October 2007 - Freeradius-Users - lists.freeradius.org

Re: error with dictionary definition.
by Live Great 02 Oct '07

02 Oct '07

But have you created similar ATTRIBUTEs for readiusclient-ng's dictionary? Thanks Sam ----- Original Message ---- From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Sent: Tuesday, October 2, 2007 5:11:09 PM Subject: Re: error with dictionary definition. Live Great wrote: > Start openser recevied the following error: Why are you asking this question here? It's really an openser issue. > ERROR:acc:extra2int: <src_leg> is not a number > ERROR:acc:acc_diam_init: leg info names for DIAMTER must be integer AVP > codes I know very little about openser, but I can tell that DIAMETER is not RADIUS. FreeRADIUS doesn't do Diameter. Freeradiusclient doesn't do it, either. So my conclusion is that this problem has nothing to do with FreeRADIUS. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

Re: error with dictionary definition.
by Live Great 02 Oct '07

02 Oct '07

But have you created similar ATTRIBUTEs for readiusclient-ng's dictionary? If not, how did you set it up for accounting purpose? Thanks Sam ----- Original Message ---- From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users@lists.freeradius..org> Sent: Tuesday, October 2, 2007 5:11:09 PM Subject: Re: error with dictionary definition. Live Great wrote: > Start openser recevied the following error: Why are you asking this question here? It's really an openser issue. > ERROR:acc:extra2int: <src_leg> is not a number > ERROR:acc:acc_diam_init: leg info names for DIAMTER must be integer AVP > codes I know very little about openser, but I can tell that DIAMETER is not RADIUS. FreeRADIUS doesn't do Diameter. Freeradiusclient doesn't do it, either. So my conclusion is that this problem has nothing to do with FreeRADIUS. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

error with dictionary definition.
by Live Great 02 Oct '07

02 Oct '07

Hi, I really need help to solve this error. I have been working on it for few days, and still can't get it working. I am using the following packages in freebsd(6.2) sip server: core:radiusclient-ng # ps -auxww | grep openser root 46008 0.0 0.1 1548 1008 p5 R+ 1:41PM 0:00.00 grep openser core:radiusclient-ng # pkg_info | grep openser openser-1.2.2 A very fast and configurable SIP proxy with TLS support core:radiusclient-ng # pkg_info | grep radius freeradius-mysql-1.1.7 A free RADIUS server implementation with MySQL support radiusclient-0.5.6 Client library and basic utilities for Radius authenticated core:radiusclient-ng # pkg_info | grep proxy mediaproxy-1.8.2_1 A far-end NAT traversal solution for SER/OpenSER The problem is after merged the 2 dictionary files (cat dictionary.sip >> dictionary) and added the following lines in the radiusclient-ng/dictionary file, ATTRIBUTE Acct-Status-Type 40 integer ATTRIBUTE Service-Type 6 integer ATTRIBUTE Event-Timestamp 55 integer ATTRIBUTE Acct-Session-Id 44 string ATTRIBUTE src_leg 1 integer ATTRIBUTE dst_leg 1 integer VALUE Acct-Status-Type Start 1 VALUE Acct-Status-Type Stop 2 VALUE Acct-Status-Type Alive 3 # dup VALUE Acct-Status-Type Interim-Update 3 VALUE Acct-Status-Type Accounting-On 7 VALUE Acct-Status-Type Accounting-Off 8 VALUE Acct-Status-Type Failed 15 VALUE Service-Type Sip-Session 15 Start openser recevied the following error: ERROR:acc:extra2int: <src_leg> is not a number ERROR:acc:acc_diam_init: leg info names for DIAMTER must be integer AVP codes Can anyone please help? Thanks Sam

2 1

Shared Secret
by Cesar De la Hoz 02 Oct '07

02 Oct '07

I want to setup a Client in my server by only setting his IP, and not caring about the share secret he's using. Is this possible ? _________________________________________________________________ Discover the new Windows Vista http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE

