January 2012 - Freeradius-Users - lists.freeradius.org

rlm_eap_tls: authenticate instead of authorize?
by Graham Leggett 10 Jan '12

10 Jan '12

Hi all, I notice that when rlm_eap_tls checks the user's certificate, it does so in the authenticate section instead of the authorize section, and in the process none of the fields in the certificate are available to other modules until post_auth. Would there be any ill effects if the rlm_eap_tls certificate parsing was moved from the authenticate section to the authorize section? Regards, Graham --

2 2

Connecting Windows XP wirelessly with EAP TKIP
by McSparin, Joe 09 Jan '12

09 Jan '12

Is there anything special that needs to be done on windows XP to connect wirelessly to an access point using FreeRadius. I was connecting fine with Windows 7 but now tryng to connect windows XP there is nothing even triggering the Radius server I am running in radiusd -X and when I connect the xp box nothing even happens. Anyone ever seen this before? Thanks, Joseph R. McSparin Network Administrator Hill Country Memorial Hospital 830 990 6638 phone 830 990 6623 fax jmcsparin(a)hillcountrymemorial.org -- This email message and any attachments are for the sole use of the intended recipient(s) and contain confidential and/or privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message and any attachments.

3 4

WPA Enterprise Certificate renewal for FreeRadius
by Mike Diggins 09 Jan '12

09 Jan '12

I use a Thawte Premium Server CA for my WPA2 Enterprise freeradius authentication certificate currently. My eap.conf 'certificate file' contains the certificate only, not the root and/or intermediates. That seems to be ok, since most clients already have the Thawte Root certificate installed. I renewed the new certificate just recently and discovered that Thawte is no longer issuing certificates under the old root so my clients will likely be asked to trust the new certificate when I install it. All my documentation changes as well but that's another story. My question is, what is the value of adding the roots/intermediates to the certificate file i.e certificate_file = ${certdir}/certificate.crt? Does it really allow a client without the Root already installed to verify this certificate? -Mike

4 6

Samba + Radius
by Szilard Gyorgy 09 Jan '12

09 Jan '12

Hi I have one group of samba servers what I try to configure to auth. the windows 7 workstations using one central radius server. I found documentation about how to make other way around - like radius to use samba or krb database, but I don't want that – (In the next stage this radius server will be used by other network equipment too - so I don’t want my Cisco router to use samba database for auth :) ) Is any way how can I configure my samba servers to use one radius auth server ? Thank You, Szilard Gyorgy

2 1

Modify request before proxying
by Lorenzo 09 Jan '12

09 Jan '12

Dear Freeradius experts, Is there any way to apply ttls to non-tunneled requests before proxying them? Thanks. Lorenzo -- View this message in context: http://freeradius.1045715.n5.nabble.com/Modify-request-before-proxying-tp51… Sent from the FreeRadius - User mailing list archive at Nabble.com.

4 3

no calling-station-id received
by S Adrian 09 Jan '12

09 Jan '12

Hey everybody .... I don't seem to get a calling-station-id packet when a username is trying to connect. I'm running gentoo and have the following package versions: net-dialup/ppp-2.4.5-r1 USE="activefilter atm dhcp eap-tls pam radius -gtk -ipv6" 0 kB net-dialup/rp-pppoe-3.10-r1 USE="-X" 0 kB net-dialup/freeradius-2.1.7 USE="mysql pam ssl threads udpfromto -bindist -debug -edirectory (-firebird) -frascend -frxp -kerberos -ldap -postgres -snmp" 0 kB Another problem I seem to have is people using the same pool_key in my radippool table :/ Where should I start digging ? Thanks in advance.

