February 2008 - Freeradius-Users - lists.freeradius.org

mideye authentication
by Norbert Wegener 03 Mar '08

03 Mar '08

One of our customers uses an authentication service from Mideye, which is described this way: The end-user requests access to a protected application, and is prompted for a user name and password. If the correct credentials have been provided, a one- time password (OTP) is presented on the user's mobile phone. The user is requested to enter the OTP, and if the correct OTP is returned, access is granted. http://www.mideye.com/index.php3?bredd=268.5 It should be simple to generate a one time password, throw it into a database,send it via sms and make it available for the next time, the user requests access. The problem here seems to be, that after a first successfull authentication another one with only a new password but the already entered username has to be done. Can this be realised with an actual freeradius? If so: Where can I find documentation about it? Norbert Wegener

3 6

limiting user access by day
by Budiono U. 03 Mar '08

03 Mar '08

Hi all, I'm currently setup freeradius server for hotspot, but right now I have some problem for limiting access user to particular day. As example : user1 accessing on Monday to Friday and user2 only accesing on Saturday or Sunday. And each user is limiting for one day access only, and after that day he/she can't login again. Is there any module or attribute to setup radius for this system. Any help would be appreciated. Thank you Budiono

4 3

NAS-Group? - different replies to different NASes?
by Adrian 01 Mar '08

01 Mar '08

Hello Everyone, I need help setting up custom replies for each NAS in my organization. I.E I have NAS A and NAS B When NAS A communicates with our Radius Server (Freeradius) I want to send back Tunnel attributes on domain matching. (i.e *(a)domain.com - a set of tunnel attributes Service-Type, Tunnel-Password, Tunnel-Type...etc - not user specific). When NAS B communicates with our Radius I want to send back specific information about the user it's requesting (i.e user(a)domain.com - Framed-IP, Framed-Netmask...etc) Since both requests are addressed to domain.com how can I selectively allow only certain responses to NAS A and others to NAS B? Thanks for the help Adrian Boros

5 23

freeradius 1 mysql Attribute
by Dustin Schuemann 29 Feb '08

29 Feb '08

Im working with dialup provider that is acting as the nas and they are authenticating off my radius server. Authentication works fine. They have this fastnet program that is supposed to make the internet faster. Attached is what they told me to do. I have added it to the dynamic group in mysql and the user is part of that group. But nothing. If you run your own radius server: For those of you that run your own radius server, you must configure your radius server to authenticate the enduser. The authentication will be passed to you, via the same radius servers that authentication currently comes from for pass through radius. The customer must login to the software using their dial-up username and password. You will need to pass back to us the following attribute. (You will need to add this to your dictionary file): VENDORATTR 7000 Slipstream-Auth 1 string Set this equal to 'true' for those that have web acceleration and 'false' for those that do not. By default right now it accepts all users, so be sure to test it with setting one user equal to false and trying to login, it should deny them. Example of how this can be done (using Radiator): Add to your dictionary file at /usr/local/etc/raddb/dictionary: VENDORATTR 7000 Slipstream-Auth 1 string Next, In Radiator you will want to configure like we have listed below. The default entry should be listed after all the webcompress users but before all normal users. Example of how this can be done (Most Radius's): Open up your current dictionary file. Search for the word : cisco- avpair . This is attribute # 1 of vendor 9. You need to create a similar entry, but it should be attribute # 1 of vendor 7000. Follow the example of how the other entry is in your dictionary file. If you cannot find this attribute, it could be under a sub dictionary file. Perhaps something called dictionary.cisco . You may have some INCLUDE lines at the top of your dictionary file that call include dictionary.cisco. If so, you will want to add an INCLUDE line for something like dictionary.slipstream and then follow the example on how dictionary.cisco is setup to make your own dictionary.slipstream file and add that one attribute in it. To Accept a user (this will accept dial-up and accept slipstream): test@realm Auth-Type := Local, User-Password == "trial" Slipstream-Auth = "true" To Deny a user from Slipstream. Do not pass back the Slipstream-Auth = "true". We deny all customers that do not hae a Slipstream-Auth = "true" attribute. Dustin Schuemann . Network Engineer . . . . . . . . . . . . . . . . . . . . . . . . . . AMS/The Support Dept 400 Ann St NW Suite 102 Grand Rapids, MI 49504 p. 616.235.0725 ext. 7007 e. schuemann(a)supportdept.com

