November 2009 - Freeradius-Users - lists.freeradius.org

FreeRadius with 3COM
by Rafael Fernandes 07 Nov '09

07 Nov '09

Hi all, i´m in trouble. I need to authenticate a 3COM 4210 switch with freeradius. The 3COM send the message and the freeradius answers with accept as above: Sending Access-Accept of id 21 to 172.21.23.2 port 5001 Framed-Compression := None Service-Type := Login-User Framed-Protocol := PPP Framed-MTU := 1500 But 3COM gives "Login Failed" Can anybody give me an help? Thanks, Rafael Fernandes

5 7

Upgrade From 1 to 2 - problem with authorize
by Robert White 07 Nov '09

07 Nov '09

Hi, I'm trying to upgrade my setup from freeradius 1 to freeradius 2. I've been making little changes to the config as suggested in the doc and I managed to get my setup connecting to my mssql backend. However, when I try and authorize with a user/pass, I get an error - actually more of a warning. I've Googled about but although others have had this error I haven't really seen a good explanation of why it occurs let alone how to solve. The warning is... rad_recv: Access-Request packet from host 10.152.0.7 port 20001, id=16, length=168 NAS-IP-Address = 10.152.0.7 User-Name = "999999999" User-Password = "999999999" Service-Type = Login-User NAS-Port-Type = Async Calling-Station-Id = "1002" Quintum-h323-conf-id = "h323-conf-id=34616537 32353264 62350001 00080000" Quintum-AVPair = "h323-ivr-out=ACCESSCODE:990006" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [suffix] No '@' in User-Name = "999999999", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop [sql] expand: %{User-Name} -> 999999999 [sql] sql_set_user escaped user --> '999999999' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT [id], UserName, Attribute, [Value], op FROM dbo.Rad_Authorize_User_Check('%{SQL-User-Name}') -> SELECT [id], UserName, Attribute, [Value], op FROM dbo.Rad_Authorize_User_Check('999999999') query: SELECT [id], UserName, Attribute, [Value], op FROM dbo.Rad_Authorize_User_Check('999999999') WARNING: Found User-Password == "...". WARNING: Are you sure you don't mean Cleartext-Password? WARNING: See "man rlm_pap" for more information. [sql] User found in radcheck table rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +- entering group PAP {...} [pap] login attempt with password "999999999" [pap] Using clear text password "999999999" [pap] User authenticated successfully ++[pap] returns ok Login OK: [999999999] (from client 10.152.0.7 port 0 cli 1002) +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 16 to 10.152.0.7 port 20001 Finished request 0. Although the last line there says 'Sending Access-Accept', I do not get authorized at the NAS end. Here's how things play out on my old version 1 setup.... rad_recv: Access-Request packet from host 10.152.0.7:20001, id=31, length=168 NAS-IP-Address = 10.152.0.7 User-Name = "999999999" User-Password = "999999999" Service-Type = Login-User NAS-Port-Type = Async Calling-Station-Id = "1002" Quintum-h323-conf-id = "h323-conf-id=34616537 32383034 62640001 00080000" Quintum-AVPair = "h323-ivr-out=ACCESSCODE:990006" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "999999999", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 0 radius_xlat: '999999999' rlm_sql (sql): sql_set_user escaped user --> '999999999' radius_xlat: 'SELECT [id], UserName, Attribute, [Value], op FROM dbo.Rad_Authorize_User_Check('999999999')' rlm_sql (sql): Reserving sql socket id: 49 query: SELECT [id], UserName, Attribute, [Value], op FROM dbo.Rad_Authorize_User_Check('999999999') radius_xlat: 'SELECT * FROM dbo.Rad_Group_Check('999999999')' query: SELECT * FROM dbo.Rad_Group_Check('999999999') radius_xlat: '' radius_xlat: 'EXEC Rad_Authenticate @username = '999999999', @dialstring_from = '1002', @dialstring_to = '', @gw_session_id = '34616537 32383034 62640001 00080000', @ivr_out = 'h323-ivr-out=ACCESSCODE:990006', @gw_ip = '10.152.0.7', @call_origin = '', @gw_name = '' ' query: EXEC Rad_Authenticate @username = '999999999', @dialstring_from = '1002', @dialstring_to = '', @gw_session_id = '34616537 32383034 62640001 00080000', @ivr_out = 'h323-ivr-out=ACCESSCODE:990006', @gw_ip = '10.152.0.7', @call_origin = '', @gw_name = '' rlm_sql (sql): Released sql socket id: 49 modcall[authorize]: module "sql" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied User-Password matches local User-Password Login OK: [999999999] (from client cms port 0 cli 1002) Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 0 rlm_sql (sql): Processing sql_postauth radius_xlat: '999999999' rlm_sql (sql): sql_set_user escaped user --> '999999999' modcall[post-auth]: module "sql" returns noop for request 0 modcall: leaving group post-auth (returns noop) for request 0 Sending Access-Accept of id 31 to 10.152.0.7 port 20001 h323-return-code = "h323-return-code=0" h323-billing-model = "h323-billing-model=0" h323-credit-amount = "h323-credit-amount=76.15" h323-currency = "h323-currency=AUD" Finished request 0 Thanks for any assistance, Rob

5 9

Best way to do LDAP user based server restrictions?
by Peter Lambrechtsen 06 Nov '09

06 Nov '09

I have configured FR 2.1.7 successfully and just wanted to confirm this is the best way to achieve what I am wanting to do. I have large number nas elements scattered throughout the network that we are trying to centralise on a pair of redundant FR servers. The authentication will be based on users out of LDAP, and I would also like to have the authorzation based on LDAP groups, so I can add a user into a group in LDAP and they will then have access to login to the NAS device. As part of this we need to restrict certain nas types to a certain group of people, and return additional items as part of the Access-Accept such as "Service-Type = "Login-User" or Cisco-avpair = "shell:priv-lvl=15" and such like. In LDAP I have the following group and OU structure for NAS systems, and potentially there are any number of different responses depending on their access level per system, and thus I plan to add different users into the relevant group. cn=ResponseValue,ou=NAS,ou=Radius,o=Org ie: cn=Login-User,ou=SystemA,ou=Radius,o=Org cn=Login-Admin,ou=SystemA,ou=Radius,o=Org cn=Level1,ou=SystemB,ou=Radius,o=Org cn=Level7,ou=SystemB,ou=Radius,o=Org cn=Level15,ou=SystemB,ou=Radius,o=Org The only way I have got this to effectivly work is as follows: in the sites-enabled/default I have: authorize { ldap } authenticate { Auth-Type LDAP { ldap } post-auth { files } Then after I have modified the modules/files and added "postauth_usersfile = ${confdir}/postauth_users" I also add in all the same devices in the same nas group into the huntgroups file such as: SystemA NAS-IP-Address == 192.168.1.1 In the postauth_users file I need to put the logic to say if you are a member of this LDAP Group, and coming from this Hostgroup NAS server, then Access-Accept & include the correct reply. DEFAULT Huntgroup-Name == SystemA, Ldap-Group == "cn=Login-User,ou=SystemA,ou=Radius,o=Org", Auth-Type := Accept Service-Type = "Login-User" DEFAULT Huntgroup-Name == SystemA, Ldap-Group == "cn=Login-Admin,ou=SystemA,ou=Radius,o=Org", Auth-Type := Accept Service-Type = "Login-Admin" DEFAULT Huntgroup-Name == SystemB, Ldap-Group == "cn=Level1,ou=SystemB,ou=Radius,o=Org", Auth-Type := Accept Cisco-avpair = "shell:priv-lvl=1" and so on. Is there an easier way to have grainular system access controls based on group memberships out of ldap? As it's a pain to have one to one matchup from ldap groups, to the postauth_users. Thanks Peter

