May 2008 - Freeradius-Users - lists.freeradius.org

help freeradius pam
by Angel Camacho Villan 30 May '08

30 May '08

hello, i try to config pam for works with freeradius somebody can helpme to config the file /etc/pam.d/login /etc/pam.d/gdm thanks.. atte Angel

1 0

Re: Fw: Invalid user (rlm_ldap: Access Attribute denies access) -Digest Authentication With FreeRADIUS and OpenLDAP
by Hoa But 29 May '08

29 May '08

Hello Ivan, Thanks for the tip. I thought no dialupAccess attribute does not matter since I am not on remote. I am on a lan connection. Okay, I will configure that now and see what happens. Thanks, Hoa -----Original Message----- >From: Ivan Kalik <tnt(a)kalik.net> >Sent: May 29, 2008 3:08 PM >To: freeradius-users(a)lists.freeradius.org >Subject: Re: Fw: Invalid user (rlm_ldap: Access Attribute denies access) -Digest Authentication With FreeRADIUS and OpenLDAP > >>> >>>I am getting "Invalid user (rlm_ldap: Access Attribute denies access)" > >And a bit earlier in the debug you have: > >>>rlm_ldap: no dialupAccess attribute - access denied by default > >Ivan Kalik >Kalik Informatika ISP > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

rlm_checkval module
by Yeargan Yancey 29 May '08

29 May '08

Version: FreeRADIUS 2.0.4 I read the configuration file comments, searched the forums, and even read the source code for rlm_checkval, but am still having trouble getting it working the way I think it should. I am somewhat new to this, so perhaps I missed something obvious. I have an LDAP database. I do have LDAP authentication working without checkval. In the LDAP database, we have an attribute named 'host' that is meant to be a list of NAS IP addresses. This attribute is of type string and multi-valued. A sample LDAP entry might look something like this: dn: uid=testuser,ou=people,o=company host: 192.168.0.1 host: 192.168.0.2 host: 192.168.0.3 I added this to the ldap.attrmap file: checkItem NAS-IP-Address host and then added this to the radiusd.conf file: checkval hostaccess { item-name = NAS-IP-Address check-name = NAS-IP-Address data-type = string notfound-reject = yes } and then added 'hostaccess' after 'ldap' in the authorize section of sites-available/default file. When I perform a test (like this): radtest testuser testpass localhost 10 testing123 I get the following 'radiusd -X' output: [...] Listening on authentication address * port 1812 Listening on accounting address * port 1813 User-Name = "testuser" User-Password = "testpass" NAS-IP-Address = 192.168.0.1 NAS-Port = 10 [...] rlm_ldap: Bind was successful rlm_ldap: performing search in ou=people,o=unt, with filter (uid=testuser) rlm_ldap: looking for check items in directory... rlm_ldap: LDAP attribute host as RADIUS attribute NAS-IP-Address == 192.168.0.1 rlm_ldap: looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? rlm_ldap: Setting Auth-Type = ldap rlm_ldap: user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok rlm_checkval: Item Name: NAS-IP-Address, Value: ???? rlm_checkval: Value Name: NAS-IP-Address, Value: 192.168.0.1 rlm_checkval: Value Name: NAS-IP-Address, Value: 192.168.0.2 rlm_checkval: Value Name: NAS-IP-Address, Value: 192.168.0.3 ++[hostaccess] returns reject Invalid user (rlm_checkval: This NAS-IP-Address is not allowed for the user): [testuser/testpass] (from client localhost port 10) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> testuser attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 2 seconds [...] The "Item Name: NAS-IP-Address, Value: ????" bothered me a bit. I don't understand what that means. I think that should show the value from the Access-Request message, but "????" did not make any sense. There is a value present in the request, otherwise it would reject for a missing VP. The value is clearly there. Now I tried changing to 'data-type = ipaddr' in the checkval configuration, but that seems to be ignored in the source code. The source code seems to compare only string, octet, date, and integer and ignores other types simply returning noop. How should I correctly check that the NAS-IP-Address is listed in the LDAP database's 'host' attribute? Respectfully, Yancey

4 3

Re: mod_auth_radius bus errors
by Rick 29 May '08

29 May '08

Rick wrote: > > I'm attempting to use mod_auth_radius (the cvs string is out-of-date, > > but it's the latest from freeradius.org for Apache 1.3), > > Latest from CVS? Or...? Actually, from http://www.freeradius.org/mod_auth_radius/mod_auth_radius.c Building it from cvs works - thanks! > > to > > authenticate to a Safeword RADIUS server, but when I authenticate, > > Apache bus errors - on auth failure, however, it doesn't. There's > > nothing useful logged, and no core file, basically, the server thinks > > I've authenticated, and Apache logs: > > There were issues with older versions of the module. The code in CVS > should have this fixed. We need to issue a new version of the module > which contains the fixes.

