/radiusd.pid" > > main: user = "nobody" > > main: group = "nobody" > > main: usercollide = no > > main: lower_user = "no" > > main: lower_pass = "no" > > main: nospace_user = "no" > > main: nospace_pass = "no" > > main: checkrad = "/usr/sbin/checkrad" > > main: proxy_requests = yes > > security: max_attributes = 200 > > security: reject_delay = 1 > > security: status_server = no > > main: debug_level = 0 > >read_config_files: reading dictionary > >read_config_files: reading naslist > >Using deprecated naslist file. Support for this will go away soon. > >read_config_files: reading clients > >read_config_files: reading realms > >radiusd: entering modules setup > >Module: Library search path is /usr/lib > >Module: Loaded exec > > exec: wait = yes > > exec: program = "(null)" > > exec: input_pairs = "request" > > exec: output_pairs = "(null)" > > exec: packet_type = "(null)" > >rlm_exec: Wait=yes but no output defined. Did you mean output=none? > >Module: Instantiated exec (exec) > >Module: Loaded expr > >Module: Instantiated expr (expr) > >Module: Loaded LDAP > > ldap: server = "ssotest.mccsso.mccneb.edu" > > ldap: port = 389 > > ldap: net_timeout = 1 > > ldap: timeout = 4 > > ldap: timelimit = 3 > > ldap: identity = "dmadmin1"" > > ldap: tls_mode = no > > ldap: start_tls = no > > ldap: tls_cacertfile = "(null)" > > ldap: tls_cacertdir = "(null)" > > ldap: tls_certfile = "(null)" > > ldap: tls_keyfile = "(null)" > > ldap: tls_randfile = "(null)" > > ldap: tls_require_cert = "allow" > > ldap: password = "rDkf@mh" > > ldap: basedn = "ou=Metro users,dc=mccsso,dc=mccneb,dc=edu" > > ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" > > ldap: base_filter = "(objectclass=radiusprofile)" > > ldap: default_profile = "(null)" > > ldap: profile_attribute = "(null)" > > ldap: password_header = "(null)" > > ldap: password_attribute = "(null)" > > ldap: access_attr = "dialupAccess" > > ldap: groupname_attribute = "cn" > > ldap: groupmembership_filter = > >"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(obj > >ectClass=Gr > >oupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" > > ldap: groupmembership_attribute = "(null)" > > ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" > > ldap: ldap_debug = 0 > > ldap: ldap_connections_number = 5 > > ldap: compare_check_items = no > > ldap: access_attr_used_for_allow = yes > > ldap: do_xlat = yes > >rlm_ldap: Registering ldap_groupcmp for Ldap-Group > >rlm_ldap: Registering ldap_xlat with xlat_name ldap > >rlm_ldap: reading ldap<->radius mappings from file > >/etc/raddb/ldap.attrmap > >rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ > >rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ > >rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type > >rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS > >Simultaneous-Use > >rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS > >Called-Station-Id > >rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS > >Calling-Station-Id > >rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password > >rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password > >rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT > >rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration > >rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type > >rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol > >rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS > >Framed-IP-Address > >rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS > >Framed-IP-Netmask > >rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route > >rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing > >rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id > >rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU > >rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS > >Framed-Compression > >rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host > >rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service > >rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port > >rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number > >rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id > >rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS > >Framed-IPX-Network > >rlm_ldap: LDAP radiusClass mapped to RADIUS Class > >rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout > >rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout > >rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS > >Termination-Action > >rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS > >Login-LAT-Service > >rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node > >rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group > >rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS > >Framed-AppleTalk-Link > >rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS > >Framed-AppleTalk-Network > >rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS > >Framed-AppleTalk-Zone > >rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit > >rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port > >conns: 0x8d5c4d0 > >Module: Instantiated ldap (ldap) > >Module: Loaded preprocess > > preprocess: huntgroups = "/etc/raddb/huntgroups" > > preprocess: hints = "/etc/raddb/hints" > > preprocess: with_ascend_hack = no > > preprocess: ascend_channels_per_line = 23 > > preprocess: with_ntdomain_hack = no > > preprocess: with_specialix_jetstream_hack = no > > preprocess: with_cisco_vsa_hack = no > >Module: Instantiated preprocess (preprocess) > >Module: Loaded Acct-Unique-Session-Id > > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > >Client-IP-Address, NAS-Port" > >Module: Instantiated acct_unique (acct_unique) > >Module: Loaded realm > > realm: format = "suffix" > > realm: delimiter = "@" > > realm: ignore_default = no > > realm: ignore_null = no > >Module: Instantiated realm (suffix) > >Module: Loaded files > > files: usersfile = "/etc/raddb/users" > > files: acctusersfile = "/etc/raddb/acct_users" > > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > > files: compat = "no" > >Module: Instantiated files (files) > >Module: Loaded detail > > detail: detailfile = > >"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > > detail: detailperm = 384 > > detail: dirperm = 493 > > detail: locking = no > >Module: Instantiated detail (detail) > >Module: Loaded System > > unix: cache = no > > unix: passwd = "(null)" > > unix: shadow = "/etc/shadow" > > unix: group = "(null)" > > unix: radwtmp = "/var/log/radius/radwtmp" > > unix: usegroup = no > > unix: cache_reload = 600 > >Module: Instantiated unix (unix) > >Module: Loaded radutmp > > radutmp: filename = "/var/log/radius/radutmp" > > radutmp: username = "%{User-Name}" > > radutmp: case_sensitive = yes > > radutmp: check_with_nas = yes > > radutmp: perm = 384 > > radutmp: callerid = yes > >Module: Instantiated radutmp (radutmp) > >Module: Loaded eap > > eap: default_eap_type = "md5" > > eap: timer_expire = 60 > > eap: ignore_unknown_eap_types = no > > eap: cisco_accounting_username_bug = no > >rlm_eap: Loaded and initialized type md5 > >rlm_eap: Loaded and initialized type leap > > gtc: challenge = "Password: " > > gtc: auth_type = "PAP" > >rlm_eap: Loaded and initialized type gtc > > mschapv2: with_ntdomain_hack = no > >rlm_eap: Loaded and initialized type mschapv2 > >Module: Instantiated eap (eap) > >Listening on authentication *:1812 > >Listening on accounting *:1813 > >Ready to process requests. > > > >-----Original Message----- > >From: > >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >reeradius.o > >rg] On Behalf Of Alhagie Puye > >Sent: Tuesday, January 03, 2006 1:16 PM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >John, > > > >Just run "radiusd -X -A" on the FreeRADIUS server and then try > >athenticating against it. > > > >You should see a lot of debug information. Send the output to the > >list.....that would be more helpful. > > > >Thanks, > > > >Alhagie Puye - Network Engineer > >Datawave Group of Companies > >(604)295-1817 > > > >> >-----Original Message----- > >> >From: > >> >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >> >org > >> >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >> >eradius.org] On Behalf Of Dickson, John > >> >Sent: January 3, 2006 10:58 AM > >> >To: FreeRadius users mailing list > >> >Subject: RE: wireless - freeradius - MS ldap > >> > > >> >I don't know. Ithought I was sending enouhg information. > >> > > >> >I was using this link to setup...it's my first. > >> >http://www.tldp.org/HOWTO/LDAP-Implementation-HOWTO/radius.html > >> > > >> >What is confusing me is where configuration is applied to receive > >> >requests (cisco router) and where applied to pass > >requests (MS ldap). > >> > > >> >-----Original Message----- > >> >From: > >> >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >> >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >> >reeradius.o > >> >rg] On Behalf Of Alan DeKok > >> >Sent: Tuesday, January 03, 2006 11:55 AM > >> >To: FreeRadius users mailing list > >> >Subject: Re: wireless - freeradius - MS ldap > >> > > >> >"Dickson, John" <JDickson2(a)mccneb.edu> wrote: > >> >> OK. In the radius.conf under module configuration I have "ldap" > >> >> information pointing to the LDAP server and the > >> >authentication fails. > >> > > >> > The debug log you posted doesn't show that. In fact, it shows > >> >pretty much nothing useful. You've taken care to > >> >*not* show the results from radtest, so all anyone can see is: > >> > > >> > a) your radius server starts > >> > b) radtest sends packets. > >> > > >> > They don't see: > >> > > >> > c) radiusd *receiving* packets > >> > d) radtest receiving a response > >> > > >> > How the heck can anyone help you without that information? > >> > > >> > Alan DeKok. > >> >- > >> >List info/subscribe/unsubscribe? See > >> >http://www.freeradius.org/list/users.html > >> > > >> >- > >> >List info/subscribe/unsubscribe? See > >> >http://www.freeradius.org/list/users.html > >> > > > > > > >This message (including any attachments) is confidential, may be > >privileged and is only intended for the person to whom it is > >addressed. > >If you have received it by mistake please notify the sender by return > >e-mail and delete this message from your system. > >Any unauthorized use or dissemination of this message in whole or in > >part is strictly prohibited. E-mail communications are inherently > >vulnerable to interception by unauthorized parties and are > >susceptible to change. We will use alternate communication means > >upon request. > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change. We will use alternate communication means upon request. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

