August 2008 - Freeradius-Users - lists.freeradius.org

RE: � Official Update 2008!
by Microsoft XP 28 Aug '08

28 Aug '08

1 0

Re: PEAP mschapv2 using xp native supplicant
by Ryan Setiawan H 28 Aug '08

28 Aug '08

I've changed the lm and nt password using hash one, and now it works thanks Alan > And here we have it. Those are NOT valid lmPassword or ntPassword > fields. You are putting the clear-text password into those fields. The > clear-text password belongs in the "userPassword" field. > > Delete the lmPassword and ntPassword fields from the DB. They're wrong. > -- DISCLAIMER: The contents of this email and attachments are confidential and may be subject to legal privilege. Any unauthorized use, copying, disclosure or communicating any part of it to others is strictly prohibited and may be unlawful. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately to the sender or notify us and delete the email and any attachments from your system. We cannot accept liability for loss or damage resulting from computer viruses. The integrity of email across the Internet cannot be guaranteed and PT BANK NISP, Tbk. will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to PT BANK NISP, Tbk.

1 0

md5 passwords
by Alexandre J. Correa - Onda Internet 27 Aug '08

27 Aug '08

Hello, How i can auth users via radius.. using passwords crypt with md5 stored on db ? thanks ? -- Sds. Alexandre Jeronimo Correa Onda Internet - http://www.ondainternet.com.br OPinguim Hosting - http://www.opinguim.net Linux User ID #142329 UNOTEL S/A - http://www.unotel.com.br

3 2

certification problem
by Ahmet DÜLGAR 27 Aug '08

27 Aug '08

hi, finaly i could run radius with mysql,so thank everyone who helps me, but i have a new problem when i test connection with radtest or NTRadPing program it works fine , but in real world with a notebook on windows xp sp2 it gives an error about," windows cannot find correct certiface" or like this, my operation system in turkish so, i translate the error, what can i do for certicates, thanks for replies and helps _________________________________________________________________ Windows Live Spaces – hayatınız, Alanınız. Daha fazlasını öğrenmek için buraya tıklayın. http://get.live.com/spaces/overview

3 3

MSCHAP module returns OK, authentication fails..
by James Yale 27 Aug '08

27 Aug '08

(Hopefully I haven't double posted) Hi, Perhaps someone can help, I'm trying to setup FreeRADIUS as a cheaper/more flexible alternative to buying a Win2k3 Enterprise licence to do PEAP/MSCHAP for wireless clients but seem to be having a problem after the MSCHAP module is run. I'm using a MacOS as a test client, which connects to the wireless network, prompts about an invalid certificate chain for the SSL cert (suggesting that TLS is working) and then prompts for credentials. The credentials seem to get to radiusd okay, the identity is referenced in the debug logs and the authentication (via ntlm_auth) seems to work okay aswell, returning 0 and reporting success, however after this point everything seems to stop. The MacOS client reports that authentication has failed at this point. I've got debug logs for afew different configurations (changing odd MSCHAP module options) but haven't included them due to the size limit. Attached is: radius.log -> ntlm_auth with the domain hard configured via the config files. All of my tests produce the same result, with the MSCHAP module returning success and then (seemingly) nothing happening. I've also tested with eapol from wpa_supplicant, which produces the same effect. Any hints as to what I'm missing would be welcomed :) Thanks, James Yale jim(a)thebiggame.org

5 7

Integrating FreeRadius and Openldap: rlm_ldap not found error
by Syed Anwarul Hasan 27 Aug '08

