July 2012 - Freeradius-Users - lists.freeradius.org

"Manual" certificate checking
by Sven Dreyer 09 Jul '12

09 Jul '12

Hi List, at work, I have the following requirements for IP phones which should be authenticated before joining the network: - Root CA --> Sub CA --> Device certificates - The phones have the Sub CA certificate locally installed as "trustworthy" (NOT the Root CA certificate!) - The RADIUS server must only send its server certificate (not the whole chain) - The phones only send their device certificate to the RADIUS server I tried to build this scenario with FreeRADIUS (2.1.10, on Debian), but got stuck at the following points: - I only put the RADIUS server certificate to certificate_file. But as soon as CA_path or CA_file are set, FreeRADIUS sends the whole certficiate chain to the phone. - As soon as I unset CA_path and CA_file, FreeRADIUS sends only the content of certificate_file to the phone, which is what I want. Of course, phone certificate checking then doesn't work anymore. - So I thought that I implement phone certificate checking using the "verify" block. But this only seems to work "on top" of the built-in certificate checking. Does anybody have a hint? Thanks, Sven

2 5

How to Disable on Iphone and MAC OSX Clients use of Certificates
by Nedi 09 Jul '12

09 Jul '12

Hi, I use on Bufallo Router the Freeradius Server future and all works well with Certificates, but sometimes after router reboot some clients can’t login in the Network if Certificate used. If I disable the certificate check on windows I can login without Certificate but on new Macbook and Iphone I can’t disable Certificate check. Has anyone idea what I can do? and is this dangerous to communicate in Wlan without Certificate check activated? Can the Wlan without use of Certificate easy be hacked? Best Regards Nedi -