3 2

same attribute for multiple users
by Sergio Del Pino 01 Oct '07

01 Oct '07

Hi, I'm a newbie on freeradius, I need to send the same attribute to multiple users how can I do, I'm using freeradius.net 1.1.7 my users files work this way user1 User-Password == "pwusr1" user2 User-Password == "pwusr2" ... usern User-Password == "pwusrn" the attribute I need to send is Filter-Id="some_acl0.in" to any user that radius send access-accept I want to know the config sintax in order to avoid this: user1 User-Password == "pwusr1" Filter-Id="some_acl0.in" user2 User-Password == "pwusr2" Filter-Id="some_acl0.in" ... usern User-Password == "pwusrn" Filter-Id="some_acl0.in" May I use the DEFAULT? Thanks in advance, Sergio

3 5

Radiusd won't work with both Windows XP and Linux
by Sergio Belkin 01 Oct '07

01 Oct '07

Hi community, I keep trying in order to radius authenticate and authorize users from XP. I have a very simple configuration, only a "plain user". Please bear in mind that I've just read http://wiki.freeradius.org/index.php/FreeRADIUS_Wiki:FAQ#PEAP_or_EAP-TLS_Do…. I've put xpextensions file in the same directory that openssl.cnf. I've imported cacert.pem both Windows XP and Linux too. (Linux is an Ubuntu 7.04) I feel like a fool because I can't solve this problem being and server so easy to configure it... I've even read some RFC, but I couldn't find the problem The Access Point es a Linksys WAP54G. Please could you help me? ########## radtest output: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 2147483647 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/privandpubradius.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/privandpubradius.pem" tls: CA_file = "/usr/local/etc/raddb/certs/CA/cacert.pem" tls: private_key_password = "pepito" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.30.1.151:32836, id=114, length=58 User-Name = "esaure" User-Password = "ric54aur" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "esaure", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 154 modcall[authorize]: module "files" returns ok for request 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 modcall[authenticate]: module "unix" returns notfound for request 0 modcall: leaving group authenticate (returns notfound) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 114 to 10.30.1.151 port 32836 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 114 with timestamp 46fab901 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.30.1.151:32836, id=118, length=56 User-Name = "test" User-Password = "testing" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 1 modcall[authorize]: module "pap" returns updated for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type pap auth: type "PAP" Processing the authenticate section of radiusd.conf modcall: entering group PAP for request 1 rlm_pap: login attempt with password testing rlm_pap: Using clear text password "testing". rlm_pap: User authenticated successfully modcall[authenticate]: module "pap" returns ok for request 1 modcall: leaving group PAP (returns ok) for request 1 Sending Access-Accept of id 118 to 10.30.1.151 port 32836 Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 118 with timestamp 46fab90b Nothing to do. Sleeping until we see a request. ############### Using Windows XP this the output: # Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = no mschap: require_encryption = yes mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 2147483647 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/privandpubradius.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/privandpubradius.pem" tls: CA_file = "/usr/local/etc/raddb/certs/CA/cacert.pem" tls: private_key_password = "pepito" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.30.1.151:1030, id=49, length=98 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020100090174657374 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 Message-Authenticator = 0x783938e0109f4432b84399bad878bd2b Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 0 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 49 to 10.30.1.151 port 1030 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x84a491220515c511552ab706171613e1 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=50, length=187 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x0202005019800000004616030100410100003d030146fac439ea8581ba21eabf553c7e2bede79d8a8b5e8050ec49018ce88e0d365e00001600040005000a000900640062000300060013001200630100 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0x84a491220515c511552ab706171613e1 Message-Authenticator = 0xf94bf86181675508eb38163c3ccdb58a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 2 