December 2006 - Freeradius-Users - lists.freeradius.org

Use MS RAS as RADIUS client, FreeRADIUS got no User-Password
by Cui Jeffrey 11 Dec '06

11 Dec '06

Hello everyone, I am newbie to FreeRADIUS. Using Windows RAS (VPN server) as RADIUS client, but from output, I can see that there is no User-Password field in request from RAS at all, I am using rlm_jradius inside freeradius to forward username/password to my own authentication program. Only found one post about this issue, someone suggested to put mschap in conf file, but I am sure it's there already. Do I need to change anything on RAS side? I am using freeradius 1.1.2. Anybody can help me out? Thank you in advance Jeffrey rad_recv: Access-Request packet from host 192.168.2.151:1382, id=8, length=289 Acct-Session-Id = "108" NAS-IP-Address = 192.168.2.151 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 129 MS-RAS-Vendor = 311 MS-RAS-Version = "MSRASV5.20" NAS-Port-Type = Virtual Tunnel-Type:0 = PPTP Tunnel-Medium-Type:0 = IP Calling-Station-Id = "10.11.14.105" Tunnel-Client-Endpoint:0 = "10.11.14.105" Microsoft-Attr-35 = 0x4d5352415356352e3030 Microsoft-Attr-34 = 0x4d535241532d312d4a454646324b User-Name = "dvmh00000055(a)DVVPN.COM" MS-CHAP-Challenge = 0xe6e76c750472fb5879986d8b8e75df6e MS-CHAP2-Response = 0x0000f21eb6c0b591297af094964bb6e9417c0000000000000000f990636a5a5237f4c3456225c9c475b07004e32cb758fdf2 Message-Authenticator = 0x25fa1bd20b0a0f3fa273ae4fc66eb8d5 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' modcall[authorize]: module "mschap" returns ok for request 0 rlm_realm: Looking up realm "DVVPN.COM" for User-Name = "dvmh00000055(a)DVVPN.COM" rlm_realm: No such realm "DVVPN.COM" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 users: Matched entry DEFAULT at line 183 modcall[authorize]: module "files" returns ok for request 0 rlm_jradius: packing attribute Acct-Session-Id (type: 44; len: 3) rlm_jradius: packing attribute NAS-IP-Address (type: 4; len: 4) rlm_jradius: packing attribute Service-Type (type: 6; len: 4) rlm_jradius: packing attribute Framed-Protocol (type: 7; len: 4) rlm_jradius: packing attribute NAS-Port (type: 5; len: 4) rlm_jradius: packing attribute MS-RAS-Vendor (type: 20381705; len: 4) rlm_jradius: packing attribute MS-RAS-Version (type: 20381714; len: 10) rlm_jradius: packing attribute NAS-Port-Type (type: 61; len: 4) rlm_jradius: packing attribute Tunnel-Type (type: 64; len: 4) rlm_jradius: packing attribute Tunnel-Medium-Type (type: 65; len: 4) rlm_jradius: packing attribute Calling-Station-Id (type: 31; len: 12) rlm_jradius: packing attribute Tunnel-Client-Endpoint (type: 66; len: 12) rlm_jradius: packing attribute Microsoft-Attr-35 (type: 20381731; len: 10) rlm_jradius: packing attribute Microsoft-Attr-34 (type: 20381730; len: 14) rlm_jradius: packing attribute User-Name (type: 1; len: 22) rlm_jradius: packing attribute MS-CHAP-Challenge (type: 20381707; len: 16) rlm_jradius: packing attribute MS-CHAP2-Response (type: 20381721; len: 50) rlm_jradius: packing attribute Message-Authenticator (type: 80; len: 16) rlm_jradius: packing attribute Client-IP-Address (type: 1052; len: 4) rlm_jradius: packing packet with code: 1 (attr length: 429) rlm_jradius: packing attribute Framed-IP-Address (type: 8; len: 4) rlm_jradius: packing attribute Framed-MTU (type: 12; len: 4) rlm_jradius: packing attribute Service-Type (type: 6; len: 4) rlm_jradius: packing