27 Aug '08

I have done the following changes in the files below to test FreeRadius Server against a Openldap backend . * 1) /etc/raddb/modules/ldap* ldap { # # Note that this needs to match the name in the LDAP # server certificate, if you're using ldaps. *server = "127.0.0.1" identity = "cn=Administrator,dc=thales,dc=com" password = thales basedn = "dc=thales,dc=com" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)"* # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA" # profile_attribute = "radiusProfileDn" *access_attr = "dialupAccess"* # Mapping of RADIUS dictionary attributes to LDAP # directory attributes. *dictionary_mapping = ${confdir}/ldap.attrmap * *password_attribute = userPassword And also with no tls . 2) ldap.attrmap File with no changes. *# # Mapping of RADIUS dictionary attributes to LDAP directory attributes # to be used by LDAP authentication and authorization module (rlm_ldap) # # Format: # ItemType RADIUS-Attribute-Name ldapAttributeName [operator] # # Where: # ItemType = checkItem or replyItem # RADIUS-Attribute-Name = attribute name in RADIUS dictionary # ldapAttributeName = attribute name in LDAP schema # operator = optional, and may not be present. # If not present, defaults to "==" for checkItems, # and "=" for replyItems. # If present, the operator here should be one # of the same operators as defined in the "users"3 # file ("man users", or "man 5 users"). # If an operator is present in the value of the # LDAP entry (i.e. ":=foo"), then it over-rides # both the default, and any operator given here. # # If $GENERIC$ is specified as RADIUS-Attribute-Name, the line specifies # a LDAP attribute which can be used to store any RADIUS # attribute/value-pair in LDAP directory. # # You should edit this file to suit it to your needs. # checkItem $GENERIC$ radiusCheckItem replyItem $GENERIC$ radiusReplyItem checkItem Auth-Type radiusAuthType checkItem Simultaneous-Use radiusSimultaneousUse checkItem Called-Station-Id radiusCalledStationId checkItem Calling-Station-Id radiusCallingStationId checkItem LM-Password lmPassword checkItem NT-Password ntPassword checkItem LM-Password sambaLmPassword checkItem NT-Password sambaNtPassword checkItem SMB-Account-CTRL-TEXT acctFlags checkItem Expiration radiusExpiration checkItem NAS-IP-Address radiusNASIpAddress replyItem Service-Type radiusServiceType replyItem Framed-Protocol radiusFramedProtocol replyItem Framed-IP-Address radiusFramedIPAddress replyItem Framed-IP-Netmask radiusFramedIPNetmask replyItem Framed-Route radiusFramedRoute replyItem Framed-Routing radiusFramedRouting replyItem Filter-Id radiusFilterId replyItem Framed-MTU radiusFramedMTU replyItem Framed-Compression radiusFramedCompression replyItem Login-IP-Host radiusLoginIPHost replyItem Login-Service radiusLoginService replyItem Login-TCP-Port radiusLoginTCPPort replyItem Callback-Number radiusCallbackNumber replyItem Callback-Id radiusCallbackId replyItem Framed-IPX-Network radiusFramedIPXNetwork replyItem Class radiusClass replyItem Session-Timeout radiusSessionTimeout replyItem Idle-Timeout radiusIdleTimeout replyItem Termination-Action radiusTerminationAction replyItem Login-LAT-Service radiusLoginLATService replyItem Login-LAT-Node radiusLoginLATNode replyItem Login-LAT-Group radiusLoginLATGroup replyItem Framed-AppleTalk-Link radiusFramedAppleTalkLink replyItem Framed-AppleTalk-Network radiusFramedAppleTalkNetwork replyItem Framed-AppleTalk-Zone radiusFramedAppleTalkZone replyItem Port-Limit radiusPortLimit replyItem Login-LAT-Port radiusLoginLATPort replyItem Reply-Message radiusReplyMessage* 3) /etc/openldap/ldap.conf #* # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. #BASE dc=example, dc=com #URI ldap://ldap.example.com ldap://ldap-master.example.com:666 #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never #TLS_REQCERT allow* host localhost base dc=thales,dc=com 4) /etc/openldap/slapd.conf # # See slapd.conf(5) for details on configuration options. # This file should NOT be world readable. # include /etc/openldap/schema/core.schema include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/inetorgperson.schema include /etc/openldap/schema/rfc2307bis.schema include /etc/openldap/schema/yast.schema include /etc/openldap/schema/RADIUS-LDAPv3.schema # Define global ACLs to disable default read access. # Do not enable referrals until AFTER you have a working directory # service AND an understanding of referrals. #referral ldap://root.openldap.org *pidfile /var/run/slapd/slapd.pid argsfile /var/run/slapd/slapd.args* *# Load dynamic backend modules: modulepath /usr/lib/openldap/modules # moduleload back_ldap.la # moduleload back_meta.la # moduleload back_monitor.la # moduleload back_perl.la # Sample security restrictions # Require integrity protection (prevent hijacking) # Require 112-bit (3DES or better) encryption for updates # Require 63-bit encryption for simple bind # security ssf=1 update_ssf=112 simple_bind=64 # Sample access control policy: # Root DSE: allow anyone to read it # Subschema (sub)entry DSE: allow anyone to read it # Other DSEs: # Allow self write access to user password # Allow anonymous users to authenticate # Allow read access to everything else # Directives needed to implement policy: access to dn.base="" by * read access to dn.base="cn=Subschema" by * read access to attrs=userPassword,userPKCS12 by self write by * auth access to attrs=shadowLastChange by self write by * read access to * by * read* # if no access controls are present, the default policy # allows anyone and everyone to read anything but restricts # updates to rootdn. (e.g., "access to * by * read") # # rootdn can always read and write EVERYTHING! ####################################################################### # BDB database definitions ####################################################################### loglevel 0 allow bind_v2 database bdb suffix "dc=thales,dc=com" rootdn "cn=Administrator,dc=thales,dc=com" rootpw "thales" directory /var/lib/ldap checkpoint 1024 5 cachesize 10000 index objectClass eq And in /etc/raddb/sites-enabled/default file, I have enabled ldap in 'Authorize and Authenticate Section'. 