3 9

Re: header enrichment
by mauro 29 Feb '08

29 Feb '08

thanks , this can really helps my. So you suggest to investigate about supported RADIUS attributes admitelly I'm not ARADIUS expert and I don't know what VSA means. but I think we can procede togheter, also if we could find a way to introduce Freeradius into the Mobile Network. if you think we are OT please feel free to contact me privately to not disturb the list thanks very much >If there is a RADIUS attribute/VSA that can be interpreted by the >RADIUS client as containing the information required to enrich your >headers, and the client then does the right thing with the Value of >that AV pair, then yes, it can be done. If the RADIUS client cannot >take the information from a specific AVP, then no it cannot be done >without development work by your client vendor (nothing the server can >do to force it). Hope that helps, ___________________________________ L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html

3 2

authentication winxp over LAN throw switch cisco3560 not working
by hamid benane 29 Feb '08

29 Feb '08

hello everybody, i try many time to resolve this pb but i dont found the solution. my configuration is: freeradius-1.1.1 on fedora6+ nas switch cisco3560+ and wind xp client. On wireless, my configuration work, when i use NAS AP of cisco1200. But when i use my configuration to authenticate xp on lan network only: its not work. i saw on debug -X -A, that freeradius receive ACCES_REQUEST but when he send ACCES_CHALLENGE he cannot. on trame analysis on freerdaius, i saw that he cannot send on the port that the switch tel him to send. i m blocked on this step, and i cannot found the solution. on my configuration, i use users: "users" "password" only i havent active directory. on my switch, i dont make vlan. can some one help me. thanks for all _________________________________________________________________ Découvrez de nouvelles façons de rester en contact grâce à Windows Live! Visitez la Cité @ Live dès aujourd’hui! http://www.tonadresselive.ca/?icid=LIVEIDFRCA006

2 2

Response packets with attributes
by David Clairns 29 Feb '08

29 Feb '08

greetings, i am very close to my deadline and stil can't figure out how to retrieve some user specific informations from freeRadius. for example: how to construct a request packet to freeRadius that would respond me with a packet in which would be user status (active, expired, disabled, online)? i really searched through tons of references but couldnt find anything remotely close, thank you for your support, David ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

freeRADIUS+samba3.0.1+AD(multiple domains)
by Hangjun He 29 Feb '08

29 Feb '08

Hi, We are using freeRADIUS 1.1.6. and samba 3.0.1 talk to active-directory. Followed by: http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWTO Now it can work. But there are multiple domains in active-directory. How to configure freeRADIUS or samba can let it support multiple domains? Thanks. John --------------------------------- 雅虎邮箱传递新年祝福，个性贺卡送亲朋！

