November 2008 - Freeradius-Users - lists.freeradius.org

Referencing a redundant-load-balance set within users file
by Tod A. Sandman 15 Nov '08

15 Nov '08

Version: freeradius-2.1.1 I cannot get a redundant-load-balance set to work within a variable expansion in the users file. I added this to the bottom of the instantiate section of radiusd.conf: redundant-load-balance redundant_ldap { ldap1 ldap2 ldap3 } and this to the authorize section of sites-enabled/default: redundant_ldap and I defined the 3 ldap instances in modules/ldap, and this part works fine. But I cannot figure out how to reference redundant_ldap from within the users file. I tried Connect-Info = "%{redundant_ldap:ldap:///dc=rice,dc=edu?riceClass?sub?uid=%u}" but the debug output shows: WARNING: Unknown module "redundant_ldap" in string expansion "%{redundant_ldap:ldap:///dc=rice,dc=edu?riceClass?sub?uid=%u}" I attached the start of the debug output. The whole output was over the 100k limit. Tod Sandman Sr. Systems Administrator Middleware Development & Integration Rice University Voice: 713.348.5816

2 4

LEAP auth failure using hostapd-0.5.9 and freeradius-2.1.1
by Prasad Parab 15 Nov '08

15 Nov '08

Dear All, I trying to authenticate a wireless client using LEAP auth type and have configured the AP to use hostapd-0.5.9 as authenticator.as follows: wireless client <--------------> hostapd-0.5.9 <---------------> freeradius-2.1.1 windows-XP based authenticator Red Hat Fedora-9 user created is as follows in freeradius-2.1.1 "client" Cleartext-Password := "test123" Reply-Message = "Hello, client" Leap is enabled in eap.cnf. Also can see auth success in wireshark captures. Atttached is wireshark capture. Am i doing something wrong in configuring freeradius-2.1.1???? Regards Prasad

2 1

Re: Re: rlm_counter: Failed to open file /etc/raddb/db.daily:, Permission denied
by Romain Mercier 14 Nov '08

14 Nov '08

Hi, I got the same issue and I solved it modifying the file : /usr/local/etc/raddb/radiusd.conf I replaced the line : db_dir = $(raddbdir) By : db_dir = ${raddbdir} I use freeRadius 2.0.5 on a freeBSD 6.3 freeradius-users-request(a)lists.freeradius.org a écrit : > Message: 2 > Date: Thu, 13 Nov 2008 18:21:17 -0500 > From: Ted Lum <freeradius.org(a)tedworld.com> > Subject: Re: rlm_counter: Failed to open file /etc/raddb/db.daily: > Permission denied > To: Alan DeKok <aland(a)deployingradius.com> > Cc: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <491CB66D.2080809(a)tedworld.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > The default user and group have not been modified. > The server DOES NOT run as root. It always starts as root, but changes > its self. > > ...from radiusd.conf > # We STRONGLY recommend that you run the server with as few permissions > # as possible. That is, if you're not using shadow passwords, the > # user and group items below should be set to radius'. > > They are: > > user = radiusd > group = radiusd > > In fact, the db.daily file was created by the application and this is > the sole reason for the file's ownership being what it is. > > In addition I have moved the location to /tmp where everyone has > permission and it still fails. > > This is a ps after "service start radiusd": > UID PID PPID C STIME TTY TIME CMD > radiusd 6909 1 0 Nov12 ? 00:00:00 /usr/sbin/radiusd > > This is a ps after "/usr/sbin/radiusd -X": > UID PID PPID C STIME TTY TIME CMD > radiusd 6998 6933 5 15:48 pts/0 00:00:00 /usr/sbin/radiusd -X > > This is a ps after "strace /usr/sbin/radiusd": > UID PID PPID C STIME TTY TIME CMD > radiusd 7004 1 0 15:50 ? 00:00:00 /usr/sbin/radiusd > > In all cases its running as radiusd. > > So, any more ideas on how to fix this? > > -Ted- > > Alan DeKok wrote: > >> Ted Lum wrote: >> >> >>> Any idea how to fix this? >>> >>> >> Don't edit the default configuration files to break them. >> >> The default configuration files have the server running as root. >> You've changed that to a user who does NOT have permission to read the >> configuration files. >> >> >> >>> Wed Nov 12 21:29:16 2008 : Error: rlm_counter: Failed to open file >>> /etc/raddb/db.daily: Permission denied >>> >>> >> ... >> >> >>> /etc/raddb >>> -rw------- 1 radiusd radiusd 12312 Nov 12 21:29 db.daily >>> >>> >> The server isn't running as user "radiusd/radiusd". Fix that. >> >> >> >>> This works: >>> # /usr/sbin/radiusd -X >>> >>> >> Becuse you're running it as root. >> >> >> >>> This works: >>> # strace /usr/sbin/radiusd >>> >>> >> Because you're running it as root. >> >> >> >>> This does not work: >>> # service radiusd start >>> Starting RADIUS server: [FAILED] >>> >>> >> Because it changes UID's, and does not run as root. >> >> Alan DeKok. >> >> >> > > > -- Romain Mercier Université d'Angers - Direction des Systèmes d'Infrormation Service Systèmes et Réseaux Tel/Fax : 02-41-22-67-62/51 @ : romain.mercier(a)univ-angers.fr