1 1

RE: Freeradius-Users Digest, Vol 55, Issue 25
by Peter Carlstedt 06 Nov '09

06 Nov '09

> From: freeradius-users-request(a)lists.freeradius.org > Subject: Freeradius-Users Digest, Vol 55, Issue 25 > To: freeradius-users(a)lists.freeradius.org > Date: Fri, 6 Nov 2009 16:06:28 +0100 > > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: FreeRADIUS + Postgresql dies unexpectedly (Duarte Fonseca) > 2. Re: Unexpected "Exiting normally" 2.1.8? (Alexander Clouter) > 3. Question about Real Dinamics Ldap Groups > (Alejandro Escanero Blanco) > 4. Re: Unexpected "Exiting normally" 2.1.8? (Craig Campbell) > 5. RE: Freeradius-Users Digest, Vol 55, Issue 24 (Peter Carlstedt) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 6 Nov 2009 13:48:04 +0000 > From: Duarte Fonseca <fonseca.duarte(a)gmail.com> > Subject: Re: FreeRADIUS + Postgresql dies unexpectedly > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <dd6b74fd0911060548q335e88ale1756b366ef35a0f(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Thank you Alan, > > Cheers, > > Duarte > > 2009/11/6 Alan DeKok <aland(a)deployingradius.com>: > > Duarte Fonseca wrote: > >> Hi list, > >> > >> Just checking if anyone has any more suggestions on how I should > >> proceed with this. > > > > ?A fix is in the "stable" branch of git. > > > > ?Alan DeKok. > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > > > ------------------------------ > > Message: 2 > Date: Fri, 6 Nov 2009 13:21:14 +0000 > From: Alexander Clouter <alex(a)digriz.org.uk> > Subject: Re: Unexpected "Exiting normally" 2.1.8? > To: freeradius-users(a)lists.freeradius.org > Message-ID: <afkds6-9re.ln1(a)chipmunk.wormnet.eu> > > Craig Campbell <craig(a)ccraft.ca> wrote: > > > > [snipped] > > > > I then ran the code from within gdb as Alexander described (within screen - > > thanks!) > > > > gdb radiusd > > (gdb) run -f > > <messages program runs until...> > > Detaching after fork from child process 14277. > > Detaching after fork from child process 14334. > > Detaching after fork from child process 14364. > > Detaching after fork from child process 14394. > > Detaching after fork from child process 14424. > > > > Program received signal SIGTERM, Terminated. > > 0x0000003acf4306a7 in kill () from /lib64/libc.so.6 > > (gdb) where > > #0 0x0000003acf4306a7 in kill () from /lib64/libc.so.6 > > #1 0x0000000000424186 in main (argc=2, argv=0x7fff67ce72d8) at > > radiusd.c:419 > > (gdb) > > > > The gdb output is identical for the other radius server. > > > > I'm afraid I haven't helped much. The source I have was acquired Oct 20 > > 15:05 (EST) if that helps in any way. Perhaps I have fewer of the suspected > > patches in my build than you have in yours? Is there a way we could > > compare? > > > > Is there any way I can get more information out of these test runs? > > > Afraid that is all there is to see. If this was a more 'interesting' > bug you would get a lot more, but the nature of this particular bug > means you do not get much. > > Now you have the compiling of FreeRADIUS working and got a successful > round of GDB cooking, you need to play with 'git bisect' to pin it down > to which patch broke things. > > Cheers > > -- > Alexander Clouter > .sigmonster says: You have many friends and very few living enemies. > > > > ------------------------------ > > Message: 3 > Date: Fri, 06 Nov 2009 15:09:32 +0100 > From: Alejandro Escanero Blanco > <alejandro.escanero.ext(a)juntadeandalucia.es> > Subject: Question about Real Dinamics Ldap Groups > To: Freeradius-Users(a)lists.freeradius.org > Message-ID: <4AF42E1C.2050805(a)juntadeandalucia.es> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Is this possible? > > My Case: > I have a ldap group called cn=mygroup,o=myorg,c=mycountry > A user: cn=myuser,o=myorg,c=mycountry > The configuration for ldap have: > > groupname_attribute = cn > groupmembership_filter = > "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name:-%{User-Name}}))" > groupmembership_attribute = radiusGroupName > > An the user file have: > > DEFAULT Ldap-Group == mygroup > Tunnel-Medium-Type = IEEE-802, > Tunnel-Type = VLAN, > Tunnel-Private-Group-Id = 1, > Fall-Through = No > > Everything is going ok, but i want more and begin to test: > > DEFAULT Ldap-Group == mygroup > Tunnel-Medium-Type = IEEE-802, > Tunnel-Type = VLAN, > Tunnel-Private-Group-Id = > `%{ldap:ldap:///cn=mygroup,o=myorg,c=mycountry?radiusTunnelPrivateGroupId?base?memberUid=%{Stripped-User-Name}}`, > Fall-Through = No > > Adding the radiusProfile Object to the posixGroup, and put the attribute > radiusTunnelPrivateGroupId as 1. Going ok > > But i want to manage all from ldap and this configuration fail because > radius can't get the ldap group list and don't check the groups. > > DEFAULT Ldap-Group == * > Tunnel-Medium-Type = IEEE-802, > Tunnel-Type = VLAN, > Tunnel-Private-Group-Id = > `%{ldap:ldap:///cn=%{Ldap-Group},o=myorg,c=mycountry?radiusTunnelPrivateGroupId?base?memberUid=%{Stripped-User-Name}}`, > Fall-Through = No > > > There are any solution to fully manage the groups from ldap? > > Thanks. > > > -- > ------------------------- > Alejandro Escanero Blanco > Secretar?a General T?cnica - Servicio de Inform?tica Sistemas > Tel: 671 569 262 (769262) > Consejer?a de Innovaci?n, Ciencia y Empresa > Junta de Andaluc?a > > > > ------------------------------ > > Message: 4 > Date: Fri, 6 Nov 2009 09:49:07 -0500 > From: "Craig Campbell" <craig(a)ccraft.ca> > Subject: Re: Unexpected "Exiting normally" 2.1.8? > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID: <107F52926AE347A788B12B53F98792F5@craigPC> > Content-Type: text/plain; format=flowed; charset="iso-8859-1"; > reply-type=original > > Regarding git bisect. I know the current version is "bad", but I have no > idea if any 2.1.8 version is 'Good'. > > If there a way to use git bisect without identifying 'good'? How can we > find the first version? Can we assume it was 'good'? > > Sorry to be so non knowledgeable about git. > > -craig > ----- Original Message ----- > From: "Alexander Clouter" <alex(a)digriz.org.uk> > To: <freeradius-users(a)lists.freeradius.org> > Sent: Friday, November 06, 2009 8:21 AM > Subject: Re: Unexpected "Exiting normally" 2.1.8? > > > > Craig Campbell <craig(a)ccraft.ca> wrote: > >> > >> [snipped] > >> > >> I then ran the code from within gdb as Alexander described (within > >> screen - > >> thanks!) > >> > >> gdb radiusd > >> (gdb) run -f > >> <messages program runs until...