August 2009 - Freeradius-Users - lists.freeradius.org

MS-CHAP cannot login
by Sanhenra Sinaga 13 Aug '09

13 Aug '09

Dear all, I have configure freeradius with MSCHAP but, access point cannot connect Can someone help me please? w.regards, sanhenra FreeRADIUS Version 2.1.3, for host i686-pc-linux-gnu, built on Aug 7 2009 at 00:48:57 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.1.0.0/16 { require_message_authenticator = no secret = "testing123" shortname = "tk03" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = no require_encryption = yes require_strong = yes with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. rad_recv: Access-Request packet from host 10.1.0.6 port 1026, id=0, length=177 User-Name = "anonymous(a)myabc.com" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "00-1E-E5-9D-64-B1:TK_03" Calling-Station-Id = "00-19-D2-70-08-2B" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001801616e6f6e796d6f7573406d796162632e636f6d Message-Authenticator = 0x110e4163a62ce3abf65b337f2e05cbd4 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] Looking up realm "myabc.com" for User-Name = "user" [suffix] No such realm "myabc.com" ++[suffix] returns noop [eap] EAP packet type response id 0 length 24 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 10.1.0.6 port 1026 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d84cdac8d85d49d7d142920e89fc0d6 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.1.0.6 port 1026, id=1, length=273 User-Name = "anonymous(a)myabc.com" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "00-1E-E5-9D-64-B1:TK_03" Calling-Station-Id = "00-19-D2-70-08-2B" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100661900160301005b0100005703014a839a34df0167a8634667662e83cfe285386fe662fbfd6c5649649633e7a4a600003000390038003500160013000a00330032002f0066000500040065006400630062006000150012000900140011000800030100 State = 0x8d84cdac8d85d49d7d142920e89fc0d6 Message-Authenticator = 0xbdc03befd1b9693416b2d8af238f6150 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] Looking up realm "myabc.com" for User-Name = "user" [suffix] No such realm "myabc.com" ++[suffix] returns noop [eap] EAP packet type response id 1 length 102 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 005b], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 1 to 10.1.0.6 port 1026 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d84cdac8c86d49d7d142920e89fc0d6 Finished request 1. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.1.0.6 port 1026, id=2, length=177 User-Name = "anonymous(a)myabc.com" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "00-1E-E5-9D-64-B1:TK_03" Calling-Station-Id = "00-19-D2-70-08-2B" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061900 State = 0x8d84cdac8c86d49d7d142920e89fc0d6 Message-Authenticator = 0xaf1d69f5dcafbd63b81a62ca05b78514 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] Looking up realm "myabc.com" for User-Name = "user" [suffix] No such realm "myabc.com" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 10.1.0.6 port 1026 EAP-Message = 0x010303fc194000b9fd1ba4bb10bece300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3039303830373135323931365a170d3130303830373135323931365a308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xb9274f65eec7e2df Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d84cdac8f87d49d7d142920e89fc0d6 Finished request 2. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.1.0.6 port 1026, id=3, length=177 User-Name = "anonymous(a)myabc.com" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "00-1E-E5-9D-64-B1:TK_03" Calling-Station-Id = "00-19-D2-70-08-2B" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x8d84cdac8f87d49d7d142920e89fc0d6 Message-Authenticator = 0xfcb3ad5d3cd92cea16a30413df67748a +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] Looking up realm "myabc.com" for User-Name = "user" [suffix] No such realm "myabc.com" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 10.1.0.6 port 1026 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x509c8560ddd977adc6a1656de5d9eaac11a6ade86886394b37a4d2b8ce2b28006380e201219433f560414e50edbb417f8d39676e871aceb34752f6694f2b63ebed5bb5ea307a5d40cb630f0cd81aa7d671823fdfba795dffff6f9c568070feec72d605181d758edd6c12a43ddeebd1ba1e90328b9117597e8af2717bbf8609ee6c9625a8aa769d654b65767816e998fd25dd2cb7c6b40bb358c3a132b0287ef3a2c88f27f61ed2a572524ecd3eaefd076ffcfbdd3824c590d84fec1c021bd26b6c84925f16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d84cdac8e80d49d7d142920e89fc0d6 Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.1.0.6 port 1026, id=4, length=184 User-Name = "anonymous(a)myabc.com" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "00-1E-E5-9D-64-B1:TK_03" Calling-Station-Id = "00-19-D2-70-08-2B" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0204000d19001503010002022a State = 0x8d84cdac8e80d49d7d142920e89fc0d6 Message-Authenticator = 0x42af6cb33ca2efc174909d180290b109 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] Looking up realm "myabc.com" for User-Name = "user" [suffix] No such realm "myabc.com" ++[suffix] returns noop [eap] EAP packet type response id 4 length 13 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< TLS 1.0 Alert [length 0002], fatal bad_certificate TLS Alert read:fatal:bad certificate TLS_accept:failed in SSLv3 read client certificate A rlm_eap: SSL error error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate SSL: SSL_read failed inside of TLS (-1), TLS session fails. TLS receive handshake failed during operation [peap] eaptls_process returned 4 [peap] EAPTLS_OTHERS [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> user attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 4 for 1 seconds Going to the next request Waking up in 0.8 seconds. Sending delayed reject for request 4 Sending Access-Reject of id 4 to 10.1.0.6 port 1026 EAP-Message = 0x04040004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. Cleaning up request 0 ID 0 with timestamp +5462 Waking up in 0.1 seconds. Cleaning up request 1 ID 1 with timestamp +5462 Cleaning up request 2 ID 2 with timestamp +5462 Cleaning up request 3 ID 3 with timestamp +5462 Waking up in 1.0 seconds. Cleaning up request 4 ID 4 with timestamp +5462 Ready to process requests.

