September 2008 - Freeradius-Users - lists.freeradius.org

How to modify dialup.conf for each virtual server?
by Nataniel Klug 10 Sep '08

10 Sep '08

Hello again, Now I have the other question I told in the post before. I have some equipament (wireless) that authenticate the wireless client using MAC over my radius database. I want that in one of my virtual servers I have this kind of authentication. I need it to check MAC address that is, already, in my radcheck table. this is a common user setup into radcheck table: +------+----------+--------------------+----+-------------------+--------+------+ | id | UserName | Attribute | op | Value | numero | obs | +------+----------+--------------------+----+-------------------+--------+------+ | 1613 | nataniel | MD5-Password | := | XXXXXXXXX | 01046 | | | 1656 | nataniel | Calling-Station-Id | == | AA:AA:AA:AA:AA:AA | 01046 | NULL | +------+----------+--------------------+----+-------------------+--------+------+ So, MAC Address is set as "Calling-Station-Id". This is ok for my PPPoE setup but for my access points this is not ok. I need my access point to verify if this MAC here is well listed and not bloked. I use this to blok: +------+----------+--------------------+----+-------------------+--------+------+ | id | UserName | Attribute | op | Value | numero | obs | +------+----------+--------------------+----+-------------------+--------+------+ | 1613 | nataniel | MD5-Password | := | XXXXXXXXX | 01046 | | | 1656 | nataniel | Calling-Station-Id | == | AA:AA:AA:AA:AA:AA | 01046 | NULL | | 1657 | nataniel | Auth-Type | := | Reject | 01046 | NULL | +------+----------+--------------------+----+-------------------+--------+------+ I have to change dialup.conf to meet this options and returno to my access point. This is a common query comming from on of my APs: Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 172.30.0.142 port 6001, id=1, length=69 User-Name = "00:19:79:0f:98:3d" User-Password = "wireless" NAS-IP-Address = 172.30.0.142 NAS-Port = 0 +- entering group authorize ++[preprocess] returns ok rlm_realm: No '@' in User-Name = "00:19:79:0f:98:3d", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop expand: %{User-Name} -> 00:19:79:0f:98:3d rlm_sql (sql): sql_set_user escaped user --> '00:19:79:0f:98:3d' rlm_sql (sql): Reserving sql socket id: 4 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '00:19:79:0f:98:3d' ORDER BY id expand: SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM usergroup WHERE username = '00:19:79:0f:98:3d' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 rlm_sql (sql): User 00:19:79:0f:98:3d not found ++[sql] returns notfound rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Found Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Sending Access-Reject of id 1 to 172.30.0.142 port 6001 Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 1 with timestamp +274 Ready to process requests. So, where I see "WHERE username = '00:19:79:0f:98:3d' " it should be Attribute. But I need to be sure that this client is not rejected somewhere in the database. Can someone help me? I am not a guru of mysql but I can try some changes... ;) -- Att, NATANIEL KLUG nata(a)cnett.com.br LEIA O DIA-A-DIA DO NATA http://nataklug.blogspot.com/ Cyber Nett - Internet Banda Larga www.cnett.com.br (42) 3635-2957 Rua Diogo Pinto, 1046, Centro Laranjeiras do Sul - PR Brasil - 85301-290 "... também os sábios possuem coração tangível e podem, por vezes, usar da ciência como meio de demonstrar impressões sentimentais de que muitos não os julgam suscetíveis." Visconde de Taunay