3 3

freeradius SQL + EAP + Windows client
by Guillaume Chartrand 28 Feb '08

28 Feb '08

Hi, I've got some problem when I try to Authorize with SQL and a windows client to Wireless connection. I configure my windowx xp wireless connection to works with PEAP. My freeradius version is 2.0.0 running on RHEL4 AS When I make a test with the command Radtest guillaume passtest localhost 1645 testing123 I've have this result rad_recv: Access-Request packet from host 127.0.0.1 port 34468, id=204, length=61 User-Name = "guillaume" User-Password = "passtest" NAS-IP-Address = 127.0.0.1 NAS-Port = 1645 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 4 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated rad_check_password: Found Auth-Type auth: type "PAP" +- entering group PAP rlm_pap: login attempt with password "passtest" rlm_pap: Using clear text password "passtest" rlm_pap: User authenticated successfully ++[pap] returns ok Sending Access-Accept of id 204 to 127.0.0.1 port 34468 Finished request 0. So authorize with SQL working for now but it's when I try to connect with the same parameter with my windows client I've got a access-reject and I don't know why. Here's my log when I try to connect. It's a very long log but I prefer to put more than less rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=0, length=207 Message-Authenticator = 0xc0f8d00a3b3681c80b0404fb1071f81a Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000e016775696c6c61756d65 NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 4 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok rlm_eap: EAP packet type response id 0 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 172.20.50.202 port 1063 EAP-Message = 0x01010016041092804dde8d0a06d99e5261ceb9722ac7 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced520d38a3a459d69bfb6e15b4 Finished request 0. Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=1, length=217 Message-Authenticator = 0x9c0bc150cd03185ca99cfd2e204c58d7 Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced520d38a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020100060319 NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 3 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok rlm_eap: EAP packet type response id 1 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: EAP-NAK asked for EAP-Type/peap rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 172.20.50.202 port 1063 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced530e25a3a459d69bfb6e15b4 Finished request 1. Going to the next request Waking up in 0.8 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=2, length=291 Message-Authenticator = 0x67008b1dd66cde4ee9ecd8b2b31c8d8c Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced530e25a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202005019800000004616030100410100003d030147c6ffb92935badbb2f4def8539d5a52639b98a4363eec5b7ef740726e82e7c600001600040005000a000900640062000300060013001200630100 NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 2 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok rlm_eap: EAP packet type response id 2 length 80 rlm_eap: Continuing tunnel setup. ++[eap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 70 rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0758], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 172.20.50.202 port 1063 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x06242ce2a82441b626d21ae76b774d4fb1452a8879d0308f7b7ceb863728c892df20626b3c9b690c0dcfcf6ad3b2a7b238408c380ab0c7350f9b53cff7a2d8d9fc5d3c06429efe11fe985e169bbe26e5bdcf0bc82defec1ec1bdaeb2ef5d81ff5121beb0056852f050c316517aa687b2eba144f18d9eccbab9584c610078d7953572f32599359196437af21cb73e70314a6e6dceb7062ed3ea1ef35413e2f3d8d38cee20d756bb51adea8cd556706cbfcbe96acc8b4eddcc44a144092e865eb9354a21da4729f0f295e494c8f74f7584619dd667080dfd04119753cbbca8e02f30710203010001a317301530130603551d25040c300a06082b06010505 EAP-Message = 0x070301300d06092a864886f70d0101040500038201010056ade8e3773dd290a848cdbfad5c1a59b2f35473597493243ceb820892754b92868e742b44030f7068a5d825931c8721b0976d23c21283548b8549a357907fe7b6076a36852d51fd3b6b862d4852055b58b2f1c133ae6e2af7868fb394a806f076675b18d3e2919dca32e7a3101364f25b48c0a4ab5a7c207a60175dee981c5bc15ecec9e544d74fc7d9999cc6ea5d42fd994734698b9e6a502d6d6c8785091b9494f5771e5391283e05f05f91c65ad034ee22f0384b7a676bbc962cd656236970fa309ba4ce2ed667eb57b8012032d8d57a27a00681ef80c7552c1cdeb91cf5f07534cef0a1 EAP-Message = 0x4ef83b331774e71485811454 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced500f25a3a459d69bfb6e15b4 Finished request 2. Going to the next request Waking up in 0.8 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=3, length=217 