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 1 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0323], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 50 to 10.30.1.151 port 1030 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x050003818100b0496218dcda605d85723a61b574fe1254e2d9a02fcc7c635099f663609b0e5c4507497ed3ee2b15082bdc3ad578060c015ed439a6072eb1e6f418a7a0394442afbf6465258a1afd677343c6a71f9a4cf79d34f28d1c074053e2f7a9de236dbe7d7ea9a2150b26643b95e33f83172a0e36805e9ee185e5d2f8a914843a8647f516030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf67d20ce350871f2a01558b626942ec1 Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=51, length=113 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020300061900 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0xf67d20ce350871f2a01558b626942ec1 Message-Authenticator = 0xff8212d6d6cf53f90aa029b7e1750412 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 2 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 51 to 10.30.1.151 port 1030 EAP-Message = 0x010400061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6718a187125536104c34d39a67d872ae Finished request 2 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 49 with timestamp 46fac4f8 Cleaning up request 1 ID 50 with timestamp 46fac4f8 Cleaning up request 2 ID 51 with timestamp 46fac4f8 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.30.1.151:1030, id=52, length=98 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020100090174657374 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 Message-Authenticator = 0xa50d51122cbcbca9b42f183e87bcf2ff Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 1 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 3 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 52 to 10.30.1.151 port 1030 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf2f11f2363c9058735a8cf115c21579b Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=53, length=187 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x0202005019800000004616030100410100003d030146fac440ecd88b50f115a021416ea93ede6ca1ae6530c8aeee1359ebe421693700001600040005000a000900640062000300060013001200630100 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0xf2f11f2363c9058735a8cf115c21579b Message-Authenticator = 0x6a66b60b4c1c090bd1fefdb7af34f958 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 2 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 4 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0323], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 53 to 10.30.1.151 port 1030 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x050003818100b0496218dcda605d85723a61b574fe1254e2d9a02fcc7c635099f663609b0e5c4507497ed3ee2b15082bdc3ad578060c015ed439a6072eb1e6f418a7a0394442afbf6465258a1afd677343c6a71f9a4cf79d34f28d1c074053e2f7a9de236dbe7d7ea9a2150b26643b95e33f83172a0e36805e9ee185e5d2f8a914843a8647f516030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x686966e2c087d527da96cedec3d51618 Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=54, length=113 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020300061900 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0x686966e2c087d527da96cedec3d51618 Message-Authenticator = 0xefee4d42ec5b5f3d2df4736ac0549665 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 5 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 54 to 10.30.1.151 port 1030 EAP-Message = 0x010400061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbbcbe3c8e9f43cc41e8360e599a5e6fa Finished request 5 Going to the next request --- Walking the entire request list --- Waking up in 5 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 52 with timestamp 46fac4fe Cleaning up request 4 ID 53 with timestamp 46fac4fe Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 5 ID 54 with timestamp 46fac4ff Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.30.1.151:1030, id=55, length=98 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020100090174657374 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 Message-Authenticator = 0x9917ffe1cd380b71e40ed91da13f7fc1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 1 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 6 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 Sending Access-Challenge of id 55 to 10.30.1.151 port 1030 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0335900dbfb1bdd2b0c17674b7db419b Finished request 6 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=56, length=187 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x0202005019800000004616030100410100003d030146fac4468988f6080cf3248a01b110b6d0700b5487d62a114569b3a3dbf139eb00001600040005000a000900640062000300060013001200630100 