2 2

Re: FreeRADIUS + OpenLDAP + MSCHAPv2
by Tim Gustafson 14 Nov '08

14 Nov '08

> ntlm_auth line is commented out by default. Ok, I see that. >From what I understand, MSCHAPv2 needs access to the unencrypted user password, and OpenLDAP doesn't offer that. I'm guessing I'll have to add an unencrypted password field to the LDAP server to make this work, but that's not been made clear in any documentation. And, how do you tell the FreeRADIUS eap/peap/MSCHAPv2 client to use the LDAP server as opposed to text files or PAM? I'm attaching my radiusd.conf to this e-mail, any comments would be greatly appreciated. I stripped out all the comments and removed the modules I wasn't using (like SQL stuff and unix/PAM/etc). Tim Gustafson SOE Webmaster UC Santa Cruz tjg(a)soe.ucsc.edu 831-459-5354

3 3

2.0.5 - complex multi-ldap server, multi-branch authentication/authorization needed
by Paul, Craig Allen 14 Nov '08

14 Nov '08

We seek to take advantage of FreeRadius 2.0.5's ability to run multiple virtual servers. All our other servers are working except one, which has a complex authentication. As a stand-alone configuration this looks as follows: ################################################################ ## MODULES CONFIGURATION ## ################################################################ modules { ldap dirnet{ server = "directory.sub.main.com" port = 389 identity = "cn=acsAgent,ou=agents,ou=network,dc=main,dc=com" password = xxxxxx basedn = "ou=network,dc=main,dc=com" filter = "(&(objectclass=kuAuthAccount)(uid=%{Stripped-User-Name:-%{User-Name}})) " . . . groupmembership_filter = "(&(objectClass=GroupOfUniqueNames)(uniquemember=uid=%{Stripped-User-Nam e:-%{User-Name}}*)) . . } ldap dirnode{ server = "directory.main.com" port = 389 identity = "cn=wireless-agent,ou=agents,ou=Academic Computing,ou=units,dc=main,dc=com" password = yyyyyyyyyyy basedn = "dc=main,dc=com" filter = "(&(objectclass=kuAuthAccount)(uid=%{Stripped-User-Name:-%{User-Name}})) " groupmembership_filter = "(&(objectClass=kuAuthAccount)(eduPersonEntitlement=*)(uid=%{Stripped-Us er-Name:-%{User-Name}}*)) groupmembership_attribute = eduPersonEntitlement groupname_attribute = eduPersonEntitlement access_attr = uid . . . } server { authenticate { ## Use LDAP Authentication Auth-Type DIRNODE { dirnode } Auth-Type DIRNET { dirnet } } authorize { ## Use LDAP Authorization via files config in 'users' files } And the users file looks like DEFAULT dirnet-Ldap-Group == "cn=AuthorizedGuestVendorMAINAnywhereUsers,ou=IT,ou=groups,ou=network,dc =main,dc=com", Auth-Type := DIRNET Class = "%{dirnet:ldap:///ou=authaccounts,ou=network,dc=main,dc=com?eduPersonEnt itlement?sub?uid=%{User-Name}", Fall-Through = no DEFAULT dirnet-Ldap-Group == "cn=VPNPHONES,ou=IT,ou=groups,ou=network,dc=main,dc=com", Auth-Type := DIRNET Class = "urn:mace:main.com:RINGS:group:main_anywhere:vpnphone", Fall-Through = no DEFAULT User-Profile := "uid=%{Stripped-User-Name:-%{User-Name}},ou=authaccounts,dc=main,dc=com" , Auth-Type := DIRNODE Class = "%{dirnode:ldap:///ou=authaccounts,dc=main,dc=com?eduPersonEntitlement?s ub?uid=%{User-Name}", Fall-Through = no DEFAULT Auth-Type := REJECT Reply-Message = "User Login Rejected" -------------------------- I've gotten as far as: modules { ## LDAP Server configuration ldap { } ## LDAP User-to-Group mapping files { usersfile = ${confdir}/guest_vendor_mainanywhere_users acctusersfile = /dev/null preproxy_usersfile = /dev/null compat = no } } authenticate { ## Use LDAP Authentication (entry in modules/ldap) Auth-Type LDAP { dirnode } Auth-Type LDAP { dirnet } } authorize { ## Use LDAP Authorization via files config in 'users' (entry in modules/ ldap) dirnode dirnet } and the ldap file entries as ldap dirnet { # # Note that this needs to match the name in the LDAP # server certificate, if you're using ldaps. server = "directory.sub.main.com" port = 389 identity = "cn=acsAgent,ou=agents,ou=network,dc=main,dc=com" password = xxxxxx basedn = "ou=network,dc=main,dc=com" filter = "(&(objectclass=kuAuthAccount)(uid=%{Stripped-User-Name:-%{User-Name}})) " . . . groupmembership_filter = "(&(objectClass=GroupOfUniqueNames)(uniquemember=uid=%{Stripped-User-Nam e:-%{User-Name}}*)) . . } ldap dirnode{ server = "directory.main.com" port = 389 identity = "cn=wireless-agent,ou=agents,ou=Academic Computing,ou=units,dc=main,dc=com" password = yyyyyyyyyyy basedn = "dc=main,dc=com" filter = "(&(objectclass=kuAuthAccount)(uid=%{Stripped-User-Name:-%{User-Name}})) " groupmembership_filter = "(&(objectClass=kuAuthAccount)(eduPersonEntitlement=*)(uid=%{Stripped-Us er-Name:-%{User-Name}}*)) groupmembership_attribute = eduPersonEntitlement groupname_attribute = eduPersonEntitlement access_attr = uid . . . } with the users file intact Any suggestions as to how to configure, especially the "authorize" section to allow trying both dirnode and dirnet would be welcome. (As it is now, dirnode auth works, but dirnet doesn't.) Thank you!