> > >> Detaching after fork from child process 14277. > >> Detaching after fork from child process 14334. > >> Detaching after fork from child process 14364. > >> Detaching after fork from child process 14394. > >> Detaching after fork from child process 14424. > >> > >> Program received signal SIGTERM, Terminated. > >> 0x0000003acf4306a7 in kill () from /lib64/libc.so.6 > >> (gdb) where > >> #0 0x0000003acf4306a7 in kill () from /lib64/libc.so.6 > >> #1 0x0000000000424186 in main (argc=2, argv=0x7fff67ce72d8) at > >> radiusd.c:419 > >> (gdb) > >> > >> The gdb output is identical for the other radius server. > >> > >> I'm afraid I haven't helped much. The source I have was acquired Oct 20 > >> 15:05 (EST) if that helps in any way. Perhaps I have fewer of the > >> suspected > >> patches in my build than you have in yours? Is there a way we could > >> compare? > >> > >> Is there any way I can get more information out of these test runs? > >> > > Afraid that is all there is to see. If this was a more 'interesting' > > bug you would get a lot more, but the nature of this particular bug > > means you do not get much. > > > > Now you have the compiling of FreeRADIUS working and got a successful > > round of GDB cooking, you need to play with 'git bisect' to pin it down > > to which patch broke things. > > > > Cheers > > > > -- > > Alexander Clouter > > .sigmonster says: You have many friends and very few living enemies. > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > __________ Information from ESET Smart Security, version of virus > > signature database 4578 (20091106) __________ > > > > The message was checked by ESET Smart Security. > > > > http://www.eset.com > > > > > > > > > __________ Information from ESET Smart Security, version of virus signature database 4579 (20091106) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > > > > > > ------------------------------ > > Message: 5 > Date: Fri, 6 Nov 2009 15:06:22 +0000 > From: Peter Carlstedt <pc_007(a)hotmail.com> > Subject: RE: Freeradius-Users Digest, Vol 55, Issue 24 > To: <freeradius-users(a)lists.freeradius.org> > Message-ID: <SNT120-W414BEC3E84753919CF4B70B4AF0(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > > Hi all, > > > > I found the folder where clients.conf and so on where installed. > > Now I obviusly got another error. > > > > I will step by step explain what I?ve done. > > > > 1. Downloaded FreeRadius 2.1.7 > > 2. Went into the terminel and extracted the tar.gz file of FreeRadius onto the home/name/Desktop > > 3. Made my way into the newly extracted folder cd /home/peter/Desktop/FreeRadius-2.7.1 > > 4. Jumped into the folder called "Debian" and checked if the files "control" and "rules" had the lines which enables SSL so I can use PEAP. > > 5. Went back one step back to the main folder of FreeRadius (/home/peter/Desktop/FreeRadius-2.7.1/ > > 6. wrote in terminal "./configure" > 7. wrote in terminal "make" > > 8. wrote in terminal "sudo make install" > > > > Before all this I made sure that OpenSSL was installed together with libssl-dev and libpq-dev. > > > > Then after the installation was finished I wrote "sudo radiusd -X" and got an error message after it tried to load "clients.conf" which said "Segmentation fault". I have tried to find anything on the net about it but cannot find any information which helps me with this problem. Anyone have any idea of what kind of problem this is? > > > > Best Regards/ Peter Carlstedt > > > From: freeradius-users-request(a)lists.freeradius.org > > Subject: Freeradius-Users Digest, Vol 55, Issue 24 > > To: freeradius-users(a)lists.freeradius.org > > Date: Fri, 6 Nov 2009 14:47:51 +0100 > > > > Send Freeradius-Users mailing list submissions to > > freeradius-users(a)lists.freeradius.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.freeradius.org/mailman/listinfo/freeradius-users > > or, via email, send a message with subject or body 'help' to > > freeradius-users-request(a)lists.freeradius.org > > > > You can reach the person managing the list at > > freeradius-users-owner(a)lists.freeradius.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Freeradius-Users digest..." > > > > > > Today's Topics: > > > > 1. Re: Upgrade From 1 to 2 - problem with authorize (Bj?rn Mork) > > 2. Re: FreeRADIUS + Postgresql dies unexpectedly (Alan DeKok) > > 3. Re: How to stop radiusd (Chico Sokol) > > 4. Re: Can't compile FreeRADIUS with pam module (Alan DeKok) > > 5. Re: How to stop radiusd (Rakotomandimby Mihamina) > > 6. Re: How to stop radiusd (Alan DeKok) > > 7. Re: Alcatel-Lucent Service Router dictionary (Alan DeKok) > > 8. Re: Can't compile FreeRADIUS with pam module (Chico Sokol) > > 9. Re: Can't compile FreeRADIUS with pam module (John Dennis) > > 10. Re: Can't compile FreeRADIUS with pam module (Alan DeKok) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Fri, 06 Nov 2009 14:16:58 +0100 > > From: Bj?rn Mork <bjorn(a)mork.no> > > Subject: Re: Upgrade From 1 to 2 - problem with authorize > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: <87y6mjaj3p.fsf(a)nemi.mork.no> > > Content-Type: text/plain; charset=utf-8 > > > > Robert White <rwhite(a)globalgossip.net> writes: > > > > > What's the difference? > > > > > > Tbh, I don't even understand the what group queries are. Documentation > > > seems to be kind of lacking. Not your fault I know, but I don't want you to > > > think I haven't tried finding this out for myself! > > > > > > I've attached my sql.conf and dialup.conf files. > > > > I believe you need a group_membership_query as well in 2.x, although I > > do notice that the mssql/dialup.conf example doesn't have one. That > > must be an error. Feel free to fix it if you get this working. > > > > rlm_sql_process_groups() will process the group list returned by > > sql_get_grouplist() and that won't be any unless you configure a > > group_membership_query: > > > > group_list_tmp = *group_list = NULL; > > > > if (!inst->config->groupmemb_query || > > (inst->config->groupmemb_query[0] == 0)) > > return 0; > > > > > > The other dialup.conf examples will tell you how it is supposed to look. > > It is a very simple query, so I assume you can convert this to mssql > > easily: > > > > group_membership_query = "SELECT groupname \ > > FROM ${usergroup_table} \ > > WHERE username = '%{SQL-User-Name}' \ > > ORDER BY priority" > > > > > > > > Bj?rn > > > > > > > > ------------------------------ > > > > Message: 2 > > Date: Fri, 06 Nov 2009 08:18:01 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > Subject: Re: FreeRADIUS + Postgresql dies unexpectedly > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: <4AF42209.5000203(a)deployingradius.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > Duarte Fonseca wrote: > > > Hi list, > > > > > > Just checking if anyone has any more suggestions on how I should > > > proceed with this. > > > > A fix is in the "stable" branch of git. > > > > Alan DeKok. > > > > > > ------------------------------ > > > > Message: 3 > > Date: Fri, 6 Nov 2009 14:18:10 +0100 > > From: Chico Sokol <chico.sokol(a)gmail.com> > > Subject: Re: How to stop radiusd > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: > > <b7475cbf0911060518n4ad25cd8i4dc9bd8c0895bfa4(a)mail.gmail.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > Hy, > > Try something like: > > # locate -u / > > # locate raddb > > > > This will return the freeradius configuration folder. I believe it > > will be something like /usr/local/etc/raddb. If that's the case, the > > binaries will be at /usr/local/bin and /usr/local/sbin. > > > > regards, > > > > On Fri, Nov 6, 2009 at 2:04 PM, Peter Carlstedt <pc_007(a)hotmail.com> wrote: > > > Hello all. > > > > > > Me and my friend is sitting at the computer trying to get Freeradius to > > > work. > > > After testing Ubuntus own release of FreeRadius which is verison 2.1.0 we > > > decided to download 2.1.7 from the freeradius site. > > > > > > We downloaded the freeradius into the Desktop of the user and then followed > > > theinstructions for compiling. > > > > > > (sudo ./configure > > > sudo make > > > sudo make install) > > > > > > Now when we want to stop radiusd we cant find the folder which it has > > > installed freeradius into. > > > If you know how if works and where we could find the installed freeradius > > > folder it would be much appreciated. > > > > > > Best regards/ Peter Carlstedt > > > > > > ________________________________ > > > Windows Live Hotmail: Your friends can get your Facebook updates, right from > > > Hotmail?. > > > - > > > List info/subscribe/unsubscribe? See > > > http://www.freeradius.org/list/users.html > > > > > > > > > > > -- > > Chico Sokol > > > > > > > > ------------------------------ > > > > Message: 4 > > Date: Fri, 06 Nov 2009 08:18:59 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > Subject: Re: Can't compile FreeRADIUS with pam module > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: <4AF42243.9010807(a)deployingradius.