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0x0335900dbfb1bdd2b0c17674b7db419b Message-Authenticator = 0xd856025ba1d1a5bddc8181150745851a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 2 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 7 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0323], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 7 modcall: leaving group authenticate (returns handled) for request 7 Sending Access-Challenge of id 56 to 10.30.1.151 port 1030 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x050003818100b0496218dcda605d85723a61b574fe1254e2d9a02fcc7c635099f663609b0e5c4507497ed3ee2b15082bdc3ad578060c015ed439a6072eb1e6f418a7a0394442afbf6465258a1afd677343c6a71f9a4cf79d34f28d1c074053e2f7a9de236dbe7d7ea9a2150b26643b95e33f83172a0e36805e9ee185e5d2f8a914843a8647f516030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb877e283342bd8b279df59890c6bf865 Finished request 7 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=57, length=113 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020300061900 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0xb877e283342bd8b279df59890c6bf865 Message-Authenticator = 0xbf5b398977c45e8cf03ee239066a4c22 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 modcall[authorize]: module "chap" returns noop for request 8 modcall[authorize]: module "mschap" returns noop for request 8 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 8 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 8 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 8 modcall: leaving group authorize (returns updated) for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 8 modcall: leaving group authenticate (returns handled) for request 8 Sending Access-Challenge of id 57 to 10.30.1.151 port 1030 EAP-Message = 0x010400061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x869911e557010be04e131fecf32148c2 Finished request 8 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 6 ID 55 with timestamp 46fac505 Cleaning up request 7 ID 56 with timestamp 46fac505 Cleaning up request 8 ID 57 with timestamp 46fac505 Nothing to do. Sleeping until we see a request. Config Files: ###### radiusd.conf ####### prefix = /usr/local exec_prefix = ${prefix} sysconfdir = ${prefix}/etc localstatedir = ${prefix}/var sbindir = ${exec_prefix}/sbin logdir = ${localstatedir}/log/radius raddbdir = ${sysconfdir}/raddb radacctdir = ${logdir}/radacct confdir = ${raddbdir} run_dir = ${localstatedir}/run/radiusd log_file = ${logdir}/radius.log libdir = ${exec_prefix}/lib pidfile = ${run_dir}/radiusd.pid user = radiusd group = radiusd max_request_time = 30 delete_blocked_requests = no cleanup_delay = 5 max_requests = 1024 bind_address = * port = 0 hostname_lookups = no allow_core_dumps = no regular_expressions = yes extended_expressions = yes log_stripped_names = no log_auth = no log_auth_badpass = no log_auth_goodpass = no usercollide = no lower_user = no lower_pass = no nospace_user = no nospace_pass = no checkrad = ${sbindir}/checkrad security { max_attributes = 200 reject_delay = 1 status_server = no } proxy_requests = yes $INCLUDE ${confdir}/proxy.conf $INCLUDE ${confdir}/clients.conf snmp = no $INCLUDE ${confdir}/snmp.conf thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 } modules { pap { auto_header = yes } chap { authtype = CHAP } pam { pam_auth = radiusd } unix { cache = no cache_reload = 600 radwtmp = ${logdir}/radwtmp } $INCLUDE ${confdir}/eap.conf mschap { use_mppe = no require_encryption = yes } ldap { server = "ldap.your.domain" basedn = "o=My Org,c=UA" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" start_tls = no access_attr = "dialupAccess" dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_connections_number = 5 edir_account_policy_check=no timeout = 4 timelimit = 3 net_timeout = 1 } realm IPASS { format = prefix delimiter = "/" ignore_default = no ignore_null = no } realm suffix { format = suffix delimiter = "@" ignore_default = no ignore_null = no } realm realmpercent { format = suffix delimiter = "%" ignore_default = no ignore_null = no } realm ntdomain { format = prefix delimiter = "\\" ignore_default = no ignore_null = no } checkval { item-name = Calling-Station-Id check-name = Calling-Station-Id data-type = string } preprocess { huntgroups = ${confdir}/huntgroups hints = ${confdir}/hints with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no } files { usersfile = ${confdir}/users acctusersfile = ${confdir}/acct_users preproxy_usersfile = ${confdir}/preproxy_users compat = no } detail { detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d detailperm = 0600 } acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } $INCLUDE ${confdir}/sql.conf radutmp { filename = ${logdir}/radutmp username = %{User-Name} case_sensitive = yes check_with_nas = yes perm = 0600 callerid = "yes" } radutmp sradutmp { filename = ${logdir}/sradutmp perm = 0644 callerid = "no" } attr_filter { attrsfile = ${confdir}/attrs } counter daily { filename = ${raddbdir}/db.daily key = User-Name count-attribute = Acct-Session-Time reset = daily counter-name = Daily-Session-Time check-name = Max-Daily-Session allowed-servicetype = Framed-User cache-size = 5000 } sqlcounter dailycounter { counter-name = Daily-Session-Time check-name = Max-Daily-Session reply-name = Session-Timeout sqlmod-inst = sql key = User-Name reset = daily query = "SELECT SUM(AcctSessionTime - \ GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ FROM radacct WHERE UserName='%{%k}' AND \ UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" } sqlcounter monthlycounter { counter-name = Monthly-Session-Time check-name = Max-Monthly-Session reply-name = Session-Timeout sqlmod-inst = sql key = User-Name reset = monthly query = "SELECT SUM(AcctSessionTime - \ GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ FROM radacct WHERE UserName='%{%k}' AND \ UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" } always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } expr { } digest { } exec { wait = yes input_pairs = request } exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = request output_pairs = reply } ippool main_pool { range-start = 192.168.1.1 range-stop = 192.168.3.254 netmask = 255.255.255.0 cache-size = 800 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = no maximum-timeout = 0 } } instantiate { exec expr } authorize { preprocess chap mschap suffix eap files pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } unix eap } preacct { preprocess acct_unique suffix files } accounting { detail unix radutmp } session { radutmp } post-auth { } pre-proxy { } post-proxy { eap } ####### eap.conf ####### test Cleartext-Password := "testing" DEFAULT Auth-Type = System Fall-Through = 1 DEFAULT Service-Type == Framed-User Framed-IP-Address = 255.255.255.254, Framed-MTU = 576, Service-Type = Framed-User, Fall-Through = Yes DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP ######### eap.conf ######### eap { default_eap_type = peap timer_expire = 6000000000 ignore_unknown_eap_types = no cisco_accounting_username_bug = no md5 { } leap { } gtc { auth_type = PAP } tls { private_key_password = pepito private_key_file = ${raddbdir}/certs/privandpubradius.pem certificate_file = ${raddbdir}/certs/privandpubradius.pem CA_file = ${raddbdir}/certs/CA/cacert.pem dh_file = ${raddbdir}/certs/dh random_file = ${raddbdir}/certs/random } peap { default_eap_type = mschapv2 } mschapv2 { } } ######### Output when using Linux supplicant: ################ rad_recv: Access-Request packet from host 10.30.1.151:1030, id=58, length=98 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020100090174657374 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 Message-Authenticator = 0x1fb2a16573be8af3a6d5ac9c59ef92db Processing the authorize section of radiusd.conf modcall: entering group authorize for request 9 modcall[authorize]: module "preprocess" returns ok for request 9 modcall[authorize]: module "chap" returns noop for request 9 modcall[authorize]: module "mschap" returns noop for request 9 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 9 rlm_eap: EAP packet type response id 1 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 9 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 9 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 9 modcall: leaving group authorize (returns updated) for request 9 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 9 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 9 modcall: leaving group authenticate (returns handled) for request 9 Sending Access-Challenge of id 58 to 10.30.1.151 port 1030 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1a1d3ba592915afdf20265d5bb6c7465 Finished request 9 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=59, length=200 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x0202005d190016030100520100004e030146fac7de8347c7d2fceb438f22f51dcde2c61953096e9a37753b9d4a649e0cee00002600390038003500160013000a00330032002f0005000400150012000900140011000800060003020100 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0x1a1d3ba592915afdf20265d5bb6c7465 Message-Authenticator = 0x903c36b969609a7633037b48094f00b9 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 10 modcall[authorize]: module "preprocess" returns ok for request 10 modcall[authorize]: module "chap" returns noop for request 10 modcall[authorize]: module "mschap" returns noop for request 10 