Hi,
I have successfully setup a FreeRADIUS 1.1.7 running on Ubuntu 8.0.4
LTS. Users used their own Windows ID and password to connect Wi-Fi
network. The problem was that, after connected for a few hours, some of
the Wi-Fi clients were disconnected from the Wi-Fi AP, and engaged in a
loop of reject-and-reconnect (see below debug log).
=== begin of debug log ===
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/freeradius/proxy.conf
Config: including file: /etc/freeradius/clients.conf
Config: including file: /etc/freeradius/snmp.conf
Config: including file: /etc/freeradius/eap.conf
Config: including file: /etc/freeradius/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = yes
mschap: passwd = "(null)"
mschap: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--domain=%{mschap:NT-Domain}
--username=%{Stripped-User-Name:-%{mschap:User-Name:-None}}
--challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "peap"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/etc/freeradius/certs/riga-key.pem"
tls: certificate_file = "/etc/freeradius/certs/riga-cert.pem"
tls: CA_file = "/etc/freeradius/certs/cacert.pem"
tls: private_key_password = "sunciti"
tls: dh_file = "/etc/freeradius/certs/dh"
tls: random_file = "/dev/urandom"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
peap: default_eap_type = "mschapv2"
peap: copy_request_to_tunnel = no
peap: use_tunneled_reply = no
peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/freeradius/huntgroups"
preprocess: hints = "/etc/freeradius/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/freeradius/users"
files: acctusersfile = "/etc/freeradius/acct_users"
files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/freeradius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=0, length=206
Message-Authenticator = 0x4cd73215c49f3987204f5ef273507560
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020000110153554e434954495c4a6f686e
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 0 length 17
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 0
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 0 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x15ebf04bc8167b343a19fb5bd85b283a
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=1, length=287
Message-Authenticator = 0x4a4bc5faffd04175071a46875bc23bfe
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0x15ebf04bc8167b343a19fb5bd85b283a
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x0201005019800000004616030100410100003d03014c7326dd1216c6f5f26cff850377f6bd79386ec9d61e01a1c719ec41d4f2a58700001600040005000a000900640062000300060013001200630100
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 1 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 1
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 1
modcall: leaving group authorize (returns updated) for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 099e], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 1 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
0x301d0603551d0e0416041481bbaebcfb867498cfc97345cd31814f079acdb5301f0603551d2304183016801447e7f27138f072413b70c06738f2a81016b9c534300b0603551d0f0404030205e030740603551d11046d306b8269696d61702e736d6c2e636974697a656e2e636f2e6a7020444e533a736d74702e736d6c2e636974697a656e2e636f2e6a7020444e533a6c6461702e736d6c2e636974697a656e2e636f2e6a7020444e533a7261646975732e736d6c2e636974697a656e2e636f2e6a70300d06092a864886f70d010105050003820101008857e23dcbfe4cfe1aaf5bac29bcc890357dfba960c0606476135027e11df4231e53825dbd08
EAP-Message = 0xb3b4ab10f1ce37c387843b2c2bc634035b7f913e94ca
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x3968cdb160476e2f78f70a4395e1c2c9
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=2, length=213
Message-Authenticator = 0x392d8ea72ce3b1d7b536448e82f0edcd
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0x3968cdb160476e2f78f70a4395e1c2c9
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020200061900
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 2
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 2
modcall: leaving group authorize (returns updated) for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group authenticate (returns handled) for request 2
Sending Access-Challenge of id 2 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x7138f072413b70c06738f2a81016b9c534a1
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf2da980a8b5336a38e34151bb7389396
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=3, length=213
Message-Authenticator = 0x51cbe89ff574fe4490d66bde616f1506
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0xf2da980a8b5336a38e34151bb7389396
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020300061900
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "chap" returns noop for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 3
