August 2012 - Freeradius-Users - lists.freeradius.org

DHCP server for relay agents
by newuse＠qip.ru 06 Aug '12

06 Aug '12

Hi all, I am new to FreeRADIUS 2.1.x, I have seen that dhcp is already implemented, but there are some restrictions for FreeBSD. So, is it possible to setup FreeRADIUS as DHCP server for relay agents on FreeBSD? If yes, how should I configure the listening section? -- Sorry for my English, Best regards, NewUse.

2 1

RE: Tricky problem with ldap and primary groups in AD
by Franks Andy (RLZ) IT Systems Engineer 03 Aug '12

03 Aug '12

> That works fine. However I'm still intrigued about why the other > method fails, and I also presume this method doesn't allow multiple > attribute types to be updated as per the exec-program-wait script in > the example documentation? > Yes > Maybe it's not supported? Must admit I am a little confused about the > output_pairs = config. Are configuration items totally unrelated to > control attributes? That's probably a daft question but I am stumped! > config == control. The names changed in v2. Thanks Alan, that helps clear my understanding on that point. It's working from the rlm_exec module as intended now, not sure what I did wrong yesterday. I tried output_pairs=control in the module but it didn't like it, - should that work if =config is v1 stuff? Thanks again Andy

2 1

RE: Tricky problem with ldap and primary groups in AD
by Franks Andy (RLZ) IT Systems Engineer 02 Aug '12

02 Aug '12

Thank Alan, That works fine. However I'm still intrigued about why the other method fails, and I also presume this method doesn't allow multiple attribute types to be updated as per the exec-program-wait script in the example documentation? Maybe it's not supported? Must admit I am a little confused about the output_pairs = config. Are configuration items totally unrelated to control attributes? That's probably a daft question but I am stumped! Thanks very much again Andy -----Original Message----- From: freeradius-users-bounces+andy.franks=sath.nhs.uk(a)lists.freeradius.org [mailto:freeradius-users-bounces+andy.franks=sath.nhs.uk@lists.freeradiu s.org] On Behalf Of Alan DeKok Sent: 02 August 2012 17:19 To: FreeRadius users mailing list Subject: Re: Tricky problem with ldap and primary groups in AD Franks Andy (RLZ) IT Systems Engineer wrote: > and am assigning the Reply-Message attribute the value that should be > returned from the script using > > update reply { > Reply-Message := "%{control:My-Local-Integer}" > } You can just do: update reply { Reply-Message := `/path/to/program` } And have the program print out the new value. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

linelog and accounting informations
by vazoumana fofana 02 Aug '12

02 Aug '12

Hello every body, i got a question about linelog : Indeed i want to log and store any informations . I'm focusing on accounting data. The filename is linelog under logdir. I create linelog under /var/log/radius/linelog myself with rights 644. . When i run freeradius, there is no data filled under after a sucessful authentification and connection. Do i miss something ?Are there any things to do to ? Here is linelog on attached file. Cheers.

