July 2007 - Freeradius-Users - lists.freeradius.org

eap-tls and checking crl
by Stefan Nowak 14 Jul '07

14 Jul '07

OK, i find where was that stupid error :) i dont know why but i wrote in CA_path = /bin/raddb/certs/. ofcourse /raddb isn`t in /bin/ only /etc/ :P. Thx. for spend your time to help fix this problem. ---------------------------------------------------- Co robisz w tym tygodniu? Chcesz zasmakować żeglarskiej przygody? Czekamy na Ciebie z imprezą "Tydzień Żeglarski w Giżycku"! Info: http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd117.html&sid=…

1 0

eap-tls and checking crl
by Stefan Nowak 14 Jul '07

14 Jul '07

this is all logs from radiusd -X: Going to the next request --- Walking the entire request list --- Waking up in 5 seconds... rad_recv: Access-Request packet from host 192.168.1.9:1812, id=11, length=140 NAS-IP-Address = 192.168.1.9 NAS-Port = 50003 NAS-Port-Type = Ethernet User-Name = "klient" Called-Station-Id = "00-0F-F7-54-C3-03" Calling-Station-Id = "00-11-09-26-48-FA" Service-Type = Framed-User Framed-MTU = 1500 State = 0x01a863756b2ba130f66e9727b986f126 EAP-Message = 0x020a00060d00 Message-Authenticator = 0x2304361a723e66a2de23e5efa06788ba Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "klient", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 10 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 190 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 11 to 192.168.1.9 port 1812 Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x010b00cd0d80000008c319060355040813124b756a6177736b6f2d506f6d6f72736b69653112301006035504071309427964676f737a637a3121301f060355040a131857797a737a6120537a6b6f6c6120476f73706f6461726b6931283026060355040b131f496e73747974757420496e666f726d6174796b692053746f736f77616e656a3121301f0603550403131857797a737a6120537a6b6f6c6120476f73706f6461726b69311f301d06092a864886f70d010901161070696f6e617240676d61696c2e636f6d0e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6cac8a19b1391d1900c65604d6c49bca Finished request 3 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 192.168.1.9:1812, id=12, length=1277 NAS-IP-Address = 192.168.1.9 NAS-Port = 50003 NAS-Port-Type = Ethernet User-Name = "klient" Called-Station-Id = "00-0F-F7-54-C3-03" Calling-Station-Id = "00-11-09-26-48-FA" Service-Type = Framed-User Framed-MTU = 1500 State = 0x6cac8a19b1391d1900c65604d6c49bca EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x15032586f5230e82c51180edb559aac7be1a241f744e3f8b61db80714d7f1f2307f6a997e1758f1fadd57d1d80324e64f4dd59f7fd90d0c26505890f4f51fd22c4f296f71579fe1bc071dc0fb50261f71403010001011603010020b1cae07451a060ca2116569c2cf3636804816030195ca978ebf9926f23f8426f Message-Authenticator = 0xb5105d34ed04a2e8f86f745be477abd8 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "klient", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 11 length 253 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 190 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0329], Certificate --> verify error:num=3:unable to get certificate CRL rlm_eap_tls: >>> TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert write:fatal:unknown CA TLS_accept:error in SSLv3 read client certificate B rlm_eap: SSL error error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned rlm_eap_tls: SSL_read failed in a system call (-1), TLS session fails. In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 12 to 192.168.1.9 port 1812 Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x010c00110d800000000715030100020230 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa483477851e66e0f4e32edcd0f27c1bd Finished request 4 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 192.168.1.9:1812, id=13, length=140 NAS-IP-Address = 192.168.1.9 NAS-Port = 50003 NAS-Port-Type = Ethernet User-Name = "klient" Called-Station-Id = "00-0F-F7-54-C3-03" Calling-Station-Id = "00-11-09-26-48-FA" Service-Type = Framed-User Framed-MTU = 1500 State = 0xa483477851e66e0f4e32edcd0f27c1bd EAP-Message = 0x020c00060d00 Message-Authenticator = 0x605a7ee69287c9cdbcf211bdd49a2410 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "klient", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 12 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 190 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack alert eaptls_verify returned 4 eaptls_process returned 4 rlm_eap: Handler failed in EAP/tls rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 5 modcall: leaving group authenticate (returns invalid) for request 5 auth: Failed to validate the user. Delaying request 5 for 1 seconds Finished request 5 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 192.168.1.9:1812, id=13, length=140 Sending Access-Reject of id 13 to 192.168.1.9 port 1812 EAP-Message = 0x040c0004 Message-Authenticator = 0x00000000000000000000000000000000 --- Walking the entire request list --- Cleaning up request 0 ID 8 with timestamp 4698bbcc Cleaning up request 1 ID 9 with timestamp 4698bbcc Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 10 with timestamp 4698bbcd Cleaning up request 3 ID 11 with timestamp 4698bbcd Cleaning up request 4 ID 12 with timestamp 4698bbcd Cleaning up request 5 ID 13 with timestamp 4698bbcd Nothing to do. Sleeping until we see a request. ---------------------------------------------------- Jesteś fanem filmu "Seks w wielkim mieście"? Ta komedia romantyczna jest dla Ciebie! MIŁOŚĆ I INNE NIESZCZĘŚCIA - w kinach od 20 lipca! http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fmilosc_i_inne.…