1 0

Assign Ip-Pool based on NAS-Ip-Address
by Giovanni Lovato 29 May '08

29 May '08

I would like to assign IP addresses from pools based on which NAS the request comes from. Can I achieve this? Users are stored in LDAP and NAS on SQL.

5 7

FreeRadius trims value of the Cisco-AVPair attribute
by Evgeney Bakhtin 29 May '08

29 May '08

If I execute a query: SELECT id AS AttrID, 'zhekha2' AS Login, attr AS AttrName, IPPhone.VoIP_GetAttrib('zhekha2','','',attr,'1','') AS AttrValue,':=' AS Oper FROM IPPhone.Attrib WHERE op IS NULL AND service=1 I have: # AttrID Login AttrName AttrValue Oper 1 3 zhekha Session-Timeout 0 := 2 4 zhekha h323-credit-time 0 := 3 5 zhekha h323-billing-model 0 := 4 7 zhekha Cisco-AVPair h323-ivr-in=terminal-alias:zhekha,0921877; := 5 9 zhekha XPGK_XROUTING_ROUTING := But in freeradius log I have: Sending Access-Accept of id 149 to 89.251.105.114 port 48099 Session-Timeout := "0" h323-credit-time := "0" h323-billing-model := "0" Cisco-AVPair := "h323" Finished request 10. What I do wrong?

4 5

EAP-TTLS w/PAP using ntlm_auth
by Bram Matthys (Syzop) 29 May '08

29 May '08

While I've EAP-TTLS w/EAP-MSCHAPv2 working now with ntlm_auth, I'd also like to have EAP-TTLS w/PAP working with ntlm_auth (mostly because the client software I use [securew2] does not save user credentials with mschap, and does save them with pap. And just to offer more options to other clients). Anyway, I tried to do it using these suggestions (after previously my own attempt failed): http://lists.cistron.nl/pipermail/freeradius-users/2008-March/070469.html in radiusd.conf: exec ntlm_auth_pap { wait = yes input_pairs = request shell_escape = yes output = none program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYNET --username=%{User-Name} --password=%{User-Password}" } then in sites-enabled/inner-tunnel: authenticate { Auth-Type PAP { ntlm_auth_pap } Actually I did the same in sites-enabled/default as well to see if it helps (didn't matter, of course). Just, for the record, pap is also in the authorize { } section, listed at the end in that block, as recommended. But.. no luck.. it seems the ntlm_auth stuff is not being called at all, and to be honest I'm not even sure if pap is picking things up. I always end up with this: Wed May 28 15:16:08 2008 : Debug: modsingle[authorize]: calling pap (rlm_pap) for request 5 Wed May 28 15:16:08 2008 : Debug: modsingle[authorize]: returned from pap (rlm_pap) for request 5 Wed May 28 15:16:08 2008 : Debug: ++[pap] returns noop Wed May 28 15:16:08 2008 : Debug: auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Wed May 28 15:16:08 2008 : Debug: auth: Failed to validate the user. Wed May 28 15:16:08 2008 : Auth: Login incorrect: [MYNET\\myuser/xxx] (from client localhost port 0 cli 02-00-00-00-00-01 via TLS tunnel) I used this wpa supplicant config for testing with eapol_test: network={ ssid="mynet-test" key_mgmt=WPA-EAP eap=TTLS pairwise=CCMP TKIP group=CCMP TKIP WEP104 WEP40 phase2="auth=PAP" identity="MYNET\myuser" password="xxx" anonymous_identity="anonymous@identity" } I first tried a different aproach, like putting ntlm_auth_pap in the authorize { } section before pap, and then radius *is* calling ntlm_auth, but then it just goes on and complains about not known the Auth-Type. Debug: modsingle[authorize]: calling ntlm_auth_pap (rlm_exec) for request 5 Debug: expand: --username=%{User-Name} -> --username=MYNET\myuser Debug: expand: --password=%{User-Password} -> --password=xxx Debug: Exec-Program output: NT_STATUS_OK: Success (0x0) Debug: Exec-Program-Wait: plaintext: NT_STATUS_OK: Success (0x0) Debug: Exec-Program: returned: 0 Debug: modsingle[authorize]: returned from ntlm_auth_pap (rlm_exec) for request 5 Debug: ++[ntlm_auth_pap] returns ok Debug: modsingle[authorize]: calling pap (rlm_pap) for request 5 Debug: modsingle[authorize]: returned from pap (rlm_pap) for request 5 Debug: ++[pap] returns noop I've reverted that attempt before trying everything I mentioned earlier, though. Regards, Bram.