2 8

freeradius version 1.0.x Vs 2.x.x
by Abraham Jacob 10 Sep '08

10 Sep '08

Hi, I have been using freeradius 1.0.5 for captive portal authentication in our internal network. I use mysql as backend for radius and using sqlcounter to check monthly usage. I was trying out freeradius version 2.1.0 and found out that check attribute values from radcheck table being replaced by values from radgroupcheck. For example, sqlcounter is using Session-Timeout = 28800 if I use freeradius version 1.0.5 and Session-Timeout = 14400 if I use version 2.1.0. Debug from 1.0.5: rlm_sqlcounter: Authorized user test, check_item=28800, counter=509 rlm_sqlcounter: Sent Reply-Item for user test, Type=Session-Timeout, value=28291 modcall[authorize]: module "noresetcounter" returns ok for request 2 modcall: leaving group authorize (returns ok) for request 2 Debug from 2.1.0: rlm_sqlcounter: Authorized user test, check_item=14400, counter=509 rlm_sqlcounter: Sent Reply-Item for user akj, Type=Session-Timeout, value=13891 ++[noresetcounter] returns ok radcheck table: +----+----------+--------------------+------------------------------------+----+ | id | username | attribute | value | op | +----+----------+--------------------+------------------------------------+----+ | 7 | test | Crypt-Password | $1$WXkDxOPI$hZadd2xez2Xl7k4asVqOG. | := | | 9 | test | Session-Timeout | 28800 | := | +----+----------+--------------------+------------------------------------+----+ radgroupcheck table: +----+-----------+----------------------+-------+----+ | id | groupname | attribute | Value | op | +----+-----------+----------------------+-------+----+ | 1 | test | Session-Timeout | 14400 | := | +----+-----------+----------------------+-------+----+ radusergroup table: +----------+-----------+----------+ | username | groupname | priority | +----------+-----------+----------+ | test | test | 1 | +----------+-----------+----------+ sqlcounter: sqlcounter noresetcounter { counter-name = sess_timeout check-name = Session-Timeout reply-name = Session-Timeout sqlmod-inst = sql key = User-Name reset = never query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" } I have tested this with version 2.0.5 and got same result. Is this the expected behavior in version 2.x.x? Thanks, Abraham

1 1

Re: Joker character to allow everyone in a SQL table
by via.lej＠free.fr 10 Sep '08