1 0

eap-tls and checking crl
by Stefan Nowak 14 Jul '07

14 Jul '07

Hi. I configured Freeradius with eap/tls , everything is ok, the clients have access-accept but i have set in eap.conf "check_crl=no" and now i wanna use crl, then i changed "check_crl=yes" and write "CA_path= /bin/raddb/certs/" i create crl.pem and move it to /etc/raddb/certs/, next i used 'c_rechash /etc/raddb/certs/'. I think it was everything what i must do, but in radiusd -X show me some problem. rlm_eap: Handler failed in EAP/tls rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 5 modcall: leaving group authenticate (returns invalid) for request 5 auth: Failed to validate the user. Delaying request 5 for 1 seconds Finished request 5 If i hash this 2 lines in eap.conf that means 'check_crl=yes' and 'CA_path= /bin/raddb/certs/' then freeradius works ok. where is problem with using crl? ---------------------------------------------------- Oto pierwsza męska para w historii łyżwiarstwa figurowego! Zobacz ostrą jazdę po bandzie w komedii OSTRZA CHWAŁY - w kinach od 20 lipca! http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fostrza_chwaly.…

2 1

postgres vs mysql start / stop times
by Hugh Messenger 13 Jul '07

13 Jul '07

Something I noticed whilst comparing the postgres and mysql rlm_sql configs is that when postgres sets an AcctStartTime or AcctStopTime, it figures in the delay time, whereas the mysql queries don't. For example, in accounting_stop_query, postgres has: AcctStopTime = (now() - '%{Acct-Delay-Time:-0}'::interval) . whereas mysql just has: AcctStopTime = '%S' Where %S is "request timestamp in SQL format". Which should be pretty darn close to now(). I presume this is just down to the personal preferences of whoever wrote the two sets of queries? Personally, I wouldn't expect the queries to apply the delay time to the start/stop time, so the MySQL version is "correct". IMHO interpretation of the data should be left to the backend provisioning. No biggie, just an observation. -- hugh

2 3

MSCHAP test client?
by Hugh Messenger 13 Jul '07

13 Jul '07

Has anyone ever come across a RADIUS test client which supports MSCHAP? Remote working is a wonderful thing, but it does mean I'm several hundred miles from my nearest NAS and wireless client. This obviously makes certain aspects of RADIUS testing a bit tricky. -- hugh

3 4

Configuration doubt
by Thiago Drechsel 13 Jul '07

13 Jul '07

Hi all. I'm new with freeradius. I'd like some help to configure my Radius server, in order to acomplish the following task: I have a radius server, called "R". This radius authenticates users wha want to access our lab equipments, called A, B, C, D and etc. I want to restrict access to these equipments to some users, using radius. For example, user "john" only can access equipments B and C, but can't access equipments A and D. Can anyone help me with this task? Thanks in advance Thiago