4 7

EAP problem
by David Peterson 02 Aug '12

02 Aug '12

I have a new server giving me fits and I cannot figure out what the heck I did wrong: FreeRADIUS Version 3.0.0, for host x86_64-unknown-linux-gnu, built on Jul 27 2012 at 08:55:21 Copyright (C) 1999-2012 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/sqlippool including configuration file /usr/local/etc/raddb/sql/postgresql/ippool.conf including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/eap including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/sql including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/rediswho including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/redis including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/soh including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/control-socket including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } } including dictionary file /usr/local/etc/raddb/dictionary main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### realm cueband.com { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" proto = "*" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/modules/eap eap { default_eap_type = "mschapv2" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_pwd Module: Instantiating eap-pwd pwd { group = 19 fragment_size = 1020 server_id = "theserver(a)example.com" virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } debug: Using cached TLS configuration from previous invocation Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } debug: Using cached TLS configuration from previous invocation Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_wimax Module: Instantiating module "wimax" from file /usr/local/etc/raddb/modules/wimax wimax { delete_mppe_keys = yes } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /usr/local/etc/raddb/modules/sql sql { driver = "rlm_sql_mysql" server = "10.50.0.10" port = "" login = "root" password = "unl0ck" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/usr/local/var/log/radius/sqltrace.sql" readclients = yes deletestalesessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = "UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to root@10.50.0.10:/radius rlm_sql (sql): Initialising connection pool rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Opening additional connection (0) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing query rlm_sql (sql): Read entry nasname=10.50.4.2,shortname=Geauga AZ0,secret=unl0ck rlm_sql (sql): Adding client 10.50.4.2 (Geauga AZ0, server=<none>) to clients list rlm_sql (sql): Read entry nasname=10.50.3.2,shortname=Geauga AZ120,secret=unl0ck rlm_sql (sql): Adding client 10.50.3.2 (Geauga AZ120, server=<none>) to clients list rlm_sql (sql): Read entry nasname=10.50.2.2,shortname=Geauga AZ240,secret=unl0ck rlm_sql (sql): Adding client 10.50.2.2 (Geauga AZ240, server=<none>) to clients list rlm_sql (sql): Released connection (0) rlm_sql (sql): Closing idle connection (0): Too many free connections (1 > 0) rlm_sql (sql): Closing connection (0) Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_sql_log Module: Instantiating module "sql_log" from file /usr/local/etc/raddb/modules/sql_log sql_log { path = "/usr/local/var/log/radius/radacct/sql-relay" Post-Auth = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', '%S');" sql_user_name = "%{%{User-Name}:-DEFAULT}" utf8 = no safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 max_pps = 0 } listen { type = "acct" ipaddr = * port = 0 max_pps = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Opening new proxy address * port 1814 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=10, length=274 User-Name = "{am=1}{sm=1}396139FCA3777664EE26C1EC0FFFBFF2(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x0201003d017b616d3d317d7b736d3d317d3339363133394643413337373736363445453236 4331454330464646424646324063756562616e642e636f6d Message-Authenticator = 0xd3e9283d07c41fc0d964b697a06bcbd0 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) group authorize { (0) - entering group authorize {...} (0) [preprocess] = ok (0) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (0) [wimax] = ok (0) eap : EAP packet type response id 1 length 61 (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) Found Auth-Type = EAP (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) group authenticate { (0) - entering group authenticate {...} (0) eap : EAP Identity (0) eap : processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge (0) [eap] = handled Sending Access-Challenge of id 10 to 10.50.4.2 port 49154 EAP-Message = 0x010200521a0102004d10e477a9dde07ba9f3550c4c7c181cd79d7b616d3d317d7b736d3d31 7d33393631333946434133373737363634454532364331454330464646424646324063756562 616e642e636f6d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x534198ee534382198a827a734ef513ce (0) Finished request 0. Waking up in 0.3 seconds. Waking up in 4.6 seconds. (0) Cleaning up request packet ID 10 with timestamp +4 Ready to process requests. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=11, length=274 User-Name = "{am=1}{sm=1}FACFD4B7EBA428D1FA794025E47CA4F5(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x0201003d017b616d3d317d7b736d3d317d4641434644344237454241343238443146413739 3430323545343743413446354063756562616e642e636f6d Message-Authenticator = 0x8822db580daa6714b72a1b28a3d08079 (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) group authorize { (1) - entering group authorize {...} (1) [preprocess] = ok (1) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (1) [wimax] = ok (1) eap : EAP packet type response id 1 length 61 (1) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) Found Auth-Type = EAP (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) group authenticate { (1) - entering group authenticate {...} (1) eap : EAP Identity (1) eap : processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge (1) [eap] = handled Sending Access-Challenge of id 11 to 10.50.4.2 port 49154 EAP-Message = 0x010200521a0102004d1022f39aa355b7811088ab8a1bc0b211007b616d3d317d7b736d3d31 7d46414346443442374542413432384431464137393430323545343743413446354063756562 616e642e636f6d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x03a9feba03abe4620c7aa45ec6c0be35 (1) Finished request 1. Waking up in 0.3 seconds. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=12, length=237 User-Name = "{am=1}{sm=1}FACFD4B7EBA428D1FA794025E47CA4F5(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User State = 0x03a9feba03abe4620c7aa45ec6c0be35 WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x020200060315 Message-Authenticator = 0x88fbeb571ec0612d6935910202c5f3cd (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) group authorize { (2) - entering group authorize {...