10 Sep '08

>DEFAULT Auth-Type:= Accept > >in users file. > >Ivan Kalik >Kalik Informatika ISP Thanks for your reply but it's not working, this is my users file: =====BOF===== # # Please read the documentation file ../doc/processing_users_file, # or 'man 5 users' (after installing the server) for more information. # # This file contains authentication security and configuration # information for each user. Accounting requests are NOT processed # through this file. Instead, see 'acct_users', in this directory. # # The first field is the user's name and can be up to # 253 characters in length. This is followed (on the same line) with # the list of authentication requirements for that user. This can # include password, comm server name, comm server port number, protocol # type (perhaps set by the "hints" file), and huntgroup name (set by # the "huntgroups" file). # # If you are not sure why a particular reply is being sent by the # server, then run the server in debugging mode (radiusd -X), and # you will see which entries in this file are matched. # # When an authentication request is received from the comm server, # these values are tested. Only the first match is used unless the # "Fall-Through" variable is set to "Yes". # # A special user named "DEFAULT" matches on all usernames. # You can have several DEFAULT entries. All entries are processed # in the order they appear in this file. The first entry that # matches the login-request will stop processing unless you use # the Fall-Through variable. # # If you use the database support to turn this file into a .db or .dbm # file, the DEFAULT entries _have_ to be at the end of this file and # you can't have multiple entries for one username. # # You don't need to specify a password if you set Auth-Type += System # on the list of authentication requirements. The RADIUS server # will then check the system password file. # # Indented (with the tab character) lines following the first # line indicate the configuration values to be passed back to # the comm server to allow the initiation of a user session. # This can include things like the PPP configuration values # or the host to log the user onto. # # You can include another `users' file with `$INCLUDE users.other' # # # For a list of RADIUS attributes, and links to their definitions, # see: # # http://www.freeradius.org/rfc/attributes.html # # # Deny access for a specific user. Note that this entry MUST # be before any other 'Auth-Type' attribute which results in the user # being authenticated. # # Note that there is NO 'Fall-Through' attribute, so the user will not # be given any additional resources. # #lameuser Auth-Type := Reject # Reply-Message = "Your account has been disabled." # # Deny access for a group of users. # # Note that there is NO 'Fall-Through' attribute, so the user will not # be given any additional resources. # #DEFAULT Group == "disabled", Auth-Type := Reject # Reply-Message = "Your account has been disabled." # # # This is a complete entry for "steve". Note that there is no Fall-Through # entry so that no DEFAULT entry will be used, and the user will NOT # get any attributes in addition to the ones listed here. # #steve Auth-Type := Local, User-Password == "testing" # Service-Type = Framed-User, # Framed-Protocol = PPP, # Framed-IP-Address = 172.16.3.33, # Framed-IP-Netmask = 255.255.255.0, # Framed-Routing = Broadcast-Listen, # Framed-Filter-Id = "std.ppp", # Framed-MTU = 1500, # Framed-Compression = Van-Jacobsen-TCP-IP # # This is an entry for a user with a space in their name. # Note the double quotes surrounding the name. # #"John Doe" Auth-Type := Local, User-Password == "hello" # Reply-Message = "Hello, %u" # # Dial user back and telnet to the default host for that port # #Deg Auth-Type := Local, User-Password == "ge55ged" # Service-Type = Callback-Login-User, # Login-IP-Host = 0.0.0.0, # Callback-Number = "9,5551212", # Login-Service = Telnet, # Login-TCP-Port = Telnet # # Another complete entry. After the user "dialbk" has logged in, the # connection will be broken and the user will be dialed back after which # he will get a connection to the host "timeshare1". # #dialbk Auth-Type := Local, User-Password == "callme" # Service-Type = Callback-Login-User, # Login-IP-Host = timeshare1, # Login-Service = PortMaster, # Callback-Number = "9,1-800-555-1212" # # user "swilson" will only get a static IP number if he logs in with # a framed protocol on a terminal server in Alphen (see the huntgroups file). # # Note that by setting "Fall-Through", other attributes will be added from # the following DEFAULT entries # #swilson Service-Type == Framed-User, Huntgroup-Name == "alphen" # Framed-IP-Address = 192.168.1.65, # Fall-Through = Yes # # If the user logs in as 'username.shell', then authenticate them # against the system database, give them shell access, and stop processing # the rest of the file. # #DEFAULT Suffix == ".shell", Auth-Type := System # Service-Type = Login-User, # Login-Service = Telnet, # Login-IP-Host = your.shell.machine # # The rest of this file contains the several DEFAULT entries. # DEFAULT entries match with all login names. # Note that DEFAULT entries can also Fall-Through (see first entry). # A name-value pair from a DEFAULT entry will _NEVER_ override # an already existing name-value pair. # # # First setup all accounts to be checked against the UNIX /etc/passwd. # (Unless a password was already given earlier in this file). # ##DEFAULT Auth-Type = System ##Fall-Through = 1 DEFAULT Auth-Type := Accept # # Set up different IP address pools for the terminal servers. # Note that the "+" behind the IP address means that this is the "base" # IP address. The Port-Id (S0, S1 etc) will be added to it. # #DEFAULT Service-Type == Framed-User, Huntgroup-Name == "alphen" # Framed-IP-Address = 192.168.1.32+, # Fall-Through = Yes #DEFAULT Service-Type == Framed-User, Huntgroup-Name == "delft" # Framed-IP-Address = 192.168.2.32+, # Fall-Through = Yes # # Defaults for all framed connections. # ##DEFAULT Service-Type == Framed-User ## Framed-IP-Address = 255.255.255.254, ## Framed-MTU = 576, ## Service-Type = Framed-User, ## Fall-Through = Yes # # Default for PPP: dynamic IP address, PPP mode, VJ-compression. # NOTE: we do not use Hint = "PPP", since PPP might also be auto-detected # by the terminal server in which case there may not be a "P" suffix. # The terminal server sends "Framed-Protocol = PPP" for auto PPP. # DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP # # Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression. # DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP # # Default for SLIP: dynamic IP address, SLIP mode. # DEFAULT Hint == "SLIP" Framed-Protocol = SLIP # # Last default: rlogin to our main server. # #DEFAULT # Service-Type = Login-User, # Login-Service = Rlogin, # Login-IP-Host = shellbox.ispdomain.com # # # # Last default: shell on the local terminal server. # # # DEFAULT # Service-Type = Shell-User # On no match, the user is denied access. =====EOF===== What is the problem ? Regards, Dav