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > Chico Sokol wrote: > > > Hy guys, > > > I'm using version 2.1.7. And I'm having trouble at building freeradius > > > from de source with pam module (rlm_pam). Here's what I'm doing: > > > > > > # ./configure --with-modules=rlm_pam > > > # make > > > > > > Then I get the following error, during the pam module compilation: > > > > > > rlm_pam.c:123: warning: 'struct pam_response' declared inside > > > parameter list > > > > You don't have the PAM development header files installed. You will > > need to figure out where they are (which package, etc.), and install them. > > > > Alan DeKok. > > > > > > ------------------------------ > > > > Message: 5 > > Date: Fri, 06 Nov 2009 16:19:43 +0300 > > From: Rakotomandimby Mihamina <mihamina(a)gulfsat.mg> > > Subject: Re: How to stop radiusd > > To: freeradius-users(a)lists.freeradius.org > > Message-ID: <4AF4226F.20704(a)gulfsat.mg> > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > > > 11/06/2009 04:04 PM, Peter Carlstedt:: > > > (sudo ./configure > > > sudo make > > > sudo make install) > > > > > > Now when we want to stop radiusd we cant find the folder which it has > > > installed freeradius into. > > > > You blindly typed those commands in, then. > > > > > If you know how if works and where we could find the installed > > > freeradius folder it would be much appreciated. > > > > The install directory has been setup during the ./configure. > > type "./configure --help". > > > > PS: Why didn't you stay with the Ubuntu Freeradius? We choosed not to stay with the Ubuntu Freeradius 2.1.0 since we read somewhere that it wont work with OpenSSL and that we need to make our own build to get it to work. It was something about that it hasnt the support for OpenSSL since it is licensed? > > > > -- > > Architecte Informatique chez Blueline/Gulfsat: > > Administration Systeme, Recherche & Developpement > > +261 33 11 207 36 > > > > > > ------------------------------ > > > > Message: 6 > > Date: Fri, 06 Nov 2009 08:21:44 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > Subject: Re: How to stop radiusd > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: <4AF422E8.3050904(a)deployingradius.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > Peter Carlstedt wrote: > > > Now when we want to stop radiusd we cant find the folder which it has > > > installed freeradius into. > > > > The default installation directory can be found by: > > > > ./configure --help > > > > Or, by reading the output of "make install". It shows you what it is > > installing, and where those files are installed. > > > > Alan DeKok. > > > > > > ------------------------------ > > > > Message: 7 > > Date: Fri, 06 Nov 2009 08:22:27 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > Subject: Re: Alcatel-Lucent Service Router dictionary > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: <4AF42313.2040800(a)deployingradius.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > Peter Lambrechtsen wrote: > > > Hello > > > > > > It took me some time to track down this dictionary so I thought for > > > completeness that it may want to get included into the freeradius > > > dictionary directory. > > > > Added, thanks. > > > > Alan DeKok. > > > > > > > > ------------------------------ > > > > Message: 8 > > Date: Fri, 6 Nov 2009 14:30:22 +0100 > > From: Chico Sokol <chico.sokol(a)gmail.com> > > Subject: Re: Can't compile FreeRADIUS with pam module > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: > > <b7475cbf0911060530o76e6ca50g25d3a25e1490963b(a)mail.gmail.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > Hum... I need development header files? I have pam installed, and the > > header files does exist at /usr/include/pam: > > > > -rw-r--r-- 1 root root 2972 2009-10-29 18:58 _pam_compat.h > > -rw-r--r-- 1 root root 6101 2009-10-29 18:58 _pam_macros.h > > -rw-r--r-- 1 root root 12837 2009-10-29 18:58 _pam_types.h > > -rw-r--r-- 1 root root 3297 2009-11-06 10:15 pam_appl.h > > -rw-r--r-- 1 root root 7203 2009-10-29 18:58 pam_client.h > > -rw-r--r-- 1 root root 3251 2009-10-29 18:58 pam_ext.h > > -rw-r--r-- 1 root root 1140 2009-10-29 18:58 pam_filter.h > > -rw-r--r-- 1 root root 1577 2009-10-29 18:58 pam_misc.h > > -rw-r--r-- 1 root root 6432 2009-10-29 18:58 pam_modules.h > > -rw-r--r-- 1 root root 4076 2009-10-29 18:58 pam_modutil.h > > > > Thanks, > > > > On Fri, Nov 6, 2009 at 2:18 PM, Alan DeKok <aland(a)deployingradius.com> wrote: > > > Chico Sokol wrote: > > >> Hy guys, > > >> I'm using version 2.1.7. And I'm having trouble at building freeradius > > >> from de source with pam module (rlm_pam). Here's what I'm doing: > > >> > > >> # ./configure --with-modules=rlm_pam > > >> # make > > >> > > >> Then I get the following error, during the pam module compilation: > > >> > > >> rlm_pam.c:123: warning: 'struct pam_response' declared inside > > >> parameter list > > > > > > ?You don't have the PAM development header files installed. ?You will > > > need to figure out where they are (which package, etc.), and install them. > > > > > > ?Alan DeKok. > > > - > > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > > > > > > > > -- > > Chico Sokol > > > > > > > > ------------------------------ > > > > Message: 9 > > Date: Fri, 06 Nov 2009 08:44:42 -0500 > > From: John Dennis <jdennis(a)redhat.com> > > Subject: Re: Can't compile FreeRADIUS with pam module > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: <4AF4284A.5040807(a)redhat.com> > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > > > On 11/06/2009 08:30 AM, Chico Sokol wrote: > > > Hum... I need development header files? I have pam installed, and the > > > header files does exist at /usr/include/pam: > > > > Did you install these *after* running configure? If so you'll have to > > run configure again so it can find them and set the right compiler flags. > > > > -- > > John Dennis <jdennis(a)redhat.com> > > > > Looking to carve out IT costs? > > www.redhat.com/carveoutcosts/ > > > > > > ------------------------------ > > > > Message: 10 > > Date: Fri, 06 Nov 2009 08:47:37 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > Subject: Re: Can't compile FreeRADIUS with pam module > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Message-ID: <4AF428F9.8010307(a)deployingradius.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > Chico Sokol wrote: > > > Hum... I need development header files? I have pam installed, and the > > > header files does exist at /usr/include/pam: > > > > <shrug> Then the PAM module and header files are no longer > > compatible. I don't use PAM, so I'm not really sure what the underlying > > issue is. > > > > Alan DeKok. > > > > > > ------------------------------ > > > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > > > End of Freeradius-Users Digest, Vol 55, Issue 24 > > ************************************************ > > _________________________________________________________________ > Windows Live Hotmail: Your friends can get your Facebook updates, right from Hotmail?. > http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/so… >