attribute Framed-Protocol (type: 7; len: 4) rlm_jradius: packing attribute Framed-Compression (type: 13; len: 4) rlm_jradius: packing packet with code: 0 (attr length: 80) rlm_jradius: packing attribute Auth-Type (type: 1000; len: 4) rlm_jradius: packing attribute Service-Type (type: 6; len: 4) rlm_jradius: packing attribute Framed-Protocol (type: 7; len: 4) rlm_jradius: sending 586 bytes to jradius server rlm_jradius: return code 8; receiving 2 packets rlm_jradius: reading packet: code=1 len=429 rlm_jradius: reading attribute: type=44; len=3 rlm_jradius: reading attribute: type=4; len=4 rlm_jradius: reading attribute: type=6; len=4 rlm_jradius: reading attribute: type=7; len=4 rlm_jradius: reading attribute: type=5; len=4 rlm_jradius: reading attribute: type=20381705; len=4 rlm_jradius: reading attribute: type=20381714; len=10 rlm_jradius: reading attribute: type=61; len=4 rlm_jradius: reading attribute: type=64; len=4 rlm_jradius: reading attribute: type=65; len=4 rlm_jradius: reading attribute: type=31; len=12 rlm_jradius: reading attribute: type=66; len=12 rlm_jradius: reading attribute: type=20381731; len=10 rlm_jradius: received attribute we do not recognize (type: 20381731) rlm_jradius: reading attribute: type=20381730; len=14 rlm_jradius: received attribute we do not recognize (type: 20381730) rlm_jradius: reading attribute: type=1; len=22 rlm_jradius: reading attribute: type=20381707; len=16 rlm_jradius: reading attribute: type=20381721; len=50 rlm_jradius: reading attribute: type=80; len=16 rlm_jradius: reading attribute: type=1052; len=4 rlm_jradius: reading packet: code=0 len=80 rlm_jradius: reading attribute: type=8; len=4 rlm_jradius: reading attribute: type=12; len=4 rlm_jradius: reading attribute: type=6; len=4 rlm_jradius: reading attribute: type=7; len=4 rlm_jradius: reading attribute: type=13; len=4 rlm_jradius: reading request: config_item: len=48 rlm_jradius: reading attribute: type=1000; len=4 rlm_jradius: reading attribute: type=6; len=4 rlm_jradius: reading attribute: type=7; len=4 modcall[authorize]: module "jradius" returns updated for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type auth: type "MS-CHAP" Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 0 rlm_mschap: No User-Password configured. Cannot create LM-Password. rlm_mschap: No User-Password configured. Cannot create NT-Password. rlm_mschap: Told to do MS-CHAPv2 for dvmh00000055(a)DVVPN.COM with NT-Password rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect modcall[authenticate]: module "mschap" returns reject for request 0 modcall: leaving group MS-CHAP (returns reject) for request 0 auth: Failed to validate the user. Login incorrect: [dvmh00000055(a)DVVPN.COM/<no User-Password attribute>] (from client jeff2003 port 129 cli 10.11.14.105) Found Post-Auth-Type Processing the post-auth section of radiusd.conf modcall: entering group REJECT for request 0 rlm_jradius: packing attribute Acct-Session-Id (type: 44; len: 3) rlm_jradius: packing attribute NAS-IP-Address (type: 4; len: 4) rlm_jradius: packing attribute Service-Type (type: 6; len: 4) rlm_jradius: packing attribute Framed-Protocol (type: 7; len: 4) rlm_jradius: packing attribute NAS-Port (type: 5; len: 4) rlm_jradius: packing attribute MS-RAS-Vendor (type: 20381705; len: 4) rlm_jradius: packing attribute MS-RAS-Version (type: 20381714; len: 10) rlm_jradius: packing attribute NAS-Port-Type (type: 