RE: wireless - freeradius - MS ldap
by Alhagie Puye 03 Jan '06

03 Jan '06

Send the output ***DURING*** authentication........ The information you are sending is useless to anyone. We are interested in what the server is saying during authentication..... Alhagie Puye - Network Engineer Datawave Group of Companies (604)295-1817 > >-----Original Message----- > >From: > >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >org > >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >eradius.org] On Behalf Of Dickson, John > >Sent: January 3, 2006 11:41 AM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >I sent this out earlier. > >John > > > >[root@magellan john]# /usr/local/sbin/radiusd -X -A > >Starting - reading configuration files ... > >reread_config: reading radiusd.conf > >Config: including file: /etc/raddb/clients.conf > >Config: including file: /etc/raddb/snmp.conf > >Config: including file: /etc/raddb/eap.conf > >Config: including file: /etc/raddb/sql.conf > > main: prefix = "/usr" > > main: localstatedir = "/var" > > main: logdir = "/var/log/radius" > > main: libdir = "/usr/lib" > > main: radacctdir = "/var/log/radius/radacct" > > main: hostname_lookups = no > > main: max_request_time = 30 > > main: cleanup_delay = 5 > > main: max_requests = 1024 > > main: delete_blocked_requests = 0 > > main: port = 0 > > main: allow_core_dumps = no > > main: log_stripped_names = no > > main: log_file = "/var/log/radius/radius.log" > > main: log_auth = no > > main: log_auth_badpass = no > > main: log_auth_goodpass = no > > main: pidfile = "/var/run/radiusd/radiusd.pid" > > main: user = "nobody" > > main: group = "nobody" > > main: usercollide = no > > main: lower_user = "no" > > main: lower_pass = "no" > > main: nospace_user = "no" > > main: nospace_pass = "no" > > main: checkrad = "/usr/sbin/checkrad" > > main: proxy_requests = yes > > security: max_attributes = 200 > > security: reject_delay = 1 > > security: status_server = no > > main: debug_level = 0 > >read_config_files: reading dictionary > >read_config_files: reading naslist > >Using deprecated naslist file. Support for this will go away soon. > >read_config_files: reading clients > >read_config_files: reading realms > >radiusd: entering modules setup > >Module: Library search path is /usr/lib > >Module: Loaded exec > > exec: wait = yes > > exec: program = "(null)" > > exec: input_pairs = "request" > > exec: output_pairs = "(null)" > > exec: packet_type = "(null)" > >rlm_exec: Wait=yes but no output defined. Did you mean output=none? > >Module: Instantiated exec (exec) > >Module: Loaded expr > >Module: Instantiated expr (expr) > >Module: Loaded LDAP > > ldap: server = "ssotest.mccsso.mccneb.edu" > > ldap: port = 389 > > ldap: net_timeout = 1 > > ldap: timeout = 4 > > ldap: timelimit = 3 > > ldap: identity = "dmadmin1"" > > ldap: tls_mode = no > > ldap: start_tls = no > > ldap: tls_cacertfile = "(null)" > > ldap: tls_cacertdir = "(null)" > > ldap: tls_certfile = "(null)" > > ldap: tls_keyfile = "(null)" > > ldap: tls_randfile = "(null)" > > ldap: tls_require_cert = "allow" > > ldap: password = "rDkf@mh" > > ldap: basedn = "ou=Metro users,dc=mccsso,dc=mccneb,dc=edu" > > ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" > > ldap: base_filter = "(objectclass=radiusprofile)" > > ldap: default_profile = "(null)" > > ldap: profile_attribute = "(null)" > > ldap: password_header = "(null)" > > ldap: password_attribute = "(null)" > > ldap: access_attr = "dialupAccess" > > ldap: groupname_attribute = "cn" > > ldap: groupmembership_filter = > >"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(obj > >ectClass=Gr > >oupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" > > ldap: groupmembership_attribute = "(null)" > > ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" > > ldap: ldap_debug = 0 > > ldap: ldap_connections_number = 5 > > ldap: compare_check_items = no > > ldap: access_attr_used_for_allow = yes > > ldap: do_xlat = yes > >rlm_ldap: Registering ldap_groupcmp for Ldap-Group > >rlm_ldap: Registering ldap_xlat with xlat_name ldap > >rlm_ldap: reading ldap<->radius mappings from file > >/etc/raddb/ldap.attrmap > >rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ > >rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ > >rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type > >rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS > >Simultaneous-Use > >rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS > >Called-Station-Id > >rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS > >Calling-Station-Id > >rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password > >rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password > >rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT > >rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration > >rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type > >rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol > >rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS > >Framed-IP-Address > >rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS > >Framed-IP-Netmask > >rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route > >rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing > >rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id > >rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU > >rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS > >Framed-Compression > >rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host > >rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service > >rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port > >rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number > >rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id > >rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS > >Framed-IPX-Network > >rlm_ldap: LDAP radiusClass mapped to RADIUS Class > >rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout > >rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout > >rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS > >Termination-Action > >rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS > >Login-LAT-Service > >rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node > >rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group > >rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS > >Framed-AppleTalk-Link > >rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS > >Framed-AppleTalk-Network > >rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS > >Framed-AppleTalk-Zone > >rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit > >rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port > >conns: 0x8d5c4d0 > >Module: Instantiated ldap (ldap) > >Module: Loaded preprocess > > preprocess: huntgroups = "/etc/raddb/huntgroups" > > preprocess: hints = "/etc/raddb/hints" > > preprocess: with_ascend_hack = no > > preprocess: ascend_channels_per_line = 23 > > preprocess: with_ntdomain_hack = no > > preprocess: with_specialix_jetstream_hack = no > > preprocess: with_cisco_vsa_hack = no > >Module: Instantiated preprocess (preprocess) > >Module: Loaded Acct-Unique-Session-Id > > acct_unique: key = "User-Name, Acct-Session-Id, > >NAS-IP-Address, Client-IP-Address, NAS-Port" > >Module: Instantiated acct_unique (acct_unique) > >Module: Loaded realm > > realm: format = "suffix" > > realm: delimiter = "@" > > realm: ignore_default = no > > realm: ignore_null = no > >Module: Instantiated realm (suffix) > >Module: Loaded files > > files: usersfile = "/etc/raddb/users" > > files: acctusersfile = "/etc/raddb/acct_users" > > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > > files: compat = "no" > >Module: Instantiated files (files) > >Module: Loaded detail > > detail: detailfile = > >"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > > detail: detailperm = 384 > > detail: dirperm = 493 > > detail: locking = no > >Module: Instantiated detail (detail) > >Module: Loaded System > > unix: cache = no > > unix: passwd = "(null)" > > unix: shadow = "/etc/shadow" > > unix: group = "(null)" > > unix: radwtmp = "/var/log/radius/radwtmp" > > unix: usegroup = no > > unix: cache_reload = 600 > >Module: Instantiated unix (unix) > >Module: Loaded radutmp > > radutmp: filename = "/var/log/radius/radutmp" > > radutmp: username = "%{User-Name}" > > radutmp: case_sensitive = yes > > radutmp: check_with_nas = yes > > radutmp: perm = 384 > > radutmp: callerid = yes > >Module: Instantiated radutmp (radutmp) > >Module: Loaded eap > > eap: default_eap_type = "md5" > > eap: timer_expire = 60 > > eap: ignore_unknown_eap_types = no > > eap: cisco_accounting_username_bug = no > >rlm_eap: Loaded and initialized type md5 > >rlm_eap: Loaded and initialized type leap > > gtc: challenge = "Password: " > > gtc: auth_type = "PAP" > >rlm_eap: Loaded and initialized type gtc > > mschapv2: with_ntdomain_hack = no > >rlm_eap: Loaded and initialized type mschapv2 > >Module: Instantiated eap (eap) > >Listening on authentication *:1812 > >Listening on accounting *:1813 > >Ready to process requests. > > > >-----Original Message----- > >From: > >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >reeradius.o > >rg] On Behalf Of Alhagie Puye > >Sent: Tuesday, January 03, 2006 1:16 PM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >John, > > > >Just run "radiusd -X -A" on the FreeRADIUS server and then > >try athenticating against it. > > > >You should see a lot of debug information. Send the output > >to the list.....that would be more helpful. > > > >Thanks, > > > >Alhagie Puye - Network Engineer > >Datawave Group of Companies > >(604)295-1817 > > > >> >-----Original Message----- > >> >From: > >> >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >> >org > >> >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >> >eradius.org] On Behalf Of Dickson, John > >> >Sent: January 3, 2006 10:58 AM > >> >To: FreeRadius users mailing list > >> >Subject: RE: wireless - freeradius - MS ldap > >> > > >> >I don't know. Ithought I was sending enouhg information. > >> > > >> >I was using this link to setup...it's my first. > >> >http://www.tldp.org/HOWTO/LDAP-Implementation-HOWTO/radius.html > >> > > >> >What is confusing me is where configuration is applied to receive > >> >requests (cisco router) and where applied to pass > >requests (MS ldap). > >> > > >> >-----Original Message----- > >> >From: > >> >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >> >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >> >reeradius.o > >> >rg] On Behalf Of Alan DeKok > >> >Sent: Tuesday, January 03, 2006 11:55 AM > >> >To: FreeRadius users mailing list > >> >Subject: Re: wireless - freeradius - MS ldap > >> > > >> >"Dickson, John" <JDickson2(a)mccneb.edu> wrote: > >> >> OK. In the radius.conf under module configuration I have "ldap" > >> >> information pointing to the LDAP server and the > >> >authentication fails. > >> > > >> > The debug log you posted doesn't show that. In fact, it shows > >> >pretty much nothing useful. You've taken care to > >> >*not* show the results from radtest, so all anyone can see is: > >> > > >> > a) your radius server starts > >> > b) radtest sends packets. > >> > > >> > They don't see: > >> > > >> > c) radiusd *receiving* packets > >> > d) radtest receiving a response > >> > > >> > How the heck can anyone help you without that information? > >> > > >> > Alan DeKok. > >> >- > >> >List info/subscribe/unsubscribe? See > >> >http://www.freeradius.org/list/users.html > >> > > >> >- > >> >List info/subscribe/unsubscribe? See > >> >http://www.freeradius.org/list/users.html > >> > > > > > > >This message (including any attachments) is confidential, > >may be privileged and is only intended for the person to > >whom it is addressed. > >If you have received it by mistake please notify the sender > >by return e-mail and delete this message from your system. > >Any unauthorized use or dissemination of this message in > >whole or in part is strictly prohibited. E-mail > >communications are inherently vulnerable to interception by > >unauthorized parties and are susceptible to change. We will > >use alternate communication means upon request. > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change. We will use alternate communication means upon request.

