December 2008 - Freeradius-Users - lists.freeradius.org

radius with with login-time
by jerry kwajaffa 15 Dec '08

15 Dec '08

i m trying to set up freeradius 2.1.1 for wireless authentication with login time but it ignores the time span. what did i do wrong, below is the radiusd -X output and /raddb/users attr eeRADIUS Version 2.1.1, for host i686-pc-linux-gnu, built on Dec 3 2008 at 19:20:03 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Ignoring EAP-Type/tls because we do not have OpenSSL support. Ignoring EAP-Type/ttls because we do not have OpenSSL support. Ignoring EAP-Type/peap because we do not have OpenSSL support. Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } [/usr/local/etc/raddb/users]:76 WARNING! Check item "Login-Time" found in reply item list for user "steve". This attribute MUST go on the first line with the other check items [/usr/local/etc/raddb/users]:76 WARNING! Check item "Expiration" found in reply item list for user "steve". This attribute MUST go on the first line with the other check items [/usr/local/etc/raddb/users]:76 WARNING! Check item "Simultaneous-Use" found in reply item list for user "steve". This attribute MUST go on the first line with the other check items Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. /raddb/users steve Cleartext-Password := "testing" Login-Time = "Al1900-2000", Expiration := "23 Dec 2008", Session-Timeout <= 200, Simultaneous-Use = 1, Service-Type = Framed-User, # Framed-Protocol = PPP,

3 2

rlm_perl help required
by Saeed Akhtar 15 Dec '08

15 Dec '08

Hi all, I want to use perl for authorize and accounting function in freeradius. I have successfully configured perl. Now I have a little problem, I don't know how to tell freeradius that reply with Access-Accept message. Because rlm_module_ok tells that this module executed successfully. Now I want to ask how will I tell freeradius that reply with Access-Accept. Because if I just give a message in RAD_REPLY{'Reply-Message'} and then end my function with return RLM_MODULE_OK, freeradius sends Access-Reject packet with my Reply-Message. Can anybody please help me. Thanks Regards, Saeed Akhtar

2 1

Need Help on Radius - accounting respond
by Do Nguyen Ha 15 Dec '08

15 Dec '08

Hi all the FR receive the accounting request: rad_recv: Accounting-Request packet from host 172.26.0.8 port 1645, id=186, length=399 User-Name = "0873000001" NAS-IP-Address = 0.0.0.0 Service-Type = Dialout-Framed-User Class = 0x436c6173733d333030 Cisco-AVPair = "h323-incoming-conf-id=b97aff16 c99911dd 8125d127 98296413 " h323-conf-id = "h323-conf-id=b97aff16 c99911dd 8125d127 98296413 " h323-setup-time = "h323-setup-time= 4:43:17.000 UTC Mon Dec 15 2008" h323-connect-time = "h323-connect-time= 4:43:21.000 UTC Mon Dec 15 2008" h323-call-type = "h323-call-type=VOIP" Called-Station-Id = "0873000012" Calling-Station-Id = "0873000001" Acct-Status-Type = Start Acct-Session-Id = "b97aff16 c99911dd 8125d127 98296413 " Event-Timestamp = "Dec 15 2008 11:43:21 ICT" NAS-Port-Type = Ethernet then FR should send accounting respond : h323-credit-amount=customer balance at the time of authentication h323-return-code=0(accept)/2(reject) h323-billing-model=2 but FR send: Sending Accounting-Response of id 192 to 172.26.0.8 port 1645 can the FR do that? if yes, where should i edit if i want to send response to NAS i should add the attribute in the attrs.accounting-response : h323-credit-amount=* ANY h323-return-code=* ANY h323-billing-model=* ANY i check the attrs.accounting-reponse: # # Configuration file for the rlm_attr_filter module. # Please see rlm_attr_filter(5) manpage for more information. # # $Id$ # # This configuration file is used to remove almost all of the attributes # From an Accounting-Response message. The RFC's say that an # Accounting-Response packet can contain only a few attributes. # We enforce that here. # DEFAULT Vendor-Specific =* ANY, Message-Authenticator =* ANY, Proxy-State =* ANY, 1 more question: i read the man unlang times but cannot figure out how to use it could you give the example for specific case such as Access Reject/ update the Access Reject/Accept Thanks Ha`

2 1

Re: Is it possible to use FreeRADIUS as AAA in a Cellular Network?
by Aldo Zavala 15 Dec '08