2 1

problem with multiple ldap
by Prateek Kumar 09 Jul '12

09 Jul '12

Hi, I have configured freeradius to select ldap modules according to NAS-IP-Address so clients (using PEAP/MSCHAPv2) associating to particular AP should only get authenticated. For that I did changes as: 1. modules/ldap file -------------------------- ldap HR { ou=HR,dc=prateek,dc=com ... } ldap dev { ou=dev,dc=prateek,dc=com ... } 2. In ldap.attrmap ------------------- checkItem Cleartext-Password userPassword := 3. In both sites-available/default & sites-available/inner-tunnel ------------------------------ -------------------------------------- a. in authorize section if (NAS-IP-Address == 127.0.0.1) { HR } else { dev } b. in authenticate section have uncommented Auth-Type MS-CHAP { mschap } Now when I use eapol_test to test I get Success.. It first checks HR which returns search failed as there is no user in ou=HR but when freeradius processes the inner-tunnel I get the message ++? if (NAS-IP-Address == 127.0.0.1) (Attribute NAS-IP-Address was not found) ++- entering else else {...} And after that user "dave" is getting authenticated who should not get authenticated. I want to know that why it didn't get NAS-IP-Adderss. Is there some thing I have missed ? Regards, Prateek radiusd -X ( Deleating some EAP messages ) rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=0, length=116 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020000090164617665 Message-Authenticator = 0x1eb24decc31fcd482762d37920cb6f5d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 127.0.0.1:389, authentication 0 rlm_ldap: bind as cn=Administrator,dc=prateek,dc=com/mypass to 127.0.0.1:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 0: Preceding "if" was taken [eap] EAP packet type response id 0 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[daily] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 127.0.0.1 port 46032 EAP-Message = 0x010100060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a099cf6a77937551a6a21d9f Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=1, length=131 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100060319 State = 0xa098c2e9a099cf6a77937551a6a21d9f Message-Authenticator = 0xb0f144be9973b7716b25f5b7a09ffd9c +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 1: Preceding "if" was taken [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[daily] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 127.0.0.1 port 46032 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a19adb6a77937551a6a21d9f Finished request 1. Going to the next request rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=2, length=242 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = some long value State = 0xa098c2e9a19adb6a77937551a6a21d9f Message-Authenticator = 0xabcfe03ec5688a184e25c56589ea8e2a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 2: Preceding "if" was taken [eap] EAP packet type response id 2 length 117 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 107 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0066], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0035], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0870], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 127.0.0.1 port 46032 EAP-Message = some value EAP-Message = " EAP-Message = " EAP-Message = " EAP-Message = 0xb70064119cfc40adfde72ecc Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a29bdb6a77937551a6a21d9f Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=3, length=131 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300061900 State = 0xa098c2e9a29bdb6a77937551a6a21d9f Message-Authenticator = 0xc7a295a94c264c2b101dabae43ad8557 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 3: Preceding "if" was taken [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 127.0.0.1 port 46032 EAP-Message = EAP-Message = EAP-Message = EAP-Message = EAP-Message = 0x30c3456c19147657 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a39cdb6a77937551a6a21d9f Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=4, length=131 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400061900 State = 0xa098c2e9a39cdb6a77937551a6a21d9f Message-Authenticator = 0x64a3ceaa178064f424d2830f6d59ade4 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 4: Preceding "if" was taken [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 127.0.0.1 port 46032 EAP-Message = EAP-Message = EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a49ddb6a77937551a6a21d9f Finished request 4. Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=5, length=333 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = State = 0xa098c2e9a49ddb6a77937551a6a21d9f Message-Authenticator = 0xa3cadaf5d585e4499d7e2d587f9924ae +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 5: Preceding "if" was taken [eap] EAP packet type response id 5 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 Handshake [length 00aa]??? [peap] TLS_accept: SSLv3 write session ticket A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 5 to 127.0.0.1 port 46032 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a59edb6a77937551a6a21d9f Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=6, length=131 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020600061900 State = 0xa098c2e9a59edb6a77937551a6a21d9f Message-Authenticator = 0x7aeef64b2758737cbc8720c0dafbeca6 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=0, length=116 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020000090164617665 Message-Authenticator = 0x1eb24decc31fcd482762d37920cb6f5d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 127.0.0.1:389, authentication 0 rlm_ldap: bind as cn=Administrator,dc=prateek,dc=com/mypass to 127.0.0.1:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 0: Preceding "if" was taken [eap] EAP packet type response id 0 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop rlm_counter: Entering module authorize code Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = State = 0xa098c2e9a69fdb6a77937551a6a21d9f Message-Authenticator = 0x91d0e9b22d3e6b84caf5e58aeae97b9b +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 7: Preceding "if" was taken [eap] EAP packet type response id 7 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - dave [peap] Got tunneled request EAP-Message = 0x020700090164617665 server { PEAP: Got tunneled identity of dave PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to dave Sending tunneled request EAP-Message = 0x020700090164617665 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "dave" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop ++? if (NAS-IP-Address == 127.0.0.1) (Attribute NAS-IP-Address was not found) <----------------------------------------------------------------- ++- entering else else {...