2 2

Coredump on AIX 5.3
by Hillel Seltzer 13 Jul '07

13 Jul '07

Hello, I am trying to install freeradius 1.1.6 on AIX 5.3 with gcc 4.1.1. If I follow the basic instructions it seems to compile and install. However, trying to run "radiusd" with any options results in a coredump. Has anyone managed to install a recent freeradius release on AIX 5.3? What configure options did you use? Any special modifications to the source required? Thanks. ---Hillel

2 5

RE: Authentication failed
by Carlos Jimenez Barranco 13 Jul '07

13 Jul '07

*********************** Mensaje examinado por el antivirus perimetral de Impala Network Solutions ***********-*********** Good morning: Enterasys is the AP and the wireless card. Otherways, we have also tried with an integrated Intel Centrino card with the same result. About the supplicant, we tried with Windows Client and with one provided by Enterasys. In both of them we cannot connect correctly. Unfortunately, this point was into a project that should be finished yesterday (I'd like to have found this mailing list several days before) and we should to configure the system with preshared keys in order to left system running. Authentication with domain was finally not implemented. Today, we have not access to that system and cannot do anything more. The project's world! :( Otherways, we really appreciate all your help and advices. Thank you. Carlos Jimenez Barranco - Área de Postventa Telf. +34 933034139 www.impala-net.com Sistemas de Comunicaciones Corporativas -----Mensaje original----- De: freeradius-users-bounces+cjimenez=impala-net.com(a)lists.freeradius.or [mailto:freeradius-users-bounces+cjimenez=impala-net.com@lists.freeradius.or] En nombre de tnt(a)kalik.co.yu Enviado el: jueves, 12 de julio de 2007 16:24 Para: FreeRadius users mailing list Asunto: RE: Authentication failed *********************** Mensaje examinado por el antivirus perimetral de Impala Network Solutions ***********-*********** Lets get few things straight: Enterasys is your AP, not your wireless card? What supplicant are you using on your PC to connect: Windows XP supplicant, supplicant provided by the manufacturer of PC's wireless card or something else? Supplicant is the program you are using to make the wireless connection. What EAP type are you trying to use? You started with PEAP but in the last output your supplicant was trying to do TTLS of some sort. Ivan Kalik Kalik Informatika ISP Dana 12/7/2007, "Carlos Jimenez Barranco" <cjimenez(a)impala-net.com> piše: > >*********************** >Mensaje examinado por el antivirus perimetral de Impala Network Solutions >***********-*********** > > >Hi: > >We have found that on PC, wireless card needs to introduce manually a username and password, it doesn't takes the domain credentials automatically. >We have tried, just for probing, with a non valid user, in this case root and the password for the freeradius server. This is why it appears "anonymous". But we have not made more changes. >After this trying, we restarted the service and we found that with domain user credentials didn't connect correctly the PC. >Could it be due a malfunctioning or an issue of the Enterasys wireless card and/or AP? > >Thanks. > >Carlos Jimenez Barranco >- Área de Postventa > Telf. +34 933034139 > > >www.impala-net.com > >Sistemas de Comunicaciones Corporativas > > > > > >-----Mensaje original----- >De: freeradius-users-bounces+cjimenez=impala-net.com(a)lists.freeradius.or [mailto:freeradius-users-bounces+cjimenez=impala-net.com@lists.freeradius..or] En nombre de A.L.M.Buxey(a)lboro.ac.uk >Enviado el: jueves, 12 de julio de 2007 14:41 >Para: FreeRadius users mailing list >CC: Cristina Martin Molin >Asunto: Re: Authentication failed > >*********************** >Mensaje examinado por el antivirus perimetral de Impala Network Solutions >***********-*********** > > >Hi, > > >you are CHANING more than ONE thing at a time. look at this: > >> rlm_eap: Request found, released from the list >> rlm_eap: EAP NAK >> rlm_eap: EAP-NAK asked for EAP-Type/ttls >> rlm_eap: No such EAP type ttls >> rlm_eap: Failed in EAP select >> modcall[authenticate]: module "eap" returns invalid for request 7 >> modcall: group authenticate returns invalid for request 7 >> auth: Failed to validate the user. >> Login incorrect: [anonymous/<no User-Password attribute>] (from client 17224.230.15 port 1 cli 00118865b6e5) > >why is it now attempting TTLS authentication? why have you taken such >auth method out of the loop? ntlm_auth isnt being called AT ALL now. > >one change at a time! > >alan >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > >___________________________________________________________________________ > >Este mensaje se dirije exclusivamente a su destinatario y puede contener >información privilegiada o confidencial de Impala Network Solutions S.L. >Si no es vd. el destinatario indicado, queda notificado de que la utilización, >divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. >Si ha recibido este mensaje por error, le rogamos nos lo comunique >inmediatamente por esta misma via y proceda a su destrucción. > > >This message is intended exclusively for its addressee and may contain >information that is CONFIDENTIAL and protected by professional privilege. >If you are not the intended recipient you are hereby notified that any >dissemination, copy or disclosure of this communication is strictly >prohibited by law. If this message has been received in error, please >immediately notify us via e-mail and delete it. >___________________________________________________________________________ > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ___________________________________________________________________________ Este mensaje se dirije exclusivamente a su destinatario y puede contener información privilegiada o confidencial de Impala Network Solutions S.L. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos nos lo comunique inmediatamente por esta misma via y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. ___________________________________________________________________________