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 3
modcall: leaving group authorize (returns updated) for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 3
modcall: leaving group authenticate (returns handled) for request 3
Sending Access-Challenge of id 3 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message =
0x01040201190081c3a481c03081bd310b300906035504061302484b3119301706035504081310486f6e67204b6f6e6720532e412e522e3112301006035504071309486f6e67204b6f6e6731233021060355040a131a53756e63697469204d616e75666163747572657273204c74642e31243022060355040b131b534d4c2043657274696669636174696f6e20417574686f72697479310f300d06035504031306534d4c2043413123302106092a864886f70d0109011614636140736d6c2e636974697a656e2e636f2e6a7082090099158bade43392a9300c0603551d13040530030101ff300d06092a864886f70d01010505000382010100b7fa7749ad
EAP-Message =
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
EAP-Message = 0x0100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4f5a891fd588b4466da2de0e77d8e466
Finished request 3
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=4, length=399
Message-Authenticator = 0x7e63ed463255a51ccc8a3bbe24f57501
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0x4f5a891fd588b4466da2de0e77d8e466
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x020400c01980000000b616030100861000008200806a6b66e0f95058b01d56baaf089d579377c191430e3878b247ba56a38a476dd0b494e1902413b60830538bc9f2ec7a8454ca113f64279e0fd37177cdbe824ad39a855f5efd4909bc5897bfbad8a88e6c2ec581b99ea84e6b93cdfb6e6a180dfed4ae58dd923982e615d2ab7c987d7fef5e97adec39eadc4d5383e791fbe122fc14030100010116030100200519772fdc3e2d0d196c2c0a2b18e3a7c5164871277f1d844716e95899717176
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
modcall[authorize]: module "chap" returns noop for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 4 length 192
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 4
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 4
modcall: leaving group authorize (returns updated) for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
TLS_accept: SSLv3 read client key exchange A
rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 read finished A
rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
TLS_accept: SSLv3 write change cipher spec A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 write finished A
TLS_accept: SSLv3 flush data
(other): SSL negotiation finished successfully
SSL Connection Established
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 4
modcall: leaving group authenticate (returns handled) for request 4
Sending Access-Challenge of id 4 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message =
0x0105003119001403010001011603010020ada22380d7205f4e4e7bd7c63c65815a5580610793f930788e213e7d8604a1cc
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x23b30b87c57b405aee0914da2609bedb
Finished request 4
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=5, length=213
Message-Authenticator = 0xb216b3fbc01801639d48f96ca79ce232
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0x23b30b87c57b405aee0914da2609bedb
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020500061900
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 5 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 5
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 5
modcall: leaving group authorize (returns updated) for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake is finished
eaptls_verify returned 3
eaptls_process returned 3
rlm_eap_peap: EAPTLS_SUCCESS
modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
Sending Access-Challenge of id 5 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message =
0x010600201900170301001549f53272b418e7f139196a3aafbc48571f30318ae8
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf1f66af663db654beaf9423d52876463
Finished request 5
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=6, length=247
Message-Authenticator = 0x1b4288c2341daf9bf0f5bf1ff0f31e49
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0xf1f66af663db654beaf9423d52876463
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x020600281900170301001d84583efaee4e63a35637e9c4847c097a93c046d9a4774fe8c3ff4c68ef
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 6 length 40
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 6
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 6
modcall: leaving group authorize (returns updated) for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Identity - SUNCITI\John
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message = 0x020600110153554e434954495c4a6f686e
PEAP: Got tunneled identity of SUNCITI\John
PEAP: Setting default EAP type for tunneled EAP session.