3 9

mod_auth_radius bus errors
by Rick 29 May '08

29 May '08

Hi all, I'm attempting to use mod_auth_radius (the cvs string is out-of-date, but it's the latest from freeradius.org for Apache 1.3), to authenticate to a Safeword RADIUS server, but when I authenticate, Apache bus errors - on auth failure, however, it doesn't. There's nothing useful logged, and no core file, basically, the server thinks I've authenticated, and Apache logs: [Date time] [notice] child pid 9819 exit signal Bus Error (10) And the web page I'm trying to access is never displayed (Unable to display web page error.) This is on a Solaris 10 / SPARC box - wondering if there may be some network byte-ordering issue? Anyway, if anyone has seen this before, and know what I'm doing wrong, would appreciate any assistance. Best regards, Rick

2 1

Freeradius 2.0.4 + OpenLDAP Problem (Cleartext-Password)
by German Hernandez 29 May '08

29 May '08

Hello everybody!! I have FreeRADIUS 1.1.7 + openldap using EAP-PEAP authentication, perfectly working. Now, I want to use the same openldap database, but with FreeRADIUS 2.0.4, but I can't get success authentication. is it necesary additional parameters of configuration for Freeradius 2.0.4? How or Where can I configure User-Password instead Cleartext-Password? OpenLDAP database needs changes for FreeRADIUS 2.0.4? ----------------------- Similar error I got, when I configured EAP-PEAP without OpenLDAP database(Using users file), like in FreeRADIUS 1.1.7: "temporal1" User-Password == "temporal1" But, when I changed User-Password with Cleartext-Password: "temporal1" Cleartext-Password := "temporal1" I got success authentication. ----------------------- But,I need to continue using my OpenLDAP database, somebody can help me how to achieve that? Thanks in advance! German --------------------------------- Yahoo! Deportes Beta ¡No te pierdas lo último sobre el torneo clausura 2008! Entérate aquí http://deportes.yahoo.com User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202000e0174656d706f72616c31 Message-Authenticator = 0x55f6f02dad97274f983156eb619450fb +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 2 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound rlm_ldap: Entering ldap_groupcmp() expand: ou=users,ou=radius,dc=wireless,dc=mired,dc=mx -> ou=users,ou=radius,dc=wireless,dc=mired,dc=mx WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=temporal1) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 192.168.1.2:389, authentication 0 rlm_ldap: bind as uid=riu,ou=admin mail,dc=server,dc=mired,dc=mx/mypass to 192.168.1.2:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (uid=temporal1) rlm_ldap: ldap_release_conn: Release Id: 0 expand: (|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (&(cn=academicos)(|(&(objectClass=GroupOfNames)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=RETY750916,ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (objectclass=*) rlm_ldap::ldap_groupcmp: User found in group academicos rlm_ldap: ldap_release_conn: Release Id: 0 users: Matched entry DEFAULT at line 139 ++[files] returns ok rlm_ldap: - authorize rlm_ldap: performing user authorization for temporal1 WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=temporal1) expand: ou=users,ou=radius,dc=wireless,dc=mired,dc=mx -> ou=users,ou=radius,dc=wireless,dc=mired,dc=mx rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (uid=temporal1) rlm_ldap: Added User-Password = TEMPORAL1 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user temporal1 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 ++[eap] returns handled EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a73dd5c9876db8a2af8cd70725 Finished request 0. Going to the next request Waking up in 4.9 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a73dd5c9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0203005019800000004616030100410100003d0301483350f485457ef321d7205f1d3f11970f19adf7ebc2d32dd5fe9d61348b073d00001600040005000a000900640062000300060013001200630100 Message-Authenticator = 0xcdc119224a6d29ca585372b3f0012c87 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 3 length 80 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 70 rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 085e], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa0750995694ed4b3130eea99 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a73cd2c9876db8a2af8cd70725 Finished request 1. Going to the next request Waking up in 4.9 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a73cd2c9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020400061900 Message-Authenticator = 0xcc57a33616442858d1ff03ff4d392bf8 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 4 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x9e5ee30aa059fc32 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a73fd3c9876db8a2af8cd70725 Finished request 2. Going to the next request Waking up in 4.9 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a73fd3c9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020500061900 Message-Authenticator = 0x19e5d2c0dd47034a67366569932803d9 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 5 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled EAP-Message = 0x010600d51900fa20504c21743fdcb28c94527095e4bf87f8c9ebbba34400532e82551128434a2a68843619bcbe798630caaec366ec67991327067eb1777e1bcfc1cccc2fc0ec4b80943004ad7e80b9c4431ef84c990eac035d5f9c74b8555739fec5b1bc985fcd95769e31c854d7d61c2d82d97bdb776a153262f818e15c330b59d6e6c2d44cd2d73ee0fff9c4613d98f474a8555b2921f28181c03f803b8dcf740b18a1c13041a95bb3820bea7dfecffc8145308c5e95d161b51a33645bcaceafcb383c3ce03546e7b657bd16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a73ed0c9876db8a2af8cd70725 Finished request 3. Going to the next request Waking up in 4.8 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a73ed0c9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 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 EAP-Message = 0x3bfb40169caae4c580856ad2e941e127bff6a175b3c2a58114030100010116030100209df955e11155d458796366521047a8eaed81de51d31191e76245fc062c8e1b76 Message-Authenticator = 0x79a99d679c69ae0c9e1619f36db388ad +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 6 length 253 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 310 rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled EAP-Message = 0x0107003119001403010001011603010020f54bae3cd49c93d813734f616a8c3201ebc9c26416e88382fd46c88db64ddc8d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a739d1c9876db8a2af8cd70725 Finished request 4. Going to the next request Waking up in 4.8 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a739d1c9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020700061900 Message-Authenticator = 0xc88d46fc398be3abf214a9b1eb767756 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 7 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS ++[eap] returns handled EAP-Message = 0x01080020190017030100156ea40735a4cf89f4626ce63b4ce1cf092e6ad3eed1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a738dec9876db8a2af8cd70725 Finished request 5. Going to the next request Waking up in 4.8 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a738dec9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020800251900170301001a4436081b763f21812f4545f999ac3ca58d64fa44bd807dfa391d Message-Authenticator = 0xed2a31854da81f2c2607352f7038f884 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 8 length 37 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - temporal1 PEAP: Got tunneled identity of temporal1 PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to temporal1 +- entering group authorize ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop ++[control] returns noop rlm_eap: EAP packet type response id 8 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() expand: ou=users,ou=radius,dc=wireless,dc=mired,dc=mx -> ou=users,ou=radius,dc=wireless,dc=mired,dc=mx WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=temporal1) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (uid=temporal1) rlm_ldap: ldap_release_conn: Release Id: 0 expand: (|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (&(cn=academicos)(|(&(objectClass=GroupOfNames)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=RETY750916,ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (objectclass=*) rlm_ldap::ldap_groupcmp: User found in group academicos rlm_ldap: ldap_release_conn: Release Id: 0 users: Matched entry DEFAULT at line 139 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled PEAP: Got tunneled Access-Challenge ++[eap] returns handled EAP-Message = 0x0109003a1900170301002f176828ea998680bf5cbb0a089f240536fd49f7a9984d36023a331abdf4af139efdf8ed5afbadd7ec7b926a1c86d530 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a73bdfc9876db8a2af8cd70725 Finished request 6. Going to the next request Waking up in 4.8 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a73bdfc9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0209005b19001703010050056dc48b30e8cfce865753a81c19410868b44ccdc765162103a41cb362cbe3c0c3da3a0ba2e060f77d1914e2bbac6d1528650fa7b33eedd05d30623cd432cf9fb158e4ef5506d7fc6426b4adee4f5b4b Message-Authenticator = 0xc20c98af65ea96e29c26cc568c9b668e +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 9 length 91 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 PEAP: Setting User-Name to temporal1 +- entering group authorize ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop ++[control] returns noop rlm_eap: EAP packet type response id 9 length 68 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() expand: ou=users,ou=radius,dc=wireless,dc=mired,dc=mx -> ou=users,ou=radius,dc=wireless,dc=mired,dc=mx WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=temporal1) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (uid=temporal1) rlm_ldap: ldap_release_conn: Release Id: 0 expand: (|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (&(cn=academicos)(|(&(objectClass=GroupOfNames)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=RETY750916,ou=users,ou=radius,dc=wireless,dc=mired,dc=mx, with filter (objectclass=*) rlm_ldap::ldap_groupcmp: User found in group academicos rlm_ldap: ldap_release_conn: Release Id: 0 users: Matched entry DEFAULT at line 139 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 +- entering group MS-CHAP rlm_mschap: No Cleartext-Password configured. Cannot create LM-Password. rlm_mschap: No Cleartext-Password configured. Cannot create NT-Password. rlm_mschap: Told to do MS-CHAPv2 for temporal1 with NT-Password rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject rlm_eap: Freeing handler ++[eap] returns reject auth: Failed to validate the user. Login incorrect: [temporal1/<via Auth-Type = EAP>] (from client WLAN port 0 via TLS tunnel) PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE ++[eap] returns handled EAP-Message = 0x010a00261900170301001b1eb8a5f200d206368fbae80686e7042566c959114b2868fce2f0e0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3dd6d0a73adcc9876db8a2af8cd70725 Finished request 7. Going to the next request Waking up in 4.8 seconds. User-Name = "temporal1" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "00-20-a6-53-a6-a0:WLAN" Calling-Station-Id = "00-0e-9b-d3-72-7c" NAS-Identifier = "Avaya-AP-8-53-a6-a0" State = 0x3dd6d0a73adcc9876db8a2af8cd70725 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020a00261900170301001ba4d540bec66a46cd132819b8612d89fac136ed00afa7a8fd61e51e Message-Authenticator = 0x28a2d71520b5d7318fe1bcb6df931269 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "temporal1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 10 length 38 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Had sent TLV failure. User was rejected earlier in this session. rlm_eap: Handler failed in EAP/peap rlm_eap: Failed in EAP select ++[eap] returns invalid auth: Failed to validate the user. Login incorrect: [temporal1/<via Auth-Type = EAP>] (from client WLAN port 0 cli 00-0e-9b-d3-72-7c) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> temporal1 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. Cleaning up request 0 ID 232 with timestamp +39 Cleaning up request 1 ID 233 with timestamp +39 Cleaning up request 2 ID 234 with timestamp +39 Cleaning up request 3 ID 235 with timestamp +39 Waking up in 0.1 seconds. Cleaning up request 4 ID 236 with timestamp +39 Cleaning up request 5 ID 237 with timestamp +39 Cleaning up request 6 ID 238 with timestamp +39 Cleaning up request 7 ID 239 with timestamp +39 Waking up in 1.0 seconds. Cleaning up request 8 ID 240 with timestamp +39 Ready to process requests.