15 Dec '08

Thanks Ranil Santhis and Luis Carlos Toledo for your reply, I have read in the PDSN GUI help that the interface for AAA must be a logic interface, then I looked in the PDSN configuration and I found two PI (logical) interfaces, here the part of PDSN config that I think is AAA related: [conf] # interface Piif3/0/0 ip address 192.168.1.2 255.255.255.255 # interface Rpif3/0/0 ip address 192.168.1.1 255.255.255.255 # a11 enable pcf 192.168.0.200 192.168.1.1 256 skey 1234567891234567 # construct domain huawei domain enable domain AAAclientsig 1 domain address-group huawei 0 0 10.0.0.51 50 domain dns huawei 0 209.145.204.26 bip 209.145.204.20 # charge enable weekday 6 1 weekday 5 0 weekday 4 0 weekday 3 0 weekday 2 0 weekday 1 0 weekday 0 1 # [/conf] - Can please tell me if this is what I need to co nfigure the PDSN with the FreeRADIUS? - What should I start configuring in the FreeRADIUS side? - Also, I was googling and didnt found what A11 is and why we need it here, can please tellme something about that? Thanks again guys.

2 1

Is it possible to use FreeRADIUS as AAA in a Cellular Network?
by Aldo Zavala 14 Dec '08

14 Dec '08

Hello to all, is it possible to use FreeRADIUS as AAA for EVDO and other Data sevices in a Cellular Network? Thanks, Aldo Zavala Mobile (760) 556-5050 GTalk: aldo.zavala(a)gmail.com

