July 2008 - Freeradius-Users - lists.freeradius.org

licensing question
by Steven Van Ingelgem 11 Jul '08

11 Jul '08

How does the GPL apply to the freeradius plugins? I want to create a freeradius plugin (completely my code), but does the GPL apply to it? I ask because dynamic linking is a very gray area in the GPL field. Thanks for your answer, Steven

3 4

general howto bandwidth control
by mike 11 Jul '08

11 Jul '08

hi folk, we have a little network with some cable modems. all modems use freeradius for authenticating and all useres use a pppoe session against freeradius to connect with the router. this works. now we want a bandwidth limitation for each modem. is this possible with freeradius? or how can we realize this in this enviroment (iptable rules are rejected from me...) ? my /etc/raddb/users looks like: DEFAULT Fall-Through = Yes #modem-client 000723023233 Auth-Type := Local, Cleartext-Password := "anonymous", NAS-Identifier == "000723023114" DS2-profile = 1 i searched for some documentation about this but nothing found. my guess is there is a options that can be inserted here, but where and how... thanks for any hints

3 4

detail records
by Roy Kartadinata 11 Jul '08

11 Jul '08

Hello all, We're using freeradius 2.0.5 in our test environment and noticed that our detail record doesn't have "Freeradius-Proxied-To" information like our current production radius which is still running an old version of freeradius. We currently setup the accounting record to be proxied to a remote radius server and running in debug mode showed that the accounting record was being sent to remote server but nothing in detail record. Is this something I have to specify on a config file? Cheers, Roy Kartadinata

3 6

Re: about EAP using 1.1.7 and 2.0.3
by Ryan Setiawan H 10 Jul '08

10 Jul '08

Alan wrote: > >hi, > > > >as Alan stated - your NAS doesnt seem to be getting > >the responses from your server. some ACL or routing issue? > >(stick a sniffer directly in front of the switch...if > >you need to, you may need to have a 'port mirror' or somesuch > >from the switch that feeds that switch if traffic is on a mgmt > >VLAN and .1q trunking is involved etc. > > > >dont worry about the errors from the ./configure - unless > >you are using any of those technologies (postgresql, oracle, > >TNC or IKEv2) - your server is 'normal' > > > >alan > > > > > >------------------------------ > Hi all, it's partially solve... I'm using a server as radius server and as vlan trunk that feed the switch tagged packet, also the server become gateway... after I using other server for radius, it work.... yeah the 1.1.7 radius is on other machine ( that's why it works )... so it's clear this not about freeradius version. thank alot all for your time Ryan Setiawan H -- DISCLAIMER: The contents of this email and attachments are confidential and may be subject to legal privilege. Any unauthorized use, copying, disclosure or communicating any part of it to others is strictly prohibited and may be unlawful. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately to the sender or notify us and delete the email and any attachments from your system. We cannot accept liability for loss or damage resulting from computer viruses. The integrity of email across the Internet cannot be guaranteed and PT BANK NISP, Tbk. will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to PT BANK NISP, Tbk.

1 0

EAP-TTLS / LDAP
by joris 09 Jul '08

09 Jul '08

Hello, After reading the configuration file radiusd.conf, it explicitly says that one can't use LDAP as the authentication backend when you use EAP (in my case, i'm interested in EAP-TTLS). Nonetheless, I can read elsewhere on the web that some people seem to use both EAP and LDAP, so I wonder who is right ? I would use LDAP for storing all my users/password and EAP to protect my users credentials over insecure Wifi. Any advices ? Cheers, Joris

4 4

POP3
by Slava 09 Jul '08

09 Jul '08

Hi, Could anyone tell me if there exists a solution to integrate FR with a POP3 server in order to provide Radius controlled access to mailboxes via POP3? I am currently using cucipop Thank you Slava Shkarupin Kiev, UA

3 3

Reply Attribute and Stripping a realm
by Sandra H. 09 Jul '08

09 Jul '08

I have a couple questions. I need to force a reply attribute for the slipstream service to all my customers. I'm using flatfile, just a basic setup. What would be the best way to do this? Also, How do I strip Realms? We get users coming to our RADIUS in this format username(a)realm.com My flatfile only has username due to the backend system we use. I need to strip the realm.. Thanks

2 1

Private key
by Kwok Sianbin 09 Jul '08

09 Jul '08

Hi, Need Help!! I had generated from the server CA.der, client.p12 and server.p12. CA.der installed in XP Prof and work fine but client.p12 got problem "Windows does not have enough information to verify this certificate". "You have a private key thas corresponds to this certificate". should I install server.p12 as well? Can anyone give me a hand to solve this.