2 1

RE: Freeradius-Users Digest, Vol 55, Issue 24
by Peter Carlstedt 06 Nov '09

06 Nov '09

Hi all, I found the folder where clients.conf and so on where installed. Now I obviusly got another error. I will step by step explain what I´ve done. 1. Downloaded FreeRadius 2.1.7 2. Went into the terminel and extracted the tar.gz file of FreeRadius onto the home/name/Desktop 3. Made my way into the newly extracted folder cd /home/peter/Desktop/FreeRadius-2.7.1 4. Jumped into the folder called "Debian" and checked if the files "control" and "rules" had the lines which enables SSL so I can use PEAP. 5. Went back one step back to the main folder of FreeRadius (/home/peter/Desktop/FreeRadius-2.7.1/ 6. wrote in terminal "./configure" 7. wrote in terminal "make" 8. wrote in terminal "sudo make install" Before all this I made sure that OpenSSL was installed together with libssl-dev and libpq-dev. Then after the installation was finished I wrote "sudo radiusd -X" and got an error message after it tried to load "clients.conf" which said "Segmentation fault". I have tried to find anything on the net about it but cannot find any information which helps me with this problem. Anyone have any idea of what kind of problem this is? Best Regards/ Peter Carlstedt > From: freeradius-users-request(a)lists.freeradius.org > Subject: Freeradius-Users Digest, Vol 55, Issue 24 > To: freeradius-users(a)lists.freeradius.org > Date: Fri, 6 Nov 2009 14:47:51 +0100 > > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: Upgrade From 1 to 2 - problem with authorize (Bj?rn Mork) > 2. Re: FreeRADIUS + Postgresql dies unexpectedly (Alan DeKok) > 3. Re: How to stop radiusd (Chico Sokol) > 4. Re: Can't compile FreeRADIUS with pam module (Alan DeKok) > 5. Re: How to stop radiusd (Rakotomandimby Mihamina) > 6. Re: How to stop radiusd (Alan DeKok) > 7. Re: Alcatel-Lucent Service Router dictionary (Alan DeKok) > 8. Re: Can't compile FreeRADIUS with pam module (Chico Sokol) > 9. Re: Can't compile FreeRADIUS with pam module (John Dennis) > 10. Re: Can't compile FreeRADIUS with pam module (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 06 Nov 2009 14:16:58 +0100 > From: Bj?rn Mork <bjorn(a)mork.no> > Subject: Re: Upgrade From 1 to 2 - problem with authorize > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <87y6mjaj3p.fsf(a)nemi.mork.no> > Content-Type: text/plain; charset=utf-8 > > Robert White <rwhite(a)globalgossip.net> writes: > > > What's the difference? > > > > Tbh, I don't even understand the what group queries are. Documentation > > seems to be kind of lacking. Not your fault I know, but I don't want you to > > think I haven't tried finding this out for myself! > > > > I've attached my sql.conf and dialup.conf files. > > I believe you need a group_membership_query as well in 2.x, although I > do notice that the mssql/dialup.conf example doesn't have one. That > must be an error. Feel free to fix it if you get this working. > > rlm_sql_process_groups() will process the group list returned by > sql_get_grouplist() and that won't be any unless you configure a > group_membership_query: > > group_list_tmp = *group_list = NULL; > > if (!inst->config->groupmemb_query || > (inst->config->groupmemb_query[0] == 0)) > return 0; > > > The other dialup.conf examples will tell you how it is supposed to look. > It is a very simple query, so I assume you can convert this to mssql > easily: > > group_membership_query = "SELECT groupname \ > FROM ${usergroup_table} \ > WHERE username = '%{SQL-User-Name}' \ > ORDER BY priority" > > > > Bj?rn > > > > ------------------------------ > > Message: 2 > Date: Fri, 06 Nov 2009 08:18:01 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > Subject: Re: FreeRADIUS + Postgresql dies unexpectedly > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <4AF42209.5000203(a)deployingradius.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Duarte Fonseca wrote: > > Hi list, > > > > Just checking if anyone has any more suggestions on how I should > > proceed with this. > > A fix is in the "stable" branch of git. > > Alan DeKok. > > > ------------------------------ > > Message: 3 > Date: Fri, 6 Nov 2009 14:18:10 +0100 > From: Chico Sokol <chico.sokol(a)gmail.com> > Subject: Re: How to stop radiusd > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <b7475cbf0911060518n4ad25cd8i4dc9bd8c0895bfa4(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Hy, > Try something like: > # locate -u / > # locate raddb > > This will return the freeradius configuration folder. I believe it > will be something like /usr/local/etc/raddb. If that's the case, the > binaries will be at /usr/local/bin and /usr/local/sbin. > > regards, > > On Fri, Nov 6, 2009 at 2:04 PM, Peter Carlstedt <pc_007(a)hotmail.com> wrote: > > Hello all. > > > > Me and my friend is sitting at the computer trying to get Freeradius to > > work. > > After testing Ubuntus own release of FreeRadius which is verison 2.1.0 we > > decided to download 2.1.7 from the freeradius site. > > > > We downloaded the freeradius into the Desktop of the user and then followed > > theinstructions for compiling. > > > > (sudo ./configure > > sudo make > > sudo make install) > > > > Now when we want to stop radiusd we cant find the folder which it has > > installed freeradius into. > > If you know how if works and where we could find the installed freeradius > > folder it would be much appreciated. > > > > Best regards/ Peter Carlstedt > > > > ________________________________ > > Windows Live Hotmail: Your friends can get your Facebook updates, right from > > Hotmail?. > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > > > -- > Chico Sokol > > > > ------------------------------ > > Message: 4 > Date: Fri, 06 Nov 2009 08:18:59 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > Subject: Re: Can't compile FreeRADIUS with pam module > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <4AF42243.9010807(a)deployingradius.