1 0

RE: wireless - freeradius - MS ldap
by Alhagie Puye 03 Jan '06

03 Jan '06

John, Just run "radiusd -X -A" on the FreeRADIUS server and then try athenticating against it. You should see a lot of debug information. Send the output to the list.....that would be more helpful. Thanks, Alhagie Puye - Network Engineer Datawave Group of Companies (604)295-1817 > >-----Original Message----- > >From: > >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >org > >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >eradius.org] On Behalf Of Dickson, John > >Sent: January 3, 2006 10:58 AM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >I don't know. Ithought I was sending enouhg information. > > > >I was using this link to setup...it's my first. > >http://www.tldp.org/HOWTO/LDAP-Implementation-HOWTO/radius.html > > > >What is confusing me is where configuration is applied to > >receive requests (cisco router) and where applied to pass > >requests (MS ldap). > > > >-----Original Message----- > >From: > >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >reeradius.o > >rg] On Behalf Of Alan DeKok > >Sent: Tuesday, January 03, 2006 11:55 AM > >To: FreeRadius users mailing list > >Subject: Re: wireless - freeradius - MS ldap > > > >"Dickson, John" <JDickson2(a)mccneb.edu> wrote: > >> OK. In the radius.conf under module configuration I have "ldap" > >> information pointing to the LDAP server and the > >authentication fails. > > > > The debug log you posted doesn't show that. In fact, it > >shows pretty much nothing useful. You've taken care to > >*not* show the results from radtest, so all anyone can see is: > > > > a) your radius server starts > > b) radtest sends packets. > > > > They don't see: > > > > c) radiusd *receiving* packets > > d) radtest receiving a response > > > > How the heck can anyone help you without that information? > > > > Alan DeKok. > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change. We will use alternate communication means upon request.