3 2

Joker character to allow everyone in a SQL table
by via.lej＠free.fr 10 Sep '08

10 Sep '08

Hello all ! I'm using a FreeRadius server 1.1.3. It is configured to use a SQL table (which contains some mac addresses to allow user to access to the network or not). This night the SQL table has flushed. Is there some joker characters I can put in the SQL table to allow everyone while I build up the table again ? Or any other way to do that ? Regards, Dav

2 1

Joker character to allow everyone in a SQL table
by via.lej＠free.fr 10 Sep '08

10 Sep '08

Hello all ! I'm using a FreeRadius server 1.1.3. It is configured to use a SQL table (which contains some mac addresses to allow user to access to the network or not). This night the SQL table has flushed. Is there some joker characters I can put in the SQL table to allow everyone while I build up the table again ? Or any other way to do that ? Regards, Dav

1 0

using sqlcounters
by Alexandre Chapellon 09 Sep '08

09 Sep '08

Hello, I want to setup sqlcounter to prevent users to login once they have reached traffic quota. So i added a new specific sqlcounter in raddbb_dir/sql/mysql/counter.conf, and the name of that counter in the authrorize section. All is as follow: #####counter.conf##### sqlcounter bytesQuota { counter-name = traffic_quota check-name = Max-Traffic sqlmod-inst = mysqldb key = User-Name reset = hourly query = "SELECT SUM(acctinputoctets + acctoutputoctets) FROM radacct WHERE UserNmae='%{%k}'" } #####virtual_server##### authorize { ... bytesQuota } #####users file##### scott Mana-Traffic = 101, Cleartext-Password := "tiger" whenever i launch freeradius -X I get the folloawing error: /etc/freeradius/users[205]: Parse error (check) for entry scott: Invalid octet string "101" for attribute name "Max-Traffic" Line 205 is the line where user scott is defined in users files. I have tryed setting up my own dictionnary (which i think shouldn't be needed) with the Max-Traffic attribute defined as interger VENDOR ME ATTRIBUTE Max-Traffic 1 integer But that doesn't help. I have read all over the web that sqlcounter with mysql are considered as stable enough for production , so am quite surprised of this issue... Any idea?

4 15

error when created client certificates
by Martin Silvero 09 Sep '08

09 Sep '08

hello again!! =) when i run "make client.pem", according the file certs/README, have this error: [root@radius certs]# make client.pem openssl req -new -out client.csr -keyout client.key -config ./client.cnf Generating a 2048 bit RSA private key ......................................................................................................................................................................................................+++ ...........................+++ writing new private key to 'client.key' ----- openssl ca -batch -keyfile server.key -cert server.crt -in client.csr -key `grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -out client.crt -extensions xpclient_ext -extfile xpextensions -config ./client.cnf Using configuration from ./client.cnf unable to load CA private key 24500:error:06065064:digital envelope routines:EVP_DecryptFinal_ex:bad decrypt:evp_enc.c:461: 24500:error:0906A065:PEM routines:PEM_do_header:bad decrypt:pem_lib.c:425: make: *** [client.crt] Error 1 some know why? many thanks!