} (2) [preprocess] = ok (2) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (2) [wimax] = ok (2) eap : EAP packet type response id 2 length 6 (2) eap : No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) sql : expand: %{User-Name} -> {am=1}{sm=1}FACFD4B7EBA428D1FA794025E47CA4F5(a)cueband.com (2) sql : sql_set_user escaped user --> '{am=1}{sm=1}FACFD4B7EBA428D1FA794025E47CA4F5(a)cueband.com' rlm_sql (sql): Opening additional connection (1) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Reserved connection (1) (2) sql : expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '=7Bam=3D1=7D=7Bsm=3D1=7DFACFD4B7EBA428D1FA794025E47CA4F5(a)cueband.com' ORDER BY id rlm_sql (sql): Executing query (2) sql : expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '=7Bam=3D1=7D=7Bsm=3D1=7DFACFD4B7EBA428D1FA794025E47CA4F5(a)cueband.com' ORDER BY priority rlm_sql (sql): Executing query rlm_sql (sql): Released connection (1) rlm_sql (sql): Closing idle connection (1): Too many free connections (1 > 0) rlm_sql (sql): Closing connection (1) (2) sql : User {am=1}{sm=1}FACFD4B7EBA428D1FA794025E47CA4F5(a)cueband.com not found (2) [sql] = notfound (2) [expiration] = noop (2) [logintime] = noop (2) Found Auth-Type = EAP (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) group authenticate { (2) - entering group authenticate {...} (2) eap : Request found, released from the list (2) eap : EAP NAK (2) eap : EAP-NAK asked for EAP-Type/ttls (2) eap : processing type ttls (2) ttls : Flushing SSL sessions (of #0) (2) ttls : Initiate (2) ttls : Start returned 1 (2) [eap] = handled Sending Access-Challenge of id 12 to 10.50.4.2 port 49154 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x03a9feba02aaeb620c7aa45ec6c0be35 (2) Finished request 2. Waking up in 0.2 seconds. Waking up in 4.5 seconds. (1) Cleaning up request packet ID 11 with timestamp +19 (2) Cleaning up request packet ID 12 with timestamp +19 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x03a9feba02aaeb62 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=13, length=274 User-Name = "{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x0201003d017b616d3d317d7b736d3d317d3934413433353634334330303244413345353446 3344393737394331464537304063756562616e642e636f6d Message-Authenticator = 0x3ddf39952f63cae6374be72419a86f1e (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) group authorize { (3) - entering group authorize {...} (3) [preprocess] = ok (3) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (3) [wimax] = ok (3) eap : EAP packet type response id 1 length 61 (3) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (3) [eap] = ok (3) Found Auth-Type = EAP (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) group authenticate { (3) - entering group authenticate {...} (3) eap : EAP Identity (3) eap : processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge (3) [eap] = handled Sending Access-Challenge of id 13 to 10.50.4.2 port 49154 EAP-Message = 0x010200521a0102004d10bb0df969f618f1ce068b882685a6b16f7b616d3d317d7b736d3d31 7d39344134333536343343303032444133453534463344393737394331464537304063756562 616e642e636f6d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1952930c19508927ccef9d983eb1b684 (3) Finished request 3. Waking up in 0.3 seconds. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=14, length=237 User-Name = "{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User State = 0x1952930c19508927ccef9d983eb1b684 WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x020200060315 Message-Authenticator = 0xdf93d27137571334ab88b524c3a48c2e (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) group authorize { (4) - entering group authorize {...} (4) [preprocess] = ok (4) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (4) [wimax] = ok (4) eap : EAP packet type response id 2 length 6 (4) eap : No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) sql : expand: %{User-Name} -> {am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com (4) sql : sql_set_user escaped user --> '{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com' rlm_sql (sql): Opening additional connection (2) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Reserved connection (2) (4) sql : expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '=7Bam=3D1=7D=7Bsm=3D1=7D94A435643C002DA3E54F3D9779C1FE70(a)cueband.com' ORDER BY id rlm_sql (sql): Executing query (4) sql : expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '=7Bam=3D1=7D=7Bsm=3D1=7D94A435643C002DA3E54F3D9779C1FE70(a)cueband.com' ORDER BY priority rlm_sql (sql): Executing query rlm_sql (sql): Released connection (2) rlm_sql (sql): Closing idle connection (2): Too many free connections (1 > 0) rlm_sql (sql): Closing connection (2) (4) sql : User {am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com not found (4) [sql] = notfound (4) [expiration] = noop (4) [logintime] = noop (4) Found Auth-Type = EAP (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) group authenticate { (4) - entering group authenticate {...} (4) eap : Request found, released from the list (4) eap : EAP NAK (4) eap : EAP-NAK asked for EAP-Type/ttls (4) eap : processing type ttls (4) ttls : Initiate (4) ttls : Start returned 1 (4) [eap] = handled Sending Access-Challenge of id 14 to 10.50.4.2 port 49154 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1952930c18518627ccef9d983eb1b684 (4) Finished request 4. Waking up in 0.2 seconds. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=15, length=319 User-Name = "{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User State = 0x1952930c18518627ccef9d983eb1b684 WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x0203005815800000004e16030100490100004503014e4a68271cb3efd28c7ffd6cb2d5a69e 02c7835c4f6293c615d9eced05ab3a1700001e00390038003500160013000a00330032002f00 15001200090014001100080100 Message-Authenticator = 0x94c9d5d50fa8ae9231510126cdcbd0a8 (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) group authorize { (5) - entering group authorize {...} (5) [preprocess] = ok (5) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (5) [wimax] = ok (5) eap : EAP packet type response id 3 length 88 (5) eap : Continuing tunnel setup. (5) [eap] = ok (5) Found Auth-Type = EAP (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) group authenticate { (5) - entering group authenticate {...