3 4

sql_log inside virtual servers
by Leon Kyneur 09 Jul '08

09 Jul '08

Hi All, I'm trying to configure my virtual servers to have different sql_log queries and having some difficulty specifying the queries within the server { } block redefining sql_log { Start, Stop, Alive etc.. } parameters within each virtual server instance. Is this supported? Or can they only be set on a global basis? Oh and I'm using 2.0.5. Thanks Leon

2 2

Re: about EAP using 1.1.7 and 2.0.3
by Ryan Setiawan H 09 Jul '08

09 Jul '08

Ryan Setiawan H wrote: > > Use 2.0.5. Or, install raddb/sites-available/inner-tunnel from the > >source tree. > > > > Alan DeKok. > > > Hi Alan, Thanks for the reply, I've Update to freeradius 2.0.5, but still didn't show result, the debug still the same, here are the debug : rad_recv: Access-Request packet from host 192.168.12.130 port 1024, id=27, length=213 Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-0a-e4-13-b8-87" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" EAP-Message = 0x0261000c0174657374696e67 Message-Authenticator = 0xf267668d55a632d7f6ff3b2b94735eca +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 97 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound users: Matched entry testing at line 61 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 27 to 192.168.12.130 port 1024 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "101" EAP-Message = 0x016200160410706dc9d0aeae1c2c1fe2d41a5f8cc84a Message-Authenticator = 0x00000000000000000000000000000000 State = 0xba2a19f0ba481d03bf0d1926ffd8f60a Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.12.130 port 1024, id=27, length=213 Sending duplicate reply to client local port 1024 - ID: 27 Sending Access-Challenge of id 27 to 192.168.12.130 port 1024 Cleaning up request 0 ID 27 with timestamp +164 Ready to process requests. rad_recv: Access-Request packet from host 192.168.12.130 port 1024, id=27, length=213 Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-0a-e4-13-b8-87" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" EAP-Message = 0x0261000c0174657374696e67 Message-Authenticator = ------------------------------------------------------------------- I'm not sure it will help but i include the configure warning for 2.0.5 config.status: WARNING: ./Make.inc.in seems to ignore the --datarootdir setting config.status: WARNING: ./src/include/build-radpaths-h.in seems to ignore the --datarootdir setting chmod: check-radiusd-config: No such file or directory configure: WARNING: silently not building rlm_eap_ikev2. configure: WARNING: FAILURE: rlm_eap_ikev2 requires: libeap-ikev2 EAPIKEv2/connector.h. configure: WARNING: the TNCS library isn't found! configure: WARNING: silently not building rlm_eap_tnc. configure: WARNING: FAILURE: rlm_eap_tnc requires: -lTNCS. configure: WARNING: silently not building rlm_krb5. configure: WARNING: FAILURE: rlm_krb5 requires: krb5. configure: WARNING: silently not building rlm_sql_iodbc. configure: WARNING: FAILURE: rlm_sql_iodbc requires: libiodbc isql.h. configure: WARNING: silently not building rlm_sql_postgresql. configure: WARNING: FAILURE: rlm_sql_postgresql requires: libpq-fe.h libpq. configure: WARNING: oracle headers not found. Use --with-oracle-home-dir=<path>. configure: WARNING: silently not building rlm_sql_oracle. configure: WARNING: FAILURE: rlm_sql_oracle requires: oci.h. configure: WARNING: silently not building rlm_sql_unixodbc. configure: WARNING: FAILURE: rlm_sql_unixodbc requires: libodbc sql.h. --------------------------------------------------------------------- I'm using default configuration, just only change client.conf and users. there is clue, when I saw debug from 1.1.7 the second access request has different id but in this debug, it had same id ( that's is 27 ) maybe because client didn't receive challenge, it tried to retransmit I'm not expert at EAP but i think after challenge client should reply with different id... ( that is what I see at 1.1.7 ) Is there any configuration to be added ? Thank You Ryan Setiawan H -- DISCLAIMER: The contents of this email and attachments are confidential and may be subject to legal privilege. Any unauthorized use, copying, disclosure or communicating any part of it to others is strictly prohibited and may be unlawful. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately to the sender or notify us and delete the email and any attachments from your system. We cannot accept liability for loss or damage resulting from computer viruses. The integrity of email across the Internet cannot be guaranteed and PT BANK NISP, Tbk. will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to PT BANK NISP, Tbk.

3 2