1 0

minor prefix problem with 2.1.1 git
by Greg Woods 09 Sep '08

09 Sep '08

I tried to use a non-default prefix, and it craps out on "make install" because one of the sql-related files refuses to install in a directory name that didn't end with /usr/local/lib . I was able to work around this by using a --prefix like "/local/freeradius-git/usr/local" instead of just "/local/freeradius-git". A minor annoyance but I thought others might want to hear about it. At least the error message was clear enough that coming up with the workaround was easy. --Greg

2 1

Problems with the authentication TLS
by Martin Silvero 09 Sep '08

09 Sep '08

and install the new version and the probe, probe with radtest and I get this: Sending Access-Request of id 236 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "testing123" NAS-IP-Address = 10.30.1.104 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=236, length=20 its ok but... radiusd -X run and I get this:: FreeRADIUS Version 2.0.5, for host x86_64-unknown-linux-gnu, built on Sep 3 2008 at 17:32:08 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including configuration file /usr/local/etc/raddb/snmp.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } } client 10.0.6.29 { require_message_authenticator = no secret = "testing123" shortname = "ap" } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" } Generating a 2048 bit RSA private key ........................................................................................................................................................................................................................................................................................................+++ .....+++ unable to write 'random state' writing new private key to 'ca.key' ----- Generating a 2048 bit RSA private key .......+++ ..................................+++ unable to write 'random state' writing new private key to 'server.key' ----- Using configuration from ./server.cnf Check that the request matches the signature Signature ok Certificate Details: Serial Number: 1 (0x1) Validity Not Before: Sep 3 20:51:16 2008 GMT Not After : Sep 3 20:51:16 2009 GMT Subject: countryName = FR stateOrProvinceName = Radius organizationName = Example Inc. commonName = Example Server Certificate emailAddress = admin(a)example.com X509v3 extensions: X509v3 Extended Key Usage: TLS Web Server Authentication Certificate is to be certified until Sep 3 20:51:16 2009 GMT (365 days) Write out database with 1 new entries Data Base Updated unable to write 'random state' unable to write 'random state' MAC verified OK Generating DH parameters, 1024 bit long safe prime, generator 2 This is going to take a long time *****************************+*************************+****************************** ... unable to write 'random state' Exec-Program output: openssl req -new -x509 -keyout ca.key -out ca.pem -config ./ca.cnf openssl x509 -inform PEM -outform DER -in ca.pem -out ca.der openssl req -new -out server.csr -keyout server.key -config ./server.cnf openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr -key `grep output_password ca.cnf | sed 's/.*=//;s/^ *//'` -out server.crt -extensions xpserver_ext -extfile xpextensions -config ./server.cnf openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl pkcs12 -in server.p12 -out server.pem -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl dhparam -out dh 1024 Exec-Program-Wait: plaintext: openssl req -new -x509 -keyout ca.key -out ca.pem -config ./ca.cnf openssl x509 -inform PEM -outform DER -in ca.pem -out ca.der openssl req -new -out server.csr -keyout server.key -config ./server.cnf openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr -key `grep output_password ca.cnf | sed 's/.*=//;s/^ *//'` -out server.crt -extensions xpserver_ext -extfile xpextensions -config ./server.cnf openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl pkcs12 -in server.p12 -out server.pem -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl dhparam -out dh 1024 Exec-Program: returned: 0 Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 ERROR: Failed to open socket: cannot bind socket: Address already in use /usr/local/etc/raddb/radiusd.conf[236]: Error binding to port for 0.0.0.0port 1812 Why is this wrong? I triyin with user root -- -- Silvero Martin

2 1

Two radius server on same machine
by Nataniel Klug 09 Sep '08

09 Sep '08

Hello all, I am trying to find some info about running two freeradius servers (on different ports) in the same machine. Can someone help me? I couldn't find any info... -- Att, NATANIEL KLUG nata(a)cnett.com.br LEIA O DIA-A-DIA DO NATA http://nataklug.blogspot.com/ Cyber Nett - Internet Banda Larga www.cnett.com.br (42) 3635-2957 Rua Diogo Pinto, 1046, Centro Laranjeiras do Sul - PR Brasil - 85301-290 "... também os sábios possuem coração tangível e podem, por vezes, usar da ciência como meio de demonstrar impressões sentimentais de que muitos não os julgam suscetíveis." Visconde de Taunay

5 5