} [dev] performing user authorization for dave [dev] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [dev] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [dev] expand: ou=development,dc=prateek,dc=com -> ou=development,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 127.0.0.1:389, authentication 0 rlm_ldap: bind as cn=Administrator,dc=prateek,dc=com/mypass to 127.0.0.1:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=development,dc=prateek,dc=com, with filter (uid=dave) [dev] No default NMAS login sequence [dev] looking for check items in directory... rlm_ldap: userPassword -> Cleartext-Password := "davesecret" [dev] looking for reply items in directory... [dev] user dave authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[dev] returns ok ++- else else returns ok [eap] EAP packet type response id 7 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1b9d7bc71b9561595ab9d2c73552e623 [peap] Got tunneled reply RADIUS code 11 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1b9d7bc71b9561595ab9d2c73552e623 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 7 to 127.0.0.1 port 46032 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a790db6a77937551a6a21d9f Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=8, length=269 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = State = 0xa098c2e9a790db6a77937551a6a21d9f Message-Authenticator = 0x5b313677254c02c3556f0d2067e4922d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 8: Preceding "if" was taken [eap] EAP packet type response id 8 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = server { PEAP: Setting User-Name to dave Sending tunneled request EAP-Message = FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "dave" State = 0x1b9d7bc71b9561595ab9d2c73552e623 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop ++? if (NAS-IP-Address == 127.0.0.1) (Attribute NAS-IP-Address was not found) <------------------------------------------------------------------------------------------- ++- entering else else {...} [dev] performing user authorization for dave [dev] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [dev] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [dev] expand: ou=development,dc=prateek,dc=com -> ou=development,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=development,dc=prateek,dc=com, with filter (uid=dave) [dev] No default NMAS login sequence [dev] looking for check items in directory... rlm_ldap: userPassword -> Cleartext-Password := "davesecret" [dev] looking for reply items in directory... [dev] user dave authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[dev] returns ok ++- else else returns ok [eap] EAP packet type response id 8 length 63 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv2 for dave with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1b9d7bc71a9461595ab9d2c73552e623 [peap] Got tunneled reply RADIUS code 11 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1b9d7bc71a9461595ab9d2c73552e623 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 8 to 127.0.0.1 port 46032 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a891db6a77937551a6a21d9f Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=9, length=205 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = Message-Authenticator = 0x1e2153de29daf702780bb061ae5a1281 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 9: Preceding "if" was taken [eap] EAP packet type response id 9 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020900061a03 server { PEAP: Setting User-Name to dave Sending tunneled request EAP-Message = 0x020900061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "dave" State = 0x1b9d7bc71a9461595ab9d2c73552e623 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop ++? if (NAS-IP-Address == 127.0.0.1) (Attribute NAS-IP-Address was not found) <----------------------------------------------------------------------------------------------------- ++- entering else else {...} [dev] performing user authorization for dave [dev] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [dev] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [dev] expand: ou=development,dc=prateek,dc=com -> ou=development,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=development,dc=prateek,dc=com, with filter (uid=dave) [dev] No default NMAS login sequence [dev] looking for check items in directory... rlm_ldap: userPassword -> Cleartext-Password := "davesecret" [dev] looking for reply items in directory... [dev] user dave authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[dev] returns ok ++- else else returns ok [eap] EAP packet type response id 9 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok } # server inner-tunnel [peap] Got tunneled reply code 2 EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "dave" [peap] Got tunneled reply RADIUS code 2 EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "dave" [peap] Tunneled authentication was successful. [peap] SUCCESS ++[eap] returns handled Sending Access-Challenge of id 9 to 127.0.0.1 port 46032 EAP-Message = Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa098c2e9a992db6a77937551a6a21d9f Finished request 9 rad_recv: Access-Request packet from host 127.0.0.1 port 46032, id=10, length=221 User-Name = "dave" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = Message-Authenticator = 0x8ab3c117c8c59031dd6294781bd2de68 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "dave", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++? if (NAS-IP-Address == 127.0.0.1) ? Evaluating (NAS-IP-Address == 127.0.0.1) -> TRUE ++? if (NAS-IP-Address == 127.0.0.1) -> TRUE ++- entering if (NAS-IP-Address == 127.0.0.1) {...} [HR] performing user authorization for dave [HR] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [HR] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=dave) [HR] expand: ou=HR,dc=prateek,dc=com -> ou=HR,dc=prateek,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=HR,dc=prateek,dc=com, with filter (uid=dave) rlm_ldap: object not found [HR] search failed rlm_ldap: ldap_release_conn: Release Id: 0 +++[HR] returns notfound ++- if (NAS-IP-Address == 127.0.0.1) returns notfound ++ ... skipping else for request 10: Preceding "if" was taken [eap] EAP packet type response id 10 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type p[peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Success [eap] Freeing handler ++[eap] returns ok +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 10 to 127.0.0.1 port 46032eap