1 0

hostapd + freeradius + windows users problem
by Dajul Goa 14 Nov '08

14 Nov '08

Hello, I've setup hostapd 0.5.10-1(with bridge) + freeradius 2.1.1(with mysql) and it works pretty good except one thing: Windows(vista sp1) users when turn their machines off, radacct mess up (this doesn't happened when user request disconnect manually) User "goa" connects and when he turns machine off, new user "host/filteria"(his machine name) appears. Maybe the problems is inside hostapd(which I can't find), but I don't understand why "host/filteria" is updated with "goa" info. Radacct looks like this (hostapd radius_acct_interim_interval=300): Client IP Address Download Login Time Logout Time NAS IP Address NAS Port Session Time Upload User Name - 0.78 MBs 2008-11-12 15:45:06 - 127.0.0.1 0 20 minutes 233.77 KBs goa - 0.81 MBs 2008-11-12 15:45:06 2008-11-12 16:07:06 127.0.0.1 0 22 minutes 244.33 KBs host/filteria Thanks. Debug log for "goa" connect and "host/filteria" disconnect: Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/sql/mysql/counter.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel group = freerad user = freerad including dictionary file /etc/freeradius/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/var/log/freeradius" libdir = "/usr/lib" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.2 require_message_authenticator = no secret = "secret" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "freerad" password = "mysqlpass" radius_db = "freerad" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = yes deletestalesessions = yes num_sql_socks = 5 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to freerad@localhost:/freerad rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret FROM nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Read entry nasname=localhost,shortname=localhost,secret=secret rlm_sql (sql): Adding client 127.0.0.1 (localhost, server=<none>) to clients list rlm_sql (sql): Released sql socket id: 4 Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_sqlcounter Module: Instantiating noresetcounter sqlcounter noresetcounter { counter-name = "Max-All-Session-Time" check-name = "Max-All-Session" key = "User-Name" sqlmod-inst = "sql" query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" reset = "never" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sqlcounter: Reply attribute set to Session-Timeout. rlm_sqlcounter: Counter attribute Max-All-Session-Time is number 11273 rlm_sqlcounter: Check attribute Max-All-Session is number 11274 rlm_sqlcounter: Current Time: 1226501089 [2008-11-12 15:44:49], Next reset 0 [2008-11-12 15:00:00] rlm_sqlcounter: Current Time: 1226501089 [2008-11-12 15:44:49], Prev reset 0 [2008-11-12 15:00:00] Module: Instantiating dailycounter sqlcounter dailycounter { counter-name = "Daily-Session-Time" check-name = "Max-Daily-Session" reply-name = "Session-Timeout" key = "User-Name" sqlmod-inst = "sql" query = "SELECT SUM(acctsessiontime - GREATEST((%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username = '%{%k}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%b'" reset = "daily" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sqlcounter: Reply attribute Session-Timeout is number 27 rlm_sqlcounter: Counter attribute Daily-Session-Time is number 11275 rlm_sqlcounter: Check attribute Max-Daily-Session is number 11276 rlm_sqlcounter: Current Time: 1226501089 [2008-11-12 15:44:49], Next reset 1226530800 [2008-11-13 00:00:00] rlm_sqlcounter: Current Time: 1226501089 [2008-11-12 15:44:49], Prev reset 1226444400 [2008-11-12 00:00:00] Module: Instantiating monthlycounter sqlcounter monthlycounter { counter-name = "Monthly-Session-Time" check-name = "Max-Monthly-Session" reply-name = "Session-Timeout" key = "User-Name" sqlmod-inst = "sql" query = "SELECT SUM(acctsessiontime - GREATEST((%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username='%{%k}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%b'" reset = "monthly" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sqlcounter: Reply attribute Session-Timeout is number 27 rlm_sqlcounter: Counter attribute Monthly-Session-Time is number 11277 rlm_sqlcounter: Check attribute Max-Monthly-Session is number 11278 rlm_sqlcounter: Current Time: 1226501089 [2008-11-12 15:44:49], Next reset 1228086000 [2008-12-01 00:00:00] rlm_sqlcounter: Current Time: 1226501089 [2008-11-12 15:44:49], Prev reset 1225494000 [2008-11-01 00:00:00] Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=108, length=150 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x0201000801676f61 Message-Authenticator = 0x4c0eb88ca3928e1068231df5c10666d8 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 8 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns updated [sql] expand: %{User-Name} -> goa [sql] sql_set_user escaped user --> 'goa' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'goa' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'goa' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'goa' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noresetcounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[dailycounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[monthlycounter] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 108 to 127.0.0.1 port 48290 EAP-Message = 0x010200061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4b9bc6906e64b3cd075565f3 Finished request 88. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=109, length=166 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020200060319 State = 0x4b99d30d4b9bc6906e64b3cd075565f3 Message-Authenticator = 0xbe0ecf56d874c7e7c7468b346602f4c3 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns updated [sql] expand: %{User-Name} -> goa [sql] sql_set_user escaped user --> 'goa' rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'goa' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'goa' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'goa' ORDER BY priority rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noresetcounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[dailycounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[monthlycounter] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 109 to 127.0.0.1 port 48290 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4a9aca906e64b3cd075565f3 Finished request 89. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=110, length=274 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x0203007219800000006816030100630100005f0301491b015f888a66bd71ea6c49b2ece384af9572bde192ccda1309da7212f5bf69000018002f00350005000ac009c00ac013c01400320038001300040100001e000000080006000003676f61000a00080006001700180019000b00020100 State = 0x4b99d30d4a9aca906e64b3cd075565f3 Message-Authenticator = 0x20c3d87287fb00cf7af795ce6ff9c280 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 114 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 104 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0063], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0874], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 110 to 127.0.0.1 port 48290 EAP-Message = 0x0104040019c0000008b1160301002a020000260301491b01672b4a939dceb642dd8c2811cbe1f06a5e3e762ac4f12020a5dd37e31d00002f0016030108740b00087000086d0003b3308203af30820297a003020102020101300d06092a864886f70d0101040500308196310b3009060355040613024553310f300d06035504081306526164697573310f300d0603550407130652616469757331133011060355040a130a44616a756c20496e632e3123302106092a864886f70d0109011614686f73746d61737465724064616a756c2e636f6d312b30290603550403132244616a756c2052616469757320436572746966696361746520417574686f72 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x82010100bc5063282808324084017644002f1320a2ca7147d87a07339ab16fe585a7adeda46c166e4d70dad225e3c033d2db732ddabc7afcb6a7f353948a5398ee06092a1e28ee8077c89113010f1e835bc5bbecdadb52906e8253b186007b6d8cf6aa34a9feb7546785f6c1acbf9bbc8488c28d850025fb714c15d209ac6d7659cfc2158e6a5873d2da1367181b64d2205afe749c7bd1617c647eef50341ac85ded1f9b7a92d4d520ac7e095dbf59b8979bc1bcb07ff7885fcff66aabf9db921ebd507c27d6190e2f447870cddea02c15be593a97701c6f6147b0d98e29b6db0013bd7fd1f5448bf35013a27bde2b83180652f12e09cfeda89faf59d8 EAP-Message = 0xd214a0a4c2b8ed0004b43082 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d499dca906e64b3cd075565f3 Finished request 90. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=111, length=166 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020400061900 State = 0x4b99d30d499dca906e64b3cd075565f3 Message-Authenticator = 0x8b5194c26941cfe5b2446f0fddf56d17 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 111 to 127.0.0.1 port 48290 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xf057eeca59eba2f4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d489cca906e64b3cd075565f3 Finished request 91. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=112, length=166 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020500061900 State = 0x4b99d30d489cca906e64b3cd075565f3 Message-Authenticator = 0xb6419eb7a2496da19c943f473a2aca2f +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 112 to 127.0.0.1 port 48290 EAP-Message = 0x010600cb190067e9d87d8ab1845fe86ca7eb76074bbee06d08efaa166634273cd09614a41449a1664518226423bd66cbac960e2c384aab995b490eb5bc65495f4dc57c318a7204ba8e56b92ddb6efdbf9e3132b7d842f3acc2071f9b4a535c35f5387191a0228b8a0684b637ccb2bece245d05371bebee160f88c011797a594178d5fb81bc9bf23addb740f3f075c20128ab0b093a40119ac34791997773203d830a82a7a5b713a0a339ec55efa00f77cc3d5a618dc4a2f7123fa6c6b5bba3959a9a16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4f9fca906e64b3cd075565f3 Finished request 92. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=113, length=498 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 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 EAP-Message = 0x26d873cc67a33de41063b0db4cfa6132d888f4f914547ff414030100010116030100309325e82e3e311badbfb9ccd2f03a3cb43f6bc7b1d9ca64c3367156a8d177f3afaef558669e9e936a31bd3cf351460884 State = 0x4b99d30d4f9fca906e64b3cd075565f3 Message-Authenticator = 0x787ab3a0f510f1f76e5da0aed3e89288 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 113 to 127.0.0.1 port 48290 EAP-Message = 0x0107004119001403010001011603010030cf1d7acbe5013d38b99800782c599385d8b5d42c039adf684135e503c1c2c044d5f825223a9898d30ad0c5100d0f658b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4e9eca906e64b3cd075565f3 Finished request 93. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=114, length=166 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020700061900 State = 0x4b99d30d4e9eca906e64b3cd075565f3 Message-Authenticator = 0x3c23c41b7444b39a7a32138268b82324 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 114 to 127.0.0.1 port 48290 EAP-Message = 0x0108002b1900170301002025a24ea766072abdd134ba7d281ede6c6fb9ff823de347830359356f048c77ad Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4d91ca906e64b3cd075565f3 Finished request 94. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=115, length=203 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x0208002b190017030100200405ba708c9c0f78c03a5ef5a8eb839953b8d90f51ec88d50f0150394c009a67 State = 0x4b99d30d4d91ca906e64b3cd075565f3 Message-Authenticator = 0xc8c8fd1654ccd9584cffccdaa1e941f6 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - goa [peap] Got tunnled request EAP-Message = 0x0208000801676f61 server (null) { PEAP: Got tunneled identity of goa PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to goa Sending tunneled request EAP-Message = 0x0208000801676f61 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "goa" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns updated [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 8 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [sql] expand: %{User-Name} -> goa [sql] sql_set_user escaped user --> 'goa' rlm_sql (sql): Reserving sql socket id: 1 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'goa' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'goa' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'goa' ORDER BY priority rlm_sql (sql): Released sql socket id: 1 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x0109001d1a01090018105de803fdedfed73165bb3558532f3a66676f61 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9f97f2289f9ee8e87c9460d74b6eb272 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x0109001d1a01090018105de803fdedfed73165bb3558532f3a66676f61 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9f97f2289f9ee8e87c9460d74b6eb272 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 115 to 127.0.0.1 port 48290 EAP-Message = 0x0109003b1900170301003024eefe1cd498c25520f7809d9828616262290187eaf4ae03babd72427c4302fc327858b70e1052e1d224257fb98e9f27 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4c90ca906e64b3cd075565f3 Finished request 95. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=116, length=251 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x0209005b190017030100506d3e13b8540005c9c6ef7e20faf4e42524ee39e9a44b53d9c788900799b5d1ec9bf6057cd9323e6048833ae5e230630f7fd728c4ca53c4d07a739fa843486507f6bd44336d98c83c549b36b561c38c32 State = 0x4b99d30d4c90ca906e64b3cd075565f3 Message-Authenticator = 0x9bd316eea408ac5b0de657e498a5a53d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 91 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x0209003e1a0209003931709030ad20b0b3eb42cb7d6e17c51aa80000000000000000140b10b852f4fd9c9cf8fc39913ddd3d1f08cf5795d607e500676f61 server (null) { PEAP: Setting User-Name to goa Sending tunneled request EAP-Message = 0x0209003e1a0209003931709030ad20b0b3eb42cb7d6e17c51aa80000000000000000140b10b852f4fd9c9cf8fc39913ddd3d1f08cf5795d607e500676f61 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "goa" State = 0x9f97f2289f9ee8e87c9460d74b6eb272 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns updated [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 62 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [sql] expand: %{User-Name} -> goa [sql] sql_set_user escaped user --> 'goa' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'goa' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'goa' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'goa' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv2 for goa with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010a00331a0309002e533d30343843463441444337434241393532393142303043444332394544424234303646383730443933 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9f97f2289e9de8e87c9460d74b6eb272 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010a00331a0309002e533d30343843463441444337434241393532393142303043444332394544424234303646383730443933 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9f97f2289e9de8e87c9460d74b6eb272 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 116 to 127.0.0.1 port 48290 EAP-Message = 0x010a005b19001703010050255f8238122fa05ddc0d3817587da401d00faad7956cd93c1526324d08fc2d7584e8db57472102e78553f9ddbd8832a094f6e95e73bdf1f7f6ed48451dc94b2cc38a4a4f0b689e5004fd402142eb8dfd Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4393ca906e64b3cd075565f3 Finished request 96. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=117, length=203 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020a002b190017030100204735c1a490cf40c01270af0846512c40b7aebee97bc1c0765a30c39d869fd529 State = 0x4b99d30d4393ca906e64b3cd075565f3 Message-Authenticator = 0x7813a24cc33a1dcc3f257e9cb9a1e027 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x020a00061a03 server (null) { PEAP: Setting User-Name to goa Sending tunneled request EAP-Message = 0x020a00061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "goa" State = 0x9f97f2289e9de8e87c9460d74b6eb272 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns updated [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [sql] expand: %{User-Name} -> goa [sql] sql_set_user escaped user --> 'goa' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'goa' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'goa' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'goa' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok Login OK: [goa] (from client localhost port 0 via TLS tunnel) } # server inner-tunnel [peap] Got tunneled reply code 2 EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "goa" [peap] Got tunneled reply RADIUS code 2 EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "goa" [peap] Tunneled authentication was successful. [peap] SUCCESS ++[eap] returns handled Sending Access-Challenge of id 117 to 127.0.0.1 port 48290 EAP-Message = 0x010b002b190017030100202a9483874a219f046d6e6c787f476a4d3cfa7225f495b39abdb1178a34c6129e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4b99d30d4292ca906e64b3cd075565f3 Finished request 97. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=118, length=203 User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020b002b190017030100206d08dd866d33934b1081d00d1fca1aec1d077d601f4f81dc1844b63eee41c189 State = 0x4b99d30d4292ca906e64b3cd075565f3 Message-Authenticator = 0xc02bcc0d9ae87af86070f84534d8439d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 11 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Success [eap] Freeing handler ++[eap] returns ok Login OK: [goa] (from client localhost port 0 cli 00-60-B3-FE-3E-57) +- entering group post-auth {...