1 0

EAP-TTLS proxy of the tunneled method
by El hadi Iskander 13 Jul '07

13 Jul '07

Hi everybody, I'm a new user of freeradius ... I'm using the 1.1.3-2 version with a linux Fedora Core 6 . I'm using EAP-TTLS and I'm trying to proxy the tunneld method to another radius server ..; wonder if it is possible to do this with Freeradius ? I've seen that this is possible with PEAP (proxy_tunneled_request_as_eap = yes) but I don't know where the ip adress of the home AAA is specified ... Regards, El hadi

3 2

Re: EAP-TLS authentication (Alan DeKok)
by anoop_c＠sifycorp.com 13 Jul '07

13 Jul '07

pls find the attached n: lower_user = \"no\" main: lower_pass = \"no\" main: nospace_user = \"no\" main: nospace_pass = \"no\" main: checkrad = \"/usr/local/sbin/checkrad\" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = \"(null)\" exec: input_pairs = \"request\" exec: output_pairs = \"(null)\" exec: packet_type = \"(null)\" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded System unix: cache = no unix: passwd = \"(null)\" unix: shadow = \"(null)\" unix: group = \"(null)\" unix: radwtmp = \"/usr/local/var/log/radius/radwtmp\" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = \"tls\" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = \"(null)\" tls: pem_file_type = yes tls: private_key_file = \"/etc/1x/07xwifi.pem\" tls: certificate_file = \"/etc/1x/07xwifi.pem\" tls: CA_file = \"/etc/1x/root.pem\" tls: private_key_password = \"password\" tls: dh_file = \"/etc/1x/DH\" tls: random_file = \"/etc/1x/random\" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = \"(null)\" tls: cipher_list = \"(null)\" tls: check_cert_issuer = \"(null)\" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = \"/etc/raddb/huntgroups\" preprocess: hints = \"/etc/raddb/hints\" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = \"suffix\" realm: delimiter = \"@\" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = \"/etc/raddb/users\" files: acctusersfile = \"/etc/raddb/acct_users\" files: preproxy_usersfile = \"/etc/raddb/preproxy_users\" files: compat = \"no\" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = \"User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Addre ss, NAS-Port\" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = \"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/de tail-%Y%m%d\" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = \"/usr/local/var/log/radius/radutmp\" radutmp: username = \"%{User-Name}\" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.50:1026, id=0, length=213 Message-Authenticator = 0x33339877b96e876b381f2c9d3bf7ae2e Service-Type = Framed-User User-Name = \"saravanakumar07\" Framed-MTU = 1488 Called-Station-Id = \"00-0F-3D-AF-DD-C2:default\" Calling-Station-Id = \"00-0E-35-F3-A1-67\" NAS-Identifier = \"D-Link Access Point\" NAS-Port-Type = Wireless-802.11 Connect-Info = \"CONNECT 54Mbps 802.11g\" EAP-Message = 0x02000014017361726176616e616b756d61723037 NAS-IP-Address = 192.168.0.50 NAS-Port = 1 NAS-Port-Id = \"STA port # 1\" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module \"preprocess\" returns ok for request 0 rlm_realm: No \'@\' in User-Name = \"saravanakumar07\", looking up realm NULL rlm_realm: No such realm \"NULL\" modcall[authorize]: module \"suffix\" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 