2 2

2 Factor Authetication and EAP-GTC
by Carl Pierre 09 Jul '12

09 Jul '12

Hello: I have recently been made a part of a project in which we intend to use freeradius. So far, FR seems to be the ideal tool except for one small issue: 2-Factor Authentication. Try as I might, I cannot seem to find any way to set up a multi-factor solution using PEAP. So I suppose my question is this: has anyone had any luck using EAP and challenging the user to enter some sort of OTP? I know that EAP-GTC is meant to do this, but the meager documentation I have on it does not give too much detail. Regards

2 1

Re: problem with multiple ldap
by Alan Buxey 07 Jul '12

07 Jul '12

You don't have the preprocess module listed in inner-tunnel alan

1 0

IPv6 sql ippool
by Josip Almasi 06 Jul '12

06 Jul '12

Hi all, ippool can't handle IPv6 addresses, but sql ippool should be able to, right? At least in postgres, inet data type accepts both v4 and v6 addresses. Anyone using it? Any handy tools to fill the database/generate pool addresses? Any other hints? Regards...

1 0

LDAP authentication trouble on 3.0
by David Aldwinckle 06 Jul '12

06 Jul '12

Hello, I am having a problem getting LDAP authentication working on FreeRADIUS Version 3.0.0. The behaviour I am experiencing is that the server will send an Access-Accept message without doing any checking of credentials. I would expect to see an LDAP bind, but that does not occur. In the debug output, I see a FreeRadius preparing to proxy, but this never happens. I'm hoping that I've overlooked something simple, it has been a while since I've done a fresh install. Here are some relevant excerpts, followed by the startup debug and then a request. Any and all help is appreciated. raddb/proxy.conf: realm NULL { virtual_server = captive_portal } sites-enabled/captive_portal: server captive_portal { authorize { uw.ldap } authenticate { Auth-Type LDAP { uw.ldap } } } Starting debug output: FreeRADIUS Version 3.0.0, for host x86_64-unknown-linux-gnu, built on Jun 21 2012 at 16:59:04 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/wimax including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/inner-eap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/counter including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/attr_rewrite including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/checkval including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/cui including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/acct_unique including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/netid including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/captive_portal main { security { allow_core_dumps = no } } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 5 cleanup_delay = 5 max_requests = 128000 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com<http://example.com/> { auth_pool = my_auth_failover } realm NULL { virtual_server = captive_portal } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/mods-enabled/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/mods-enabled/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:- passchange { } allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/mods-enabled/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = yes lifetime = 24 max_entries = 10000 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } debug: Using cached TLS configuration from previous invocation Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/mods-enabled/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Loading virtual module acct_unique Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Loading virtual module remove_reply_message_if_eap Module: Linked to module rlm_always Module: Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } Module: Loading virtual module remove_reply_message_if_eap } # modules } # server server netid { # from file /etc/raddb/sites-enabled/netid modules { Module: Creating Auth-Type = LDAP Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_ldap Module: Instantiating module "netid1.ldap" from file /etc/raddb/mods-enabled/ldap ldap netid1.ldap { server = "<redacted>" port = 389 password = "<redacted>" identity = "<redacted>" net_timeout = 5 timeout = 4 timelimit = 3 /etc/raddb/mods-enabled/ldap[234]: "tls_mode" is deprecated. Please replace it with the up-to-date configuration tls_mode = no /etc/raddb/mods-enabled/ldap[234]: "start_tls" is deprecated. Please replace it with the up-to-date configuration start_tls = no /etc/raddb/mods-enabled/ldap[234]: "tls_require_cert" is deprecated. Please replace it with the up-to-date configuration tls_require_cert = "allow" basedn = "<redacted>" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "userPassword" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute netid1.ldap-Ldap-Group rlm_ldap: Registering ldap_groupcmp for netid1.ldap-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name netid1.ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1c37530 Module: Instantiating module "netid2.ldap" from file /etc/raddb/mods-enabled/ldap ldap netid2.ldap { server = "<redacted>" port = 389 password = "<redacted>" identity = "<redacted>" net_timeout = 5 timeout = 4 timelimit = 3 /etc/raddb/mods-enabled/ldap[257]: "tls_mode" is deprecated. Please replace it with the up-to-date configuration tls_mode = no /etc/raddb/mods-enabled/ldap[257]: "start_tls" is deprecated. Please replace it with the up-to-date configuration start_tls = no /etc/raddb/mods-enabled/ldap[257]: "tls_require_cert" is deprecated. Please replace it with the up-to-date configuration tls_require_cert = "allow" basedn = "<redacted>" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "userPassword" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute netid2.ldap-Ldap-Group rlm_ldap: Registering ldap_groupcmp for netid2.ldap-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name netid2.ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1c39a30 Module: Checking authorize {...} for more modules to load } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server server captive_portal { # from file /etc/raddb/sites-enabled/captive_portal modules { Module: Checking authenticate {...} for more modules to load Module: Instantiating module "uw.ldap" from file /etc/raddb/mods-enabled/ldap ldap uw.ldap { server = "<redacted>" port = 389 password = "<redacted>" identity = "<redacted>" net_timeout = 5 timeout = 4 timelimit = 3 /etc/raddb/mods-enabled/ldap[206]: "tls_mode" is deprecated. Please replace it with the up-to-date configuration tls_mode = no /etc/raddb/mods-enabled/ldap[206]: "start_tls" is deprecated. Please replace it with the up-to-date configuration start_tls = no /etc/raddb/mods-enabled/ldap[206]: "tls_require_cert" is deprecated. Please replace it with the up-to-date configuration tls_require_cert = "allow" basedn = "<redacted>" filter = "(samaccountname=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "userPassword" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(memberof=%{control:Ldap-UserDn})(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))" groupmembership_attribute = "memberof" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute uw.ldap-Ldap-Group rlm_ldap: Registering ldap_groupcmp for uw.ldap-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name uw.ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1c3cd80 Module: Checking authorize {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 max_pps = 0 } listen { type = "acct" ipaddr = * port = 0 max_pps = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 max_pps = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy address * port 1814 Listening on proxy address * port 1814 Ready to process requests. Request output: rad_recv: Access-Request packet from host 172.x.x.x port 33182, id=67, length=170 NAS-IP-Address = 172.x.x.x NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "123" User-Password = "123" Calling-Station-Id = "<redacted>" Called-Station-Id = "<redacted>" Framed-IP-Address = 172.21.13.175 Service-Type = Login-User Aruba-Essid-Name = "wireless" Aruba-Location-Id = "AP1" Aruba-AP-Group = "MC-std" Message-Authenticator = 0x44be431a401e9bd87f9afb5305eb49ce (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) group authorize { (0) - entering group authorize {...} (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix : No '@' in User-Name = "123", looking up realm NULL (0) suffix : Found realm "NULL" (0) suffix : Adding Stripped-User-Name = "123" (0) suffix : Adding Realm = "NULL" (0) suffix : Proxying request from user 123 to realm NULL (0) suffix : Preparing to proxy authentication request to realm "NULL" (0) [suffix] = updated (0) eap : No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) WARNING: Empty pre-proxy section. Using default return values. Proxying to virtual server captive_portal (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) group authorize { (0) - entering group authorize {...} (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix : Proxy reply, or no User-Name. Ignoring. (0) [suffix] = ok (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) Auth-Type = Accept, accepting the user (0) Login OK: [123] (from client wn-wc-phy-211-a port 0 cli C8BCC8ED2768) (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) group post-auth { (0) - entering group post-auth {...} (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) - entering policy remove_reply_message_if_eap {...} (0) ? if (reply:EAP-Message && reply:Reply-Message) (0) ? Evaluating (reply:EAP-Message ) -> FALSE (0) ? Skipping (reply:Reply-Message) (0) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE (0) else else { (0) - entering else else {...} (0) [noop] = noop (0) - else else returns noop (0) - policy remove_reply_message_if_eap returns noop Sending Access-Accept of id 67 to 172.x.x.x port 33182 (0) Finished request 0. This part confuses me: Proxying to virtual server captive_portal (0) # Executing section authorize from file /etc/raddb/sites-enabled/default Dave A.