4 7

a newbie testing freeradius need help
by jreubens 29 May '08

29 May '08

Hi, I am newbie trying to test free radius for my master thesis, i installed free radius two days ago and did some initial testing, the initial test was through so the radius server is running properly, before i move on i wanted to test the eap modules, so i tried to test with the help of eapol_test tool that comes with the wpasupplicant, i cannot succeed i get failure message. i am really very new to linux and to free radius, can some one help me what i should do, because i can only move one further with my thesis if and only if i figure this out. Thank you for the help, really appreciate any kind of help or suggestion. Thanks once again, below are my conf files and screen output. HERE IS MY SCREEN OUTPUT FROM THE RADIUS SERVER Ready to process requests. User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200000e01616e6f6e796d6f7573 Message-Authenticator = 0x948a064fcafc2f8442938817c4f353d7 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "anonymous", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 0 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled EAP-Message = 0x010100160410a3803def371cc0ea374b74fd8923747b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x47545c0a47555820cf82ad36ba08594f Finished request 0. Going to the next request Waking up in 4.9 seconds. User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100060319 State = 0x47545c0a47555820cf82ad36ba08594f Message-Authenticator = 0x0d125e124530442dfbf043c5d6e55468 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "anonymous", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 1 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: NAK asked for unsupported type 25 rlm_eap: No common EAP types found. rlm_eap: Failed in EAP select ++[eap] returns invalid auth: Failed to validate the user. Login incorrect: [anonymous/<via Auth-Type = EAP>] (from client localhost port 0 cli 02-00-00-00-00-01) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> anonymous attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 0 ID 0 with timestamp +28 Waking up in 0.9 seconds. Cleaning up request 1 ID 1 with timestamp +28 Ready to process requests. User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200000e01616e6f6e796d6f7573 Message-Authenticator = 0xfbfadf8ca2d1f2729ac2cabcc17dee20 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "anonymous", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 0 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled EAP-Message = 0x010100160410fd28d3fff4edc58e80c666087e278736 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x383b40dc383a4460283057087d150429 Finished request 2. Going to the next request Waking up in 4.9 seconds. User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100060319 State = 0x383b40dc383a4460283057087d150429 Message-Authenticator = 0xc4d3cf883588c4ac6c34a66de5a82aa8 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "anonymous", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 1 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: NAK asked for unsupported type 25 rlm_eap: No common EAP types found. rlm_eap: Failed in EAP select ++[eap] returns invalid auth: Failed to validate the user. Login incorrect: [anonymous/<via Auth-Type = EAP>] (from client localhost port 0 cli 02-00-00-00-00-01) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> anonymous attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 3 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 3 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 2 ID 0 with timestamp +154 Waking up in 0.9 seconds. Cleaning up request 3 ID 1 with timestamp +154 Ready to process requests. HERE IS MY SCREEN OUTPUT FROM EAPOL_TEST TOOL Reading configuration file 'eapol_test.conf.peap' Line: 1 - start of a new network block eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 eapol_flags=0 (0x0) key_mgmt: 0x8 identity - hexdump_ascii(len=8): 74 65 73 74 75 73 65 72 testuser password - hexdump_ascii(len=8): 70 61 73 73 77 6f 72 64 password ca_cert - hexdump_ascii(len=33): 2f 75 73 72 2f 6c 6f 63 61 6c 2f 65 74 63 2f 72 /usr/local/etc/r 61 64 64 62 2f 63 65 72 74 73 2f 63 61 2e 70 65 addb/certs/ca.pe 6d m phase2 - hexdump_ascii(len=13): 61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2 anonymous_identity - hexdump_ascii(len=9): 61 6e 6f 6e 79 6d 6f 75 73 anonymous Priority group 0 id=0 ssid='' Authentication server 127.0.0.1:1812 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE Sending fake EAP-Request-Identity EAPOL: Received EAP-Packet frame EAPOL: SUPP_PAE entering state RESTART EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0 EAP: EAP entering state IDENTITY CTRL-EVENT-EAP-STARTED EAP