} (5) eap : Request found, released from the list (5) eap : EAP/ttls (5) eap : processing type ttls (5) ttls : Authenticate (5) ttls : processing EAP-TLS TLS Length 78 (5) ttls : Length Included (5) ttls : eaptls_verify returned 11 (5) ttls : (other): before/accept initialization (5) ttls : TLS_accept: before/accept initialization (5) ttls : <<< TLS 1.0 Handshake [length 0049], ClientHello (5) ttls : TLS_accept: SSLv3 read client hello A (5) ttls : >>> TLS 1.0 Handshake [length 004a], ServerHello (5) ttls : TLS_accept: SSLv3 write server hello A (5) ttls : >>> TLS 1.0 Handshake [length 085e], Certificate (5) ttls : TLS_accept: SSLv3 write certificate A (5) ttls : >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange (5) ttls : TLS_accept: SSLv3 write key exchange A (5) ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone (5) ttls : TLS_accept: SSLv3 write server done A (5) ttls : TLS_accept: SSLv3 flush data (5) ttls : TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (5) ttls : eaptls_process returned 13 (5) [eap] = handled Sending Access-Challenge of id 15 to 10.50.4.2 port 49154 EAP-Message = 0x010403ec15c000000acd160301004a0200004603015012ea53cce022a5de5d29899ab62086 5e0b6e626f469622254c0e50eb26ce08204cf09e9c9f327a21bd3f49610525905b42346e067b 3d1f254b14331103397e81003900160301085e0b00085a0008570003a6308203a23082028aa0 03020102020101300d06092a864886f70d0101050500308193310b3009060355040613024652 310f300d060355040813065261646975733112301006035504071309536f6d65776865726531 153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116 1161646d696e406578616d706c652e636f6d3126302406035504 EAP-Message = 0x03131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31 32303732373132353731395a170d3133303732373132353731395a307c310b30090603550406 13024652310f300d0603550408130652616469757331153013060355040a130c4578616d706c 6520496e632e312330210603550403131a4578616d706c652053657276657220436572746966 69636174653120301e06092a864886f70d010901161161646d696e406578616d706c652e636f 6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100be15f401 8757bc2f4b8f997f0a1e9d1ca5dc41fcfd0eb2b787eee7a3ebe5 EAP-Message = 0x21573525464944eab09b4ffe0337dcbd756fb653290d7665b5fd49130292b9398948b72fc7 10eda687e3fefb84f601a95504c4da1b4b905e13d942af2a415422bf2a7c08ce134b099cd075 bdb85739fbc3e8133fef94631116eb03a78c6b658adf2a244e40e371a74dfd5bcade5f98d0c2 f85e44c1084e012e7ad72a1344aa7600f22c9fe2a90a14d5c52623bd4397bdbfa7a383dfb8f0 23de8e0ccb25c81eabed2d5a8ea3853b9a3afbd538bf3c7fbd2cf48962bef7e3da3924b11892 c7b0c422647fb1a11ca55df5634be49c74b581869d1d9dfb28c982ad07613d51194075d6e502 03010001a317301530130603551d25040c300a06082b06010505 EAP-Message = 0x070301300d06092a864886f70d010105050003820101007f104aa64a39f7411fcc53af2182 ad8801983e5ce15768e9a4adc9fae77d3eb5c37b601ee0481abb014cfaf2c660a1d0711b81b5 0d325fdd1de77e7bea774a879fbbd4127019ce73a86d729f38e75fedbc09f96dfcbf49b824c5 2e7b3d5652a78421afc9caf2c197d0e6c9cd653c5828a12a87d9cc131871b941f8cda86a594b 8e1d08a16d2fa0f8912199d936fb59ac2bf50e0cd8a0390279aac75d04e9619ce5cfd35f6301 f89691b32f904b48a73714e48fe9ac157cd3540167ae31786cd2eb9a598f4941e499ce798c42 748c445ff91c88c423cba1d29ce7f3062ca1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1952930c1b568627ccef9d983eb1b684 (5) Finished request 5. Waking up in 0.1 seconds. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=16, length=237 User-Name = "{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User State = 0x1952930c1b568627ccef9d983eb1b684 WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x020400061500 Message-Authenticator = 0x50bbf63701339da3751b0969f39e75ff (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) group authorize { (6) - entering group authorize {...} (6) [preprocess] = ok (6) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (6) [wimax] = ok (6) eap : EAP packet type response id 4 length 6 (6) eap : Continuing tunnel setup. (6) [eap] = ok (6) Found Auth-Type = EAP (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) group authenticate { (6) - entering group authenticate {...} (6) eap : Request found, released from the list (6) eap : EAP/ttls (6) eap : processing type ttls (6) ttls : Authenticate (6) ttls : processing EAP-TLS (6) ttls : Received TLS ACK (6) ttls : Received TLS ACK (6) ttls : ACK handshake fragment handler (6) ttls : eaptls_verify returned 1 (6) ttls : eaptls_process returned 13 (6) [eap] = handled Sending Access-Challenge of id 16 to 10.50.4.2 port 49154 EAP-Message = 0x010503ec15c000000acdb86f4a892e7341ac83b4d73f079f9b7bc84f5bf9b2b36de758714f dd1128197b5a840004ab308204a73082038fa0030201020209009f2d7ada256cb590300d0609 2a864886f70d0101050500308193310b3009060355040613024652310f300d06035504081306 5261646975733112301006035504071309536f6d65776865726531153013060355040a130c45 78616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d 706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520 417574686f72697479301e170d3132303732373132353731395a EAP-Message = 0x170d3133303732373132353731395a308193310b3009060355040613024652310f300d0603 55040813065261646975733112301006035504071309536f6d65776865726531153013060355 040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e 406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274696669 6361746520417574686f7269747930820122300d06092a864886f70d01010105000382010f00 3082010a0282010100cfac03ee20e4ce9bdc0bd0a8138dcf8f6dd0a6cc7223212941e9637389 97c7804c8285dc1c6e118a8110d859c9115ac7632a3bf6ce899b EAP-Message = 0xdd5c0ecd12235a8bd509535b9d5a84728637c6e034ceff030ddf41d755fc87ad1573d20de7 9706f928cb3991f3f000c309b268d63517a7152351ddcdb0374c4d425b7dc79aaa54e04b824a e46c96debf4c67eb4f7644dfdd8d1b5f69e4abb512f60ac79b56687c096553bfb607384a82f0 40d00438e4448115ae8000f53994076a1a009b8c39961f200dd05fe6e89c8c694c8989d46e1b 393598a21f2c470b5f73b143730a631b2772402c6081b54f9725963cc2bef9642030ce9b1848 0ba7ef13a68535469f94f5370203010001a381fb3081f8301d0603551d0e041604144eb70ed6 4e9941f34a7066a80dccbede358df58f3081c80603551d230481 EAP-Message = 0xc03081bd80144eb70ed64e9941f34a7066a80dccbede358df58fa18199a48196308193310b 3009060355040613024652310f300d0603550408130652616469757331123010060355040713 09536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06 092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403 131d4578616d706c6520436572746966696361746520417574686f726974798209009f2d7ada 256cb590300c0603551d13040530030101ff300d06092a864886f70d01010505000382010100 35808c266c4978a7eb629101e5d27c6dbb11 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1952930c1a578627ccef9d983eb1b684 (6) Finished request 6. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=17, length=237 User-Name = "{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User State = 0x1952930c1a578627ccef9d983eb1b684 WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x020500061500 Message-Authenticator = 0xfa070be428a7e0f31c1fb4c68760b4cf (7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (7) group authorize { (7) - entering group authorize {...} (7) [preprocess] = ok (7) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (7) [wimax] = ok (7) eap : EAP packet type response id 5 length 6 (7) eap : Continuing tunnel setup. (7) [eap] = ok (7) Found Auth-Type = EAP (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) group authenticate { (7) - entering group authenticate {...