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 10 rlm_eap: EAP packet type response id 2 length 93 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 10 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 10 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 10 modcall: leaving group authorize (returns updated) for request 10 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 10 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0052], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0323], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 010d], ServerKeyExchange TLS_accept: SSLv3 write key exchange A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 10 modcall: leaving group authenticate (returns handled) for request 10 Sending Access-Challenge of id 59 to 10.30.1.151 port 1030 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x8950ea09d12b2097543f9d5b2f099ed5f4f312a357ab Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc29cc4fd6a04b0ef2cbb64df46562bdb Finished request 10 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=60, length=113 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x020300061900 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0xc29cc4fd6a04b0ef2cbb64df46562bdb Message-Authenticator = 0x322fdf179efffc12c59e9ec874899e8e Processing the authorize section of radiusd.conf modcall: entering group authorize for request 11 modcall[authorize]: module "preprocess" returns ok for request 11 modcall[authorize]: module "chap" returns noop for request 11 modcall[authorize]: module "mschap" returns noop for request 11 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 11 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 11 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 11 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 11 modcall: leaving group authorize (returns updated) for request 11 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 11 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 11 modcall: leaving group authenticate (returns handled) for request 11 Sending Access-Challenge of id 60 to 10.30.1.151 port 1030 EAP-Message = 0x010400981900fabe1a17cb2a1300809cbc50d12dbb35266732bf1e5fe7b842781cd34d0ebebad76df36c0bca11ce22b5fa5b24a9dab4832393079f61565ba8f848096f3c60f27ffabad67deee72ffd2e7ebdc2b053a923f250cdfa2d2e9aa6eeba4ae77e53558c29fd53b8821552746f698cfb830f277f0a10de5f98c0201a6a566798cccfa3035b2eeba716ce6c9f16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0acf35717843bc3dd822134a8499127d Finished request 11 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.30.1.151:1030, id=61, length=120 User-Name = "test" Calling-Station-Id = "00-0e-35-bf-51-18" EAP-Message = 0x0204000d190015030100020230 Framed-MTU = 1287 NAS-IP-Address = 192.168.1.1 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 State = 0x0acf35717843bc3dd822134a8499127d Message-Authenticator = 0x5a0d79c56e88c6b6f0bdc193f1a6c701 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 12 modcall[authorize]: module "preprocess" returns ok for request 12 modcall[authorize]: module "chap" returns noop for request 12 modcall[authorize]: module "mschap" returns noop for request 12 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 12 rlm_eap: EAP packet type response id 4 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 12 users: Matched entry test at line 79 modcall[authorize]: module "files" returns ok for request 12 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 12 modcall: leaving group authorize (returns updated) for request 12 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 12 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake rlm_eap_tls: <<< TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert read:fatal:unknown CA TLS_accept:failed in SSLv3 read client certificate A rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca rlm_eap_tls: SSL_read failed inside of TLS (-1), TLS session fails. eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 12 modcall: leaving group authenticate (returns reject) for request 12 auth: Failed to validate the user. Delaying request 12 for 1 seconds Finished request 12 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 9 ID 58 with timestamp 46fac881 Cleaning up request 10 ID 59 with timestamp 46fac881 Cleaning up request 11 ID 60 with timestamp 46fac881 Sending Access-Reject of id 61 to 10.30.1.151 port 1030 EAP-Message = 0x04040004 Message-Authenticator = 0x00000000000000000000000000000000 Cleaning up request 12 ID 61 with timestamp 46fac881 Nothing to do. Sleeping until we see a request. ######## Gracias de antemano... -- Sergio Belkin Teléfonos 15-6119-2226 // 4788-8605 ----------------------------------------