1 0

RE: wireless - freeradius - MS ldap
by Dickson, John 03 Jan '06

03 Jan '06

I don't know. Ithought I was sending enouhg information. I was using this link to setup...it's my first. http://www.tldp.org/HOWTO/LDAP-Implementation-HOWTO/radius.html What is confusing me is where configuration is applied to receive requests (cisco router) and where applied to pass requests (MS ldap). -----Original Message----- From: freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org [mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.freeradius.o rg] On Behalf Of Alan DeKok Sent: Tuesday, January 03, 2006 11:55 AM To: FreeRadius users mailing list Subject: Re: wireless - freeradius - MS ldap "Dickson, John" <JDickson2(a)mccneb.edu> wrote: > OK. In the radius.conf under module configuration I have "ldap" > information pointing to the LDAP server and the authentication fails. The debug log you posted doesn't show that. In fact, it shows pretty much nothing useful. You've taken care to *not* show the results from radtest, so all anyone can see is: a) your radius server starts b) radtest sends packets. They don't see: c) radiusd *receiving* packets d) radtest receiving a response How the heck can anyone help you without that information? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

RE: wireless - freeradius - MS ldap
by Dickson, John 03 Jan '06

03 Jan '06

OK. In the radius.conf under module configuration I have "ldap" information pointing to the LDAP server and the authentication fails. First I run: /usr/local/sbin/radiusd -X -A With: [root@magellan john]# /usr/local/sbin/radiusd -X -A Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "nobody" main: group = "nobody" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded LDAP ldap: server = "ssotest.mccsso.mccneb.edu" ldap: port = 389 ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: identity = "dmadmin1"" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "rDkf@mh" ldap: basedn = "ou=Metro users,dc=mccsso,dc=mccneb,dc=edu" ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "(null)" ldap: password_attribute = "(null)" ldap: access_attr = "dialupAccess" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=Gr oupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port conns: 0x8d5c4d0 Module: Instantiated ldap (ldap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. radtest radtest Passw0rd name.domain.edu 1 testing123 Sending Access-Request of id 116 to 10.1.1.27:1812 User-Name = "radtest" User-Password = "Passw0rd" NAS-IP-Address = name.domain.edu NAS-Port = -----Original Message----- From: freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org [mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.freeradius.o rg] On Behalf Of Alan DeKok Sent: Monday, January 02, 2006 4:56 PM To: FreeRadius users mailing list Subject: Re: wireless - freeradius - MS ldap "Dickson, John" <JDickson2(a)mccneb.edu> wrote: > I am looking for a little direction configuring a Freeradius server > that will authenticate wireless clients from Cisco to MS LDAP. > > 1.Wireless - 2.Cisco - 3.Radius - 4.Windows LDAP > > Looking to see if someone has already done this. Lots of people. See radiusd.conf. Look for "windows domain". Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

Interesting EAP-TLS condition, any insights?
by Timothy J. Miller 03 Jan '06

03 Jan '06

This is a neat one. EAP-TLS is working just fine between an XP supplicant, a Cisco AP1200 WAP running 12.3(4)JA, and FreeRADIUS 1.0.1 (plus a patch to allow multiple root CAs for EAP-TLS trust). Client certificates are on smartcards, and the AP has a reauthentication timer set, with the intent that clients will be kicked off the WLAN (eventually) when the card is removed (since without the card reauthentication can't complete). Only it doesn't seem to work that way. What appears to happen is this: The authentication starts but never completes, since the client can't complete the TLS handshake without the smartcard inserted (and PIN entered). FreeRADIUS blocks at the "Requiring client certificate" step, as I would expect. However, the AP holds the authentication pending but *leaves the client fully connected*. This means that as long as an incomplete reauthentication is pending, a previously-authenticated client remains online. Not the effect I was looking for. The Cisco AP has an optional setting for RADIUS timeout, but this only seems to apply for the initial packet; since the RADIUS server responded to the initial access-request, that timeout doesn't apply. I tried ramping down max_request_time and setting delete_blocked_requests to yes, but it didn't have any effect; FreeRADIUS never sends an access-reject. There appear to be no controls on XP to force a complete deauthentication after a timeout that I can find. Will porting forward to current rev address this, or does anyone else have an insight? -- Tim