} (7) eap : Request found, released from the list (7) eap : EAP/ttls (7) eap : processing type ttls (7) ttls : Authenticate (7) ttls : processing EAP-TLS (7) ttls : Received TLS ACK (7) ttls : Received TLS ACK (7) ttls : ACK handshake fragment handler (7) ttls : eaptls_verify returned 1 (7) ttls : eaptls_process returned 13 (7) [eap] = handled Sending Access-Challenge of id 17 to 10.50.4.2 port 49154 EAP-Message = 0x01060313158000000acd58f51ec582b80339e1b6e4840c26464b17b59fd9be0f60822d0d5a ae008d36d7088a20489e421786f0359fd2e268ceafa3bf9c07bbf1c2e9267fdb99690d3d2f13 3235d56cf9583252b353b79cca2c57dbe3ca644f175bb48df9389d3575979cef123841f22597 956732f89380db12983f038ae0d7b7d4cbe8adac83af314936a2c318ea702c17cf0749d916d0 750a5af92a40a8419f9444ba0da4604878fd7094eaddf055aedcf748443c1f293bacd4e4d297 c6f5c6bf09039fdd9f6f570a24532a162a2688be5e16ad62f6050d4091be7d0a5c933c653802 3ac87145d6a53bf81dbb0246e3f745dca39b773e5b160301020d EAP-Message = 0x0c0002090080937241455120e5f86723331c043ae3551d357c209fb557cb58312d1b1583a9 1e018e4955d2f2891568f6490d44dab517976062592a362a6857f2578ef2d1865e469f97f7dc 2b8b1fa0a1fed25aac2ccee0160f3369a80a73d70958c736f3eb6a0d59a74e8414372a5b2963 8a7e74e2875188d3f4280aa8633ac3ecac606c8abb00010200800198b440f8e9d92975289bc5 b020fe363603f57a4d9edf3e3627b137e0c60ba81756694410d0b588f253221c1b09b34d32a8 402a77d2b83eea0fc6551c1ef056f4d7b0db870f4a4fb6fc4a6e140dd6faaca5d1948255fa0f 1dbc352adfa2eb6585b5a2c0ae3dc2a738aa4ee53950dfe1bd40 EAP-Message = 0x368f69b0b921b6e14f7be84725b60100193202fd650f77df635b926ddebc6b0acf680a5ff5 454f8560c920e0ed1437ede5982e783fc5c1ab38cec26a2379ff7595fef27e4db5aee82b9523 31fd604d86daf606276006464defb8b06ff3e76ca02800f4a3401b803dca6ae97459add32448 d59fbd344f8dc8bb6622a97cf8cabfb6f6827eb10c8df775e5ffe8752747eff36249120770dd 48d2c885d7f93caff347d9baad490b640e45240629fc317a4cfae657cec634ac2809f214c984 fff2e9d6d8fff9ca019bf88aa997fd0cdaa3d726c3efa983167f925e3c40be1eeb9a2121b465 605dea0d6371adecf2d270321a2b30d427c848e94a37a00fbeef EAP-Message = 0xab2f2f04cb1feffc067e581402bb2bf5913ea116030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1952930c1d548627ccef9d983eb1b684 (7) Finished request 7. Waking up in 4.3 seconds. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=18, length=439 User-Name = "{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User State = 0x1952930c1d548627ccef9d983eb1b684 WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x020600d01580000000c616030100861000008200804601ed4cea7a4fbf3ea936bb190447aa 79e902f76bd9ca26bf56b5002c860bb7514513debe0262889773db19e9fde0637c596e9f8e95 c758e5572d94b816837ff33624babf64a1e49b10391c78c7d0429098de0483b093fdc72b16e8 efe20271ceb0c635de78bf1d6676197e9132e558accb96c43accde388dc47be89ee22b401403 0100010116030100308113e5ba633d23953215f260177dec8b25a61b3db96c29b3986c88e2c4 ed89e87c5f2bdc224e78ade7702668167ba5a6 Message-Authenticator = 0xf1cb9dcb23d2730fdd71275b451e332d (8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (8) group authorize { (8) - entering group authorize {...} (8) [preprocess] = ok (8) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (8) [wimax] = ok (8) eap : EAP packet type response id 6 length 208 (8) eap : Continuing tunnel setup. (8) [eap] = ok (8) Found Auth-Type = EAP (8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (8) group authenticate { (8) - entering group authenticate {...} (8) eap : Request found, released from the list (8) eap : EAP/ttls (8) eap : processing type ttls (8) ttls : Authenticate (8) ttls : processing EAP-TLS TLS Length 198 (8) ttls : Length Included (8) ttls : eaptls_verify returned 11 (8) ttls : <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange (8) ttls : TLS_accept: SSLv3 read client key exchange A (8) ttls : <<< TLS 1.0 ChangeCipherSpec [length 0001] (8) ttls : <<< TLS 1.0 Handshake [length 0010], Finished (8) ttls : TLS_accept: SSLv3 read finished A (8) ttls : >>> TLS 1.0 ChangeCipherSpec [length 0001] (8) ttls : TLS_accept: SSLv3 write change cipher spec A (8) ttls : >>> TLS 1.0 Handshake [length 0010], Finished (8) ttls : TLS_accept: SSLv3 write finished A (8) ttls : TLS_accept: SSLv3 flush data SSL: adding session 4cf09e9c9f327a21bd3f49610525905b42346e067b3d1f254b14331103397e81 to cache (8) ttls : (other): SSL negotiation finished successfully SSL Connection Established (8) ttls : eaptls_process returned 13 (8) [eap] = handled Sending Access-Challenge of id 18 to 10.50.4.2 port 49154 EAP-Message = 0x0107004515800000003b1403010001011603010030570f9a8f3128c5efe3ab40fedb710a6a 98b4a758734a6f041228fc595846a4271cd9fab4385458fcc226338fb0b91a15 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1952930c1c558627ccef9d983eb1b684 (8) Finished request 8. Waking up in 0.3 seconds. rad_recv: Access-Request packet from host 10.50.4.2 port 49154, id=19, length=423 User-Name = "{am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com" NAS-IP-Address = 10.50.4.2 NAS-Port-Type = Wireless-802.16 NAS-Port = 1 Calling-Station-Id = "\254\201\022\027\217\352" NAS-Identifier = "010010010000032000" WiMAX-GMT-Timezone-offset = 0 Framed-MTU = 1490 Service-Type = Framed-User State = 0x1952930c1c558627ccef9d983eb1b684 WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303130303130303130303030303332303030 EAP-Message = 0x020700c015001703010020b101f024e95005e369d9c5d192382a8d453c5e51c9af2d15d2a8 b755743b33d3170301009021437256763846c6c051ca099d0357cea3821edb948ba156193791 20f1b97521bb987a775214f1564df6ffbb3f01fd4476a5319bbe7ce4fd1dd8a93abd57cb28b6 b8aed2f37753ede1783589002e0404d1a4247525b941b14d6708f0988df41511758749c51d52 9423167e100ab43bab6991c786266a10f5dd03324930afb09ae3020edcc6a9ac7a77eed51b44 0c88a8 Message-Authenticator = 0xbfaf7a1a3a19e84106b8191119a83fcc (9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (9) group authorize { (9) - entering group authorize {...} (9) [preprocess] = ok (9) [mschap] = noop rlm_wimax: Fixing WiMAX binary Calling-Station-Id to ac-81-12-17-8f-ea (9) [wimax] = ok (9) eap : EAP packet type response id 7 length 192 (9) eap : Continuing tunnel setup. (9) [eap] = ok (9) Found Auth-Type = EAP (9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (9) group authenticate { (9) - entering group authenticate {...} (9) eap : Request found, released from the list (9) eap : EAP/ttls (9) eap : processing type ttls (9) ttls : Authenticate (9) ttls : processing EAP-TLS (9) ttls : eaptls_verify returned 7 (9) ttls : Done initial handshake (9) ttls : eaptls_process returned 7 (9) ttls : Session established. Proceeding to decode tunneled attributes. (9) ttls : Tunneled attribute 1 is too short (1 < 12) to contain anything useful. SSL: Removing session 4cf09e9c9f327a21bd3f49610525905b42346e067b3d1f254b14331103397e81 from the cache (9) eap : Handler failed in EAP/ttls (9) eap : Failed in EAP select (9) [eap] = invalid (9) Failed to authenticate the user. (9) Using Post-Auth-Type Reject (9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (9) group REJECT { (9) - entering group REJECT {...} (9) attr_filter.access_reject : expand: %{User-Name} -> {am=1}{sm=1}94A435643C002DA3E54F3D9779C1FE70(a)cueband.com (9) attr_filter.access_reject : Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) Finished request 9. Waking up in 0.2 seconds. Waking up in 0.1 seconds. Waking up in 0.6 seconds. (9) Sending delayed reject Sending Access-Reject of id 19 to 10.50.4.2 port 49154 EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 2.3 seconds. (3) Cleaning up request packet ID 13 with timestamp +35 (4) Cleaning up request packet ID 14 with timestamp +35 (5) Cleaning up request packet ID 15 with timestamp +36