3 4

Re: ntlm_auth "--require-membership-of" breaks eap-conversation
by Patrick Machauer 06 Jul '12

06 Jul '12

Yes, i get the Groupname out of the DB : Huntgroup-Name := "%{sql:select groupname from radhuntgroup where nasipaddress=\"%{NAS-IP-Address}\"}" mysql> select * from radhuntgroup; +----+---------------------------+----------------+-----------+ | id | groupname | nasipaddress | nasportid | +----+---------------------------+----------------+-----------+ ...... | 5 | adp.realm.de\wlan | 192.168.0.10 | 1 | | 6 | adp.realm.de\wlan | 192.168.0.11 | 1 | ...... +----+---------------------------+----------------+-----------+ 7 rows in set (0.00 sec) ... and it seems to work : [mschap] expand: --require-membership-of=%{Huntgroup-Name} -> --require-membership-of=adp.realm.de\wlan It even doesn't work if i write --require-membership-of="adp.realm.de\wlan" by hand in the mschap module. Mschap says successfull , eap-conversation aborts.... alan buxey <A.L.M.Buxey(a)lboro.ac.uk> hat am 5. Juli 2012 um 13:38 geschrieben: > Hi, > > > --require-membership-of="%{Huntgroup-Name}" > > ? > > alan Patrick Machauer Rechenzentrum Duale Hochschule Baden-Württemberg Mannheim Baden-Wuerttemberg Cooperative State University Mannheim Rechenzentrum Coblitzallee 1-9 68163 Mannheim Tel.: +49 (0)621 4105 - 1278 Fax: +49 (0)621 4105 - 1278 E-Mail: machauer(a)dhbw-mannheim.de <mailto:machauer@dhbw-mannheim.de> Web: http://www.rz.dhbw-mannheim.de <http://www.rz.dhbw-mannheim.de> [Logo DHBW Mannheim]