20 rlm_eap: No EAP Start, assuming it\'s an on-going EAP conversation modcall[authorize]: module \"eap\" returns updated for request 0 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 172 modcall[authorize]: module \"files\" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type \"EAP\" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Requiring client certificate rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module \"eap\" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 0 to 192.168.0.50 port 1026 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x010100060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdb8384b95c5c85f50f7621620d3cb041 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.0.50:1026, id=1, length=307 Message-Authenticator = 0x70278d02fc3d5048b44f5f934810a98a Service-Type = Framed-User User-Name = \"saravanakumar07\" Framed-MTU = 1488 State = 0xdb8384b95c5c85f50f7621620d3cb041 Called-Station-Id = \"00-0F-3D-AF-DD-C2:default\" Calling-Station-Id = \"00-0E-35-F3-A1-67\" NAS-Identifier = \"D-Link Access Point\" NAS-Port-Type = Wireless-802.11 Connect-Info = \"CONNECT 54Mbps 802.11g\" EAP-Message = 0x020100600d800000005616030100510100004d0301465a79c5ce91ab c2dd387cd382f0fa23cbb8ff9707ff565985a8ecbc27b01216101905323cb152176f2b0259ff77f5 bf4e001600040005000a000900640062000300060013001200630100 NAS-IP-Address = 192.168.0.50 NAS-Port = 1 NAS-Port-Id = \"STA port # 1\" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module \"preprocess\" returns ok for request 1 rlm_realm: No \'@\' in User-Name = \"saravanakumar07\", looking up realm NULL rlm_realm: No such realm \"NULL\" modcall[authorize]: module \"suffix\" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 96 rlm_eap: No EAP Start, assuming it\'s an on-going EAP conversation modcall[authorize]: module \"eap\" returns updated for request 1 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 172 modcall[authorize]: module \"files\" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type \"EAP\" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0051], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 04be], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004c], CertificateRequest TLS_accept: SSLv3 write certificate request A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module \"eap\" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 1 to 192.168.0.50 port 1026 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x0102040a0dc000000563160301004a020000460301465a792dbfc14d 4885fdd76005ddbcfe2a6cf8c2175794ced4fbb4e19c40aae420a32ca697e1a16b040e8a0f5bc02b 95dd31e2ab09b2cedff4227b48b6816f011100040016030104be0b0004ba0004b700022b30820227 30820190a003020102020101300d06092a864886f70d0101040500303b310b300906035504061302 494e310b300906035504081302544e310d300b060355040a1304536966793110300e060355040313 0730377877696669301e170d3037303131333037353834305a170d3038303131333037353834305a 305f310b300906035504061302494e310b3009060355040813 EAP-Message = 0x02544e310d300b060355040a1304536966793110300e060355040313 07303778776966693122302006092a864886f70d01090116136a65796b756d61725f734073696679 2e636f6d30819f300d06092a864886f70d010101050003818d0030818902818100c6f366d39a74d8 b66b561628be123f18f9b0a71f09b98d21b990e9a987d9acf3ceabd01df377e13da987a23f244496 