October 2011 - Freeradius-Users - lists.freeradius.org

Failed to load module "jradius"
by Travis Dimmig 27 Oct '11

27 Oct '11

I don't seem to be able to get freeRadius to load the "jradius" module. My steps are as follows: wget ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-2.1.12.tar.gz tar -xzvf freeradius-server-2.1.12.tar.gz cd freeradius-server-2.1.12 echo "rlm_jradius" >> src/modules/stable ./configure && make && make install cp src/modules/rlm_jradius/jradius./conf /usr/local/etc/raddb I configure jradius.conf to point to my JRadius server, and add jradius to the accounting section of sites-enabled. "radiusd -X" gives: /usr/local/etc/raddb/sites-enabled/default[443]: Failed to load module "jradius". /usr/local/etc/raddb/sites-enabled/default[378]: Errors parsing accounting section. I have verified that the jradius libraries have been compiled and installed /usr/local/lib. I've managed to comile freeRadius with the jradius module before just fine.....not sure what the problem is now. Any help would be greatly appreciated. Travis Dimmig Software Development Specialist Impulse Point www.impulse.com<http://www.impulse.com>

2 2

FreeRadius + MySQL | radacct: Errors and Warnings
by Daniel Menezes 27 Oct '11

27 Oct '11

Hi all, First, sorry my bad English. I have a FreeRadius + MySQL setup with MikroTik as NAS. And a few days ago I have some warnings and errors in the log: Tue Oct 25 04:02:41 2011 : Info: Released IP xxx.xxx.xxx.xxx (did via-pppoe-01 cli xx:xx:xx:xx:xx:xx user dmnzs-test) Tue Oct 25 05:30:36 2011 : Error: Received conflicting packet from client my-pppoe-01 port 39595 - ID: 75 due to unfinished request 625066. Giving up on old request. Tue Oct 25 15:43:20 2011 : Error: WARNING: Unresponsive child for request 784, in module radutmp component accounting I read something about slow backend, tables indexes and other things. I've used the backend script 'mysqltuner.pl' to adjust the performance. It's better now, but the warnings and erros persists. Can anyone help me on this? Thanks in advance. Sds, --- Daniel Menezes