61; len: 4) rlm_jradius: packing attribute Tunnel-Type (type: 64; len: 4) rlm_jradius: packing attribute Tunnel-Medium-Type (type: 65; len: 4) rlm_jradius: packing attribute Calling-Station-Id (type: 31; len: 12) rlm_jradius: packing attribute Tunnel-Client-Endpoint (type: 66; len: 12) rlm_jradius: packing attribute User-Name (type: 1; len: 22) rlm_jradius: packing attribute MS-CHAP-Challenge (type: 20381707; len: 16) rlm_jradius: packing attribute MS-CHAP2-Response (type: 20381721; len: 50) rlm_jradius: packing attribute Message-Authenticator (type: 80; len: 16) rlm_jradius: packing attribute Client-IP-Address (type: 1052; len: 4) rlm_jradius: packing packet with code: 1 (attr length: 381) rlm_jradius: packing attribute Framed-IP-Address (type: 8; len: 4) rlm_jradius: packing attribute Framed-MTU (type: 12; len: 4) rlm_jradius: packing attribute Service-Type (type: 6; len: 4) rlm_jradius: packing attribute Framed-Protocol (type: 7; len: 4) rlm_jradius: packing attribute Framed-Compression (type: 13; len: 4) rlm_jradius: packing attribute MS-CHAP-Error (type: 20381698; len: 10) rlm_jradius: packing packet with code: 3 (attr length: 102) rlm_jradius: packing attribute Auth-Type (type: 1000; len: 4) rlm_jradius: packing attribute Service-Type (type: 6; len: 4) rlm_jradius: packing attribute Framed-Protocol (type: 7; len: 4) rlm_jradius: packing attribute Post-Auth-Type (type: 1014; len: 4) rlm_jradius: sending 576 bytes to jradius server rlm_jradius: return code 7; receiving 2 packets rlm_jradius: reading packet: code=1 len=381 rlm_jradius: reading attribute: type=44; len=3 rlm_jradius: reading attribute: type=4; len=4 rlm_jradius: reading attribute: type=6; len=4 rlm_jradius: reading attribute: type=7; len=4 rlm_jradius: reading attribute: type=5; len=4 rlm_jradius: reading attribute: type=20381705; len=4 rlm_jradius: reading attribute: type=20381714; len=10 rlm_jradius: reading attribute: type=61; len=4 rlm_jradius: reading attribute: type=64; len=4 rlm_jradius: reading attribute: type=65; len=4 rlm_jradius: reading attribute: type=31; len=12 rlm_jradius: reading attribute: type=66; len=12 rlm_jradius: reading attribute: type=1; len=22 rlm_jradius: reading attribute: type=20381707; len=16 rlm_jradius: reading attribute: type=20381721; len=50 rlm_jradius: reading attribute: type=80; len=16 rlm_jradius: reading attribute: type=1052; len=4 rlm_jradius: reading packet: code=3 len=102 rlm_jradius: reading attribute: type=8; len=4 rlm_jradius: reading attribute: type=12; len=4 rlm_jradius: reading attribute: type=6; len=4 rlm_jradius: reading attribute: type=7; len=4 rlm_jradius: reading attribute: type=13; len=4 rlm_jradius: reading attribute: type=20381698; len=10 rlm_jradius: reading request: config_item: len=64 rlm_jradius: reading attribute: type=1000; len=4 rlm_jradius: reading attribute: type=6; len=4 rlm_jradius: reading attribute: type=7; len=4 rlm_jradius: reading attribute: type=1014; len=4 modcall[post-auth]: module "jradius" returns noop for request 0 modcall: leaving group REJECT (returns noop) for request 0 Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 8 to 192.168.2.151 port 1382 Waking up in 3 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 8 with timestamp 457dbde0 Nothing to do. Sleeping until we see a request _________________________________________________________________ 享用世界上最大的电子邮件系统― MSN Hotmail。 http://www.hotmail.com

