April 2009 - Freeradius-Users - lists.freeradius.org

(EAP) AES Key-wrap of MK issued to the authenticator
by William Rettig 15 Apr '09

15 Apr '09

Please point me to documentation that shows how to set up "AES Key-wrap of the MK issued to the authenticator". I am trying to support FIPS140-2. Is this possible? Thank you, Bill

1 0

problem with samba and kerberos 5 to integrate freeradius with AD
by bastardinho69 15 Apr '09

15 Apr '09

Hi, i have been following this great guide http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWTO on how to integrate freeradius with AD. I am getting confused about kerberos5. Do i have to additionally install krb5 from ports? Or maybe it should be on my system already after samba server installation? In any way (install krb5 or no, i tried both ways) i dont have the krb5.conf file on my system at all. Judging from the guide, it should be there without any krb5 installation procedure. I am running FreeBSD 7.1. I hope u guys can help me, becoz it feels like "no way out" at the moment. Thanks for ur time ;)

1 0

Determining which module caused a reject
by Jack Smith 15 Apr '09

15 Apr '09

Hi I am running freeradius 2.1.4. Alan has mentioned that unlang logic should be restricted to Post-Auth (afterall, that is what it is there for). In order for me to do this, I need to know in the Post-Auth-Type REJECT which module caused the reject. Currently, I can do this in the authentication section quite easily: authenticate { Auth-Type PAP { pap { ok = return reject = 1 } if (reject) { update reply { Reply-Message := "Incorrect password for %{User-Name}" } } } Auth-Type CHAP { chap { ok = return reject = 1 } if (reject) { update reply { Reply-Message := "Incorrect password for %{User-Name}" } } } } But as I said, I would like to move this logic to the Post-Auth-Type Reject. It is not only Auth-Type PAP or CHAP which can cause a reject, my SQL module can also cause a reject. Hence I cannot use the following logic (lets assume we used PAP authentication) in the Post-Auth-Type REJECT: Post-Auth-Type REJECT { if (pap) { } } The reason why I cannot use the above is because in the scenario when a user is successfully authenticated using PAP, but the SQL module rejects him (lets say due to lack of credit), the above if statement will evaluate to true. To summarise once again: How can I obtain which module caused the reject in the Post-Auth-Type REJECT? Thanks in advance

1 0

Re: Re: rlm_perl behavior
by Borislav Dimitrov 15 Apr '09

15 Apr '09

Hello, I just subscribed so I won't be able to quote properly but I hope at least the message is associated with the right thread (I found it on the web archive of the mailing list). I've been using FreeRADIUS for about 4 year now and it is a wonderful product - there's no question why you're No 1! For the past years of using and developing rlm_perl modules for FreeRADIUS, I've only been astonished and happy because of the new functionalities etc that the development team have been adding to the new releases. This all ended with this crippling of the rlm_perl module in the new 2.1.4 release (btw I downloaded and compiled from source the 2.1.4 release under CentOS 5.2, but radiusd - v says that the version is 2.1.5...). Here are my thoughts on the matter and quotes of the discussion for clarity: > Apostolos Pantsiopoulos wrote: >> I noticed that the following directives : > ... >> for perl were not present in the file after the compiling. >> >> Are these directives obsolete? > > Yes. The server already has a thread management system. Adding > another one for Perl is unnecessary. Removing something which has been working fine (the rlm_perl thread management system) is not a good thing IMHO. It helped me achieve more flexibility and was really powerful. > Apostolos Pantsiopoulos wrote: > > Does this mean that in the new behavior I have one perl instance > > (thread) shared by all the radius threads? And if so, are all the > radius > > requests being processed sequentially by it? Doesn't this degrade > > the performance? > > Possibly, yes. > > > Or, the module could be updated to have one > >> perl interpreter per child thread. > > > > This requires that I alter the rlm_perl module code, right? > > Yes. Having only one perl instance will have very bad influence on performance in large integrations. I've experienced what happens in this case - the CPU usage of radiusd is very low (<1%) but requests are waiting each other to finish. This causes huge delays (I've seen 2-3 minutes!) and flooding the NAS's logs with RADIUS Server DEAD... RADIUS Server Alive messages. I've been happily using multiple perl instances to achieve the functionality that I need (like Apostolos Pantsiopoulos) for years now. In my case, I created several rlm_perl instances, each loading different perl applications to take care of different cases depending on the NAS-IP like this: perl instance1 { # This is a large branch => I put higher values for max_clones, start_clones etc but keeping the pool static to avoid reloading the settings from the DB on module instantiation } perl instance2 { # This is another (slightly modified) script which takes care of special circumstances } # ... and now using the wonderful ulang functionality I do the following in ... say accounting switch "%{NAS-IP-Address}" { case '10.250.15.1' { instance1 } case '10.250.17.192' { instance2 } } As far as I could understand from my brief research with google and reading the mailing list, achieving this is now impossible. And I discover this amidst integration. Correct me if I'm wrong, but I'm left with the impression that doing such configurations now requires modifying the rlm_perl's code etc which is not an option. This leaves me with the options to downgrade the FreeRADIUS version or shoot myself in the head ;-). Anyways IMHO this 2.1.4 release is a huge step back. I certainly don't want to insult anyone but why remove functionality which has been working fine for years forcing people rewrite their code (amidst started integrations and projects) to support the new versions limitations! P.S.: Sorry for sending the previous unfinished message, I pressed the wrong key combination

1 0

about sqlippool
by Tseveendorj 15 Apr '09

15 Apr '09

Hello, I got it. I defined Pool-Name attribute in wrong place. Tseveen.