PEAP: Setting User-Name to SUNCITI\John
PEAP: Sending tunneled request
EAP-Message = 0x020600110153554e434954495c4a6f686e
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "SUNCITI\\John"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 6 length 17
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched entry DEFAULT at line 153
modcall[authorize]: module "files" returns ok for request 6
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 6
modcall: leaving group authorize (returns updated) for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: EAP Identity
rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 6
modcall: leaving group authenticate (returns handled) for request 6
PEAP: Got tunneled reply RADIUS code 11
EAP-Message =
0x010700261a010700211098fca94b1bd9ecfaf714ea0b15b9ddff53554e434954495c4a6f686e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x361f2d0180f35e68a619343737a09599
PEAP: Processing from tunneled session code 0xb7826db8 11
EAP-Message =
0x010700261a010700211098fca94b1bd9ecfaf714ea0b15b9ddff53554e434954495c4a6f686e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x361f2d0180f35e68a619343737a09599
PEAP: Got tunneled Access-Challenge
modcall[authenticate]: module "eap" returns handled for request 6
modcall: leaving group authenticate (returns handled) for request 6
Sending Access-Challenge of id 6 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message =
0x0107003d1900170301003238c86dcd7fd2caccad5310cf37c0f0c78193982d4c00322a1f70e9750fb6e394661028b7c0d3907687f61ea67d4b762c4486
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1c777b509b952ca92b89af252c4d4f92
Finished request 6
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=7, length=301
Message-Authenticator = 0xdad04f6062f34f55ac565c1d06086fe8
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0x1c777b509b952ca92b89af252c4d4f92
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x0207005e190017030100536d8a2ef3473c173a53dce9dac6ef084b13930bc1492f59123c9c663bfb1d089ef3c3b6434495216db8068f4fe68ce4e54e06547b4cb07eeeb23a4fa51ea75a618551d55142c9469e146a041db7ac3898267191
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "chap" returns noop for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 7 length 94
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 7
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 7
modcall: leaving group authorize (returns updated) for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: EAP type mschapv2
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message =
0x020700471a0207004231896d97db189a9706086e2d85c476046a0000000000000000b8a0dd95d15570322f85cfeadcdc587d7724463bf5b9fd180053554e434954495c4a6f686e
PEAP: Setting User-Name to SUNCITI\John
PEAP: Adding old state with 36 1f
PEAP: Sending tunneled request
EAP-Message =
0x020700471a0207004231896d97db189a9706086e2d85c476046a0000000000000000b8a0dd95d15570322f85cfeadcdc587d7724463bf5b9fd180053554e434954495c4a6f686e
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "SUNCITI\\John"
State = 0x361f2d0180f35e68a619343737a09599
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "chap" returns noop for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 7 length 71
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched entry DEFAULT at line 153
modcall[authorize]: module "files" returns ok for request 7
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 7
modcall: leaving group authorize (returns updated) for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/mschapv2
rlm_eap: processing type mschapv2
Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 7
rlm_mschap: No User-Password configured. Cannot create LM-Password.
rlm_mschap: No User-Password configured. Cannot create NT-Password.
rlm_mschap: Told to do MS-CHAPv2 for John with NT-Password
radius_xlat: Running registered xlat function of module mschap for
string 'NT-Domain'
radius_xlat: '--domain=SUNCITI'
radius_xlat: Running registered xlat function of module mschap for
string 'User-Name'
radius_xlat: '--username=John'
radius_xlat: Running registered xlat function of module mschap for
string 'Challenge'
mschap2: 98
radius_xlat: '--challenge=0a50110ecf0f3539'
radius_xlat: Running registered xlat function of module mschap for
string 'NT-Response'
radius_xlat:
'--nt-response=b8a0dd95d15570322f85cfeadcdc587d7724463bf5b9fd18'
Exec-Program output: Named pipe dicconnected (0xc00000b0)
Exec-Program-Wait: plaintext: Named pipe dicconnected (0xc00000b0)
Exec-Program: returned: 1
rlm_mschap: External script failed.
rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
modcall[authenticate]: module "mschap" returns reject for request 7
modcall: leaving group MS-CHAP (returns reject) for request 7
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns reject for request 7
modcall: leaving group authenticate (returns reject) for request 7
auth: Failed to validate the user.