5 14

PEAP with Machine auth
by Bonald 27 Oct '11

27 Oct '11

Hi, I've spent too much time trying to fix this issue and going nowhere... I am trying to make MACHINE auth working on Windows/CiscoWLC and Freeradius. I have no problem with USER auth. The certificate is fine, I've created it using xpextension. I've also tried a Windows-CA certificate. I've also tried MACHINE auth with IAS and it's working. I've upgraded the WLC to 7.0.0.116, I was at 6.0.199-4 before. Why is it working with USER auth but not MACHINE auth ? Could someone give me some direction ? Thanks! Here's some logs: rad_recv: Access-Request packet from host 10.10.1.1 port 32770, id=58, length=280 User-Name = "host/MININT-EC23NBT.domain.local" Calling-Station-Id = "b4-74-9f-9d-55-fb" Called-Station-Id = "00-25-84-23-52-60:SSID--Secure" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0132800a0000005618faa74e" NAS-IP-Address = 10.10.1.1 NAS-Identifier = "Controller-WLC2125" Airespace-Wlan-Id = 5 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202002801686f73742f4d494e494e542d454332334e42542e6373646573696c65732e71632e6361 Message-Authenticator = 0x5b1e2e25b76f1f348cb1bb62b94b2d43 server peap { # Executing section authorize from file /etc/raddb/sites-enabled/peap +- entering group authorize {...} [suffix] No '@' in User-Name = "host/MININT-EC23NBT.domain.local", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 2 length 40 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/peap +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled } # server peap Sending Access-Challenge of id 58 to 10.10.1.1 port 32770 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd4ade9e4d4aef086c00dbb7516145db0 Finished request 232. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.1.1 port 32770, id=59, length=395 User-Name = "host/MININT-EC23NBT.domain.local" Calling-Station-Id = "b4-74-9f-9d-55-fb" Called-Station-Id = "00-25-84-23-52-60:SSID--Secure" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0132800a0000005618faa74e" NAS-IP-Address = 10.10.1.1 NAS-Identifier = "Controller-WLC2125" Airespace-Wlan-Id = 5 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0203008919800000007f160301007a0100007603014ea7fa1c69583120e18e33c7779ea4d03e42e8b960079d8f36ab746be5bb345a20512d0000ccfbf8a28c0c5d27fb46eac23b913c638cc133e76aa06671c2dca9bd0018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100 State = 0xd4ade9e4d4aef086c00dbb7516145db0 Message-Authenticator = 0xde1ff14a20623ba0cc79cb552d264947 server peap { # Executing section authorize from file /etc/raddb/sites-enabled/peap +- entering group authorize {...} [suffix] No '@' in User-Name = "host/MININT-EC23NBT.domain.local", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 3 length 137 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/peap +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 127 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 007a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 037c], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server peap Sending Access-Challenge of id 59 to 10.10.1.1 port 32770 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xba37da6f48fb4f6aec7fee62fe06d36a11c2a13f94f188c1165c2ea8d0865cd5283462ec76c3de3df37967d94d9224425b8ea7921f8033711b4430ef1943ff29db366b7a0e6bdab6ddcdede222e7f3642fb886a3eea1316ed7ede26b8aa1dcdc7b4bcb6fefae97ba9c0eec9750bd45cf29e93be3b58b2534ba203f11b9e9a4b05980c844cebf79044f17f3f08797d9b912de8fc1cec712e42c2c87189817d456bcb3469c0043306504f2d58e779fc810a75d8d5784b54ce4c351188d50cd052b618d28d0461516030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd4ade9e4d5a9f086c00dbb7516145db0 Finished request 233. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.1.1 port 32770, id=60, length=264 User-Name = "host/MININT-EC23NBT.domain.local" Calling-Station-Id = "b4-74-9f-9d-55-fb" Called-Station-Id = "00-25-84-23-52-60:SSID--Secure" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0132800a0000005618faa74e" NAS-IP-Address = 10.10.1.1 NAS-Identifier = "Controller-WLC2125" Airespace-Wlan-Id = 5 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020400061900 State = 0xd4ade9e4d5a9f086c00dbb7516145db0 Message-Authenticator = 0x3f92eaba33074a895121d2885b384802 server peap { # Executing section authorize from file /etc/raddb/sites-enabled/peap +- entering group authorize {...} [suffix] No '@' in User-Name = "host/MININT-EC23NBT.domain.local", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/peap +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server peap Sending Access-Challenge of id 60 to 10.10.1.1 port 32770 EAP-Message = 0x010500061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd4ade9e4d6a8f086c00dbb7516145db0 Finished request 234. Going to the next request Waking up in 4.9 seconds. Cleaning up request 232 ID 58 with timestamp +4714 Cleaning up request 233 ID 59 with timestamp +4714 Cleaning up request 234 ID 60 with timestamp +4714 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xd4ade9e4d6a8f086 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests.

6 24

systemd and FreeRADIUS
by Stefan Winter 27 Oct '11

27 Oct '11

Hi, seems like openSUSE is going the fancy way and throws good old INIT overboard with their next release. System initialisation and housekeeping is changing towards systemd instead. So, in 20-something days I'll try to get my first FreeRADIUS running on that, and can't use my good old init scripts any more (I guess I could with some systemd-to-INIT legacy support, but I like eating fresh dogfood). Is there already someone working on systemd description files for FreeRADIUS? If not, I'll (have to :-) ) give it a go myself... Greetings, Stefan Winter -- Stefan WINTER Ingenieur de Recherche Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche 6, rue Richard Coudenhove-Kalergi L-1359 Luxembourg Tel: +352 424409 1 Fax: +352 422473

3 2

Sending accounting packets to more than one server?
by Tim McNabb 27 Oct '11

27 Oct '11

Hi there! I'm running FreeRADIUS 2.1.7, I was wondering if it is possible to forward accounting packets to another server while also keeping the packets on the local machine. I'm working on integrating a Netsweeper appliance and the company is saying that I need to forward accounting packets to the appliance in order for it to set policies correctly. Has anyone ever done this or would be willing to forward some good documentation on how this can be done? Thanks in advance, -Tim

6 12

Freeradius mysql acct copy
by Alexander Kosykh 27 Oct '11

27 Oct '11

Hi. I need to copy acct packets to my billing server and save acct in standart freeradius radacct table in mysql. I'm saving acct in radacct table now, but can't duplicate them to other (billing) radius server. I've tried to use copy-acct-to-home-server but no success. As I understand, virtual server from copy-acct-to-home-server use a detail files to read acct information from default server. Is the way to don't use detail file and use mysql? Regards, Alexander.