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Chico Sokol wrote: > > Hy guys, > > I'm using version 2.1.7. And I'm having trouble at building freeradius > > from de source with pam module (rlm_pam). Here's what I'm doing: > > > > # ./configure --with-modules=rlm_pam > > # make > > > > Then I get the following error, during the pam module compilation: > > > > rlm_pam.c:123: warning: 'struct pam_response' declared inside > > parameter list > > You don't have the PAM development header files installed. You will > need to figure out where they are (which package, etc.), and install them. > > Alan DeKok. > > > ------------------------------ > > Message: 5 > Date: Fri, 06 Nov 2009 16:19:43 +0300 > From: Rakotomandimby Mihamina <mihamina(a)gulfsat.mg> > Subject: Re: How to stop radiusd > To: freeradius-users(a)lists.freeradius.org > Message-ID: <4AF4226F.20704(a)gulfsat.mg> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > 11/06/2009 04:04 PM, Peter Carlstedt:: > > (sudo ./configure > > sudo make > > sudo make install) > > > > Now when we want to stop radiusd we cant find the folder which it has > > installed freeradius into. > > You blindly typed those commands in, then. > > > If you know how if works and where we could find the installed > > freeradius folder it would be much appreciated. > > The install directory has been setup during the ./configure. > type "./configure --help". > > PS: Why didn't you stay with the Ubuntu Freeradius? > > -- > Architecte Informatique chez Blueline/Gulfsat: > Administration Systeme, Recherche & Developpement > +261 33 11 207 36 > > > ------------------------------ > > Message: 6 > Date: Fri, 06 Nov 2009 08:21:44 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > Subject: Re: How to stop radiusd > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <4AF422E8.3050904(a)deployingradius.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Peter Carlstedt wrote: > > Now when we want to stop radiusd we cant find the folder which it has > > installed freeradius into. > > The default installation directory can be found by: > > ./configure --help > > Or, by reading the output of "make install". It shows you what it is > installing, and where those files are installed. > > Alan DeKok. > > > ------------------------------ > > Message: 7 > Date: Fri, 06 Nov 2009 08:22:27 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > Subject: Re: Alcatel-Lucent Service Router dictionary > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <4AF42313.2040800(a)deployingradius.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Peter Lambrechtsen wrote: > > Hello > > > > It took me some time to track down this dictionary so I thought for > > completeness that it may want to get included into the freeradius > > dictionary directory. > > Added, thanks. > > Alan DeKok. > > > > ------------------------------ > > Message: 8 > Date: Fri, 6 Nov 2009 14:30:22 +0100 > From: Chico Sokol <chico.sokol(a)gmail.com> > Subject: Re: Can't compile FreeRADIUS with pam module > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <b7475cbf0911060530o76e6ca50g25d3a25e1490963b(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Hum... I need development header files? I have pam installed, and the > header files does exist at /usr/include/pam: > > -rw-r--r-- 1 root root 2972 2009-10-29 18:58 _pam_compat.h > -rw-r--r-- 1 root root 6101 2009-10-29 18:58 _pam_macros.h > -rw-r--r-- 1 root root 12837 2009-10-29 18:58 _pam_types.h > -rw-r--r-- 1 root root 3297 2009-11-06 10:15 pam_appl.h > -rw-r--r-- 1 root root 7203 2009-10-29 18:58 pam_client.h > -rw-r--r-- 1 root root 3251 2009-10-29 18:58 pam_ext.h > -rw-r--r-- 1 root root 1140 2009-10-29 18:58 pam_filter.h > -rw-r--r-- 1 root root 1577 2009-10-29 18:58 pam_misc.h > -rw-r--r-- 1 root root 6432 2009-10-29 18:58 pam_modules.h > -rw-r--r-- 1 root root 4076 2009-10-29 18:58 pam_modutil.h > > Thanks, > > On Fri, Nov 6, 2009 at 2:18 PM, Alan DeKok <aland(a)deployingradius.com> wrote: > > Chico Sokol wrote: > >> Hy guys, > >> I'm using version 2.1.7. And I'm having trouble at building freeradius > >> from de source with pam module (rlm_pam). Here's what I'm doing: > >> > >> # ./configure --with-modules=rlm_pam > >> # make > >> > >> Then I get the following error, during the pam module compilation: > >> > >> rlm_pam.c:123: warning: 'struct pam_response' declared inside > >> parameter list > > > > ?You don't have the PAM development header files installed. ?You will > > need to figure out where they are (which package, etc.), and install them. > > > > ?Alan DeKok. > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > > > -- > Chico Sokol > > > > ------------------------------ > > Message: 9 > Date: Fri, 06 Nov 2009 08:44:42 -0500 > From: John Dennis <jdennis(a)redhat.com> > Subject: Re: Can't compile FreeRADIUS with pam module > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <4AF4284A.5040807(a)redhat.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > On 11/06/2009 08:30 AM, Chico Sokol wrote: > > Hum... I need development header files? I have pam installed, and the > > header files does exist at /usr/include/pam: > > Did you install these *after* running configure? If so you'll have to > run configure again so it can find them and set the right compiler flags. > > -- > John Dennis <jdennis(a)redhat.com> > > Looking to carve out IT costs? > www.redhat.com/carveoutcosts/ > > > ------------------------------ > > Message: 10 > Date: Fri, 06 Nov 2009 08:47:37 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > Subject: Re: Can't compile FreeRADIUS with pam module > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <4AF428F9.8010307(a)deployingradius.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Chico Sokol wrote: > > Hum... I need development header files? I have pam installed, and the > > header files does exist at /usr/include/pam: > > <shrug> Then the PAM module and header files are no longer > compatible. I don't use PAM, so I'm not really sure what the underlying > issue is. > > Alan DeKok. > > > ------------------------------ > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > End of Freeradius-Users Digest, Vol 55, Issue 24 > ************************************************ _________________________________________________________________ Windows Live Hotmail: Your friends can get your Facebook updates, right from Hotmail®. http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/so…