authentication started EAP: EAP-Request Identity data - hexdump_ascii(len=0): EAP: using anonymous identity - hexdump_ascii(len=9): 61 6e 6f 6e 79 6d 6f 75 73 anonymous EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=14) TX EAP -> RADIUS - hexdump(len=14): 02 00 00 0e 01 61 6e 6f 6e 79 6d 6f 75 73 Encapsulating EAP message into a RADIUS packet Learned identity from EAP-Response-Identity - hexdump(len=9): 61 6e 6f 6e 79 6d 6f 75 73 Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=0 length=126 Attribute 1 (User-Name) length=11 Value: 'anonymous' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=16 Value: 02 00 00 0e 01 61 6e 6f 6e 79 6d 6f 75 73 Attribute 80 (Message-Authenticator) length=18 Value: fb fa df 8c a2 d1 f2 72 9a c2 ca bc c1 7d ee 20 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 80 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=0 length=80 Attribute 79 (EAP-Message) length=24 Value: 01 01 00 16 04 10 fd 28 d3 ff f4 ed c5 8e 80 c6 66 08 7e 27 87 36 Attribute 80 (Message-Authenticator) length=18 Value: 9c 1e f2 5d 0e 72 cd 49 88 c9 24 f5 2c bc ae 3a Attribute 24 (State) length=18 Value: 38 3b 40 dc 38 3a 44 60 28 30 57 08 7d 15 04 29 STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.00 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=1 len=22) from RADIUS server: EAP-Request-MD5 (4) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=1 method=4 vendor=0 vendorMethod=0 EAP: EAP entering state GET_METHOD EAP: configuration does not allow: vendor 0 method 4 EAP: vendor 0 method 4 not allowed EAP: Building EAP-Nak (requested type 4 vendor=0 method=0 not allowed) EAP: allowed methods - hexdump(len=1): 19 EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=6) TX EAP -> RADIUS - hexdump(len=6): 02 01 00 06 03 19 Encapsulating EAP message into a RADIUS packet Copied RADIUS State Attribute Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=1 length=136 Attribute 1 (User-Name) length=11 Value: 'anonymous' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=8 Value: 02 01 00 06 03 19 Attribute 24 (State) length=18 Value: 38 3b 40 dc 38 3a 44 60 28 30 57 08 7d 15 04 29 Attribute 80 (Message-Authenticator) length=18 Value: c4 d3 cf 88 35 88 c4 ac 6c 34 a6 6d e5 a8 2a a8 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 44 bytes from RADIUS server Received RADIUS message RADIUS message: code=3 (Access-Reject) identifier=1 length=44 Attribute 79 (EAP-Message) length=6 Value: 04 01 00 04 Attribute 80 (Message-Authenticator) length=18 Value: c2 b7 ec 8f d8 87 c9 c1 77 52 2d 40 8a 9e 9a a5 STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 1.00 sec RADIUS packet matching with station decapsulated EAP packet (code=4 id=1 len=4) from RADIUS server: EAP Failure EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Failure EAP: EAP entering state FAILURE CTRL-EVENT-EAP-FAILURE EAP authentication failed EAPOL: SUPP_PAE entering state HELD EAPOL: SUPP_BE entering state RECEIVE EAPOL: SUPP_BE entering state FAIL EAPOL: SUPP_BE entering state IDLE eapol_sm_cb: success=0 MPPE keys OK: 0 mismatch: 2 FAILURE root@ozzy3:/home/jreubens/wpa_supplicant-0.5.10# HERE IS MY EAPOL_TEST_PEAP CONF FILE root@ozzy3:/home/jreubens/wpa_supplicant-0.5.10# cat eapol_test.conf.peap network={ eap=PEAP eapol_flags=0 key_mgmt=IEEE8021X identity="testuser" password="password" ca_cert="/usr/local/etc/raddb/certs/ca.pem" phase2="auth=MSCHAPV2" anonymous_identity="anonymous" } HERE IS MY EAP.CONF FILE ON RADDB DIR eap { default_eap_type = md5 timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no md5 { } leap { } gtc { auth_type = PAP } tls { certdir = ${confdir}/certs cadir = ${confdir}/certs private_key_password = whatever private_key_file = ${certdir}/server.pem certificate_file = ${certdir}/server.pem CA_file = ${cadir}/ca.pem dh_file = ${certdir}/dh random_file = ${certdir}/random # fragment_size = 1024 # include_length = yes cipher_list = "DEFAULT" # make_cert_command = "${certdir}/bootstrap" } ttls { default_eap_type = md5 # allowed values: {no, yes} copy_request_to_tunnel = no # allowed values: {no, yes} use_tunneled_reply = no #virtual_server = "inner-tunnel" } peap { default_eap_type = mschapv2 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } mschapv2 { } } sorry to ask you some naive question, i am really new to this. and one more question whenever i change something in my eap.conf, users and client.conf file i kill the existing radiusd running and start a new radiusd, is that right or is there anyways to restart the radiusd. Thank you all and thank you for your time, Regards, Jreuben -- View this message in context: http://www.nabble.com/a-newbie-testing-freeradius-need-help-tp16833079p1683… Sent from the FreeRadius - User mailing list archive at Nabble.com.

5 16