5) And this is my ldapsearch output to lists my directory contents in ldif. # ldapsearch -x -h localhost objectclass=* # extended LDIF # # LDAPv3 # base <> with scope subtree # filter: objectclass=* # requesting: ALL # # thales.com dn: dc=thales,dc=com description: thales.Com, your trusted non-existent corporation. dc: thales o: thales.com objectClass: top objectClass: dcObject objectClass: organization # Users, thales.com dn: ou=Users,dc=thales,dc=com ou: Users description: thales.com Users objectClass: organizationalUnit # Groups, thales.com dn: ou=Groups,dc=thales,dc=com ou: Groups description: thales.Com Groups objectClass: organizationalUnit # System, thales.com dn: ou=System,dc=thales,dc=com ou: System description: Special accounts used by software applications. objectClass: organizationalUnit # hasan, Users, thales.com dn: uid=hasan,ou=Users,dc=thales,dc=com ou: Users uid: hasan cn: hasan syed sn: hasan givenName: syed displayName: Syed Hasan title: Systems Integrator description: Systems Integration and IT for thales.com employeeType: Employee departmentNumber: 001 employeeNumber: 001-08-98 mail: hasansyed(a)thales.com mail: hasan(a)thales.com roomNumber: 301 telephoneNumber: +1 555 555 4321 mobile: +1 555 555 6789 st: Alpes Maritimes l: Cannes street: 1234 Cicero Ave. preferredLanguage: en-us,en-gb objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson # barbara, Users, thales.com dn: uid=barbara,ou=Users,dc=thales,dc=com ou: Users uid: barbara sn: Jensen cn: Barbara Jensen givenName: Barbara displayName: Barbara Jensen mail: barbara(a)thales.com objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson # LDAP Admins, Groups, thales.com dn: cn=LDAP Admins,ou=Groups,dc=thales,dc=com cn: LDAP Admins ou: Groups description: Users who are LDAP administrators uniqueMember: uid=barbara,dc=thales,dc=com uniqueMember: uid=hasan,dc=thales,dc=com objectClass: groupOfUniqueNames # people, thales.com dn: ou=people,dc=thales,dc=com objectClass: top objectClass: organizationalUnit ou: people # group, thales.com dn: ou=group,dc=thales,dc=com objectClass: top objectClass: organizationalUnit ou: group # grouptemplate, Users, thales.com dn: cn=grouptemplate,ou=Users,dc=thales,dc=com cn: grouptemplate objectClass: top objectClass: suseObjectTemplate objectClass: suseGroupTemplate suseNamingAttribute: cn susePlugin: UsersPluginLDAPAll # usertemplate, Users, thales.com dn: cn=usertemplate,ou=Users,dc=thales,dc=com cn: usertemplate objectClass: top objectClass: suseObjectTemplate objectClass: suseUserTemplate suseDefaultValue: homedirectory=/home/%uid suseDefaultValue: loginshell=/bin/bash suseNamingAttribute: uid susePlugin: UsersPluginLDAPAll # anwar, users, thales.com dn: cn=anwar,ou=users,dc=thales,dc=com cn: anwar objectClass: top objectClass: suseModuleConfiguration objectClass: suseUserConfiguration suseDefaultBase: ou=people,dc=thales,dc=com suseDefaultTemplate: cn=usertemplate,ou=Users,dc=thales,dc=com suseMaxPasswordLength: 8 suseMaxUniqueId: 60000 suseMinPasswordLength: 5 suseMinUniqueId: 1000 suseNextUniqueId: 1000 susePasswordHash: CRYPT suseSearchFilter: objectclass=posixaccount suseSkelDir: /etc/skel # groupconfiguration, Users, thales.com dn: cn=groupconfiguration,ou=Users,dc=thales,dc=com cn: groupconfiguration objectClass: top objectClass: suseModuleConfiguration objectClass: suseGroupConfiguration suseDefaultBase: ou=group,dc=thales,dc=com suseDefaultTemplate: cn=grouptemplate,ou=Users,dc=thales,dc=com suseMaxUniqueId: 60000 suseMinUniqueId: 1000 suseNextUniqueId: 1000 suseSearchFilter: objectclass=posixgroup # search result search: 2 result: 0 Success # numResponses: 14 # numEntries: 13 By this tree structure, In the users entry, I want to authenticate the uid hasan with a user password 'thales' using radtest to check whether FreeRadius can authenticate against Openldap backend. Using the command, radtest hasan thales 192.168.1.131 1 testing123 And when I have done the above changes for OpenLdap and FreeRadius Integration. And Started FreeRadius Server using radiusd -X command. Please help me in this regard. SYED Stagiare,Thales 6) I got this Output in which the errors is failed to link rlm_ldap module . *FreeRADIUS Version 2.0.5, for host i686-pc-linux-gnu, built on Jul 21 2008 at 15:35:42 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including configuration file /usr/local/etc/raddb/snmp.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } rlm_eap: Ignoring EAP-Type/tls because we do not have OpenSSL support. rlm_eap: Ignoring EAP-Type/ttls because we do not have OpenSSL support. rlm_eap: Ignoring EAP-Type/peap because we do not have OpenSSL support. Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } server { modules { Module: Checking authenticate {...} for more modules to load /*usr/local/etc/raddb/modules/ldap[29]: Failed to link to module 'rlm_ldap': rlm_ldap.so: cannot open shared object file: No such file or directory /usr/local/etc/raddb/sites-enabled/default[275]: Failed to find module "ldap". /usr/local/etc/raddb/sites-enabled/default[275]: Failed to parse "ldap" entry. } }* * Errors initializing modules* * *