} [sql] expand: %{User-Name} -> goa [sql] sql_set_user escaped user --> 'goa' [sql] expand: %{User-Password} -> [sql] expand: %{Chap-Password} -> [sql] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'goa', '', 'Access-Accept', '2008-11-12 17:16:39') rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'goa', '', 'Access-Accept', '2008-11-12 17:16:39') rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[exec] returns noop Sending Access-Accept of id 118 to 127.0.0.1 port 48290 MS-MPPE-Recv-Key = 0x2fb199cd608728bd36632ecd4c5127e09652af4f10a9470ec2f3c7ed36216ff5 MS-MPPE-Send-Key = 0x7cc8961a7623da969486d294530cb4f92180bfa429b8043a5b2c5f242d50b5e4 EAP-Message = 0x030b0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "goa" Finished request 98. Going to the next request Waking up in 4.9 seconds. rad_recv: Accounting-Request packet from host 127.0.0.1 port 48750, id=119, length=147 Acct-Session-Id = "491AE8D8-00000005" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "goa" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 127.0.0.1,NAS-IP-Address = 127.0.0.1,Acct-Session-Id = "491AE8D8-00000005",User-Name = "goa"' [acct_unique] Acct-Unique-Session-ID = "fdadf057d3e7bf59". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "goa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop +- entering group accounting {...} ++[unix] returns ok [radutmp] expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp [radutmp] expand: %{User-Name} -> goa ++[radutmp] returns ok [sql] expand: %{User-Name} -> goa [sql] sql_set_user escaped user --> 'goa' [sql] expand: %{Acct-Delay-Time} -> [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok [attr_filter.accounting_response] expand: %{User-Name} -> goa attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 119 to 127.0.0.1 port 48750 Finished request 99. Cleaning up request 99 ID 119 with timestamp +5510 Going to the next request Waking up in 4.9 seconds. Cleaning up request 88 ID 108 with timestamp +5509 Cleaning up request 89 ID 109 with timestamp +5509 Cleaning up request 90 ID 110 with timestamp +5510 Cleaning up request 91 ID 111 with timestamp +5510 Cleaning up request 92 ID 112 with timestamp +5510 Cleaning up request 93 ID 113 with timestamp +5510 Cleaning up request 94 ID 114 with timestamp +5510 Cleaning up request 95 ID 115 with timestamp +5510 Cleaning up request 96 ID 116 with timestamp +5510 Cleaning up request 97 ID 117 with timestamp +5510 Cleaning up request 98 ID 118 with timestamp +5510 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=120, length=170 User-Name = "host/filteria" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020c001201686f73742f66696c7465726961 Message-Authenticator = 0xd1b21268ceb7ac27768204f1e67600ca +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "host/filteria", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 12 length 18 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [sql] expand: %{User-Name} -> host/filteria [sql] sql_set_user escaped user --> 'host/filteria' rlm_sql (sql): Reserving sql socket id: 1 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'host/filteria' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'host/filteria' ORDER BY priority rlm_sql (sql): Released sql socket id: 1 [sql] User host/filteria not found ++[sql] returns notfound ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noresetcounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[dailycounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[monthlycounter] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 120 to 127.0.0.1 port 48290 EAP-Message = 0x010d00061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf8f4575ff8f942716e1298eab8e3a233 Finished request 100. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=121, length=176 User-Name = "host/filteria" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020d00060319 State = 0xf8f4575ff8f942716e1298eab8e3a233 Message-Authenticator = 0x404527658f155043ada1b3ddaf9e226e +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "host/filteria", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 13 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [sql] expand: %{User-Name} -> host/filteria [sql] sql_set_user escaped user --> 'host/filteria' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'host/filteria' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'host/filteria' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 [sql] User host/filteria not found ++[sql] returns notfound ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noresetcounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[dailycounter] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[monthlycounter] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 121 to 127.0.0.1 port 48290 EAP-Message = 0x010e00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf8f4575ff9fa4e716e1298eab8e3a233 Finished request 101. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=122, length=289 User-Name = "host/filteria" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020e007719800000006d1603010068010000640301491b017fff9c81449db04ff624ad25c38998bfc079eb4f3637f8feb0423fad0f000018002f00350005000ac009c00ac013c0140032003800130004010000230000000d000b00000866696c7465726961000a00080006001700180019000b00020100 State = 0xf8f4575ff9fa4e716e1298eab8e3a233 Message-Authenticator = 0x315eafc4de1a9c304ba4a4b2d9d26fb0 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "host/filteria", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 14 length 119 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 109 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0068], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0874], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 122 to 127.0.0.1 port 48290 EAP-Message = 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 EAP-Message = 0x697479301e170d3038313130383233343733375a170d3138313130363233343733375a308185310b3009060355040613024553310f300d0603550408130652616469757331133011060355040a130a44616a756c20496e632e312b30290603550403132244616a756c2052616469757320436572746966696361746520417574686f726974793123302106092a864886f70d0109011614686f73746d61737465724064616a756c2e636f6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100c953091b7003769d774816aeee6b74d2fec7daf3acdfba5f0a734eb816ca61219ac489aeb8a92fb1b83672e4cbb6fba4c6 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xd214a0a4c2b8ed0004b43082 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf8f4575ffafb4e716e1298eab8e3a233 Finished request 102. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=123, length=176 User-Name = "host/filteria" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x020f00061900 State = 0xf8f4575ffafb4e716e1298eab8e3a233 Message-Authenticator = 0x7d8e76c82407efe9a4c2da7af3bccf41 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "host/filteria", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 15 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 123 to 127.0.0.1 port 48290 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xf057eeca59eba2f4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf8f4575ffbe44e716e1298eab8e3a233 Finished request 103. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=124, length=176 User-Name = "host/filteria" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x021000061900 State = 0xf8f4575ffbe44e716e1298eab8e3a233 Message-Authenticator = 0xc0a0aa3b5e27956b05ab0be22a8faf90 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "host/filteria", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 16 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 124 to 127.0.0.1 port 48290 EAP-Message = 0x011100cb190067e9d87d8ab1845fe86ca7eb76074bbee06d08efaa166634273cd09614a41449a1664518226423bd66cbac960e2c384aab995b490eb5bc65495f4dc57c318a7204ba8e56b92ddb6efdbf9e3132b7d842f3acc2071f9b4a535c35f5387191a0228b8a0684b637ccb2bece245d05371bebee160f88c011797a594178d5fb81bc9bf23addb740f3f075c20128ab0b093a40119ac34791997773203d830a82a7a5b713a0a339ec55efa00f77cc3d5a618dc4a2f7123fa6c6b5bba3959a9a16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf8f4575ffce54e716e1298eab8e3a233 Finished request 104. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 48290, id=125, length=176 User-Name = "host/filteria" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x021100061900 State = 0xf8f4575ffce54e716e1298eab8e3a233 Message-Authenticator = 0x4ad12dfa1a0338fc14f8c4d528a93e75 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "host/filteria", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 17 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 125 to 127.0.0.1 port 48290 EAP-Message = 0x011200061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf8f4575ffde64e716e1298eab8e3a233 Finished request 105. Going to the next request Waking up in 4.8 seconds. rad_recv: Accounting-Request packet from host 127.0.0.1 port 48750, id=126, length=199 Acct-Session-Id = "491AE8D8-00000005" Acct-Status-Type = Stop Acct-Authentic = RADIUS User-Name = "host/filteria" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Called-Station-Id = "00-13-F7-27-52-EE:Debian Lenny" Calling-Station-Id = "00-60-B3-FE-3E-57" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" Acct-Session-Time = 32 Acct-Input-Packets = 153 Acct-Output-Packets = 18 Acct-Input-Octets = 17918 Acct-Output-Octets = 3659 Event-Timestamp = "Nov 12 2008 17:17:11 CET" Acct-Terminate-Cause = User-Request +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 127.0.0.1,NAS-IP-Address = 127.0.0.1,Acct-Session-Id = "491AE8D8-00000005",User-Name = "host/filteria"' [acct_unique] Acct-Unique-Session-ID = "26b8b12308938e2c". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "host/filteria", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop +- entering group accounting {...} ++[unix] returns ok [radutmp] expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp [radutmp] expand: %{User-Name} -> host/filteria ++[radutmp] returns ok [sql] expand: %{User-Name} -> host/filteria [sql] sql_set_user escaped user --> 'host/filteria' [sql] expand: %{Acct-Input-Gigawords} -> [sql] expand: %{Acct-Input-Octets} -> 17918 [sql] expand: %{Acct-Output-Gigawords} -> [sql] expand: %{Acct-Output-Octets} -> 3659 [sql] expand: %{Acct-Delay-Time} -> [sql] expand: UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}' -> UPDATE radacct SET acctstoptime = '2008-11-12 17:17:11', acctsessiontime = '32', acctinputoctets = '0' << 32 | '17918', acctoutputoctets = '0' << 32 | rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: %{Acct-Session-Time} -> 32 [sql] expand: %{Acct-Delay-Time} -> [sql] expand: %{Acct-Input-Gigawords} -> [sql] expand: %{Acct-Input-Octets} -> 17918 [sql] expand: %{Acct-Output-Gigawords} -> [sql] expand: %{Acct-Output-Octets} -> 3659 [sql] expand: %{Acct-Delay-Time} -> [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Inpu rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok [attr_filter.accounting_response] expand: %{User-Name} -> host/filteria attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 126 to 127.0.0.1 port 48750 Finished request 106. Cleaning up request 106 ID 126 with timestamp +5542 Going to the next request Waking up in 4.7 seconds. Cleaning up request 100 ID 120 with timestamp +5542 Cleaning up request 101 ID 121 with timestamp +5542 Cleaning up request 102 ID 122 with timestamp +5542 Cleaning up request 103 ID 123 with timestamp +5542 Cleaning up request 104 ID 124 with timestamp +5542 Waking up in 0.1 seconds. Cleaning up request 105 ID 125 with timestamp +5542 Ready to process requests.