2 1

Stuck with exec script from radgroupreply sql table
by Stefan König 05 Jul '12

05 Jul '12

Hello List, I am stuck with executing a script from my radgroupreply sql table and hope someone can point me into the right direction, as I have been fiddling around with this for days and lost my way. I want to set a dynamic "Session-Timeout" for certain groups. For testing purposes I created a TESTGROUP in the database table radgroupreply with an entry like this: id GroupName Attribute Value op 263 TESTGROUP Session-Timeout `%{exec:/var/skripte/test.sh}` == my test.sh looks like this: #!/bin/bash logger "done" echo 99999 When I start radiusd in debug mode everything looks good, the user is found, the group is found, then the script is executed. But then there is no "exec output"... I am sure I am missing a crucial step! Hope someone can help. Here is the log output: [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'testradius' ORDER BY id [sql] expand: SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM usergroup WHERE username = 'testradius' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'TESTGROUP' ORDER BY id [sql] User found in group TESTGROUP [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'TESTGROUP' ORDER BY id [sql] Executing /var/skripte/test.sh [sql] result 0 [sql] expand: %{exec:/var/skripte/test.sh} -> rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop User-Password in the request is correct. Login OK: [testradius] (from client LOCALHOST_TESTING port 1234) # Executing section post-auth from file /etc/raddb//sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 21 to 192.168.171.174 port 54825 Framed-IP-Address == 10.0.0.1 Service-Type == Framed-User Framed-Protocol == PPP Framed-MTU == 1500 Framed-Routing == None Session-Timeout == 0 Context-Name == "local" Finished request 2. Thanks! Stefan

2 2

ntlm_auth "--require-membership-of" breaks eap-conversation
by Patrick Machauer 05 Jul '12

05 Jul '12

Hello List, i've got a strange behavior here. I've got a running freeradius with peap and ntlm_auth authentication and everything works fine. But if i enhance the ntlm_auth with the "--require-membership-of" Switch, authentication still works, but i get no EAP-Response from the client anymore. +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: username(a)realm.de [mschap] Told to do MS-CHAPv2 for username(a)realm.de with NT-Password [mschap] expand: --require-membership-of=%{Huntgroup-Name} -> --require-membership-of=adp.realm.de\wlan [mschap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [mschap] expand: --username=%{Stripped-User-Name:-%{User-Name:-None}} -> --username=username [mschap] Creating challenge hash with username: username(a)realm.de [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=aefab931ad734f6e [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=884c07bf7ed6d38688c6730be8e92b714f912da037da8554 Exec-Program output: NT_KEY: 84092FAC9DC4C216C61D4411B5BB768C Exec-Program-Wait: plaintext: NT_KEY: 84092FAC9DC4C216C61D4411B5BB768C Exec-Program: returned: 0 [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok WARNING: Empty session section. Using default return values. WARNING: Empty post-auth section. Using default return values. # Executing section post-auth from file /etc/raddb/sites-enabled/mitarb } # server mitarb Going to the next request <<< Received proxied response code 2 from internal virtual server. # Executing section post-proxy from file /etc/raddb/sites-enabled/default +- entering group post-proxy {...} [eap] Doing post-proxy callback [eap] Passing reply from proxy back into the tunnel. server eduroam-inner-tunnel { [eap] Passing reply back for EAP-MS-CHAP-V2 # Executing section post-proxy from file /etc/raddb/sites-enabled/eduroam +- entering group post-proxy {...} [eap] Doing post-proxy callback rlm_eap_mschapv2: Passing reply from proxy back into the tunnel 0x86a4e0 2. rlm_eap_mschapv2: Authentication succeeded. MSCHAP Success ++[eap] returns ok Looks good so far , but then ...... server eduroam-outer-tunnel { } # server eduroam-outer-tunnel Sending Access-Challenge of id 2 to 141.72.64.3 port 32768 EAP-Message = 0x0115005b19001703010050cb972ac25fca4ed1fb69d92f327ffc0a5d206ef0541edb35627a0d93187423d332a9c1194dcf844077258dd435d362bcba65c361650224ca83a669d82fc36f2a1cff8ea1868802734676ea1474288492 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe0bbe76ce9aefea746f07bdba2aaec4b Finished request 9. Going to the next request Waking up in 4.8 seconds. Cleaning up request 0 ID 249 with timestamp +19 Cleaning up request 1 ID 250 with timestamp +19 Cleaning up request 2 ID 251 with timestamp +19 Cleaning up request 3 ID 252 with timestamp +19 Cleaning up request 4 ID 253 with timestamp +19 Cleaning up request 5 ID 254 with timestamp +19 Cleaning up request 6 ID 255 with timestamp +19 Cleaning up request 7 ID 0 with timestamp +19 Cleaning up request 8 ID 1 with timestamp +19 Cleaning up request 9 ID 2 with timestamp +19 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xe0bbe76ce9aefea7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. My ntlm_auth string in modules/mschap looks like this: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --require-membership-of=%{Huntgroup-Name} --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" If i remove the "require-membership-of" everything works fine. Why ? Help would be great ! Yours Patrick Machauer

2 1