3 6

Slightly OT: Problem with Vista
by Sergio Belkin 14 Dec '08

14 Dec '08

I have a problem with a Laptop with Vista (EAP-PEAP, and EAP-TTLS either won't work) tcpdump on access point outputs: 00:09:53.610223 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 72: 0x0000: 8001 0064 0000 1018 0001 0001 0000 0000 ...d............ 0x0010: 000c 0000 0000 0000 0008 0000 0000 0000 ................ 0x0020: 0000 001f 3a1b 4e8b 776c 3000 0000 d23f ....:.N.wl0....? 0x0030: 0000 0000 0000 e000 0000 .......... 00:09:54.143589 00:1f:3a:1b:4e:8b (oui Unknown) > Broadcast Null Unnumbered, xid, Flags [Command], length 6: 01 00 00:09:54.143758 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 98: 0x0000: 8001 007e 0000 1018 0001 0001 0000 0000 ...~............ 0x0010: 0008 0000 0000 0000 0000 0000 0000 0000 ................ 0x0020: 001a 001f 3a1b 4e8b 776c 3000 0000 d23f ....:.N.wl0....? 0x0030: 0000 0000 0000 e000 dd18 0050 f201 0100 ...........P.... 0x0040: 0050 f202 0100 0050 f202 0100 0050 f201 .P.....P.....P.. 0x0050: 0000 .. 00:09:54.167468 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 77: 0x0000: 8001 0069 0000 1018 0001 0001 0000 0000 ...i............ 0x0010: 0019 0000 0000 0000 0000 0000 0000 0000 ................ 0x0020: 0005 001f 3a1b 4e8b 776c 3000 0000 d23f ....:.N.wl0....? 0x0030: 0000 0000 0000 e000 0101 0000 0000 00 ............... 00:09:54.167512 EAP code=1 id=1 length=0 00:10:25.005568 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 72: 0x0000: 8001 0064 0000 1018 0001 0001 0000 0000 ...d............ 0x0010: 000c 0000 0000 0000 0008 0000 0000 0000 ................ 0x0020: 0000 001f 3a1b 4e8b 776c 3000 00c0 c980 ....:.N.wl0..... 0x0030: 0000 0000 5440 b600 0000 ....T@.... 00:10:25.561783 00:1f:3a:1b:4e:8b (oui Unknown) > Broadcast Null Unnumbered, xid, Flags [Command], length 6: 01 00 00:10:25.561952 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 98: 0x0000: 8001 007e 0000 1018 0001 0001 0000 0000 ...~............ 0x0010: 0008 0000 0000 0000 0000 0000 0000 0000 ................ 0x0020: 001a 001f 3a1b 4e8b 776c 3000 00c0 c980 ....:.N.wl0..... 0x0030: 0000 0000 5440 b600 dd18 0050 f201 0100 ....T@.....P.... 0x0040: 0050 f202 0100 0050 f202 0100 0050 f201 .P.....P.....P.. 0x0050: 0000 .. 00:10:25.585979 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 77: 0x0000: 8001 0069 0000 1018 0001 0001 0000 0000 ...i............ 0x0010: 0019 0000 0000 0000 0000 0000 0000 0000 ................ 0x0020: 0005 001f 3a1b 4e8b 776c 3000 00c0 c980 ....:.N.wl0..... 0x0030: 0000 0000 5440 b600 0101 0000 0000 00 ....T@......... 00:10:25.586025 EAP code=1 id=1 length=0 00:10:34.792686 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 72: 0x0000: 8001 0064 0000 1018 0001 0001 0000 0000 ...d............ 0x0010: 000c 0000 0000 0000 0008 0000 0000 0000 ................ 0x0020: 0000 001f 3a1b 4e8b 776c 3000 6c63 5f63 ....:.N.wl0.lc_c 0x0030: 6c6b 6374 6c5f 6300 0000 lkctl_c... 00:10:35.321712 00:1f:3a:1b:4e:8b (oui Unknown) > Broadcast Null Unnumbered, xid, Flags [Command], length 6: 01 00 00:10:35.321878 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 98: 0x0000: 8001 007e 0000 1018 0001 0001 0000 0000 ...~............ 0x0010: 0008 0000 0000 0000 0000 0000 0000 0000 ................ 0x0020: 001a 001f 3a1b 4e8b 776c 3000 6c63 5f63 ....:.N.wl0.lc_c 0x0030: 6c6b 6374 6c5f 6300 dd18 0050 f201 0100 lkctl_c....P.... 0x0040: 0050 f202 0100 0050 f202 0100 0050 f201 .P.....P.....P.. 0x0050: 0000 .. 00:10:35.344361 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 77: 0x0000: 8001 0069 0000 1018 0001 0001 0000 0000 ...i............ 0x0010: 0019 0000 0000 0000 0000 0000 0000 0000 ................ 0x0020: 0005 001f 3a1b 4e8b 776c 3000 6c63 5f63 ....:.N.wl0.lc_c 0x0030: 6c6b 6374 6c5f 6300 0101 0000 0000 00 lkctl_c........ 00:10:35.344405 EAP code=1 id=1 length=0 00:10:40.337072 02:1d:7e:dc:22:d9 (oui Unknown) > 00:1d:7e:dc:22:d9 (oui Unknown), ethertype Unknown (0x886c), length 77: 0x0000: 8001 0069 0000 1018 0001 0001 0000 0000 ...i............ 0x0010: 0019 0000 0000 0000 0000 0000 0000 0000 ................ 0x0020: 0005 001f 3a1b 4e8b 776c 3000 1000 0000 ....:.N.wl0..... 0x0030: 5000 0000 fc59 fb00 0101 0000 0000 00 P....Y......... 00:10:40.337119 EAP code=1 id=1 length=0 Please, what could be the problem? Thanks in advance -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

3 3

Re: R: R: Postgress SQL connections
by Alan DeKok 14 Dec '08

14 Dec '08

Massimiliano Tarquini wrote: > It seems to be exactly what is happening. > I have noticed a new think. When the radius crash, the database > administration interface continue showing the connection to the radius. > Using netstat onto the radius server there are no connection to the database > SERVER. > Is it possible? Yes. It's exactly what I have been trying to say. > May be the firewall? As I said, yes, it's the firewall. Stop trying to debug the problem. Stop trying to understand it. Go fix the firewall so that it doesn't destroy your network. Alan DeKok.

1 0

Re: R: Postgress SQL connections
by Alan DeKok 14 Dec '08

14 Dec '08

Massimiliano Tarquini wrote: > We are using the same freeradius as a proxy and it works fine running onto a > different machine. > The proxy auth the outer EAP-TTLS then asks to the radius to auth the inner. That still isn't a very clear description of the network configuration. > There is a firewall between the radius and the database (not between the > proxy and the database). May the firewall cause the problem? Yes. I've never understood why people put firewalls between critical network services. And *then* configure the firewalls to time out inactive connections. In this case, what's happening is this: - FreeRADIUS asks the Postgresql client library to open a socket to the server. - it does - 10 minutes later, the firewall decides that the TCP connection is unused, and discards all knowledge of it - FreeRADIUS receives a new request, and asks the postgresql client library to do an SQL query. - the postgresql library believes that the connection is still up, and tries to use it. - the firewall discards ALL packets for the connection - the kernel blocks all reads && writes that the postgresql client library tries to do.. - which then blocks FreeRADIUS. In short, configuring the firewall to discard sessions after 10 minutes or so of idle time is bad. *Especially* because the connections between FreeRADIUS && the DB are idle for longer than that. This is *not* a problem with FreeRADIUS. You have configured your firewall so that *it* is blocking the server. Fix your firewall, or remove it. Nothing else will solve the problem. Alan DeKok.