6 16

[main_pool] Could not find Pool-Name attribute
by robbe 14 Nov '08

14 Nov '08

Hello I'm trying to use the ippool for wlan users. But without success. I now get tis error: [main_pool] Could not find Pool-Name attribute . And I have no idea why. The logile can be read at: http://pastebin.com/m50a78a30 Thanks for every help. robbe -- View this message in context: http://www.nabble.com/-main_pool--Could-not-find-Pool-Name-attribute-tp2048… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

Wpa Supplicant on Win XP with SP 2
by Queenie de Melo 14 Nov '08

14 Nov '08

Dear All, Iam using Windows XP with service Pack 2 with D-Link USB client DWL-G122 When I use windows as my suplicant, I do not get all the optioons supported by my AP. But In case I RightClick on the wireless connection in the Network connections, and goto properties-- > Wireless Network tab and uncheck option Use windows to configure my wireless network settings, then my D-Link Utility pops up with gives me all the options ex: PEAP with MD5 (windows gives me only PEAP with MSCHAPv2 option only) Is there anyone who has faced the same and resolved it. Does windows need a patch etc? Pl help. Warm regards Queenie

2 1

Error in initializing EAP module
by Nayan Gjain 13 Nov '08

13 Nov '08

I am trying to run freeradius server on linux2.4 version I am able to ./configure, make, make install successfully. But when i am running this with -X(debugging), I am getting the following error message on server: rlm_eap:Failed to link EAP-Type/aka:file not found /usr/localetc/raddb/eap.conf[17]:Instantiation failed for module "eap" /usr/local/etc/raddb/sites-enabled/inner-tunnel[223]:failed to find module "eap" /usr/local/etc/raddb/sites-enabled/inner-tunnel[176]:Errors parsing authentication section } } Error initialising modules This same freeradius server is working properly on linux2.6 version. can anyone help me !!!!! Warm Regards, NAYAN JAIN (280609) SE (Software Engineer - 50PE) ______________________________________________________________________

3 11

Opendirectory with group checking
by Paul Bartell 13 Nov '08

13 Nov '08

Hello, I have successfully set up freeradius on OSX 10.5 with recent CVS version of freeradius, and am confused as to how i would only allow users within a specified group to be allowed access. Mainly, where do i define GroupName? (or am i not understanding http://wiki.freeradius.org/Rlm_ldap quite right?) -- Random quote of the week/month/whenever i get to updating it: "Opportunity knocked. My doorman threw him out." - Adrienne Gusoff "At school you don't get parole, good behavior only brings a longer sentence." - The History Boys

1 0