3 2

Problem configuring CoA
by DILLIOTT Tony 13 Aug '09

13 Aug '09

Hi * I am trying to get COA server running with 2.1.6. After downloading and successfully installing on Redhat Linux setup, I have not been able to get COA to work at all. After a lot of investigation, I have found a discrepency with the clients.conf file in the tar file I downloaded in 2.1.6 and a version I see on the -net. Specifically, the following lines are missing from the file in the tar file compared to an example I found on the web: # A pointer to the "home_server_pool" OR a "home_server" # section that contains the CoA configuration for this # client. For an example of a coa home server or pool, # see raddb/sites-available/originate-coa # coa_server = coa } After going through the C source code I see that this missing coa_server pointer is in fact referenced in the source code. I have now added this, but still I have issues. I originally commented out the coa pool because I don't want pools for now. SO, my problem is that even after adding the following line to my clients.conf file to match the pointer file to the example host_server config in originate-coa file,: coa_server = localhost-coa I still get the following error when I run radiusd -Xx : /usr/local/etc/raddb/clients.conf[30]: No such home_server or home_server_pool "localhost-coa" So now I uncomment the stuff to do the coa pool, and now I get the following debug output ### Loading Realms and Home Servers ###### : proxy server { [stuff] } home_server localhost { [stuff] } home_server_pool my_auth_failover { [stuff] } realm example.com { [stuff] } realm LOCAL { } /usr/local/etc/raddb/site-enabled/originate-coa[121]: home_server "localhost-coa" does not exist. Given the file discrepency I have already uncovered, I assume I must be missing something else but I cannot find out what. I appreciate any help as soon as possible. thanks. tony

3 5

Adding reply attributes when proxy
by mikoi 13 Aug '09

13 Aug '09

Hello. I have a FR 2.1.6+MySQL running on one box and a another box running Radius/Token server. Using realms in proxy.conf. Authentication works fine when proxying but the reply attributes from the SQL-table radreply are not added in the Access-Accept packet when proxy is used. If i use ClearText-Password it works fine. Googled and i found that earlier versions of FR had the post_proxy_authorize = yes that did this. How can i configure it so that attributes from radreply are sent? Regards Mika -- View this message in context: http://www.nabble.com/Adding-reply-attributes-when-proxy-tp24937303p2493730… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