2 1

Question about Real Dinamics Ldap Groups
by Alejandro Escanero Blanco 06 Nov '09

06 Nov '09

Is this possible? My Case: I have a ldap group called cn=mygroup,o=myorg,c=mycountry A user: cn=myuser,o=myorg,c=mycountry The configuration for ldap have: groupname_attribute = cn groupmembership_filter = "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name:-%{User-Name}}))" groupmembership_attribute = radiusGroupName An the user file have: DEFAULT Ldap-Group == mygroup Tunnel-Medium-Type = IEEE-802, Tunnel-Type = VLAN, Tunnel-Private-Group-Id = 1, Fall-Through = No Everything is going ok, but i want more and begin to test: DEFAULT Ldap-Group == mygroup Tunnel-Medium-Type = IEEE-802, Tunnel-Type = VLAN, Tunnel-Private-Group-Id = `%{ldap:ldap:///cn=mygroup,o=myorg,c=mycountry?radiusTunnelPrivateGroupId?base?memberUid=%{Stripped-User-Name}}`, Fall-Through = No Adding the radiusProfile Object to the posixGroup, and put the attribute radiusTunnelPrivateGroupId as 1. Going ok But i want to manage all from ldap and this configuration fail because radius can't get the ldap group list and don't check the groups. DEFAULT Ldap-Group == * Tunnel-Medium-Type = IEEE-802, Tunnel-Type = VLAN, Tunnel-Private-Group-Id = `%{ldap:ldap:///cn=%{Ldap-Group},o=myorg,c=mycountry?radiusTunnelPrivateGroupId?base?memberUid=%{Stripped-User-Name}}`, Fall-Through = No There are any solution to fully manage the groups from ldap? Thanks. -- ------------------------- Alejandro Escanero Blanco Secretaría General Técnica - Servicio de Informática Sistemas Tel: 671 569 262 (769262) Consejería de Innovación, Ciencia y Empresa Junta de Andalucía

1 0

Alcatel-Lucent Service Router dictionary
by Peter Lambrechtsen 06 Nov '09

06 Nov '09

Hello It took me some time to track down this dictionary so I thought for completeness that it may want to get included into the freeradius dictionary directory. It's a carrier grade product so not all that common, but it may help someone else having this included. Many thanks Peter

2 1

Authentication Failure and User Attributes
by Bob Brandt 06 Nov '09

06 Nov '09

I have a little problem that I would like to fix: My setup right now works great, however there is only little problem, even if the user is rejected (i.e. incorrect password) all the user attributes are still returned. I think this is a slight security risk, since all you need to know is the username to retrieve information about the network... I am trying to stop this but placing an entry at the top of the users file, but I can not figure out what variable to test for? Any ideas? Where would I look? Thanks Bob