3 6

RE: wireless - freeradius - MS ldap
by Alhagie Puye 03 Jan '06

03 Jan '06

Where is the rest of the debug output from the radius server? That portion would be more helpful in trying to determine the problem... Thanks, Alhagie Puye - Network Engineer Datawave Group of Companies (604)295-1817 > >-----Original Message----- > >From: > >freeradius-users-bounces+apuye=datawave.com(a)lists.freeradius. > >org > >[mailto:freeradius-users-bounces+apuye=datawave.com@lists.fre > >eradius.org] On Behalf Of Dickson, John > >Sent: January 3, 2006 9:03 AM > >To: FreeRadius users mailing list > >Subject: RE: wireless - freeradius - MS ldap > > > >OK. In the radius.conf under module configuration I have "ldap" > >information pointing to the LDAP server and the authentication fails. > >First I run: > > /usr/local/sbin/radiusd -X -A > >With: > > > >[root@magellan john]# /usr/local/sbin/radiusd -X -A > >Starting - reading configuration files ... > >reread_config: reading radiusd.conf > >Config: including file: /etc/raddb/clients.conf > >Config: including file: /etc/raddb/snmp.conf > >Config: including file: /etc/raddb/eap.conf > >Config: including file: /etc/raddb/sql.conf > > main: prefix = "/usr" > > main: localstatedir = "/var" > > main: logdir = "/var/log/radius" > > main: libdir = "/usr/lib" > > main: radacctdir = "/var/log/radius/radacct" > > main: hostname_lookups = no > > main: max_request_time = 30 > > main: cleanup_delay = 5 > > main: max_requests = 1024 > > main: delete_blocked_requests = 0 > > main: port = 0 > > main: allow_core_dumps = no > > main: log_stripped_names = no > > main: log_file = "/var/log/radius/radius.log" > > main: log_auth = no > > main: log_auth_badpass = no > > main: log_auth_goodpass = no > > main: pidfile = "/var/run/radiusd/radiusd.pid" > > main: user = "nobody" > > main: group = "nobody" > > main: usercollide = no > > main: lower_user = "no" > > main: lower_pass = "no" > > main: nospace_user = "no" > > main: nospace_pass = "no" > > main: checkrad = "/usr/sbin/checkrad" > > main: proxy_requests = yes > > security: max_attributes = 200 > > security: reject_delay = 1 > > security: status_server = no > > main: debug_level = 0 > >read_config_files: reading dictionary > >read_config_files: reading naslist > >Using deprecated naslist file. Support for this will go away soon. > >read_config_files: reading clients > >read_config_files: reading realms > >radiusd: entering modules setup > >Module: Library search path is /usr/lib > >Module: Loaded exec > > exec: wait = yes > > exec: program = "(null)" > > exec: input_pairs = "request" > > exec: output_pairs = "(null)" > > exec: packet_type = "(null)" > >rlm_exec: Wait=yes but no output defined. Did you mean output=none? > >Module: Instantiated exec (exec) > >Module: Loaded expr > >Module: Instantiated expr (expr) > >Module: Loaded LDAP > > ldap: server = "ssotest.mccsso.mccneb.edu" > > ldap: port = 389 > > ldap: net_timeout = 1 > > ldap: timeout = 4 > > ldap: timelimit = 3 > > ldap: identity = "dmadmin1"" > > ldap: tls_mode = no > > ldap: start_tls = no > > ldap: tls_cacertfile = "(null)" > > ldap: tls_cacertdir = "(null)" > > ldap: tls_certfile = "(null)" > > ldap: tls_keyfile = "(null)" > > ldap: tls_randfile = "(null)" > > ldap: tls_require_cert = "allow" > > ldap: password = "rDkf@mh" > > ldap: basedn = "ou=Metro users,dc=mccsso,dc=mccneb,dc=edu" > > ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" > > ldap: base_filter = "(objectclass=radiusprofile)" > > ldap: default_profile = "(null)" > > ldap: profile_attribute = "(null)" > > ldap: password_header = "(null)" > > ldap: password_attribute = "(null)" > > ldap: access_attr = "dialupAccess" > > ldap: groupname_attribute = "cn" > > ldap: groupmembership_filter = > >"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(obj > >ectClass=Gr > >oupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" > > ldap: groupmembership_attribute = "(null)" > > ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" > > ldap: ldap_debug = 0 > > ldap: ldap_connections_number = 5 > > ldap: compare_check_items = no > > ldap: access_attr_used_for_allow = yes > > ldap: do_xlat = yes > >rlm_ldap: Registering ldap_groupcmp for Ldap-Group > >rlm_ldap: Registering ldap_xlat with xlat_name ldap > >rlm_ldap: reading ldap<->radius mappings from file > >/etc/raddb/ldap.attrmap > >rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ > >rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ > >rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type > >rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS > >Simultaneous-Use > >rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS > >Called-Station-Id > >rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS > >Calling-Station-Id > >rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password > >rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password > >rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT > >rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration > >rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type > >rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol > >rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS > >Framed-IP-Address > >rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS > >Framed-IP-Netmask > >rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route > >rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing > >rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id > >rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU > >rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS > >Framed-Compression > >rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host > >rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service > >rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port > >rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number > >rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id > >rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS > >Framed-IPX-Network > >rlm_ldap: LDAP radiusClass mapped to RADIUS Class > >rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout > >rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout > >rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS > >Termination-Action > >rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS > >Login-LAT-Service > >rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node > >rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group > >rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS > >Framed-AppleTalk-Link > >rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS > >Framed-AppleTalk-Network > >rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS > >Framed-AppleTalk-Zone > >rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit > >rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port > >conns: 0x8d5c4d0 > >Module: Instantiated ldap (ldap) > >Module: Loaded preprocess > > preprocess: huntgroups = "/etc/raddb/huntgroups" > > preprocess: hints = "/etc/raddb/hints" > > preprocess: with_ascend_hack = no > > preprocess: ascend_channels_per_line = 23 > > preprocess: with_ntdomain_hack = no > > preprocess: with_specialix_jetstream_hack = no > > preprocess: with_cisco_vsa_hack = no > >Module: Instantiated preprocess (preprocess) > >Module: Loaded Acct-Unique-Session-Id > > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > >Client-IP-Address, NAS-Port" > >Module: Instantiated acct_unique (acct_unique) > >Module: Loaded realm > > realm: format = "suffix" > > realm: delimiter = "@" > > realm: ignore_default = no > > realm: ignore_null = no > >Module: Instantiated realm (suffix) > >Module: Loaded files > > files: usersfile = "/etc/raddb/users" > > files: acctusersfile = "/etc/raddb/acct_users" > > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > > files: compat = "no" > >Module: Instantiated files (files) > >Module: Loaded detail > > detail: detailfile = > >"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > > detail: detailperm = 384 > > detail: dirperm = 493 > > detail: locking = no > >Module: Instantiated detail (detail) > >Module: Loaded System > > unix: cache = no > > unix: passwd = "(null)" > > unix: shadow = "/etc/shadow" > > unix: group = "(null)" > > unix: radwtmp = "/var/log/radius/radwtmp" > > unix: usegroup = no > > unix: cache_reload = 600 > >Module: Instantiated unix (unix) > >Module: Loaded radutmp > > radutmp: filename = "/var/log/radius/radutmp" > > radutmp: username = "%{User-Name}" > > radutmp: case_sensitive = yes > > radutmp: check_with_nas = yes > > radutmp: perm = 384 > > radutmp: callerid = yes > >Module: Instantiated radutmp (radutmp) > >Module: Loaded eap > > eap: default_eap_type = "md5" > > eap: timer_expire = 60 > > eap: ignore_unknown_eap_types = no > > eap: cisco_accounting_username_bug = no > >rlm_eap: Loaded and initialized type md5 > >rlm_eap: Loaded and initialized type leap > > gtc: challenge = "Password: " > > gtc: auth_type = "PAP" > >rlm_eap: Loaded and initialized type gtc > > mschapv2: with_ntdomain_hack = no > >rlm_eap: Loaded and initialized type mschapv2 > >Module: Instantiated eap (eap) > >Listening on authentication *:1812 > >Listening on accounting *:1813 > >Ready to process requests. > > > > radtest radtest Passw0rd name.domain.edu 1 testing123 > > > >Sending Access-Request of id 116 to 10.1.1.27:1812 > > User-Name = "radtest" > > User-Password = "Passw0rd" > > NAS-IP-Address = name.domain.edu > > NAS-Port = > > > >-----Original Message----- > >From: > >freeradius-users-bounces+jdickson2=mccneb.edu(a)lists.freeradius.org > >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu@lists.f > >reeradius.o > >rg] On Behalf Of Alan DeKok > >Sent: Monday, January 02, 2006 4:56 PM > >To: FreeRadius users mailing list > >Subject: Re: wireless - freeradius - MS ldap > > > >"Dickson, John" <JDickson2(a)mccneb.edu> wrote: > >> I am looking for a little direction configuring a > >Freeradius server > >> that will authenticate wireless clients from Cisco to MS LDAP. > >> > >> 1.Wireless - 2.Cisco - 3.Radius - 4.Windows LDAP > >> > >> Looking to see if someone has already done this. > > > > Lots of people. See radiusd.conf. Look for "windows domain". > > > > Alan DeKok. > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change. We will use alternate communication means upon request.

1 0