2 1

Re: Postgress SQL connections
by Alan DeKok 14 Dec '08

14 Dec '08

Massimiliano Tarquini wrote: > We have a full installation on freeradius 2.1.1 using postgreSql 8.1 running > onto 2 different machines. > The auth work fine 8we have tested it for two days with a killer script that > tests in continuously) but if the proxy What proxy? You haven't explained how you have the network set up. > stops sending auth requests for a > few minutes (sometimes 15, sometimes 40), at the first request freeradius > start malefunctioning. > Following the log content > > ---------------------------------------------------------------------------- > -------------------------------- > Sat Dec 13 16:19:38 2008 : Error: Discarding duplicate request from client ... > Sat Dec 13 16:20:01 2008 : Error: WARNING: Unresponsive child for request > 11657, in module sql component authorize That usually means that the database has blocked the server. The server is calling the DB client API to get data, and the API isn't returning. > Sat Dec 13 16:20:43 2008 : Info: rlm_sql (sql): There are no DB handles to > use! skipped 0, tried to connect 0 This happens when all of the DB connections are blocked. > Which is really strange is that the connections to the database are up and > the database works fine. The connections *exist*, but the server is telling you that they are not working. If the databse is working fine, then the problem is the DB client API. > After some retry the radius crash. See doc/bugs for instructions on what to do when this happens. > We tried to schedule a -HUP signal every 5 minutes, but it has non effect. The DB client API will likely re-try on interrupt signals. Alan DeKok.

2 1

freeradius 2.1.1 and postgres communication problem
by m.tarquini＠4it.it 14 Dec '08

14 Dec '08

Hi all, i’m sperimenting a strange problem using freeradius. We have a full installation on freeradius 2.1.1 using postgreSql 8.1 running onto 2 different machines. The auth work fine 8we have tested it for two days with a killer script that tests in continuously) but if the proxy stops sending auth requests for a few minutes (sometimes 15, sometimes 40), at the first request freeradius start malefunctioning. Following the log content ------------------------------------------------------------------------------------------------------------ Sat Dec 13 16:19:38 2008 : Error: Discarding duplicate request from client csnradpvip port 1814 - ID: 28 due to unfinished request 11657 Sat Dec 13 16:19:41 2008 : Error: Discarding duplicate request from client csnradpvip port 1814 - ID: 28 due to unfinished request 11657 Sat Dec 13 16:19:44 2008 : Error: Discarding duplicate request from client csnradpvip port 1814 - ID: 28 due to unfinished request 11657 Sat Dec 13 16:19:47 2008 : Error: Discarding duplicate request from client csnradpvip port 1814 - ID: 28 due to unfinished request 11657 Sat Dec 13 16:19:50 2008 : Error: Discarding duplicate request from client csnradpvip port 1814 - ID: 28 due to unfinished request 11657 Sat Dec 13 16:19:53 2008 : Error: Discarding duplicate request from client csnradpvip port 1814 - ID: 28 due to unfinished request 11657 Sat Dec 13 16:20:01 2008 : Error: WARNING: Unresponsive child for request 11657, in module sql component authorize Sat Dec 13 16:20:07 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:13 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:19 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:25 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:31 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:37 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:43 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:49 2008 : Error: Received conflicting packet from client csnradpvip port 1814 - ID: 90 due to unfinished request 11627. Giving up on old request. Sat Dec 13 16:20:49 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:20:55 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:21:01 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 Sat Dec 13 16:21:07 2008 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 -------------------------------------------------------------------------------------------------------------- Which is really strange is that the connections to the database are up and the database works fine. After some retry the radius crash. We tried to schedule a -HUP signal every 5 minutes, but it has non effect. Please help me! -- This message was sent on behalf of m.tarquini(a)4it.it at openSubscriber.com http://www.opensubscriber.com/messages/freeradius-users@lists.freeradius.or…

1 0