dfc0609e99ee03a9f44e51033cbb84c814d9d3225aacc7c67786fcd193d57c3f5ac16d7d1b835701 52edca9ba9ff99ca4feffcb244551292fad52026afda1f876205e84a26b81cebd89fa03fd97e5f7f db0203010001a317301530130603551d25040c300a06082b06 EAP-Message = 0x010505070301300d06092a864886f70d010104050003818100a4cbb4 e6e8190d840edc9e61637a38ffa423b2a67e8d308c3005b8ec18318e94ddddbac0ccb1a15780c285 de01622608f4caded74bab6f0c9d44dfdeb648e46bdd4de3606e4c7f86e5f86472722db409baffdb 78eb6c7ad267a623e1155af13de26e83f3ce29b4f82baf551b756d2f49e5691cc1d80f6fb253b11e 7a15bf296000028630820282308201eba003020102020100300d06092a864886f70d010104050030 3b310b300906035504061302494e310b300906035504081302544e310d300b060355040a13045369 66793110300e0603550403130730377877696669301e170d30 EAP-Message = 0x37303131333037353830305a170d3038303131333037353830305a30 3b310b300906035504061302494e310b300906035504081302544e310d300b060355040a13045369 66793110300e060355040313073037787769666930819f300d06092a864886f70d01010105000381 8d0030818902818100ec232cf24bd548a586d614994a3f3b9ee699eb64a3bf9a0c90d7bc8afb3984 2c767c3613757b8d38a78ceaa6a499be55dcf997abb9963b3ef406b39f766054d8e37d35859e6bd5 ce686c01eb63a25684afb79cd6796193355bd3ae67eae642701a34d1bc93426ade87434dadfbc8a8 b0cae8137d97d2a267973f2213ebeefcfd0203010001a38195 EAP-Message = 0x308192301d0603551d0e04160414095ab44cec0cb80f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8e3a068f1bbfd8a03b7a3c464a5b951f Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.0.50:1026, id=2, length=217 Message-Authenticator = 0x07c704f23ce2b215715d4a8c9159cfdd Service-Type = Framed-User User-Name = \"saravanakumar07\" Framed-MTU = 1488 State = 0x8e3a068f1bbfd8a03b7a3c464a5b951f Called-Station-Id = \"00-0F-3D-AF-DD-C2:default\" Calling-Station-Id = \"00-0E-35-F3-A1-67\" NAS-Identifier = \"D-Link Access Point\" NAS-Port-Type = Wireless-802.11 Connect-Info = \"CONNECT 54Mbps 802.11g\" EAP-Message = 0x020200060d00 NAS-IP-Address = 192.168.0.50 NAS-Port = 1 NAS-Port-Id = \"STA port # 1\" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module \"preprocess\" returns ok for request 2 rlm_realm: No \'@\' in User-Name = \"saravanakumar07\", looking up realm NULL rlm_realm: No such realm \"NULL\" modcall[authorize]: module \"suffix\" returns noop for request 2 rlm_eap: EAP packet type response id 2 length 6 rlm_eap: No EAP Start, assuming it\'s an on-going EAP conversation modcall[authorize]: module \"eap\" returns updated for request 2 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 172 modcall[authorize]: module \"files\" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type \"EAP\" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module \"eap\" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 2 to 192.168.0.50 port 1026 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x0103016d0d80000005638c150861ea8bc609ed3cfbc030630603551d 23045c305a8014095ab44cec0cb80f8c150861ea8bc609ed3cfbc0a13fa43d303b310b3009060355 04061302494e310b300906035504081302544e310d300b060355040a1304536966793110300e0603 550403130730377877696669820100300c0603551d13040530030101ff300d06092a864886f70d01 010405000381810019a69104ce7b395ddbb7a05ae632f71c590ba34e71b9a57cbe952eabed153fda cb07eb1c8d6db397f1f47a687103025a91b0431e73beac6e788de0af02e7d49e35808652dc4b2db6 0ccbcef9245239c47c785fb5c78c79ed7dd22d60ab6c19727e EAP-Message = 