Message-Authenticator = 0xba417f3e033cd9fcf8c4c2e53f416738 Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced500f25a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300061900 NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 1 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 1 ++[sql] returns ok rlm_eap: EAP packet type response id 3 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 172.20.50.202 port 1063 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x71e3add200d77b9bd2e1c132a12a64342f319d54fa023e29fefe206b380fe3817e9390edca3ca4eebd64b539e53178b502897f08da96010c79a3ddc8624cda44c46e858f81975ba8d58d334519bee708117517cf9bdb0803289a13f568b60fbe3389ee6f0aad043510311730d6232c05d5781292590e2dd0c269461254122f461843eb17837a64fda6ffc7ba2c41a6c080d6660c1b7db277025167df8ad183b4dbce207cafdecdbf147208cee0d4214f8eecf0c0bb892c36ecdd5ae04f0feb0a5505030a9c16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced510825a3a459d69bfb6e15b4 Finished request 3. Going to the next request Waking up in 0.7 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=4, length=533 Message-Authenticator = 0xe640831a6cc1058b837e7b6545553c8c Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced510825a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 0x19aaf6afac987e2b53eacf2d5b558e1aad52e4c560f33fcc1403010001011603010020c30bee50878b3e356c158179fc51845d809915f2fbbf73dd7241b9a16a005793 NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 0 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok rlm_eap: EAP packet type response id 4 length 253 rlm_eap: Continuing tunnel setup. ++[eap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 310 rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 172.20.50.202 port 1063 EAP-Message = 0x01050031190014030100010116030100208bb299fbb9a8ecc9529ec3acf8080b4fbee9264638e3344eeed742f31342fac0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced560925a3a459d69bfb6e15b4 Finished request 4. Going to the next request Waking up in 0.6 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=5, length=217 Message-Authenticator = 0x220b76bfe2d6dbe7846eb66729e647a3 Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced560925a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020500061900 NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 4 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok rlm_eap: EAP packet type response id 5 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 5 to 172.20.50.202 port 1063 EAP-Message = 0x0106002019001703010015b5d9ed38c16abe949007856112163c349f47653a9a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced570a25a3a459d69bfb6e15b4 Finished request 5. Going to the next request Waking up in 0.6 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=6, length=248 Message-Authenticator = 0x6915c4ca0dac6f36bcbb06a505b09b13 Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced570a25a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020600251900170301001a6e27e83a583513f96734491893052bc45e331dea5a817514c96d NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 3 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok rlm_eap: EAP packet type response id 6 length 37 rlm_eap: Continuing tunnel setup. ++[eap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - guillaume PEAP: Got tunneled identity of guillaume PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to guillaume +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 2 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok rlm_eap: EAP packet type response id 6 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled PEAP: Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 6 to 172.20.50.202 port 1063 EAP-Message = 0x0107003a1900170301002fecaf21a73ddbad75e42aa30dc5d0d2489a475ea8b653ef48600c15b788c513f3653ff92d6399cb21abb210cbc9374e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced540b25a3a459d69bfb6e15b4 Finished request 6. Going to the next request Waking up in 0.5 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=7, length=302 Message-Authenticator = 0x7287204fcda0fbdaa0909c61c390db5d Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced540b25a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0207005b190017030100501535a8ff853e55baa970b95035da4cc5ed023c4fc2bff19dacdb32c539c6fb422a96edb8dd7cf0b34268b75d80b0b850d575c6894afafca7e0be7250dddd00044bdd0fe6176b0b6afd5e670b2567f46c NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 1 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 1 ++[sql] returns ok rlm_eap: EAP packet type response id 7 length 91 rlm_eap: Continuing tunnel setup. ++[eap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 PEAP: Setting User-Name to guillaume +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 0 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok rlm_eap: EAP packet type response id 7 length 68 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 +- entering group MS-CHAP rlm_mschap: Told to do MS-CHAPv2 for guillaume with NT-Password expand: --username=%{mschap:User-Name:-None} -> --username=guillaume rlm_mschap: No NT-Domain was found in the User-Name. expand: --domain=%{mschap:NT-Domain:-intranet} -> --domain=intranet mschap2: c4 expand: --challenge=%{mschap:Challenge:-00} -> --challenge=4384da4f07ddf5b1 expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=b4e365eb0f01c659d845bd177f80139ebbe46ada409725f1 Exec-Program output: Logon failure (0xc000006d) Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Exec-Program: returned: 1 rlm_mschap: External script failed. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject rlm_eap: Freeing handler ++[eap] returns reject auth: Failed to validate the user. PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE ++[eap] returns handled Sending Access-Challenge of id 7 to 172.20.50.202 port 1063 EAP-Message = 0x010800261900170301001b43e26227f37525d5072bc3647428c3fafce33dd5f49b549f0194e0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x520c3ced550425a3a459d69bfb6e15b4 Finished request 7. Going to the next request Waking up in 0.4 seconds. rad_recv: Access-Request packet from host 172.20.50.202 port 1063, id=8, length=249 Message-Authenticator = 0x7c5457d18a2ab93316e3cb7416ec9acb Service-Type = Framed-User User-Name = "guillaume\000" Framed-MTU = 1488 State = 0x520c3ced550425a3a459d69bfb6e15b4 Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume" Calling-Station-Id = "00-0E-35-99-F3-E9" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020800261900170301001b3116a7abe82507e5348d4e6f2e108f5b1c80d2e51db813beebcc1f NAS-IP-Address = 172.20.50.202 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "guillaume", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> guillaume rlm_sql (sql): sql_set_user escaped user --> 'guillaume' rlm_sql (sql): Reserving sql socket id: 4 expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok rlm_eap: EAP packet type response id 8 length 38 rlm_eap: Continuing tunnel setup. ++[eap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Had sent TLV failure. User was rejected earlier in this session. rlm_eap: Handler failed in EAP/peap rlm_eap: Failed in EAP select ++[eap] returns invalid auth: Failed to validate the user. Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> guillaume attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.4 seconds. Waking up in 0.1 seconds. Waking up in 0.1 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 8 to 172.20.50.202 port 1063 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.4 seconds. Cleaning up request 0 ID 0 with timestamp +14 Waking up in 0.1 seconds. Cleaning up request 1 ID 1 with timestamp +14 Cleaning up request 2 ID 2 with timestamp +14 Cleaning up request 3 ID 3 with timestamp +15 Cleaning up request 4 ID 4 with timestamp +15 Cleaning up request 5 ID 5 with timestamp +15 Cleaning up request 6 ID 6 with timestamp +15 Waking up in 0.1 seconds. Cleaning up request 7 ID 7 with timestamp +15 Waking up in 1.0 seconds. Cleaning up request 8 ID 8 with timestamp +15 Ready to process requests. Thanks for the help ---------------------------- Guillaume Chartrand Technicien informatique Cégep régional de Lanaudière Centre administratif, Repentigny (450) 470-0911 poste 7218

2 1

Re: Consuming card code
by Juraj Bilic 28 Feb '08

28 Feb '08

Ive found the answer to my dilemma. With radiusmanager3 i set available online time to 1h and with acct packet subtract seconds from available online time. The main solution lies in two attributes: Acct-Status-Type = Interim-Update and Acct-Session-Time = <seconds>. thanks for all the support by repliers ;) ----- Original Message ---- From: Juraj Bilic <asipu_zu(a)yahoo.com> To: freeradius-users(a)lists.freeradius.org Sent: Wednesday, February 27, 2008 6:50:12 PM Subject: Consuming card code Im using freeradius-1.1.7 on my remote unix machine and developing on my client .net application. By now i succesfully made authorization and start/stop accounting request/responses (packet send/recieve logic). With radiusManager3 i generated card series, services .. Can i implement user login, consuming of card codes, etc. with only packets (acct) or im missing some crucial points? I hope that i (user, client) can make an behaviour of communicating with freeradius every 10sec and consuming 10sec of currently selected card code. thank you for your time, Juraj ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

1 0