1 0

Assertion failed in listen.c, line 621
by Guilherme Franco 11 Dec '06

11 Dec '06

Hello, Freeradius-snapshot-20061203 crashes, when running just "radiusd" with proxy ("radiusd -X" doesn't crash): It logs the following "Error: Assertion failed in listen.c, line 621", which is "rad_assert(request->proxy_listener == listener);" Thanks.

2 9

Re: Counter
by Sean 11 Dec '06

11 Dec '06

> > I can't understand why Max-Daily-Session is an unknown attribute > when > > it's declared in the radiusd.conf and radius loads with no errors. > > Because attributes are defined in the dictionaries. > > Arguably, the sqlcounter module should look up that attribute, and > either complain if it doesn't exist, or else create it. That doesn't > happen right now. > Okay, thanks Alan. Should I edit a dictionary file and if so which one? Regards, Sean

2 1

HELP WITH FREERADIUS AND DHCP3
by Tomas Eduardo Lotina Ramos 11 Dec '06

11 Dec '06

2 1

Fwd: SQL Counter
by Enrique Acosta 11 Dec '06

11 Dec '06

I have the same error message. Somebody adviced me that I have to download the latest release of freeradius . ---------- Forwarded Message ---------- Subject: SQL Counter Date: Monday 11 December 2006 02:04 pm From: Sean <sean(a)swarmhotspots.com> To: freeradius-users(a)lists.freeradius.org Hi, Sorry if this is a repeat. I'm not sure if an email I sent yesterday got through. Clearly I'm missing something simple here. I'm trying to create accounts that will renew on a daily or monthly basis. I've put this code into my radiusd.conf file to test daily renewals. $INCLUDE ${confdir}/sql.conf sqlcounter dailycounter { counter-name = Daily-Session-Time check-name = Max-Daily-Session sqlmod-inst = sql key = User-Name reset = daily query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" } I've created this account in the MySQL radcheck table. ropgis12 User-Password := gisnopum ropgis12 Simultaneous-Use:= 1 ropgis12 Max-Daily-Session := 1800 radiusd -X gives the following result. rlm_sql (sql): Reserving sql socket id: 0 rlm_sql: Failed to create the pair: Unknown attribute "Max-Daily-Session" rlm_sql (sql): Error getting data from database rlm_sql (sql): SQL query error; rejecting user rlm_sql (sql): Released sql socket id: 0 modcall[authorize]: module "sql" returns fail for request 39 modcall: group authorize returns fail for request 39 I can't understand why Max-Daily-Session is an unknown attribute when it's declared in the radiusd.conf and radius loads with no errors. As usual any help would be appreciated. Sean Bracken - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------------------------------- -- Enrique Acosta Administrador de Red en Nodo Infosur Cfgos, Cuba Est modus in rebus Linux user # 391079 http://counter.li.org