4 12

Problems with group cheking attributes
by Andrei Petru Mura 02 Aug '12

02 Aug '12

I have a user called "test150" that belongs to group "testgroup123". Bellow you can see what I have in my database related to "test150" user and "testgroup123" group: select * from radcheck where username = 'test150'; id | username | attribute |op | value --------------+---------------+-----------------------------+----+--------- 1523812 | test150 | Cleartext-Password | := | test150 select * from radgroupcheck where groupname = 'testgroup123'; id | groupname | attribute | op | value ----+--------------------+----------------------------------------+----+---------- 11 | testgroup123 | NAS-IP-Address | := | 10.3.1.1 15 | testgroup123 | CarboSolutions-Max-Users | < | 5 CarboSolutions-Max-Users is an attribute declared of myself. select * from radusergroup where username = 'test150'; username | groupname | priority ---------------+--------------------+---------- test150 | testgroup123 | 0 select * from radgroupreply where groupname = 'testgroup123'; id | groupname | attribute | op | value -----+--------------------+------------------------------------------+----+-------- 14 | testgroup123 | WISPr-Bandwidth-Max-Down | := | 256000 *The problem:* * * When I try to log in with "test150" and CarboSolutions-Max-Users attribute is < 5, the bandwidth limitation is working (in debug output I can see that FR sends WISPr-Bandwidth-Max-Down attribute in reply - and it applies). But when CarboSolutions-Max-Users check isn't fulfilled (I mean is greater or equal to 5) WISPr-Bandwidth-Max-Down attribute isn't shown in FR debug output as reply attrtibute - and not working bandwidth limitation. *N.B.1 *I set the CarboSolutions-Max-Users attribute in default site's file in authorize section. Looks like this: update request { CarboSolutions-Max-Users="%{sql:SELECT COUNT(DISTINCT radacct.UserName) FROM radacct INNER JOIN radusergroup ON radusergroup.UserName = radacct.UserName WHERE radusergroup.GroupName = (SELECT GroupName FROM radusergroup ...}" } I understand that when group's check conditions aren't meet, I can login neglecting the group's attributes. Can anybody tell me how to avoid that behavior? I think that if a user belongs to a group and the checks for the group aren't meet, the user shoudn't be able to be authenticated. Am I wrong? If not, what's the problem to my issue? *N.B.2 *The output from running FR with -XXX switch is (when it is not working well): rad_recv: Access-Request packet from host 127.0.0.1 port 34173, id=225, length=276 ChilliSpot-Version = "1.2.9" User-Name = "test150" User-Password = "test150" Service-Type = Login-User Acct-Session-Id = "501a75b300000001" Framed-IP-Address = 10.3.1.3 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 NAS-Port-Id = "00000001" Calling-Station-Id = "00-25-22-83-95-C5" Called-Station-Id = "F8-D1-11-05-93-01" NAS-IP-Address = 10.3.1.1 NAS-Identifier = "nas-1" WISPr-Location-ID = "isocc=,cc=,ac=,network=netNFork," WISPr-Location-Name = "netNFork_LAN" WISPr-Logoff-URL = "http://10.3.1.1:3001/logoff" Message-Authenticator = 0x0c4075cf2f111445caff3fb367ddd776 Thu Aug 2 15:43:44 2012 : Info: # Executing section authorize from file /netnfork/radius//etc/raddb/sites-enabled/default Thu Aug 2 15:43:44 2012 : Info: +- entering group authorize {...} Thu Aug 2 15:43:44 2012 : Info: expand: %S -> 2012-08-02 15:43:44 Thu Aug 2 15:43:44 2012 : Info: sql_xlat Thu Aug 2 15:43:44 2012 : Info: expand: %{User-Name} -> test150 Thu Aug 2 15:43:44 2012 : Info: sql_set_user escaped user --> 'test150' Thu Aug 2 15:43:44 2012 : Info: expand: SELECT COUNT(DISTINCT CallingStationId) FROM radacct WHERE UserName='%{User-Name}' AND CallingStationId != '%{Calling-Station-Id}' -> SELECT COUNT(DISTINCT CallingStationId) FROM radacct WHERE UserName='test150' AND CallingStationId != '00-25-22-83-95-C5' Thu Aug 2 15:43:44 2012 : Debug: rlm_sql (sql): Reserving sql socket id: 30 Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: Status: PGRES_TUPLES_OK Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: query affected rows = 1 , fields = 1 Thu Aug 2 15:43:45 2012 : Info: sql_xlat finished Thu Aug 2 15:43:45 2012 : Debug: rlm_sql (sql): Released sql socket id: 30 Thu Aug 2 15:43:45 2012 : Info: expand: %{sql:SELECT COUNT(DISTINCT CallingStationId) FROM radacct WHERE UserName='%{User-Name}' AND CallingStationId != '%{Calling-Station-Id}'} -> 0 Thu Aug 2 15:43:45 2012 : Info: sql_xlat Thu Aug 2 15:43:45 2012 : Info: expand: %{User-Name} -> test150 Thu Aug 2 15:43:45 2012 : Info: sql_set_user escaped user --> 'test150' //*** this interests (bellow)--> Thu Aug 2 15:43:45 2012 : Info: expand: SELECT COUNT(DISTINCT radacct.UserName) FROM radacct INNER JOIN radusergroup ON radusergroup.UserName = radacct.UserName WHERE radusergroup.GroupName = (SELECT GroupName FROM radusergroup WHERE UserName='%{User-Name}') AND AcctStopTime ISNULL -> SELECT COUNT(DISTINCT radacct.UserName) FROM radacct INNER JOIN radusergroup ON radusergroup.UserName = radacct.UserName WHERE radusergroup.GroupName = (SELECT GroupName FROM radusergroup WHERE UserName='test150') AND AcctStopTime ISNULL Thu Aug 2 15:43:45 2012 : Debug: rlm_sql (sql): Reserving sql socket id: 29 Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: Status: PGRES_TUPLES_OK Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: query affected rows = 1 , fields = 1 Thu Aug 2 15:43:45 2012 : Info: sql_xlat finished Thu Aug 2 15:43:45 2012 : Debug: rlm_sql (sql): Released sql socket id: 29 Thu Aug 2 15:43:45 2012 : Info: expand: %{sql:SELECT COUNT(DISTINCT radacct.UserName) FROM radacct INNER JOIN radusergroup ON radusergroup.UserName = radacct.UserName WHERE radusergroup.GroupName = (SELECT GroupName FROM radusergroup WHERE UserName='%{User-Name}') AND AcctStopTime ISNULL} -> 1 Thu Aug 2 15:43:45 2012 : Info: ++[request] returns notfound Thu Aug 2 15:43:45 2012 : Info: [sql] expand: %{User-Name} -> test150 Thu Aug 2 15:43:45 2012 : Info: [sql] sql_set_user escaped user --> 'test150' Thu Aug 2 15:43:45 2012 : Debug: rlm_sql (sql): Reserving sql socket id: 28 Thu Aug 2 15:43:45 2012 : Info: [sql] expand: SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = 'test150' ORDER BY id Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: Status: PGRES_TUPLES_OK Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: query affected rows = 1 , fields = 5 Thu Aug 2 15:43:45 2012 : Info: [sql] User found in radcheck table Thu Aug 2 15:43:45 2012 : Info: [sql] expand: SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = 'test150' ORDER BY id Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: Status: PGRES_TUPLES_OK Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: query affected rows = 0 , fields = 5 Thu Aug 2 15:43:45 2012 : Info: [sql] expand: SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM radusergroup WHERE UserName='test150' ORDER BY priority Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: Status: PGRES_TUPLES_OK Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: query affected rows = 1 , fields = 1 Thu Aug 2 15:43:45 2012 : Info: [sql] expand: SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = 'testgroup123' ORDER BY id Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: Status: PGRES_TUPLES_OK Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: query affected rows = 2 , fields = 5 Thu Aug 2 15:43:45 2012 : Debug: rlm_sql (sql): Released sql socket id: 28 Thu Aug 2 15:43:45 2012 : Info: ++[sql] returns ok Thu Aug 2 15:43:45 2012 : Info: ++[expiration] returns noop Thu Aug 2 15:43:45 2012 : Info: ++[logintime] returns noop Thu Aug 2 15:43:45 2012 : Info: WARNING: Please update your configuration, and remove 'Auth-Type = Local' Thu Aug 2 15:43:45 2012 : Info: WARNING: Use the PAP or CHAP modules instead. Thu Aug 2 15:43:45 2012 : Info: User-Password in the request is correct. Thu Aug 2 15:43:45 2012 : Info: # Executing section post-auth from file /netnfork/radius//etc/raddb/sites-enabled/default Thu Aug 2 15:43:45 2012 : Info: +- entering group post-auth {...} Thu Aug 2 15:43:45 2012 : Info: ++[exec] returns noop Sending Access-Accept of id 225 to 127.0.0.1 port 34173 Thu Aug 2 15:43:45 2012 : Info: Finished request 14. Thu Aug 2 15:43:45 2012 : Debug: Going to the next request Thu Aug 2 15:43:45 2012 : Debug: Waking up in 2.9 seconds. //*** bellow is the accounting log, I think it shouldn't present interest rad_recv: Accounting-Request packet from host 127.0.0.1 port 41985, id=8, length=223 ChilliSpot-Version = "1.2.9" ChilliSpot-Attr-10 = 0x00000002 Event-Timestamp = "Aug 2 2012 15:43:44 EEST" User-Name = "test150" Acct-Status-Type = Start Acct-Session-Id = "501a75b300000001" Framed-IP-Address = 10.3.1.3 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 NAS-Port-Id = "00000001" Calling-Station-Id = "00-25-22-83-95-C5" Called-Station-Id = "F8-D1-11-05-93-01" NAS-IP-Address = 10.3.1.1 NAS-Identifier = "nas-1" WISPr-Location-ID = "isocc=,cc=,ac=,network=netNFork," WISPr-Location-Name = "netNFork_LAN" Thu Aug 2 15:43:45 2012 : Info: # Executing section preacct from file /netnfork/radius//etc/raddb/sites-enabled/default Thu Aug 2 15:43:45 2012 : Info: +- entering group preacct {...} Thu Aug 2 15:43:45 2012 : Info: ++[preprocess] returns ok Thu Aug 2 15:43:45 2012 : Info: [acct_unique] Hashing 'NAS-Port = 1,Client-IP-Address = 127.0.0.1,NAS-IP-Address = 10.3.1.1,Acct-Session-Id = "501a75b300000001",User-Name = "test150"' Thu Aug 2 15:43:45 2012 : Info: [acct_unique] Acct-Unique-Session-ID = "84a01adb8bcce762". Thu Aug 2 15:43:45 2012 : Info: ++[acct_unique] returns ok Thu Aug 2 15:43:45 2012 : Info: [suffix] No '@' in User-Name = "test150", looking up realm NULL Thu Aug 2 15:43:45 2012 : Info: [suffix] No such realm "NULL" Thu Aug 2 15:43:45 2012 : Info: ++[suffix] returns noop Thu Aug 2 15:43:45 2012 : Info: # Executing section accounting from file /netnfork/radius//etc/raddb/sites-enabled/default Thu Aug 2 15:43:45 2012 : Info: +- entering group accounting {...} Thu Aug 2 15:43:45 2012 : Info: [detail] expand: %{Packet-Src-IP-Address} -> 127.0.0.1 Thu Aug 2 15:43:45 2012 : Info: [detail] expand: /netnfork/radius//var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /netnfork/radius//var/log/radius/radacct/127.0.0.1/detail-20120802 Thu Aug 2 15:43:45 2012 : Info: [detail] /netnfork/radius//var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /netnfork/radius//var/log/radius/radacct/ 127.0.0.1/detail-20120802 Thu Aug 2 15:43:45 2012 : Info: [detail] expand: %t -> Thu Aug 2 15:43:45 2012 Thu Aug 2 15:43:45 2012 : Info: ++[detail] returns ok Thu Aug 2 15:43:45 2012 : Info: [sql] expand: %{User-Name} -> test150 Thu Aug 2 15:43:45 2012 : Info: [sql] sql_set_user escaped user --> 'test150' Thu Aug 2 15:43:45 2012 : Info: [sql] expand: %{NAS-Port} -> 1 Thu Aug 2 15:43:45 2012 : Info: [sql] expand: %{Acct-Delay-Time} -> Thu Aug 2 15:43:45 2012 : Info: [sql] ... expanding second conditional Thu Aug 2 15:43:45 2012 : Info: [sql] expand: INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctAuthentic, ConnectInfo_start, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{NAS-IP-Address}', %{%{NAS-Port}:-NULL}, '%{NAS-Port-Type}', ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), '%{Acct-Authentic}', '%{Connect-Info}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet, 0, '%{X-Ascend-Session-Svr-Key}') -> INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctAuthentic, ConnectInfo_start, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, Thu Aug 2 15:43:45 2012 : Debug: rlm_sql (sql): Reserving sql socket id: 27 Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: Status: PGRES_COMMAND_OK Thu Aug 2 15:43:45 2012 : Debug: rlm_sql_postgresql: query affected rows = 1 Thu Aug 2 15:43:45 2012 : Debug: rlm_sql (sql): Released sql socket id: 27 Thu Aug 2 15:43:45 2012 : Info: ++[sql] returns ok Thu Aug 2 15:43:45 2012 : Info: [attr_filter.accounting_response] expand: %{User-Name} -> test150 Thu Aug 2 15:43:45 2012 : Debug: attr_filter: Matched entry DEFAULT at line 12 Thu Aug 2 15:43:45 2012 : Info: ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 8 to 127.0.0.1 port 41985 Thu Aug 2 15:43:45 2012 : Info: Finished request 15. Thu Aug 2 15:43:45 2012 : Info: Cleaning up request 15 ID 8 with timestamp +1230 Thu Aug 2 15:43:45 2012 : Debug: Going to the next request Thu Aug 2 15:43:45 2012 : Debug: Waking up in 2.9 seconds. Thu Aug 2 15:43:48 2012 : Info: Cleaning up request 14 ID 225 with timestamp +1229 Thu Aug 2 15:43:48 2012 : Info: Ready to process requests.