2 2

Re: PEAP mschapv2 using xp native supplicant
by Ryan Setiawan H 27 Aug '08

27 Aug '08

> The passwords you've added are invalid. The debug message is telling > you that. > > Perhaps you could try posting WHAT you entered as LM-Password and > NT-Password. Odds are you entered invalid ones. Because the debug > message is telling you that they're invalid. > Here the attribute at LDAP server for user testing dn: uid=testing,ou=dialup,dc=zzz,dc=com dialupAccess: dialup gidNumber: 1000 uid: testing userPassword: Testing10 objectClass: posixGroup objectClass: radiusprofile objectClass: uidObject objectClass: top objectClass: sambaAccount radiusTunnelType: VLAN radiusTunnelMediumType: IEEE-802 cn: testing radiusServiceType: Framed-User radiusFramedProtocol: PPP rid: 1 radiusTunnelPrivateGroupId: 101 radiusCallingStationId: 00-16-36-5a-f1-e4 radiusLoginTime: WK0800-1800 lmPassword: Testing10 ntPassword: Testing10 > You are making it difficult for anyone to help you. Giving out as > little information as possible in every message is counter-productive. > > Alan DeKok. > Sorry Alan, I don't intend to do that and make it difficult. it just usually people don't like a lot text show up and make them bored to read it, so I pick the message which I conclude have to do with the problem... I include all debug below... thanks for your help Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" EAP-Message = 0x0201000c0174657374696e67 Message-Authenticator = 0x58d7a85d7797a6a111db87923f69e24a server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 1 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound users: Matched entry DEFAULT at line 183 ++[files] returns ok ++- entering redundant-load-balance group redundant-load-balance rlm_ldap: - authorize rlm_ldap: performing user authorization for testing expand: (uid=%u) -> (uid=testing) expand: ou=dialup,dc=zzz,dc=com -> ou=dialup,dc=zzz,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=dialup,dc=zzz,dc=com, with filter (uid=testing) rlm_ldap: checking if remote access for testing is allowed by uid rlm_ldap: Added User-Password = Testing10 in check items rlm_ldap: looking for check items in directory... rlm_ldap: LDAP attribute radiusLoginTime as RADIUS attribute Login-Time == "WK0800-1800" rlm_ldap: LDAP attribute ntPassword as RADIUS attribute NT-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute lmPassword as RADIUS attribute LM-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute radiusCallingStationId as RADIUS attribute Calling-Station-Id == "00-16-36-5a-f1-e4" rlm_ldap: looking for reply items in directory... rlm_ldap: LDAP attribute radiusTunnelPrivateGroupId as RADIUS attribute Tunnel-Private-Group-Id:0 = "101" rlm_ldap: LDAP attribute radiusTunnelMediumType as RADIUS attribute Tunnel-Medium-Type:0 = IEEE-802 rlm_ldap: LDAP attribute radiusTunnelType as RADIUS attribute Tunnel-Type:0 = VLAN rlm_ldap: LDAP attribute radiusFramedProtocol as RADIUS attribute Framed-Protocol = PPP rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute Service-Type = Framed-User rlm_ldap: user testing authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[ldap_instance10] returns ok ++- redundant-load-balance group redundant-load-balance returns ok rlm_checkval: Item Name: Calling-Station-Id, Value: 00-16-36-5a-f1-e4 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-16-36-5a-f1-e4 ++[checkval] returns ok ++[expiration] returns noop rlm_logintime: Checking Login-Time: 'WK0800-1800' rlm_logintime: timestr returned accept rlm_logintime: Session-Timeout set to: 31800 ++[logintime] returns ok rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled } # server nispdot1x Framed-Compression = Van-Jacobson-TCP-IP Tunnel-Private-Group-Id:0 = "101" Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN Framed-Protocol = PPP Service-Type = Framed-User Session-Timeout = 31800 EAP-Message = 0x01020016041048440cae339c25dd9942d481c619058c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a7375571e0e26109302528641e5 Finished request 10. Going to the next request Waking up in 4.9 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a7375571e0e26109302528641e5 EAP-Message = 0x020200060319 Message-Authenticator = 0x2c169b4ad0f19c446a99e338e6b1a7c6 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 2 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound users: Matched entry DEFAULT at line 183 ++[files] returns ok ++- entering redundant-load-balance group redundant-load-balance rlm_ldap: - authorize rlm_ldap: performing user authorization for testing expand: (uid=%u) -> (uid=testing) expand: ou=dialup,dc=zzz,dc=com -> ou=dialup,dc=zzz,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=dialup,dc=zzz,dc=com, with filter (uid=testing) rlm_ldap: checking if remote access for testing is allowed