4 8

Support for check_cert_subjectAltName?
by Graham Leggett 09 Jan '12

09 Jan '12

Hi all, When using client certificates in EAP-TLS, the check_cert_cn option exists that allows you to check that the username matches the CN. Is there a corresponding option somewhere that will allow you to verify the User-Name against the subjectAltName instead? Regards, Graham --

3 5

Proxying to a virtual server through unlang?
by Arnaud Loonstra 09 Jan '12

09 Jan '12

Hi All, I'm trying to get into the unlang world since it seems really powerful but I can't get my hands around a simple virtual server switching scenario. I basically want to switch to a virtual server based on some attributes, Service-Type for instance. This is because on some network hardware I can't add a radius server for every type of authentication. So everything (802.1x, mac-auth, prompt auth goes to the same server) I found a thread suggesting to do the following: (http://freeradius.1045715.n5.nabble.com/virtual-servers-tt2769141.html) authorize { switch "Service-Type" { #MAC authentication case 'Call-Check' { update control { server[mac-auth] } } #NAS console authentication case 'NAS-Prompt-User' { update control { server[mac-auth] } } } } This works as the debug logs shows: # Executing section authorize from file /etc/freeradius/sites-enabled/nas-auth However it only executes the authorize section of the nas-auth virtual server. I could create realms for the virtual servers and proxy to them by using Proxy-To-Realm := "mac-auth" instead of the server[] directive. But I kind of liked the minimal unlang approach. Is there any good way of accomplishing this purely with unlang or is it still best to use the proxying approach using realms? Here's a log of the process. As you can see it only issues the authorize section of the nas-auth virtual server as apposed to going through the full server when using Proxy-To-Realm. rad_recv: Access-Request packet from host 10.6.254.62 port 1025, id=152, length=95 User-Name = "testusr" User-Password = "testpwd" NAS-IP-Address = 10.6.254.62 NAS-Identifier = "ST-AN07258-412" NAS-Port-Type = Virtual Service-Type = NAS-Prompt-User Message-Authenticator = 0x63ee5e1b0f7b81e883780f9e57c2941c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++- entering switch Service-Type {...} +++- entering case NAS-Prompt-User {...} server nas-auth { # nested call # Executing section authorize from file /etc/freeradius/sites-enabled/nas-auth +- entering group authorize {...} ++? if (Service-Type == 'NAS-Prompt-User') ? Evaluating (Service-Type == 'NAS-Prompt-User') -> TRUE ++? if (Service-Type == 'NAS-Prompt-User') -> TRUE ++- entering if (Service-Type == 'NAS-Prompt-User') {...} [edir-ldap] performing user authorization for testusr [edir-ldap] expand: %{Stripped-User-Name} -> [edir-ldap] ... expanding second conditional [edir-ldap] expand: %{User-Name} -> testusr [edir-ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=testusr) [edir-ldap] expand: ou=users,o=radius -> ou=users,o=radius [edir-ldap] ldap_get_conn: Checking Id: 0 [edir-ldap] ldap_get_conn: Got Id: 0 [edir-ldap] performing search in ou=users,o=radius, with filter (cn=testusr) [edir-ldap] checking if remote access for testusr is allowed by cn [edir-ldap] Added the eDirectory password testpwd in check items as Cleartext-Password [edir-ldap] No default NMAS login sequence [edir-ldap] looking for check items in directory... [edir-ldap] looking for reply items in directory... [edir-ldap] user testusr authorized to use remote access [edir-ldap] ldap_release_conn: Release Id: 0 +++[edir-ldap] returns ok ++- if (Service-Type == 'NAS-Prompt-User') returns ok ++ ... skipping else for request 4: Preceding "if" was taken } # server nas-auth with nested call ++++[server[nas-auth]] returns ok +++- case NAS-Prompt-User returns ok ++- switch Service-Type returns ok WARNING: Please update your configuration, and remove 'Auth-Type = Local' WARNING: Use the PAP or CHAP modules instead. User-Password in the request is correct. Login OK: [testusr] (from client primary-network port 0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop ++? if ("%{request:Calling-Station-Id}" =~ /^([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2})$/i ) expand: %{request:Calling-Station-Id} -> ? Evaluating ("%{request:Calling-Station-Id}" =~ /^([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2})$/i) -> FALSE ++? if ("%{request:Calling-Station-Id}" =~ /^([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2}).?([0-9a-f]{2})$/i ) -> FALSE ++[callingstationid2vlanid] returns notfound ++? if (ok) ? Evaluating (ok) -> FALSE ++? if (ok) -> FALSE ++[reply] returns notfound Sending Access-Accept of id 152 to 10.6.254.62 port 1025 Service-Type = Framed-User Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "132" Rg, Arnaud-- Stichting z25.org Concordiastraat 67A 3551 EM Utrecht The Netherlands +31-(0)6-41861063