2 1

RE: Tricky problem with ldap and primary groups in AD
by Franks Andy (RLZ) IT Systems Engineer 02 Aug '12

02 Aug '12

Hi, I've got another query to do with this issue. I'm trying to follow up running an external script that could feasibly update a control value within freeradius. It's working fine to push the variable outwards, and recording that passed variable to a file using the bash redirect >> , however I've not been successful updating a control attribute. A reply attribute works, for example "Reply-Message := \"hello fred\"" but (in this example) My-Local-Integer := <new value> doesn't seem to get back. I've got Input_pairs = control And Output_pairs = control in the exec module I'm using (have I misunderstood their usage?) and am assigning the Reply-Message attribute the value that should be returned from the script using update reply { Reply-Message := "%{control:My-Local-Integer}" } so I can see what's happening to the control value which seems to be working as radtest shows the reply message attribute but doesn't show that it's been updated. The output of freeradius -X does produce Exec-Program-Wait : value-pairs: My-Local-Integer := <newly set value> but the value never makes it into the control attribute Perhaps I'm doing something I can't do with control attributes, or am just doing it wrong, which is much more likely. I've followed the example of the exec-program-wait script in the docs folder and it works as stated before for reply attributes, just not control ones. Thanks again Andy

2 1

RE: Tricky problem with ldap and primary groups in AD
by Franks Andy (RLZ) IT Systems Engineer 02 Aug '12