by uid rlm_ldap: Added User-Password = Testing10 in check items rlm_ldap: looking for check items in directory... rlm_ldap: LDAP attribute radiusLoginTime as RADIUS attribute Login-Time == "WK0800-1800" rlm_ldap: LDAP attribute ntPassword as RADIUS attribute NT-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute lmPassword as RADIUS attribute LM-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute radiusCallingStationId as RADIUS attribute Calling-Station-Id == "00-16-36-5a-f1-e4" rlm_ldap: looking for reply items in directory... rlm_ldap: LDAP attribute radiusTunnelPrivateGroupId as RADIUS attribute Tunnel-Private-Group-Id:0 = "101" rlm_ldap: LDAP attribute radiusTunnelMediumType as RADIUS attribute Tunnel-Medium-Type:0 = IEEE-802 rlm_ldap: LDAP attribute radiusTunnelType as RADIUS attribute Tunnel-Type:0 = VLAN rlm_ldap: LDAP attribute radiusFramedProtocol as RADIUS attribute Framed-Protocol = PPP rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute Service-Type = Framed-User rlm_ldap: user testing authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[ldap_instance10] returns ok ++- redundant-load-balance group redundant-load-balance returns ok rlm_checkval: Item Name: Calling-Station-Id, Value: 00-16-36-5a-f1-e4 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-16-36-5a-f1-e4 ++[checkval] returns ok ++[expiration] returns noop rlm_logintime: Checking Login-Time: 'WK0800-1800' rlm_logintime: timestr returned accept rlm_logintime: Session-Timeout set to: 31800 ++[logintime] returns ok rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: EAP-NAK asked for EAP-Type/peap rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 ++[eap] returns handled } # server nispdot1x Framed-Compression = Van-Jacobson-TCP-IP Tunnel-Private-Group-Id:0 = "101" Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN Framed-Protocol = PPP Service-Type = Framed-User Session-Timeout = 31800 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a737456030e26109302528641e5 Finished request 11. Going to the next request Waking up in 4.9 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a737456030e26109302528641e5 EAP-Message = 0x0203005019800000004616030100410100003d030148b4bc69321696e0d1656dab694d3c387eff81c6eae128e69ac7f10a7e7ccf4700001600040005000a000900640062000300060013001200630100 Message-Authenticator = 0x3f0d589e8606511eced69d8ef80183c1 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 3 length 80 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 70 rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 085e], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled } # server nispdot1x EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xe7889fcefb2540ca2a830a91 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a737751030e26109302528641e5 Finished request 12. Going to the next request Waking up in 4.9 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a737751030e26109302528641e5 EAP-Message = 0x020400061900 Message-Authenticator = 0xf9351f3ef43c261e4525ac5fcc925cf4 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 4 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled } # server nispdot1x EAP-Message = 0x010503fc194056c741a9eb20ed7a485e12951f700004ab308204a73082038fa00302010202090093f3d8f5226c7123300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3038303731303038353730325a170d3038303830393038353730325a308193310b30090603 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x2f31d1264b04c5b4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a737650030e26109302528641e5 Finished request 13. Going to the next request Waking up in 4.9 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a737650030e26109302528641e5 EAP-Message = 0x020500061900 Message-Authenticator = 0x24d837d72e911f142726c4409b12fed7 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 5 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled } # server nispdot1x EAP-Message = 0x010600d51900845e93ce9ffc5452e73f653e704f16f3a5687176926863d49558a742cb84f6aeb016521bf6b5b28bfa804c0aea2719ac3a3df6629264b273d9498374bb2b5716c95c2db2c5a64b857c7f07e6f84c629730b2aceb3dddf4d50d7d549da3b9d5e03639b6881d7f75a86afbf799407cacee9100d670506bf5084ffe2d7ef5ff9c8f6d4b586d7ec9dc16f5c67e84f1a1817faff565ffc1642463ff7fdb1ecc13e9f87b9ce19d4715a693750e56ad468a453462abce15950da8ad436016bbd394128e09c47accf10816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a737153030e26109302528641e5 Finished request 14. Going to the next request Waking up in 4.9 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a737153030e26109302528641e5 EAP-Message = 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 EAP-Message = 0xd1bd6be8816c7e382ba7cb137963610e798319f717ef9f1d14030100010116030100205363f8669f0c24dae14fd4032f51f4cddf8de12776f47fd36d4c912257ae743e Message-Authenticator = 0x83aa0ed31684637820569d91822e4bad server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 6 length 253 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 310 rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled } # server nispdot1x EAP-Message = 0x0107003119001403010001011603010020d2f96596f1dfeb4b5ae7f057995607cd56c714c9f3af6bdfaa2435ddcdfdab78 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a737052030e26109302528641e5 Finished request 15. Going to the next request Waking up in 4.8 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a737052030e26109302528641e5 EAP-Message = 0x020700061900 Message-Authenticator = 0x5cbbec25f9dbe7886341794f3576ac57 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 7 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS ++[eap] returns handled } # server nispdot1x EAP-Message = 0x01080020190017030100156d77402b9a9913d65c34c0c79536a4de03a7df1329 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a73735d030e26109302528641e5 Finished request 16. Going to the next request Waking up in 4.8 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a73735d030e26109302528641e5 EAP-Message = 0x0208002319001703010018003d538073577b201151fcd903dc99247ce29173a24429f8 Message-Authenticator = 0x6393c4c01c39e8983c7fdd43a30beb37 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 8 length 35 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - testing PEAP: Got tunneled identity of testing PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to testing +- entering group authorize ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop ++[control] returns noop rlm_eap: EAP packet type response id 8 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++- entering redundant-load-balance group redundant-load-balance rlm_ldap: - authorize rlm_ldap: performing user authorization for testing expand: (uid=%u) -> (uid=testing) expand: ou=dialup,dc=zzz,dc=com -> ou=dialup,dc=zzz,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=dialup,dc=zzz,dc=com, with filter (uid=testing) rlm_ldap: checking if remote access for testing is allowed by uid rlm_ldap: Added User-Password = Testing10 in check items rlm_ldap: looking for check items in directory... rlm_ldap: LDAP attribute radiusLoginTime as RADIUS attribute Login-Time == "WK0800-1800" rlm_ldap: LDAP attribute ntPassword as RADIUS attribute NT-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute lmPassword as RADIUS attribute LM-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute radiusCallingStationId as RADIUS attribute Calling-Station-Id == "00-16-36-5a-f1-e4" rlm_ldap: looking for reply items in directory... rlm_ldap: LDAP attribute radiusTunnelPrivateGroupId as RADIUS attribute Tunnel-Private-Group-Id:0 = "101" rlm_ldap: LDAP attribute radiusTunnelMediumType as RADIUS attribute Tunnel-Medium-Type:0 = IEEE-802 rlm_ldap: LDAP attribute radiusTunnelType as RADIUS attribute Tunnel-Type:0 = VLAN rlm_ldap: LDAP attribute radiusFramedProtocol as RADIUS attribute Framed-Protocol = PPP rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute Service-Type = Framed-User rlm_ldap: user testing authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[ldap_instance10] returns ok ++- redundant-load-balance group redundant-load-balance returns ok ++[expiration] returns noop rlm_logintime: Checking Login-Time: 'WK0800-1800' rlm_logintime: timestr returned accept rlm_logintime: Session-Timeout set to: 31800 ++[logintime] returns ok ++[pap] returns noop WARNING: You set Proxy-To-Realm = LOCAL, but it is a LOCAL realm! Cancelling invalid proxy request. rad_check_password: Found Auth-Type EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled PEAP: Got tunneled Access-Challenge ++[eap] returns handled } # server nispdot1x EAP-Message = 0x010900381900170301002dd7a5a8ab029369cbd1ecf737adfc7a4b5daa00f6b7d7a4fcf01735dfbd3e97d4d5190063ef62a13161d21c55a9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a73725c030e26109302528641e5 Finished request 17. Going to the next request Waking up in 4.8 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a73725c030e26109302528641e5 EAP-Message = 0x020900591900170301004efa95838288851040a38ab3cae8e1f63f3de78d4dfaca64200b7cc044c9f20834365ddacbba8de1a04bf2845841de0616ffbc4af1d8efa184d3e82bf74a763c007af32d4798d15eb721709526db37 Message-Authenticator = 0x7a29bad23e8ceed045dcc246a81ebad0 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 9 length 89 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 PEAP: Setting User-Name to testing +- entering group authorize ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop ++[control] returns noop rlm_eap: EAP packet type response id 9 length 66 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++- entering redundant-load-balance group redundant-load-balance rlm_ldap: - authorize rlm_ldap: performing user authorization for testing expand: (uid=%u) -> (uid=testing) expand: ou=dialup,dc=zzz,dc=com -> ou=dialup,dc=zzz,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=dialup,dc=zzz,dc=com, with filter (uid=testing) rlm_ldap: checking if remote access for testing is allowed by uid rlm_ldap: Added User-Password = Testing10 in check items rlm_ldap: looking for check items in directory... rlm_ldap: LDAP attribute radiusLoginTime as RADIUS attribute Login-Time == "WK0800-1800" rlm_ldap: LDAP attribute ntPassword as RADIUS attribute NT-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute lmPassword as RADIUS attribute LM-Password == 0x54657374696e673130 rlm_ldap: LDAP attribute radiusCallingStationId as RADIUS attribute Calling-Station-Id == "00-16-36-5a-f1-e4" rlm_ldap: looking for reply items in directory... rlm_ldap: LDAP attribute radiusTunnelPrivateGroupId as RADIUS attribute Tunnel-Private-Group-Id:0 = "101" rlm_ldap: LDAP attribute radiusTunnelMediumType as RADIUS attribute Tunnel-Medium-Type:0 = IEEE-802 rlm_ldap: LDAP attribute radiusTunnelType as RADIUS attribute Tunnel-Type:0 = VLAN rlm_ldap: LDAP attribute radiusFramedProtocol as RADIUS attribute Framed-Protocol = PPP rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute Service-Type = Framed-User rlm_ldap: user testing authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[ldap_instance10] returns ok ++- redundant-load-balance group redundant-load-balance returns ok ++[expiration] returns noop rlm_logintime: Checking Login-Time: 'WK0800-1800' rlm_logintime: timestr returned accept rlm_logintime: Session-Timeout set to: 31800 ++[logintime] returns ok ++[pap] returns noop WARNING: You set Proxy-To-Realm = LOCAL, but it is a LOCAL realm! Cancelling invalid proxy request. rad_check_password: Found Auth-Type EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 +- entering group MS-CHAP rlm_mschap: Invalid LM-Password rlm_mschap: Invalid NT-Password rlm_mschap: Told to do MS-CHAPv2 for testing with NT-Password rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject rlm_eap: Freeing handler ++[eap] returns reject auth: Failed to validate the user. Login incorrect: [testing/<via Auth-Type = EAP>] (from client dotix port 0) PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE ++[eap] returns handled } # server nispdot1x EAP-Message = 0x010a00261900170301001b8e6e9b2da2b0242bdec84613a3729556bf12c346e1b06abad199ce Message-Authenticator = 0x00000000000000000000000000000000 State = 0x75551a737d5f030e26109302528641e5 Finished request 18. Going to the next request Waking up in 4.8 seconds. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-16-36-5a-f1-e4" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" State = 0x75551a737d5f030e26109302528641e5 EAP-Message = 0x020a00261900170301001b4a5a2ad7687a0a23d75b1068550cf25a9f1406cf7602a4404724ce Message-Authenticator = 0x227edf666d3499a59a8b1aca9a727953 server nispdot1x { +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 10 length 38 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Had sent TLV failure. User was rejected earlier in this session. rlm_eap: Handler failed in EAP/peap rlm_eap: Failed in EAP select ++[eap] returns invalid auth: Failed to validate the user. Login incorrect: [testing/<via Auth-Type = EAP>] (from client dotix port 1 cli 00-16-36-5a-f1-e4) } # server nispdot1x Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> testing attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 19 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 19 EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. Cleaning up request 10 ID 154 with timestamp +882 Cleaning up request 11 ID 155 with timestamp +882 Cleaning up request 12 ID 156 with timestamp +882 Cleaning up request 13 ID 157 with timestamp +882 Cleaning up request 14 ID 158 with timestamp +882 Cleaning up request 15 ID 159 with timestamp +882 Cleaning up request 16 ID 160 with timestamp +882 Cleaning up request 17 ID 161 with timestamp +882 Cleaning up request 18 ID 162 with timestamp +882 Waking up in 1.0 seconds. Cleaning up request 19 ID 163 with timestamp +882 Ready to process requests. -- DISCLAIMER: The contents of this email and attachments are confidential and may be subject to legal privilege. Any unauthorized use, copying, disclosure or communicating any part of it to others is strictly prohibited and may be unlawful. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately to the sender or notify us and delete the email and any attachments from your system. We cannot accept liability for loss or damage resulting from computer viruses. The integrity of email across the Internet cannot be guaranteed and PT BANK NISP, Tbk. will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to PT BANK NISP, Tbk.