Free Radius Compilation Error on RHEL5.3
by Kamal Garg 13 Aug '09

13 Aug '09

Hi, I am facing problem while making freeradius-server-2.1.6 on RHEL5.3, however I am able to successfully build and install the freeradius-server-2.1.6 on RHEL4.0. Following are the error logs I am getting while building freeradius server on RHEL5.3. [root@VMWare freeradius-server-2.1.6]# make gmake[1]: Entering directory `/home/freeradius-server-2.1.6' Making all in libltdl... gmake[2]: Entering directory `/home/freeradius-server-2.1.6/libltdl' /usr/bin/gmake all-am gmake[3]: Entering directory `/home/freeradius-server-2.1.6/libltdl' /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c -o ltdl.lo ltdl.c mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c ltdl.c -fPIC -DPIC -o .libs/ltdl.o ltdl.c: In function 'lt_dladderror': ltdl.c:967: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'tryall_dlopen_module': ltdl.c:2482: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:2483: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:2484: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'canonicalize_path': ltdl.c:2575: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:2576: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'argzize_path': ltdl.c:2639: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:2640: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:2641: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'foreach_dirinpath': ltdl.c:2710: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'find_file_callback': ltdl.c:2750: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:2751: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:2752: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'try_dlopen': ltdl.c:3068: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3069: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3095: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3127: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3333: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'lt_dlopenext': ltdl.c:3477: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'lt_argz_insertinorder': ltdl.c:3606: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3607: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3608: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'lt_argz_insertdir': ltdl.c:3636: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3637: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3638: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3672: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'list_files_by_dir': ltdl.c:3697: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3698: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3699: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3700: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c: In function 'lt_dlpath_insertdir': ltdl.c:3993: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:3994: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:4002: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:4007: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:4008: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:4017: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:4032: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type ltdl.c:4033: warning: passing argument 4 of '__assert_fail' discards qualifiers from pointer target type /usr/include/argz.h: In function 'argz_next': /usr/include/argz.h:181: internal compiler error: Segmentation fault Please submit a full bug report, with preprocessed source if appropriate. See <URL:http://bugzilla.redhat.com/bugzilla> for instructions. Preprocessed source stored into /tmp/ccYFkazU.out file, please attach this to your bugreport. gmake[3]: *** [ltdl.lo] Error 1 gmake[3]: Leaving directory `/home/freeradius-server-2.1.6/libltdl' gmake[2]: *** [all] Error 2 gmake[2]: Leaving directory `/home/freeradius-server-2.1.6/libltdl' gmake[1]: *** [common] Error 2 gmake[1]: Leaving directory `/home/freeradius-server-2.1.6' make: *** [all] Error 2 [root@VMWare freeradius-server-2.1.6]# Is there any compatibility issues between freeradius and RHEL5.3? Is there any way out to successfully build freeradius server on RHEL5.3 ? Thanks & Regards, Kamal

1 0

freeradius 2.1.6 radiusd process user
by ramesh p 13 Aug '09

13 Aug '09

Hi All, I have installed freeradius 2.1.6 on my linux box. But radiusd process is running as root. root 25027 1 0 04:23 ? 00:00:00 /usr/local/fnmt/freeradius2/sbin/radiusd I saw in older versions 1.1.6 running as nobody user/group. Is it fine if we run as root user? or we need to run as 'radius' user? How to that change. Please suggest. Thanks, Rams.