4 6

How to configure proxy server to send a copy of acct to remote/home server
by Difan Zhao 27 Oct '11

27 Oct '11

Dear experts, I configured my Freeradius2.1.7 server to be a proxy server which will forward the PEAP authentication packages to a remote server. The authentication part works great. I configured my switch to send accounting information to the proxy server. The proxy server is using MySQL to store the acct info. This part works fine too. However I'm requested to also send a copy of the acct info to the remote server... I'm still checking my switch (Cisco) and see if it can send two copies of acct info to two different servers at the same time. However, is it possible to make FreeRadius to automatically forward a copy to the remote server?? Thanks! Difan Zhao, M.Eng Network Engineer Guest-Tek Interactive Entertainment Inc. Email: difan.zhao(a)guest-tek.com Office: +1 (403) 509 1010 ext 3048 Cell: +1 (403) 689 7514 www.guest-tek.com INTERNET | MEDIA | VOICE The contents of this email are confidential and intended for the recipient only. If you have received this email in error, please notify us, and destroy all copies.

3 2

Why is not writting in second detail file?
by tonimanel 27 Oct '11

27 Oct '11

I have defined a second detail file writer that functions correct writting a second file. When I define in radiusd.conf this code: server radiusB { listen { type = detail filename = /var/log/freeradius/radacct/second_detail load_factor = 25 } preacct { preprocess suffix } accounting { ok } pre-proxy { } post-proxy { } } Writer doesn't writes to the file. I don't know why. If I comment the previous code, function correctly. I have configured in proxy.conf my home server. So, when reader try to reads records from second detail file, this file not exists. Output: FreeRADIUS Version 2.1.10, for host i486-pc-linux-gnu, built on Nov 14 2010 at 20:41:03 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/detail_ori including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server replicatedRadius { # from file /etc/freeradius/radiusd.conf modules { Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_always Module: Instantiating module "ok" from file /etc/freeradius/modules/always always ok { rcode = "ok" simulcount = 0 mpp = no } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "radpass" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = yes deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Read entry nasname=192.168.1.7,shortname=localpc,secret=machine rlm_sql (sql): Adding client 192.168.1.7 (localpc, server=<none>) to clients list rlm_sql (sql): Read entry nasname=192.168.1.163,shortname=kioscopc,secret=kioscos rlm_sql (sql): Adding client 192.168.1.163 (kioscopc, server=<none>) to clients list rlm_sql (sql): Released sql socket id: 4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail_ori detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "second_detail" from file /etc/freeradius/modules/detail detail second_detail { detailfile = "/var/log/freeradius/radacct/second_detail" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "detail" listen { filename = "/var/log/freeradius/radacct/second_detail" load_factor = 25 poll_interval = 1 retry_interval = 30 } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on detail file /var/log/freeradius/radacct/second_detail as server replicatedRadius Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.000000 sec Listening on proxy address * port 1814 Waking up in 0.9 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.826187 sec Waking up in 0.8 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.880263 sec Waking up in 0.8 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.976768 sec Waking up in 0.9 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.845203 sec Waking up in 0.8 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.224813 sec Waking up in 1.2 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.246018 sec Waking up in 1.2 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.151570 sec Waking up in 1.1 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.961201 sec Waking up in 0.9 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.793563 sec Waking up in 0.7 seconds. rad_recv: Access-Request packet from host 192.168.1.7 port 64638, id=36, length=118 User-Name = "probador" Acct-Session-Id = "1319530770S3ane" NAS-IP-Address = 127.0.0.1 NAS-Identifier = "Localhost" NAS-Port = 0 Calling-Station-Id = "1115551212" User-Password = "probadorpass" Message-Authenticator = 0x2288b8da08cda6df3e989c63e561cc61 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "probador", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> probador [sql] sql_set_user escaped user --> 'probador' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'probador' ORDER BY id WARNING: Found User-Password == "...". WARNING: Are you sure you don't mean Cleartext-Password? WARNING: See "man rlm_pap" for more information. [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'probador' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'probador' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! # Executing group from file /etc/freeradius/sites-enabled/default +- entering group PAP {...