2 1

re: using unlang to modify User-Name
by Ivan Kalik 26 Aug '08

26 Aug '08

Sorry. User-Name := "test2" Ivan Kalik Kalik Informatika ISP

2 1

Pop3 and LDAP authentication...Multiple radius servers
by Eric Martell 26 Aug '08

26 Aug '08

Hi, We have radius server which is inhouse which does the LDAP authentication. We got a new request from third party to do authentication for "their" users using POP3. So the request comes to radiusA (our inhouse radius). If the user has realm as @xyz.net ..then we forward the request to third party to authenticate which might be radiusB which does the authentication using POP3. If there is no realm attached, radiusA does the LDAP auth and return the response. Not sure how to specify in our radiusd.conf. I could not find any thread in the list. Please let me know the link if this is already discuss. Really Appreciated your quick response. Thanks and Regards.

3 7

mysql connection
by Ahmet DÜLGAR 26 Aug '08

26 Aug '08

hi, i uncomment sql int sites-enabled/default then i try to runi but there was error in sql.conf about the mysqldriver driver=rlm_sql_mysql but there is no file for mysql driver, because i install freeradiys2.0.5 by yum insatall freeradius on fedora i then i download the all of files from www.freeradius.org and copy only rlm_sql directory in to /etc/raddb and run radiusd -X but not clearly understand is it right directory that i copy rlm_sql where can i put them _________________________________________________________________ Gelen kutunuzda hiç yer kalmamasından bıktınız mı? Windows Live Hotmail şimdi size 5GB ÜCRETSİZ depolama alanı sunuyor! Ücretsiz Windows Live Hotmail hesabınızı buradan alın! http://get.live.com/mail/overview

5 5