1 0

Re: Re: freeradius2.1.6 module errors
by ramesh p 13 Aug '09

13 Aug '09

Thanks alot. i can use either 'Stop' or 'stop'. It's not case sensitive am i correct? Thanks, Rams. Thu, 13 Aug 2009 00:56:21 -0700 On 13/8/09 08:41, Michael Bryant wrote: > Wrong operator. > Use = or not := > --Mike It's a comparison so it should be: if (Acct-Status-Type == 'stop') { sql } Steve -- Steven Carr Systems Development Officer SLS/ITS/Systems - (0191) 515 3953

1 0

Re:freeradius2.1.6 module errors
by ramesh p 13 Aug '09

13 Aug '09

Hi, Here is the full accounting section of sites-available/default accounting { # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily # Update the wtmp file # # If you don't use "radlast", you can delete this line. unix # # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. radutmp # sradutmp # Return an address to the IP Pool when we see a stop record. # main_pool # # Log traffic to an SQL database. # # See "Accounting queries" in sql.conf #sql * if(Acct-Status-Type := 'stop') { sql }* # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # Cisco VoIP specific bulk accounting # pgsql-voip # Filter attributes from the accounting response. attr_filter.accounting_response # # See "Autz-Type Status-Server" for how this works. # Acct-Type Status-Server { } } Thanks, Rams. On 13/8/09 07:10, ramesh p wrote: > Though i have placed the code in sites-available/default > under accounting section: > > if(Acct-Status-Type := 'stop'){ > sql Can you post the full section that you have added this to, if you have only added just those 2 lines then you haven't closed the statement off with a "}". Steve -- Steven Carr Systems Development Officer SLS/ITS/Systems - (0191) 515 3953

3 2

Re: Freeradius-Users Digest, Vol 52, Issue 59
by ramesh p 13 Aug '09

13 Aug '09

Hi, Here is the full accounting section of sites-available/default accounting { # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily # Update the wtmp file # # If you don't use "radlast", you can delete this line. unix # # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. radutmp # sradutmp # Return an address to the IP Pool when we see a stop record. # main_pool # # Log traffic to an SQL database. # # See "Accounting queries" in sql.conf #sql * if(Acct-Status-Type := 'stop') { sql }* # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # Cisco VoIP specific bulk accounting # pgsql-voip # Filter attributes from the accounting response. attr_filter.accounting_response # # See "Autz-Type Status-Server" for how this works. # Acct-Type Status-Server { } } Thanks, Rams. On 13/8/09 07:10, ramesh p wrote: > Though i have placed the code in sites-available/default > under accounting section: > > if(Acct-Status-Type := 'stop'){ > sql Can you post the full section that you have added this to, if you have only added just those 2 lines then you haven't closed the statement off with a "}". Steve -- Steven Carr Systems Development Officer SLS/ITS/Systems - (0191) 515 3953