2 2

Dear Expert(Need assistance with Freeradius + openvpn consulting)
by sekchel lee 09 Jan '12

09 Jan '12

The expenses will be paid by US dollar. Current states and My Requirements Computer 1 (Freeradius server action) mysql db CentOS-6.0-x86_64 ssh port ready nas1 (openvpn server action ) ssh port ready CentOS-6.0-x86_64 openvpn user (mysql/ userid/password ==> Authentication ,Authorization,Accounting) action But UserDrop(disconnect) Function is no action My Requirements radius user drop Function (For openvpn user) F1) Max-All-Session(Time Limit (secs)) F2) Expiration (User Expiration Date ) I want radius user drop function (for openvpn user) F1) only F2) only F1) + F2) both ==> F1(O) F2(X) --> drop F1(X) F2(O) --> drop

3 2

How to subsiture an user password
by stefan＠martolvan.is 08 Jan '12

08 Jan '12

I have WiFi NAS tat sends me the mac address in both username and password, but my ldap has all mac addresses as uid with the same fixed password, where and how could I subsitute the password ? This is my radiusd -X output: FreeRADIUS Version 2.1.1, for host i686-suse-linux-gnu, built on Sep 27 2011 at 14:03:01 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/sql/mysql/counter.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "blakkur" nastype = "other" } client 192.168.nnn.0/24 { require_message_authenticator = no secret = "blakkur" shortname = "Wifi-net" } client 127.0.0.0/16 { require_message_authenticator = no secret = "blakkur" shortname = "prufa" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "ldap.my.school" port = 389 password = "password" identity = "cn=Administrator,dc=my,dc=school" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=people,dc=my,dc=school" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=simpleSecurityObject)" password_attribute = "Cleartext-Password" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0xb79e0318 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } [/etc/raddb/users]:197 WARNING! Changing 'Service-Type =' to 'Service-Type ==' for comparing RADIUS attribute in check item list for user DEFAULT Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.nnn.240 port 32768, id=92, length=151 Service-Type = Login-User Framed-MTU = 1250 User-Name = "1887961dc817" User-Password = "1887961dc817" Calling-Station-Id = "1887961DC817" Called-Station-Id = "00900B216A9E" Connect-Info = "CONNECT Unknown Radio" NAS-IP-Address = 192.168.nnn.240 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Message-Authenticator = 0xfa9a82b813a8c789b5d0072f30432f14 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "1887961dc817", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 197 ++[files] returns ok [ldap] performing user authorization for 1887961dc817 [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=1887961dc817) [ldap] expand: ou=people,dc=my,dc=school -> ou=people,dc=my,dc=school rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to ldap.my.school:389, authentication 0 rlm_ldap: bind as cn=Administrator,dc=my,dc=school/password to ldap.my.school:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=people,dc=my,dc=school, with filter (uid=1887961dc817) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] Setting Auth-Type = ldap [ldap] user 1887961dc817 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = ldap +- entering group authenticate {...} [ldap] login attempt by "1887961dc817" with password "1887961dc817" [ldap] user DN: uid=1887961dc817,uid=stefanb,ou=people,dc=my,dc=school rlm_ldap: (re)connect to ldap.my.school:389, authentication 1 rlm_ldap: bind as uid=1887961dc817,uid=stefanb,ou=people,dc=my,dc=school/1887961dc817 to ldap.my.school:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind failed with invalid credentials ++[ldap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> 1887961dc817 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 92 to 192.168.nnn.240 port 32768 rad_recv: Access-Request packet from host 192.168.nnn.240 port 32768, id=92, length=151 Sending duplicate reply to client Wifi-net port 32768 - ID: 92 Sending Access-Reject of id 92 to 192.168.nnn.240 port 32768 Waking up in 4.9 seconds. Cleaning up request 0 ID 92 with timestamp +8 Ready to process requests. Regards Stefan -- View this message in context: http://freeradius.1045715.n5.nabble.com/How-to-subsiture-an-user-password-t… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 3