02 Aug '12

On 08/01/2012 10:52 PM, Franks Andy (RLZ) IT Systems Engineer wrote: > user on a specific client machine. The Ldap-Group doesn't see the > primary group as it's set to do a"memberof" lookup. Other groups are > seen fine. >Yes. Sadly this is an AD-specific behaviour, and there's no way to change it. It's EXTREMELY unhelpful in cases like this. Good old M$. Delightfully different. > > There are3 ways I can seethis working : > > 1) Get theLDAPbods to assign a different primary groupand use the > other group to dictate vlan membership. We've 5000 odd clients so this > isn't my favourite. >FWIW, the way we "solve" this at our site is to ensure that "Domain Users" is the primary group for all accounts. >However, we don't store dummy users for MAC auth in AD. Just FYI, wanted to avoid this because it allows logon to systems that depend on the Domain Users group for authorisation, of which we unfortunately have quite a few > > 2) Check the primarygroupid attribute out by mapping it using > ldap.attrmap and attributes in the dictionary file, but then as far as > I can tell I can't use these as checkitems within the users file. It's >Correct. You can however check them in "unlang" > >authorize { > ... > ldap > if (Ldap-Group == mygroup) { > # they're a member via memberof > ... > } > elif (control:Ldap-PrimaryGroupId == 1234) { > # assuming 1234 is the RID for "mygroup"s SID > # they're a member via primaryGroupId > ... > } > else { > reject > } > ... >} That's fantastic - this example is really helpful. I'd been playing around with putting an entry into the dictionary file for a custom attribute then using ldap.attrmap to map it up to the primaryGroupId - didn't realise you could just reference Ldap-PrimaryGroupId "out of the box". Is there a list of these built-in control attributes somewhere? Haven't seen them in the files/manuals I've been looking at so far, but then it's quite new to me. I can see Ldap-Group and Ldap-UserDn but not Ldap-PrimaryGroupId. Maybe it's inferred that I use an ldap.attrmap entry? > also tedious to have to know the primarygroupIDsfor each group. I'd >It is. I assume you're familiar with SIDs and RIDs, and what these values mean? Yes, it's what I talk about in option 3, - there's a translation in data type from integer to byte apparently to translate from one to the other, although I haven't looked into it massively - you've mentioned more of the detail below. > quite like the users file to be the main source of passing radius > attributes back to clients, but there may be another way? > > 3) Something else a bit more clever. I've seen various examples of > java / vb.net/php etc ways of taking the primarygroupid, changing it's > data type and thus finding the group name, which could then maybe be > passed back to the users file. I have absolutely no idea here. >Not quite sure what you mean here. >To convert a primaryGroupId to a group name, you need to: > 1. Extract the domain SID for the forest you are querying > 2. Append the group ID (RID) > 3. Convert to binary > 4. Perform an LDAP binary search > This is fairly tedious. I'd avoid it, if possible, and I'm 99% sure you couldn't do it inside FreeRADIUS using the existing LDAP code. Perhaps using the perl / python modules might yield something, although haven't even looked at how those are used. I suppose I could also statically call a exec program but guess that would be quite costly. >A few other solutions you might consder: >4) Don't store the MAC address "users" in AD; put them in an SQL DB accessible (better yet, *on*) the RADIUS servers. If you really want to master >them in AD, maybe use a periodic LDAP query to copy the data from AD into SQL. Need to look into drawing data down from a SQL server. It makes sense that the data is stored there, perhaps as a copy. We'd use the AD to enable / disable computers which we don't want users to connect to the wireless with any longer. OTOH, it would sort the security issue of a usernames existing that have immediately guessable passwords. I'm moving from NPS towards freeradius, all of this wasn't possible and so it's good to thing "out of the box" a bit! >5) See if the group checking via "wbinfo" / winbind can work for you. >This should, IIRC, give primary as well as nested groups back. However, it'll be slow (since you'll have to exec "wbinfo" on each auth) and non- >standard - probably tricky to setup. This is interesting - apparently, according to the smoothwall company who provide our web proxy solution the new version of samba can look up groups "properly" from AD and cope with this issue, but again something to research a bit. >6) If it's available to you, see if the "virtual LDAP server" stuff in newer AD can help; it might be able to present a "clean" LDAP view of your data >without the Microsoft-isms. I can't remember what this functionality is called, but IIRC it needs Win 2008 (R2?) to use. No idea this existed, I'll have a look into it too. >There are probably more options. But if you really want to store the data in AD, the simplest solution is to change the primary group to a dummy >one that you don't care about. >In some places at our site, we have code that queries all users and flattens nested groups, then resolves primaryGroupId. My advice would be to >avoid that. >Cheers, >Phil Thanks Phil, that's really helpful - thanks again for taking the time to respond. Andy

2 1

Tricky problem with ldap and primary groups in AD
by Franks Andy (RLZ) IT Systems Engineer 02 Aug '12

02 Aug '12

Hi All, I've been searching for half the day and can't find an answer for a question I have. I'm new to freeradius and so far am finding it a rewarding challenge. I have freeradius 2.1.10 up and running, querying AD via ldap and authenticating with ntlm_auth fine. I'm using Ldap-Group checks within the users file to check against the AD groups. The problem I have is that the NAS we're working with (cisco wireless Aps) does both mac address and PEAP-MSCHAPv2 authentication to join the SSID. The PEAP bit works ok, but for the mac address bit the AD administrators set a user up on AD with the mac address but with only one primary group set which dictates the vlan passed back to that particular user on a specific client machine. The Ldap-Group doesn't see the primary group as it's set to do a "memberof" lookup. Other groups are seen fine. There are 3 ways I can see this working : 1) Get the LDAP bods to assign a different primary group and use the other group to dictate vlan membership. We've 5000 odd clients so this isn't my favourite. 2) Check the primarygroupid attribute out by mapping it using ldap.attrmap and attributes in the dictionary file, but then as far as I can tell I can't use these as checkitems within the users file. It's also tedious to have to know the primarygroupIDs for each group. I'd quite like the users file to be the main source of passing radius attributes back to clients, but there may be another way? 3) Something else a bit more clever. I've seen various examples of java / vb.net/php etc ways of taking the primarygroupid, changing it's data type and thus finding the group name, which could then maybe be passed back to the users file. I have absolutely no idea here. Can some please help? Thanks Andy Franks

3 2

RedBack PPPoE Config
by Chris L 02 Aug '12

02 Aug '12

Could someone please share the radius reply items they are returning for the initial ATM PVC authentication from a Redback device that tells it to start up a PPPoE session on the PVC? Thanks much. I'm returning this but I'm never seeing the PPPoE authentication packet from the client router hit RADIUS. Login OK: [rdbacks5p0.0.502] (from client 1928redback port 208496) Sending Access-Accept of id 102 to 209.221.208.5 port 1812 Service-Type = Framed-User PVC_Profile_Name = "1000-384" Bind_Auth_Context = "mycontext" PVC_Encapsulation_Type = AAA-ENCAPS-ATM-PPPOE Bind_Type = AAA-AUTH-BIND -- Chris

1 0