} [pap] login attempt with password "probadorpass" [pap] Using clear text password "probadorpass" [pap] User authenticated successfully ++[pap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 36 to 192.168.1.7 port 64638 Finished request 0. Going to the next request Waking up in 0.6 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.885732 sec Waking up in 0.8 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.912520 sec Waking up in 0.9 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.193714 sec Waking up in 1.1 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.805761 sec Waking up in 0.8 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.145429 sec Waking up in 0.5 seconds. Cleaning up request 0 ID 36 with timestamp +9 Waking up in 0.6 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.955676 sec Waking up in 0.9 seconds. rad_recv: Accounting-Request packet from host 192.168.1.7 port 64639, id=37, length=101 User-Name = "probador" Acct-Session-Id = "1319530776V34yzo" NAS-IP-Address = 127.0.0.1 NAS-Identifier = "Localhost" NAS-Port = 0 Calling-Station-Id = "1115551212" Acct-Status-Type = Stop Acct-Session-Time = 180 Acct-Delay-Time = 1 # Executing section preacct from file /etc/freeradius/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 192.168.1.7,NAS-IP-Address = 127.0.0.1,Acct-Session-Id = "1319530776V34yzo",User-Name = "probador"' [acct_unique] Acct-Unique-Session-ID = "7fca33c18994b4b7". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "probador", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /etc/freeradius/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.1.7/detail-20111025 [detail] /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.7/detail-20111025 [detail] expand: %t -> Tue Oct 25 10:19:36 2011 ++[detail] returns ok [second_detail] expand: /var/log/freeradius/radacct/second_detail -> /var/log/freeradius/radacct/second_detail [second_detail] /var/log/freeradius/radacct/second_detail expands to /var/log/freeradius/radacct/second_detail [second_detail] expand: %t -> Tue Oct 25 10:19:36 2011 ++[second_detail] returns ok ++[unix] returns ok [radutmp] expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp [radutmp] expand: %{User-Name} -> probador rlm_radutmp: Logout for NAS 127.0.0.1 port 0, but no Login record ++[radutmp] returns ok [sql] expand: %{User-Name} -> probador [sql] sql_set_user escaped user --> 'probador' [sql] expand: %{Acct-Input-Gigawords} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Input-Octets} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Output-Gigawords} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Output-Octets} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Delay-Time} -> 1 [sql] expand: UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}' -> UPDATE radacct SET acctstoptime = '2011-10-25 10:19:36', acctsessiontime = '180', acctinputoctets = '0' << 32 | '0', acctoutputoctets = '0' << 32 | rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: %{Acct-Session-Time} -> 180 [sql] expand: %{Acct-Delay-Time} -> 1 [sql] expand: %{Acct-Input-Gigawords} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Input-Octets} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Output-Gigawords} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Output-Octets} -> [sql] ... expanding second conditional [sql] expand: %{Acct-Delay-Time} -> 1 [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Inpu rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[exec] returns noop [attr_filter.accounting_response] expand: %{User-Name} -> probador attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 37 to 192.168.1.7 port 64639 Finished request 1. Cleaning up request 1 ID 37 with timestamp +16 Going to the next request Waking up in 0.3 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail - Renaming /var/log/freeradius/radacct/second_detail -> /var/log/freeradius/radacct/second_detail.work detail_recv: Read packet from /var/log/freeradius/radacct/second_detail.work User-Name = "probador" Acct-Session-Id = "1319530776V34yzo" NAS-IP-Address = 127.0.0.1 NAS-Identifier = "Localhost" NAS-Port = 0 Calling-Station-Id = "1115551212" Acct-Status-Type = Stop Acct-Session-Time = 180 Acct-Delay-Time = 1 Acct-Unique-Session-Id = "7fca33c18994b4b7" Packet-Original-Timestamp = "Oct 25 2011 10:19:36 CEST" Packet-Transmit-Counter = 1 server replicatedRadius { # Executing section preacct from file /etc/freeradius/radiusd.conf +- entering group preacct {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "probador", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop # Executing section accounting from file /etc/freeradius/radiusd.conf +- entering group accounting {...} ++[ok] returns ok } # server replicatedRadius Finished request 2. Cleaning up request 2 ID 6568 with timestamp +16 Going to the next request Detail listener /var/log/freeradius/radacct/second_detail state replied signalled 0 waiting 0.001929 sec Detail - unlinking /var/log/freeradius/radacct/second_detail.work Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.811150 sec Waking up in 0.8 seconds. Waking up in 0.8 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.170832 sec Waking up in 1.1 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 0.852104 sec Waking up in 0.8 seconds. Polling for detail file /var/log/freeradius/radacct/second_detail Detail listener /var/log/freeradius/radacct/second_detail state unopened signalled 0 waiting 1.081467 sec Waking up in 1.0 seconds. Can you help me? Thanks. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Why-is-not-writting-in-second-detai… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 11