1 0

About sqlippool
by Tseveendorj 15 Apr '09

15 Apr '09

Hello, Sorry for ask newbie question. I would like to implement sqlippool functionality on FreeRADIUS 2.1.3. I read /usr/local/share/doc/freeradius/rlm_sqlippool there has following note "IP-Pool Attribute (Keep in mind that its a **CHECK** item, not reply)" I didn't understand. which attribute (IP-Pool or Pool-Name) needed for sqlippool? and I also defined sqlippool in accounting { ...} and post-auth {...} directive. But pool didn't work. You can see more detailed below. Thanks for any help. accounting { # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily # Update the wtmp file # # If you don't use "radlast", you can delete this line. #unix # # Log traffic to an SQL database. # # See "Accounting queries" in sql.conf sql *sqlippool* # # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. radutmp # sradutmp # Return an address to the IP Pool when we see a stop record. # main_pool # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # Cisco VoIP specific bulk accounting # pgsql-voip # Filter attributes from the accounting response. attr_filter.accounting_response # # See "Autz-Type Status-Server" for how this works. # # Acct-Type Status-Server { # # } } and post-auth { # Get an address from the IP Pool. # main_pool # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. # reply_log # # After authenticating the user, do another SQL query. # # See "Authentication Logging Queries" in sql.conf sql * sqlippool* # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # # Un-comment the following if you have set # 'edir_account_policy_check = yes' in the ldap module sub-section of # the 'modules' section. # # ldap exec # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # # Add the ldap module name (or instance) if you have set # 'edir_account_policy_check = yes' in the ldap module configuration # Post-Auth-Type REJECT { attr_filter.access_reject } }

1 0

Poll: Bug reporting system
by Alan DeKok 14 Apr '09

14 Apr '09

Due to a HD loss, bugs.freeradius.org is down, and won't be coming back. Unfortunately, this means a loss of patches, reports, user accounts, etc. Before we put another bug system online, we would like to ask for your input. Which bug reporting system do you use? Which one do you prefer? Which ones are horrible, and shouldn't be considered? Alan DeKok.

5 5

3Com 3226 .1X to freeradius fails
by john 14 Apr '09

14 Apr '09

Hello all, I am trying to connect a Windows XP/sp2 machine to my network using a 3com 3226 superstack switch as a NAS. This windows Client can successfully authenticate via an wireless access point when using WPA2/AES via PEAP/mschap2. However when I plug the same client into my 3com 3226 switch configured for .1X I am unable to authenticate. The supplicant interface is the only wired interface on this laptop, is configured for PEAP, I am not trying to use a certificate at this point, Auth type is EAP-MSCHAPV2, and automatically user windows logon is ticked. Running wireshark on the XP box shows no radius traffic but a series of EAP messages that go like this: EAP failure from NAS EAP Request message from NAS EAP Response from supplicant EAP Request from NAS EAP Response from Supplicant EAP failure from NAS EAP Request from NAS EAP Response from supplicant EAP request, PEAP [Palekar] from NAS Client hello, SSL from supplicant Then nothing else... I hope someone can help me figure this out. Thanks! John Output from the Freeradius server is below: FreeRADIUS Version 2.1.5, for host i486-pc-linux-gnu, built on Apr 1 2009 at 10:01:13 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/mschap.back.secondtry including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/mschap.back including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/control-socket including configuration file /etc/freeradius/sites-enabled/inner-tunnel group = freerad user = freerad including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.1.8.100 { require_message_authenticator = no secret = "testing123" shortname = "10.1.8.100" nastype = "other" } client 10.1.1.0/20 { require_message_authenticator = no secret = "testing123" shortname = "1xTestNet0" nastype = "other" } client 10.1.0.0/16 { require_message_authenticator = no secret = "testing123" shortname = "1xTestNet" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=VANGUARD --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/freeradius/freeradius.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/freeradius/freeradius.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.1.8.100 port 1813, id=32, length=108 User-Name = "VANGUARD\\john_s" NAS-Port = 1 EAP-Message = 0x020100140156414e47554152445c6a6f686e5f73 NAS-IP-Address = 10.1.8.100 NAS-Identifier = "10.1.8.100 " NAS-Port-Type = Ethernet Message-Authenticator = 0xaefa2f8f4255822d5523a504d3c998df +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "VANGUARD\john_s", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 20 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 32 to 10.1.8.100 port 1813 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb96e7c49b96c65552a39bc65b0823a09 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.1.8.100 port 1814, id=184, length=186 User-Name = "VANGUARD\\john_s" NAS-Port = 1 EAP-Message = 0x0202005019800000004616030100410100003d030149e3c6c36b10ac952d7100e072cc8b1eea352930890bc5eca9fea0e16bccb2a800001600040005000a000900640062000300060013001200630100 State = 0xb96e7c49b96c65552a39bc65b0823a09 NAS-IP-Address = 10.1.8.100 NAS-Identifier = "10.1.8.100 " NAS-Port-Type = Ethernet Message-Authenticator = 0x60ebf677ac963040b965c6a2b1eb5d2c +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "VANGUARD\john_s", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 70 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0041], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 184 to 10.1.8.100 port 1814 EAP-Message = 0x0103040019c00000089b160301002a02000026030149e3c6c5540e70976e291d5df5a67728e7350d91eb98b90870bb20bf8aba02a300000400160301085e0b00085a0008570003a6308203a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb96e7c49b86d65552a39bc65b0823a09 Finished request 1. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 32 with timestamp +66 Cleaning up request 1 ID 184 with timestamp +66 Ready to process requests.