0xaa68ec38e3fc5b6e7716741e1f56eba981970face974b560ba07450e cdf817160301004c0d000044020102003f003d303b310b300906035504061302494e310b30090603 5504081302544e310d300b060355040a1304536966793110300e0603550403130730377877696669 0e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875cf56766634fbc11b84d84a4f6e718 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.0.50:1026, id=3, length=1117 Message-Authenticator = 0xe54da048b9223806a62a068c47b7c90e Service-Type = Framed-User User-Name = \"saravanakumar07\" Framed-MTU = 1488 State = 0x875cf56766634fbc11b84d84a4f6e718 Called-Station-Id = \"00-0F-3D-AF-DD-C2:default\" Calling-Station-Id = \"00-0E-35-F3-A1-67\" NAS-Identifier = \"D-Link Access Point\" NAS-Port-Type = Wireless-802.11 Connect-Info = \"CONNECT 54Mbps 802.11g\" EAP-Message = 0x020303840d800000037a160301034a0b00023a000237000234308202 3030820199a0030201020202011f300d06092a864886f70d0101040500303b310b30090603550406 1302494e310b300906035504081302544e310d300b060355040a1304536966793110300e06035504 03130730377877696669301e170d3037303131393033343135305a170d3038303131393033343135 305a3067310b300906035504061302494e310b300906035504081302544e310d300b060355040a13 0453696679311830160603550403130f7361726176616e616b756d617230373122302006092a8648 86f70d01090116136a65796b756d61725f7340736966792e63 EAP-Message = 0x6f6d30819f300d06092a864886f70d010101050003818d0030818902 818100b6413143a14d8666369a759ccad7ab221e73ec0cc73ad7346a6060b34e8571d1838d97cc4a a7a2f99a4be83b9bb5af5daeb3307909d5a44c9338a43b19b6c1f3ec6232eae8508103741d5eeb9b 4e7f99b3c2b4b283fcef13cc1b34a087e240e2ab94fee8fce66687dd95690b23d20e84551cd24f38 5afb5cdb086f851f9900070203010001a317301530130603551d25040c300a06082b060105050703 02300d06092a864886f70d010104050003818100ca0e708d266de50c32dc92d523eed3b11d4e678e 2d7bdfeffca92e91b3be256b1533f53180c670c7e224671bbc EAP-Message = 0x1b1245c125bd2f3c252da361542f7d43e5b18db9d6904d92d1300a9e 333d7ac7d8a8ec00aa3bed5d0c9f07028b62f004e6bcfbdee18f80740820065ea68c48cca932d6e3 388b9837c944c42ddc92eed2eb668510000082008065cbdb9523b4868aeb3e3eea40b285883ebf84 96b7f244d89bace257b438038cee487a4ef2ad0cfe15a0edfa105f858730b616819ec718463dddab 460213228bde79fbe4c2859867cebcbd17d3f47c3bbe5515e39b61f6f07d5e24e788a0a08b6b1cf1 eaab8166bf96e460583fb1799e38505a5ba4f7085cee6f977063f6eee50f0000820080b378c93e0d afbdce76957a4267d8a5b0f4c156951860235dd7a76e5d95b3 EAP-Message = 0x4ce6e5e6e7619dccfe8bbf67aefafac549dc616660776505de69f257 c83c8b4bab80a68ff4357bdadd15692c286960fc8529e99a5e42f9231b2829387c18f4ad161db288 3593f0ca635ec0bdcef6097356a7441662812d4a6a375d5813a323c1d2a414030100010116030100 209e18fbf55b919db4dd180e6b8e83fb89c40b2c6f4cbce5d68e4ae995ce21127e NAS-IP-Address = 192.168.0.50 NAS-Port = 1 NAS-Port-Id = \"STA port # 1\" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module \"preprocess\" returns ok for request 3 rlm_realm: No \'@\' in User-Name = \"saravanakumar07\", looking up realm NULL rlm_realm: No such realm \"NULL\" modcall[authorize]: module \"suffix\" returns noop for request 3 rlm_eap: EAP packet type response id 3 length 253 rlm_eap: No EAP Start, assuming it\'s an on-going EAP conversation modcall[authorize]: module \"eap\" returns updated for request 3 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 172 modcall[authorize]: module \"files\" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type \"EAP\" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 023e], Certificate chain-depth=1, error=0 --> User-Name = saravanakumar07 --> BUF-Name = 07xwifi --> subject = /C=IN/ST=TN/O=Sify/CN=07xwifi --> issuer = /C=IN/ST=TN/O=Sify/CN=07xwifi --> verify return:1 chain-depth=0, error=0 --> User-Name = saravanakumar07 --> BUF-Name = saravanakumar07 --> subject = /C=IN/ST=TN/O=Sify/CN=saravanakumar07/emailAddress=jeykumar_s@sify .com --> issuer = /C=IN/ST=TN/O=Sify/CN=07xwifi --> verify return:1 TLS_accept: SSLv3 read client certificate A rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], CertificateVerify TLS_accept: SSLv3 read certificate verify A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 modcall[authenticate]: module \"eap\" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 3 to 192.168.0.50 port 1026 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x010400350d800000002b1403010001011603010020a4b68069f91bfe 89b86711eab12ac7b185ae3f93e19ed117db3474cec9a0a321 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f0c01529f5f8c4659b536a349cf23ad Finished request 3 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.0.50:1026, id=4, length=217 Message-Authenticator = 0x1196d3ed2b565d021343c99e3a944592 Service-Type = Framed-User User-Name = \"saravanakumar07\" Framed-MTU = 1488 State = 0x0f0c01529f5f8c4659b536a349cf23ad Called-Station-Id = \"00-0F-3D-AF-DD-C2:default\" Calling-Station-Id = \"00-0E-35-F3-A1-67\" NAS-Identifier = \"D-Link Access Point\" NAS-Port-Type = Wireless-802.11 Connect-Info = \"CONNECT 54Mbps 802.11g\" EAP-Message = 0x020400060d00 NAS-IP-Address = 192.168.0.50 NAS-Port = 1 NAS-Port-Id = \"STA port # 1\" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module \"preprocess\" returns ok for request 4 rlm_realm: No \'@\' in User-Name = \"saravanakumar07\", looking up realm NULL rlm_realm: No such realm \"NULL\" modcall[authorize]: module \"suffix\" returns noop for request 4 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it\'s an on-going EAP conversation modcall[authorize]: module \"eap\" returns updated for request 4 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 172 modcall[authorize]: module \"files\" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type \"EAP\" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap: Freeing handler modcall[authenticate]: module \"eap\" returns ok for request 4 modcall: leaving group authenticate (returns ok) for request 4 Login OK: [saravanakumar07] (from client private-network-1 port 1 cli 00-0E-35-F 3-A1-67) Sending Access-Accept of id 4 to 192.168.0.50 port 1026 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User MS-MPPE-Recv-Key = 0xd1118229ce4eb045b8e560de7206f6440ef2ac0d555fa5b0087 14804431ad5d5 MS-MPPE-Send-Key = 0x97b7769702b6fb9ad8c20b53e48ae889d1197c00da215df9c8e bba0366abbe08 EAP-Message = 0x03040004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = \"saravanakumar07\" Finished request 4 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 0 with timestamp 465a792d Cleaning up request 1 ID 1 with timestamp 465a792d Cleaning up request 2 ID 2 with timestamp 465a792d Cleaning up request 3 ID 3 with timestamp 465a792d Cleaning up request 4 ID 4 with timestamp 465a792d Nothing to do. Sleeping until we see a request. [root@localhost sbin]# Regards Anoop

2 1