Enabling login access and denied to be logged in radius log file
by Det Det 27 Oct '11

27 Oct '11

Hi, How do i enable logging of user accept and deny logins in log file? I tried to put sql_log in post-auth but didn't work. thanks! det

1 1

Authorize all/any users for a PEAP, WPA2 enterprise setup
by Toby 26 Oct '11

26 Oct '11

Hi all, I apologize in advance if this question has been answered previously but I have searched extensively and cannot find discussion of this particular topic. What I am wanting to setup, at least initially, is a WPA2 enterprise (802.11i) wireless access point that will authorize ANY user (accept all credentials/username-password combinations) and thereby provide encrypted wireless access as well as confirmation of the access point's identity, but not restrict which users can connect. I have the system/network/freeradius server running and authentication works if a specific username and password is supplied (eg. 'testuser Cleartext-Password := "testpass"' in users file will allow username 'testuser' with password 'testpass' to connect) or with any username and a specific password (eg. 'DEFAULT Cleartext-Password := "testpass" in the users file will allow any username that provides the password 'testpass' to connect). However, I have tried various options and cannot find a way to achieve my goal of any username with any password being accepted. I have not yet attempted to setup a database and modify SQL queries to always return true or perform the equivalent with shell scripts as it seems that a simple, single line in the users file should be able to do the job. (With only a little research done it appears that both the SQL and shell script options would be possible [would they?] but both seem unnecessarily complex for this) Some options I have tried in the users file are: DEFAULT Cleartext-Password := "testpass" # works for any username and the password "testpass" DEFAULT User-Password := "testpass" # as above (and as expected) works for any username with the password "testpass" DEFAULT Cleartext-Password =* "testpass" # doesn't work, trying to accept any password; from the users man page "Attribute =* Value As a check item, it matches if the request contains the named attribute, no matter what the value is." ==> request doesn't contain the named attribute 'Cleartext-Password'?! DEFAULT Cleartext-Password !~ /1mp0ss1ble/ # doesn't work - in the hope of accepting if password provided is NOT "1mp0ss1ble"; "Attribute !~ Expression As a check item, it matches if the request contains an attribute which does not match the given regular expression." DEFAULT Cleartext-Password =~ /.*/ # doesn't work - in the hope of accepting any user if any password is provided; "Attribute =~ Expression As a check item, it matches if the request contains an attribute which matches the given regular expression." DEFAULT Cleartext-Password > "" # doesn't work - in the hope that ANY password would be > ""; "Attribute > Value As a check item, it matches if the request contains an attribute with a value greater than the one given." For what it's worth the users manpage to which I refer is http://freeradius.org/radiusd/man/users.html#lbAE. I have also tried "DEFAULT Auth-Type := Accept" [despite having read in advance that this shouldn't work - indeed it doesn't/didn't!] This problem is (apparently) not related to certificates or Windows XP not working (as appears to be the most commonly encountered problem around this topic - I am not using Windows). The setup DOES work with any username as long as a password is explicitly specified in the users file. Some keywords to aid others who might search for the same topic in future: wildcard password, regex password, regular expression And yes I am new to and inexperienced with RADIUS so please be gentle. And yes I expect I am missing something very simple - a config setting somewhere? I hope this is as trivial a problem as I expect it to be and someone out there will smile at my naivety and know the solution I'm looking for. Thanks in advance. Toby.

2 1