1 0

Re: Simultaneous-Use doesn't work.
by Ernie Dunbar 11 Dec '06

11 Dec '06

> Hello Ernie, > > Just wondering if you are using clients.conf at all? Yup. The way you can tell is by running `freeradius -X`, like I did. You'll see a line like this: Config: including file: /etc/freeradius/clients.conf > I need to migrate > an older freeradius 0.9x to 1.2 and notice that the newer sql setup > uses an "nas" table that was not in the older setup. We used > clients.conf for the nas's and I'm trying to figure out how/if > clients.conf gets migrated to the nas table. Did you find any > pertinent docs? Nope. The best documentation I can find is the FreeRADIUS faq on the FreeRADIUS home page. And it's out of date in this matter. > > Friday, December 1, 2006, 2:46:04 PM, you wrote: > >> I'm using FreeRADIUS 1.0.2 and its associated mysql plugin on a Debian >> 3.1 >> system. I've managed to get the server working to where our customers >> are >> authenticating out of the mysql database just fine and the accounting >> records are being stored in mysql properly too. > >> But the Simultaneous-Use configuration directive doesn't do a thing. It >> doesn't even check against radwtmp (even though the radwho command works >> fine) when someone logs on. The FAQ at >> http://www.freeradius.org/faq/#4.7.2 doesn't help any either, in no >> small >> part because it's outdated and neither raddb/naslist nor radcheck.pl >> exist >> in the new version. I don't see anything about Simultaneous-Use being >> parsed when I run 'freeradius -X' however, so that might be a clue. > >> Here's the appropriate configuration on our server: > >> clients.conf: > >> client XXX.XXX.XXX.XXX { >> secret = XXXXXX >> nastype = cisco >> login = XXXXXX >> password = XXXXXX >> shortname = dialup >> } > >> users: > >> DEFAULT Framed-Protocol == PPP, Simultaneous-Use := 1 >> Framed-Protocol = PPP, >> Service-Type = Framed-User, >> Framed-Compression = Van-Jacobson-TCP-IP > >> And finally, the output of freeradius -X: > >> ns2:/etc/freeradius# /usr/sbin/freeradius -X >> Starting - reading configuration files ... >> reread_config: reading radiusd.conf >> Config: including file: /etc/freeradius/proxy.conf >> Config: including file: /etc/freeradius/clients.conf >> Config: including file: /etc/freeradius/snmp.conf >> Config: including file: /etc/freeradius/eap.conf >> Config: including file: /etc/freeradius/sql.conf >> main: prefix = "/usr" >> main: localstatedir = "/var" >> main: logdir = "/var/log/freeradius" >> main: libdir = "/usr/lib/freeradius" >> main: radacctdir = "/var/log/freeradius/radacct" >> main: hostname_lookups = no >> main: max_request_time = 30 >> main: cleanup_delay = 5 >> main: max_requests = 256 >> main: delete_blocked_requests = 0 >> main: port = 1812 >> main: allow_core_dumps = no >> main: log_stripped_names = yes >> main: log_file = "/var/log/freeradius/radius.log" >> main: log_auth = yes >> main: log_auth_badpass = yes >> main: log_auth_goodpass = yes >> main: pidfile = "/var/run/freeradius/freeradius.pid" >> main: user = "freerad" >> main: group = "freerad" >> main: usercollide = no >> main: lower_user = "no" >> main: lower_pass = "no" >> main: nospace_user = "after" >> main: nospace_pass = "after" >> main: checkrad = "/usr/sbin/checkrad" >> main: proxy_requests = off >> security: max_attributes = 200 >> security: reject_delay = 1 >> security: status_server = no >> main: debug_level = 0 >> read_config_files: reading dictionary >> read_config_files: reading naslist >> read_config_files: reading clients >> read_config_files: reading realms >> radiusd: entering modules setup >> Module: Library search path is /usr/lib/freeradius >> Module: Loaded exec >> exec: wait = yes >> exec: program = "(null)" >> exec: input_pairs = "request" >> exec: output_pairs = "(null)" >> exec: packet_type = "(null)" >> rlm_exec: Wait=yes but no output defined. Did you mean output=none? >> Module: Instantiated exec (exec) >> Module: Loaded expr >> Module: Instantiated expr (expr) >> Module: Loaded PAP >> pap: encryption_scheme = "crypt" >> Module: Instantiated pap (pap) >> Module: Loaded MS-CHAP >> mschap: use_mppe = yes >> mschap: require_encryption = no >> mschap: require_strong = no >> mschap: with_ntdomain_hack = no >> mschap: passwd = "(null)" >> mschap: authtype = "MS-CHAP" >> mschap: ntlm_auth = "(null)" >> Module: Instantiated mschap (mschap) >> Module: Loaded System >> unix: cache = no >> unix: passwd = "(null)" >> unix: shadow = "/etc/shadow" >> unix: group = "(null)" >> unix: radwtmp = "/var/log/freeradius/radwtmp" >> unix: usegroup = no >> unix: cache_reload = 600 >> Module: Instantiated unix (unix) >> Module: Loaded preprocess >> preprocess: huntgroups = "/etc/freeradius/huntgroups" >> preprocess: hints = "/etc/freeradius/hints" >> preprocess: with_ascend_hack = no >> preprocess: ascend_channels_per_line = 23 >> preprocess: with_ntdomain_hack = no >> preprocess: with_specialix_jetstream_hack = no >> preprocess: with_cisco_vsa_hack = no >> Module: Instantiated preprocess (preprocess) >> Module: Loaded files >> files: usersfile = "/etc/freeradius/users" >> files: acctusersfile = "/etc/freeradius/acct_users" >> files: preproxy_usersfile = "/etc/freeradius/preproxy_users" >> files: compat = "no" >> Module: Instantiated files (files) >> Module: Loaded SQL >> sql: driver = "rlm_sql_mysql" >> sql: server = "localhost" >> sql: port = "" >> sql: login = "dialupacct" >> sql: password = "d8271@#1" >> sql: radius_db = "dialupacct" >> sql: acct_table = "radacct" >> sql: acct_table2 = "radacct" >> sql: authcheck_table = "radcheck" >> sql: authreply_table = "radreply" >> sql: groupcheck_table = "radgroupcheck" >> sql: groupreply_table = "radgroupreply" >> sql: usergroup_table = "usergroup" >> sql: nas_table = "nas" >> sql: dict_table = "dictionary" >> sql: sqltrace = yes >> sql: sqltracefile = "/var/log/freeradius/sqltrace.sql" >> sql: readclients = no >> sql: deletestalesessions = yes >> sql: num_sql_socks = 5 >> sql: sql_user_name = "%{User-Name}" >> sql: default_user_profile = "" >> sql: query_on_not_found = no >> sql: authorize_check_query = "SELECT >> id,UserName,Attribute,Value,op FROM >> radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" >> sql: authorize_reply_query = "SELECT >> id,UserName,Attribute,Value,op FROM >> radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" >> sql: authorize_group_check_query = "SELECT >> radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op >> FROM radgroupcheck,usergroup WHERE usergroup.Username = >> '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName >> ORDER BY radgroupcheck.id" >> sql: authorize_group_reply_query = "SELECT >> radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op >> FROM radgroupreply,usergroup WHERE usergroup.Username = >> '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName >> ORDER BY radgroupreply.id" >> sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', >> AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), >> AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = >> '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND >> NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" >> sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress = >> '%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ? >> AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets = >> '%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ? >> AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress= >> '%{NAS-IP-Address}'" >> sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, >> AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, >> AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, >> AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, >> ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) >> values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', >> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', >> '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + >> %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', >> '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', >> '%{Acct-Output-Octets}', >> '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', >> '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')" >> sql: accounting_start_query = "INSERT into radacct (AcctSessionId, >> AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, >> AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, >> ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, >> CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, >> FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) >> values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', >> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', >> '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', >> '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', >> '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', >> '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')" >> sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = >> '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = >> '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND >> UserName >> = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" >> sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', >> AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = >> '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', >> AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = >> '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE >> AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' >> AND NASIPAddress = '%{NAS-IP-Address}'" >> sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, >> AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, >> AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, >> ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, >> CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, >> FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) >> values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', >> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', >> '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + >> %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', >> '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', >> '%{Acct-Output-Octets}', '%{Called-Station-Id}', >> '%{Calling-Station-Id}', >> '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', >> '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" >> sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE >> UserName='%{SQL-User-Name}'" >> sql: connect_failure_retry_delay = 60 >> sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE >> UserName='%{SQL-User-Name}' AND AcctStopTime = 0" >> sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, >> NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, >> FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND >> AcctStopTime = 0" >> sql: postauth_table = "radpostauth" >> sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, >> date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', >> '%{reply:Packet-Type}', NOW())" >> sql: safe-characters = >> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" >> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and >> linked >> rlm_sql (sql): Attempting to connect to dialupacct@localhost:/dialupacct >> rlm_sql (sql): starting 0 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 >> rlm_sql_mysql: Starting connect to MySQL server for #0 >> rlm_sql (sql): Connected new DB handle, #0 >> rlm_sql (sql): starting 1 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 >> rlm_sql_mysql: Starting connect to MySQL server for #1 >> rlm_sql (sql): Connected new DB handle, #1 >> rlm_sql (sql): starting 2 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 >> rlm_sql_mysql: Starting connect to MySQL server for #2 >> rlm_sql (sql): Connected new DB handle, #2 >> rlm_sql (sql): starting 3 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 >> rlm_sql_mysql: Starting connect to MySQL server for #3 >> rlm_sql (sql): Connected new DB handle, #3 >> rlm_sql (sql): starting 4 >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 >> rlm_sql_mysql: Starting connect to MySQL server for #4 >> rlm_sql (sql): Connected new DB handle, #4 >> Module: Instantiated sql (sql) >> Module: Loaded realm >> realm: format = "suffix" >> realm: delimiter = "@" >> realm: ignore_default = no >> realm: ignore_null = no >> Module: Instantiated realm (suffix) >> Module: Loaded detail >> detail: detailfile = >> "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" >> detail: detailperm = 384 >> detail: dirperm = 493 >> detail: locking = no >> Module: Instantiated detail (detail) >> Module: Loaded radutmp >> radutmp: filename = "/var/log/freeradius/radutmp" >> radutmp: username = "%{User-Name}" >> radutmp: case_sensitive = yes >> radutmp: check_with_nas = yes >> radutmp: perm = 384 >> radutmp: callerid = yes >> Module: Instantiated radutmp (radutmp) >> Module: Loaded eap >> eap: default_eap_type = "md5" >> eap: timer_expire = 60 >> eap: ignore_unknown_eap_types = no >> eap: cisco_accounting_username_bug = no >> rlm_eap: Loaded and initialized type md5 >> rlm_eap: Loaded and initialized type leap >> gtc: challenge = "Password: " >> gtc: auth_type = "PAP" >> rlm_eap: Loaded and initialized type gtc >> mschapv2: with_ntdomain_hack = no >> rlm_eap: Loaded and initialized type mschapv2 >> Module: Instantiated eap (eap) >> Listening on authentication *:1812 >> Listening on accounting *:1813 >> Ready to process requests. > >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > >

2 1

SQL Counter
by Sean 11 Dec '06

11 Dec '06

Hi, Sorry if this is a repeat. I'm not sure if an email I sent yesterday got through. Clearly I'm missing something simple here. I'm trying to create accounts that will renew on a daily or monthly basis. I've put this code into my radiusd.conf file to test daily renewals. $INCLUDE ${confdir}/sql.conf sqlcounter dailycounter { counter-name = Daily-Session-Time check-name = Max-Daily-Session sqlmod-inst = sql key = User-Name reset = daily query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" } I've created this account in the MySQL radcheck table. ropgis12 User-Password := gisnopum ropgis12 Simultaneous-Use:= 1 ropgis12 Max-Daily-Session := 1800 radiusd -X gives the following result. rlm_sql (sql): Reserving sql socket id: 0 rlm_sql: Failed to create the pair: Unknown attribute "Max-Daily-Session" rlm_sql (sql): Error getting data from database rlm_sql (sql): SQL query error; rejecting user rlm_sql (sql): Released sql socket id: 0 modcall[authorize]: module "sql" returns fail for request 39 modcall: group authorize returns fail for request 39 I can't understand why Max-Daily-Session is an unknown attribute when it's declared in the radiusd.conf and radius loads with no errors. As usual any help would be appreciated. Sean Bracken

1 0

Counter
by Sean 11 Dec '06

11 Dec '06

Hi, Clearly I'm missing something simple here. I'm trying to create accounts that will renew on a daily or weekly basis. I've put this code into my radiusd.conf file $INCLUDE ${confdir}/sql.conf sqlcounter dailycounter { counter-name = Daily-Session-Time check-name = Max-Daily-Session sqlmod-inst = sql key = User-Name reset = daily query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" } I've created this account in the MySQL radcheck table. ropgis12 User-Password := gisnopum ropgis12 Simultaneous-Use:= 1 ropgis12 Max-Daily-Session := 1800 radiusd -X gives the following result. rlm_sql (sql): Reserving sql socket id: 0 rlm_sql: Failed to create the pair: Unknown attribute "Max-Daily-Session" rlm_sql (sql): Error getting data from database rlm_sql (sql): SQL query error; rejecting user rlm_sql (sql): Released sql socket id: 0 modcall[authorize]: module "sql" returns fail for request 39 modcall: group authorize returns fail for request 39 I can't understand why Max-Daily-Session is an unknown attribute when it's declared in the radiusd.conf and radius loads with no errors. As usual any help would be appreciated. Sean Bracken

2 1

HELP
by Tomas Eduardo Lotina Ramos 11 Dec '06

11 Dec '06

3 2

How to integrate Postgresql database with freeradius on Debian/Ubuntu
by TAGE 10 Dec '06

10 Dec '06

Hi, I am new to freeradius+postgresql, i am unable to authenticate users from postgresql database. When i execute script : sudo freeradius -XXX -A freeradius do not loaded postgresql modules. There is an incompatibility between freeradius and postgresql for Debian/Ubuntu ? How can i resolv this problem. Errors: Sun Dec 10 23:21:06 2006 : Error: radiusd.conf[11]: sql: Module instantiation failed. Sun Dec 10 23:21:06 2006 : Error: radiusd.conf[1845] Unknown module "sql". Sun Dec 10 23:21:06 2006 : Error: radiusd.conf[1774] Failed to parse authorize section. Kindly help me out. ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com

2 1