3 2

Help with freeradius
by Felipe Silva 05 Nov '09

05 Nov '09

Help please, im trying to authenticate freeradius by doing a search on ldap and using the sambaNtpassword and then authenticate with ms-chap to provide wireless internet. here is the log: FreeRADIUS Version 2.1.7, for host i386-redhat-linux-gnu, built on Sep 15 2009 at 11:31:29 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including configuration file /etc/raddb/eap.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 150.164.0.0/16 { require_message_authenticator = no secret = "testando" shortname = "ufmg" } client 127.0.0.1 { require_message_authenticator = no secret = "testando" shortname = "ufmg" } radiusd: #### Instantiating modules #### radiusd: #### Loading Virtual Servers #### server { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = no } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_ldap Module: Instantiating ldapgrude ldap ldapgrude { server = "1xx.1xx.xxx.xxx" port = 389 password = "ldapPassword" identity = "cn=voipuser,dc=ufmg,dc=br" net_timeout = 10 timeout = 40 timelimit = 30 tls_mode = no start_tls = no tls_require_cert = "allow" basedn = "ou=people,dc=ufmg,dc=br" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectClass=sambaSAMAccount)" auto_header = no access_attr = "uid" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldapgrude-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldapgrude-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldapgrude rlm_ldap: Over-riding set_auth_type, as there is no module ldapgrude listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP userPassword mapped to RADIUS User_Password rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x8637058 } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 40380, id=170, length=69 User-Name = "uset" User-Password = "testpasswd" NAS-IP-Address = 1xx.1xx.xxx.xxx NAS-Port = 1 +- entering group authorize {...} ++[mschap] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [ldapgrude] performing user authorization for testUser [ldapgrude] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldapgrude] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=testUser) [ldapgrude] expand: ou=people,dc=ufmg,dc=br -> ou=people,dc=ufmg,dc=br rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 1xx.1xx.xxx.xxx:389, authentication 0 rlm_ldap: bind as cn=voipuser,dc=ufmg,dc=br/ldapPassword to 1xx.1xx.xxx.xxx:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=people,dc=ufmg,dc=br, with filter (uid=testUser) [ldapgrude] checking if remote access for testUser is allowed by uid [ldapgrude] looking for check items in directory... rlm_ldap: sambaAcctFlags -> SMB-Account-CTRL-TEXT == "[U ]" rlm_ldap: sambaNTPassword -> NT-Password == 0x9257394245343632414133453337354130387042433837323324653032453235 rlm_ldap: sambaLMPassword -> LM-Password == 0x5678394543313346423331393843423049813244424243383541313445413244 [ldapgrude] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldapgrude] user testUser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldapgrude] returns ok No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Failed to authenticate the user. Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 170 to 127.0.0.1 port 40380 Waking up in 4.9 seconds. ____________________________________________________________________________________ Veja quais são os assuntos do momento no Yahoo! +Buscados http://br.maisbuscados.yahoo.com

2 1

regex 'fun'
by Alexander Clouter 05 Nov '09

05 Nov '09

Hi, Whilst trawling my logs to see what new interesting ways in which our userbase has gone and borked their workstations, I noticed that we are proxying realms upstream (to eduroam) that we should not be.....in this case it seems to be realms with spaces in them. If anyone reads the guff I dump out onto this mailing list you might have stumbled onto a policy definition I use to catch completely broken realms: ---- # only needs to be close enough to catch unroutable guff validate_username { if (User-Name !~ /@/ \ || ( \ User-Name !~ /@.*@/ \ && User-Name =~ /^[[:graph:]]*@([-[:alnum:]]+\.)+[[:alpha:]]{2,}$/ \ ) \ ) { ok } else { update reply { Reply-Message := "Invalid User-Name Syntax" } reject } } ---- This pretty such deals with 'double' realms, and badly formed usernames (the NULL realm condition is blocked elsewhere). It is then used as so: ---- authorize { preprocess rewrite.called_station_id <---- sanitiser rewrite.calling_station_id <---- sanitiser rewrite.quirk.wlc <---- sanitiser validate_username suffix .... } ---- The sanitising entries to not touch the User-Name field at all. Now if I fake some of the cruft I see I get: ---- rad_recv: Access-Request packet from host 172.31.3.41 port 1645, id=85, length=242 User-Name = "dsadadasda@Globalsign Root CA" Service-Type = Framed-User Framed-MTU = 1500 Called-Station-Id = "00-19-30-78-60-A5" Calling-Station-Id = "00-12-3F-E5-55-3C" EAP-Message = 0x02010022016473616461646173646140476c6f62616c7369676e20526f6f74204341 Message-Authenticator = 0x1f4ef372e5c3cb6ab4c2354ac9ce36d0 Cisco-AVPair = "audit-session-id=AC1F04BD000019806FAB0F27" NAS-Port-Type = Ethernet NAS-Port = 50133 NAS-Port-Id = "FastEthernet1/0/33" NAS-IP-Address = 172.31.3.41 server dot1x { +- entering group authorize {...} ++[preprocess] returns ok ++- entering policy rewrite.called_station_id {...} [RFCise the Called-Station-ID] ++- policy rewrite.called_station_id returns ok ++- entering policy rewrite.calling_station_id {...} [RFCise the Calling-Station-ID] ++- policy rewrite.calling_station_id returns ok ++- entering policy rewrite.quirk.wlc {...} [RFCise the crap Cisco's WLC 4400 returns] ++- policy rewrite.quirk.wlc returns noop ++- entering policy validate_username {...} +++? if (User-Name !~ /@/ || ( User-Name !~ /@.*@/ && User-Name =~ /^[[:graph:]]*@([-[:alnum:]]+\.)+[[:alpha:]]{2,}$/ ) ) ? Evaluating (User-Name !~ /@/) -> FALSE ?? Evaluating (User-Name !~ /@.*@/) -> TRUE ?? Evaluating (User-Name =~ /^[[:graph:]]*@([-[:alnum:]]+\.)+[[:alpha:]]{2,}$/) -> TRUE +++? if (User-Name !~ /@/ || ( User-Name !~ /@.*@/ && User-Name =~ /^[[:graph:]]*@([-[:alnum:]]+\.)+[[:alpha:]]{2,}$/ ) ) -> TRUE +++- entering if (User-Name !~ /@/ || ( User-Name !~ /@.*@/ && User-Name =~ /^[[:graph:]]*@([-[:alnum:]]+\.)+[[:alpha:]]{2,}$/ ) ) {...} ++++[ok] returns ok +++- if (User-Name !~ /@/ || ( User-Name !~ /@.*@/ && User-Name =~ /^[[:graph:]]*@([-[:alnum:]]+\.)+[[:alpha:]]{2,}$/ ) ) returns ok +++ ... skipping else for request 103: Preceding "if" was taken ++- policy validate_username returns ok [suffix] Looking up realm "Globalsign Root CA" for User-Name = "dsadadasda@Globalsign Root CA" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user dsadadasda to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ---- Okay, maybe my regex is bad...so I tested it: ---- alex@berk:~$ cat moo xwFMNc02QnAbZlQ9wI9tiG(a)GlobalSignRootCA.test xwFMNc02QnAbZlQ9wI9tiG@GlobalSign Root CA wobble(a)example.com wibble(a)example.co.uk alex@berk:~$ grep '[[:graph:]]*@$[-[:alnum:]]\+\.$\+[[:alpha:]]\{2,\}' moo xwFMNc02QnAbZlQ9wI9tiG(a)GlobalSignRootCA.test wobble(a)example.com wibble(a)example.co.uk ---- Any ideas? Bug? Feature? Cheers -- Alexander Clouter .sigmonster says: They're only trying to make me LOOK paranoid!

4 14