PEAP: Got tunneled reply RADIUS code 3
MS-CHAP-Error = "\007E=691 R=1"
EAP-Message = 0x04070004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Processing from tunneled session code 0xb7800c20 3
MS-CHAP-Error = "\007E=691 R=1"
EAP-Message = 0x04070004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Tunneled authentication was rejected.
rlm_eap_peap: FAILURE
modcall[authenticate]: module "eap" returns handled for request 7
modcall: leaving group authenticate (returns handled) for request 7
Sending Access-Challenge of id 7 to 10.144.1.98 port 4856
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message =
0x010800261900170301001bcd91f9e138df313e16c573f5d3b8d9444394d120ed0466b815ca44
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xe1af7f7cc28ed1bf8ed6e1ef5ff8589b
Finished request 7
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=8, length=245
Message-Authenticator = 0x3757d2a50dc975d9c34e987c74a26151
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0xe1af7f7cc28ed1bf8ed6e1ef5ff8589b
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x020800261900170301001bf95870254776d76ebf45ce86e353b346472601edc96d717b90bd31
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
modcall[authorize]: module "preprocess" returns ok for request 8
modcall[authorize]: module "chap" returns noop for request 8
modcall[authorize]: module "mschap" returns noop for request 8
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 8
rlm_eap: EAP packet type response id 8 length 38
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 8
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 8
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 8
modcall: leaving group authorize (returns updated) for request 8
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Received EAP-TLV response.
rlm_eap_peap: Tunneled data is valid.
rlm_eap_peap: Had sent TLV failure. User was rejcted rejected
earlier in this session.
rlm_eap: Handler failed in EAP/peap
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 8
modcall: leaving group authenticate (returns invalid) for request 8
auth: Failed to validate the user.
Delaying request 8 for 1 seconds
Finished request 8
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4856, id=8, length=245
Sending Access-Reject of id 8 to 10.144.1.98 port 4856
EAP-Message = 0x04080004
Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 2 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4858, id=0, length=206
Message-Authenticator = 0x84bbf500f51ef55f836a9d02b51b9ec4
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020000110153554e434954495c4a6f686e
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 9
modcall[authorize]: module "preprocess" returns ok for request 9
modcall[authorize]: module "chap" returns noop for request 9
modcall[authorize]: module "mschap" returns noop for request 9
rlm_realm: No '@' in User-Name = "SUNCITI\John", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 9
rlm_eap: EAP packet type response id 0 length 17
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 9
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
modcall[authorize]: module "files" returns ok for request 9
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
modcall[authorize]: module "pap" returns noop for request 9
modcall: leaving group authorize (returns updated) for request 9
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 9
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 9
modcall: leaving group authenticate (returns handled) for request 9
Sending Access-Challenge of id 0 to 10.144.1.98 port 4858
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x25c5a25f128cb79234a39a94d568049f
Finished request 9
Going to the next request
Waking up in 2 seconds...
rad_recv: Access-Request packet from host 10.144.1.98:4858, id=1, length=287
Message-Authenticator = 0x7786e11bc108cadb68208de0b7782b48
Service-Type = Framed-User
User-Name = "SUNCITI\\John"
Framed-MTU = 1488
State = 0x25c5a25f128cb79234a39a94d568049f
Called-Station-Id = "00-24-73-50-BC-00:SML"
Calling-Station-Id = "1C-AF-F7-69-D9-0E"
NAS-Identifier = "3Com Access Point 7760"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message =
0x0201005019800000004616030100410100003d03014c7326e1ade72fa1567f7a01dbe24108c1e28a748612120241f1d08d41d79b2f00001600040005000a000900640062000300060013001200630100
NAS-IP-Address = 10.144.1.98
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
=== end of debug log ===
If the client manually disconnected from the AP, wait a few seconds,
then re-connect again and it succeeded. I hope someone could point what
went wrong, and how to solve the problem.
Thanks a lot.
John Mok