3 5

help for radius
by Basant Agarwal 14 Apr '09

14 Apr '09

Hello , Please let me know .. Is it compulsory to configure EAP/PEAP . Since our end user have windows xp /vista .. Or it will work with EAP -md5 (that is default configuration , without any change after installation ...!!) also ..?? thanks.

2 1

eap issues
by Craig White 14 Apr '09

14 Apr '09

Trying both TLS and TTLS on Macintosh OS X 10.5.5 certificates seem to be fine on both Windows and Macintosh using the ca.der and caclient.p12 (using Ivan's newer script for generating) for TLS Below is radiusd -X log with one failed attempt and it just seems as if the eap challenges go out but responses never come back. LDAP authorizes and authenticates my VPN connections fine, it's just 802.1x that is my problem. Any bone tossed here would be appreciated Craig FreeRADIUS Version 2.1.1, for host i686-redhat-linux-gnu, built on Dec 9 2008 at 20:42:36 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/mschap-dist including configuration file /etc/raddb/modules/preprocess-dist including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/realm-dist including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/inner-eap-dist including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "$OBSCURED" nastype = "other" } client 192.168.100.9/32 { require_message_authenticator = no secret = "$OBSCURED" shortname = "RRAS" } client 192.168.10.251/32 { require_message_authenticator = no secret = "$OBSCURED" shortname = "WAP-2" } client 192.168.10.250/32 { require_message_authenticator = no secret = "$OBSCURED" shortname = "WAP-1" } client 192.168.100.7/32 { require_message_authenticator = no secret = "$OBSCURED" shortname = "Test" } client 192.168.10.7/32 { require_message_authenticator = no secret = "$OBSCURED" shortname = "Test" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "localhost" port = 389 password = "$OBSCURED" identity = "cn=admin,o=Company,c=US" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" basedn = "ou=People,ou=Accounts,o=Company,c=US" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "userPassword" auto_header = no access_attr = "uid" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(&(objectClass=PosixGroup)(memberUID= %{Stripped-User-Name:-%{User-Name}}))" groupmembership_attribute = "users-remote" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x95f6988 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "$OBSCURED" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_detail Module: Instantiating auth_log detail auth_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m% d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.10.251 port 2054, id=2, length=143 User-Name = "spare" NAS-IP-Address = 192.168.10.251 NAS-Port = 0 Called-Station-Id = "00-21-29-E3-D1-8A" Calling-Station-Id = "00-1F-5B-CB-1C-DB" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02e5000a017370617265 Message-Authenticator = 0xd54f005ed1a17b4b96c8f2875e2a4e95 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/192.168.10.251/auth-detail-20090413 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m %d expands to /var/log/radius/radacct/192.168.10.251/auth-detail-20090413 [auth_log] expand: %t -> Mon Apr 13 11:39:49 2009 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "spare", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 229 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for spare [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=spare) [ldap] expand: ou=People,ou=Accounts,o=Company,c=US -> ou=People,ou=Accounts,o=Company,c=US rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: bind as cn=admin,o=Company,c=US/$OBSCURED to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=People,ou=Accounts,o=Company,c=US, with filter (uid=spare) [ldap] checking if remote access for spare is allowed by uid [ldap] Added User-Password = {crypt}$OBSCURED in check items [ldap] looking for check items in directory... rlm_ldap: sambaNtPassword -> NT-Password == 0x$OBSCURED rlm_ldap: sambaLmPassword -> LM-Password == 0x$OBSCURED [ldap] looking for reply items in directory... [ldap] user spare authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.10.251 port 2054 EAP-Message = 0x01e600160410f586e30cd2c84a45f7f8a8d753a29f8a Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf43856c6f4de520cc1e0b754fc05eac1 Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 2 with timestamp +14 Ready to process requests. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 4