1 0

Re: freeradius2.1.6 module errors
by ramesh p 13 Aug '09

13 Aug '09

Though i have placed the code in sites-available/default under accounting section: if(Acct-Status-Type := 'stop'){ sql getting the following error with radiusd -X: [root@localhost raddb]# ../../sbin/radiusd -X FreeRADIUS Version 2.1.6, for host i686-pc-linux-gnu, built on Aug 10 2009 at 04:51:09 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/fnmt/freeradius2//etc/raddb/radiusd.conf including configuration file /usr/local/fnmt/freeradius2//etc/raddb/proxy.conf including configuration file /usr/local/fnmt/freeradius2//etc/raddb/clients.conf including files in directory /usr/local/fnmt/freeradius2//etc/raddb/modules/ including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/ldap including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/pap including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/exec including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/expr including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/attr_filter including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/radutmp including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/preprocess including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/always including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/ detail.example.com including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/attr_rewrite including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/etc_group including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/unix including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/mac2vlan including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/chap including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/smsotp including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/expiration including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/pam including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/inner-eap including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/acct_unique including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/wimax including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/smbpasswd including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/logintime including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/sql_log including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/realm including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/linelog including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/otp including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/mac2ip including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/checkval including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/krb5 including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/mschap including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/counter including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/detail including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/digest including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/passwd including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/sradutmp including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/files including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/policy including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/detail.log including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/perl including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/ippool including configuration file /usr/local/fnmt/freeradius2//etc/raddb/modules/echo including configuration file /usr/local/fnmt/freeradius2//etc/raddb/eap.conf including configuration file /usr/local/fnmt/freeradius2//etc/raddb/sql.conf including configuration file /usr/local/fnmt/freeradius2//etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/fnmt/freeradius2//etc/raddb/policy.conf including files in directory /usr/local/fnmt/freeradius2//etc/raddb/sites-enabled/ including configuration file /usr/local/fnmt/freeradius2//etc/raddb/sites-enabled/status including configuration file /usr/local/fnmt/freeradius2//etc/raddb/sites-enabled/control-socket including configuration file /usr/local/fnmt/freeradius2//etc/raddb/sites-enabled/default */usr/local/fnmt/freeradius2//etc/raddb/sites-enabled/default[355]: Parse error in condition at: Acct-Status-Type := "stop") Errors reading /usr/local/fnmt/freeradius2//etc/raddb/radiusd.conf * Please suggest ... Thanks, Rams. > > > Message: 3 > Date: Wed, 12 Aug 2009 20:49:17 +0100 > From: Alan Buxey <A.L.M.Buxey(a)lboro.ac.uk> > Subject: Re: freeradius2.1.6 module errors > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <20090812194917.GE24232(a)lboro.ac.uk> > Content-Type: text/plain; charset=us-ascii > > Hi, > > > default { > > accounting { > > if(Acct-Status-Type = 'stop'){ > > sql > > or edit the required dialup.conf for the chosen SQL solution > and only have the STOP insert command there? > > alan > > > ------------------------------ > > Message: 4 > Date: Wed, 12 Aug 2009 21:25:55 +0100 > From: Arran Cudbard-Bell <a.cudbard-bell(a)sussex.ac.uk> > Subject: Re: freeradius2.1.6 module errors > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <2F3CCBEC-14E8-4AF5-B3C3-13F2187E6ADA(a)sussex.ac.uk> > Content-Type: text/plain; charset=us-ascii; format=flowed > > It used to get angry when you did that.... > > -- > > On 12 Aug 2009, at 20:49, Alan Buxey <A.L.M.Buxey(a)lboro.ac.uk> wrote: > > > Hi, > > > >> default { > >> accounting { > >> if(Acct-Status-Type = 'stop'){ > >> sql > > > > or edit the required dialup.conf for the chosen SQL solution > > and only have the STOP insert command there? > > > > alan > > - > > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > ------------------------------ > > Message: 5 > Date: Wed, 12 Aug 2009 21:55:55 +0100 > From: Alan Buxey <A.L.M.Buxey(a)lboro.ac.uk> > Subject: Re: freeradius2.1.6 module errors > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <20090812205555.GA24520(a)lboro.ac.uk> > Content-Type: text/plain; charset=us-ascii > > Hi, > > It used to get angry when you did that.... > > ..it might still do - hence my email was a question > rather than a statement ;-) > > alan > > >