3 5

attribute value length limit
by Fco. Javier Melero 01 Oct '07

01 Oct '07

Hi you all, I've got an LDAP attribute mapped into user-password RADIUS attribute. This attribute is RSA-ciphered so RADIUS have to deciphered it when it arrives in order to use it for authentication. The problem arise when I try to use an RSA key pretty much longer than 1400 bytes, because the resulting value exceed the 253 bytes RADIUS specification length limit. My questions are: Is this size limit mandatory even when this RADIUS attribute is never put on the wire? If so, could anybody point a way which allow me to use longer RSA keys? Thanks in advance. Greetings -- ========================================================= Fco. Javier Melero de la Torre Universidad Carlos III de Madrid Servicio de Informática y Comunicaciones Area de Seguridad y Comunicaciones (https://asyc.uc3m.es) e-mail: javier(a)di.uc3m.es phone: (+34) 916.249.980, (+34) 918.561.341 fax: (+34) 916.249.430 =========================================================

2 8

Novell Integratoion
by Brad Lachel 01 Oct '07

01 Oct '07

I am trying to get free radius to authenticate users with my Novell server. I know that I am close, but I don't quite have it. I can see that my access points are sending MAC address to the radius server as the user name, that MAC is then authenticated through my users file and passed to Novell. the Mac sent to Novell as the uid and is then accepted or rejected. I know this, because I created a user in Novell with my MAC as the user name and the user was authenticated successfully. I then changed the ldap filter to read: filter = "(radiusCheckItem=%{Stripped-User-Name:-%{User-Name}})" and then I placed my MAC address in the radusCheckItem field in Novell for my Novell record. I can not get authenticated this way, I receive the following error: rlm_ldap: performing search in o=dist-155, with filter (radiusCheckItem=0016cb-b64f93) rlm_ldap: object not found or got ambiguous search result rlm_ldap: search failed I clearly have something missing, or I am confused about something. Any help with this would be greatly appreciated. Thanks Brad Lachel Community High School District #155 1 S Virginia Rd Crystal Lake, IL 60014 815-455-8500 x 28 ----------------------------- All e-mail to and from this address is subject to the Acceptable Use Policies of Community High School District #155. All e-mail may be monitored and/or disclosed to third parties. Any views or opinions presented in an e-mail are solely those of the author and may not represent those of Community High School District #155. Community High School District #155 http://www.d155.org

2 1

reject_relay and freeradius as a daemon
by Ana Gallardo Gómez 01 Oct '07

01 Oct '07

- Freeradius 1.1.7 - Debian Sarge (kernel 2.6.18-5-686) - IBM x3550 Hello! When I run freeradius in debug mode the Access-Reject is sent after the delay time indicated by the reject_delay setting. When I run freeradius as a daemos, the Access-Reject is delayed too many time when reject_delay > 0. If I set reject_delay to 0 and run as a daemon, there is no delay. In radiusd.conf I can read: # reject_delay: When sending an Access-Reject, it can be # delayed for a few seconds. This may help slow down a DoS # attack. It also helps to slow down people trying to brute-force # crack a users password. # # Setting this number to 0 means "send rejects immediately" # # If this number is set higher than 'cleanup_delay', then the # rejects will be sent at 'cleanup_delay' time, when the request # is deleted from the internal cache of requests. # # Useful ranges: 1 to 5 I have seen this thread in the mailing-list in 2004 (http://lists.freeradius.org/mailman/htdig/freeradius-users/2004-September/0…) but I find the same problem right now. I don´t know if the global delayed time is reject_delay + max_session_time. I can´t find max_session_time. Maybe reject_delay + max_request_time ? I don´t know what can I do: 1. delay_reject = 0 2. small max_request_time ... Thank you and sorry for my english. _________________________________________________________________ Prueba algunos de los nuevos servicios en línea que te ofrece Windows Live Ideas: tan nuevos que ni siquiera se han publicado oficialmente todavía. http://ideas.live.com

2 1

802.1x machine authentication patch help
by Marco Casulli 01 Oct '07

01 Oct '07

Hi Jamie, Marco from BBC in london. I have read your message (http://lists.cistron.nl/pipermail/freeradius-users/2005-November/048576 .html related to the error when the radius is trying to authenticate in AD and I am getting exactly the same message. "No logon workstation trust account (0xc0000199)". The article is dated Nov 2005 so I hope you have the solution by now! ;-) How did you fix the problem? I cant find any resolution on the net. Thanks Marco This email may contain confidential information. If you receive it in error please immediately advise the sender and delete it from your system without copying, distributing or taking any action in reliance upon it. Red Bee Media Limited has taken precautions in respect of its email communications to preserve confidentiality and to ensure that any attachment has been checked for viruses. However, we cannot accept liability for any damage sustained as a result of interceptions and software viruses and you should take your own precautions before responding to us by email and carry out your own virus checks before opening any attachment. Red Bee Media Limited Registered No: 04257461 England Registered Office: BC2 A1 Broadcast Centre, 201 Wood Lane, London W12 7TP

3 5