2 1

Re: freeradius2.1.6 module errors
by ramesh p 12 Aug '09

12 Aug '09

I'am trying to store only "Stop" packets in database, and i'm not storing Acct-Status-Type = start,Tunnel-Stop, Tunnel-start,Failed etc... packets in db. How i can achieve this? Please advice. Thanks, Rams. > > > On Wed, Aug 12, 2009 at 3:30 PM, < > freeradius-users-request(a)lists.freeradius.org> wrote: > >> Send Freeradius-Users mailing list submissions to >> freeradius-users(a)lists.freeradius.org >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://lists.freeradius.org/mailman/listinfo/freeradius-users >> or, via email, send a message with subject or body 'help' to >> freeradius-users-request(a)lists.freeradius.org >> >> You can reach the person managing the list at >> freeradius-users-owner(a)lists.freeradius.org >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Freeradius-Users digest..." >> >> >> Today's Topics: >> >> 1. Re: freeradius2.1.6 module errors (Doug Hardie) >> 2. Freeradius with jradius (shivashankar) >> 3. Help with passwords (David Jansen) >> 4. Re: Help with passwords (Alan DeKok) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Tue, 11 Aug 2009 16:05:21 -0700 >> From: Doug Hardie <bc979(a)lafn.org> >> Subject: Re: freeradius2.1.6 module errors >> To: FreeRadius users mailing list >> <freeradius-users(a)lists.freeradius.org> >> Message-ID: <EBEB797D-D771-46BE-BA70-C8BE1F2959FA(a)lafn.org> >> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes >> >> >> On 11 August 2009, at 06:54, ramesh p wrote: >> >> > Am doing it correctly? Please suggest? >> >> Obviously not since FreeRADIUS is telling you it doesn't understant >> the Acct-Type of Ignore. I suspect you are not getting a good answer >> is that I (for one) do not understand what you are trying to >> accomplish. You use the term ignore which implies to me that you want >> FreeRADIUS to drop any non Stop packets and not respond at all. That >> means that the NAS will continue to retry every one of those packets >> for some predetermined number of times wasting bandwidth. I would >> recommend providing some details on what you want to accomplish and >> someone may be able to show you how to do that. >> >> > >> > Thanks, >> > Rams. >> > >> > 4. freeradius2.1.6 module errors (ramesh p) >> > >> > >> > ---------------------------------------------------------------------- >> > >> > Message: 4 >> > Date: Tue, 11 Aug 2009 12:50:30 +0530 >> > From: ramesh p <rock786143(a)gmail.com> >> > Subject: freeradius2.1.6 module errors >> > To: FreeRadius users mailing list >> > <freeradius-users(a)lists.freeradius.org> >> > Message-ID: >> > <6b6aa6710908110020r50a6d15aked46497f07cdadc7(a)mail.gmail.com> >> > Content-Type: text/plain; charset="iso-8859-1" >> > >> > Hi All, >> > >> > I have placed a small module "IGNORE" to ignore packets other than >> > "Stop" >> > type. >> > >> > modified acct_users file as: >> > >> > DEFAULT Acct-Status-Type == "Tunnel-Stop", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Tunnel-Start", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Start", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Failed", Acct-Type := "IGNORE" >> > #DEFAULT Acct-Status-Type == "Checkpoint", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Accounting-On", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Accounting-Off", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Tunnel-Reject", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Tunnel-Link-Start", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Tunnel-Link-Stop", Acct-Type := "IGNORE" >> > DEFAULT Acct-Status-Type == "Tunnel-Link-Reject", Acct-Type := >> > "IGNORE" >> > >> > and added the following in accounting section of main configuration >> > file : >> > >> > Acct-Type IGNORE { >> > >> > ok >> > >> > } >> > >> > The above configuration was working in 1.1.6 version. However getting >> > following error in 2.1.6 version. >> > Module: Instantiating files >> > files { >> > usersfile = "/usr/local/fnmt/freeradius2//etc/raddb/users" >> > acctusersfile = "/usr/local/fnmt/freeradius2//etc/raddb/ >> > acct_users" >> > preproxy_usersfile = >> > "/usr/local/fnmt/freeradius2//etc/raddb/preproxy_users" >> > compat = "no" >> > } >> > /usr/local/fnmt/freeradius2//etc/raddb/acct_users[25]: Parse error >> > (check) >> > for entry DEFAULT: Unknown value IGNORE for attribute Acct-Type >> > >> > >> > Errors reading /usr/local/fnmt/freeradius2//etc/raddb/acct_users >> > /usr/local/fnmt/freeradius2//etc/raddb/modules/files[7]: Instantiation >> > failed for module "files" >> > >> > please help. >> > >> > Thanks, >> > Rams. >> > Please help >> >

3 5