September 2012 - Freeradius-Users - lists.freeradius.org

Commit report for master branch
by a.cudbardb＠freeradius.org 14 Sep '12

14 Sep '12

New activity for FreeRADIUS (the high performance and highly configurable RADIUS server) ======

1 0

Commit report for master branch
by a.cudbardb＠freeradius.org 14 Sep '12

14 Sep '12

New activity for FreeRADIUS (the high performance and highly configurable RADIUS server) ======

1 0

AUTO: Joachim Brauer/Germany/IBM is out of the office (returning 10/01/2012)
by Joachim Brauer 14 Sep '12

14 Sep '12

I am out of the office until 10/01/2012. Nicht im Büro. Post wird >nicht< bearbeitet. Bitte wenden Sie sich in eiligen Fällen an meine LAN Team Kollegen. I am not at my desk. Mail >won't< be checked. In urgent cases please contact my teammates. You are welcome :-) Note: This is an automated response to your message "Freeradius-Users Digest, Vol 89, Issue 48" sent on 14/09/2012 15:48:16. This is the only notification you will receive while this person is away.

1 0

Problem with increasing the cache size in ippool
by ranjan kumar 14 Sep '12

14 Sep '12

Hi All, I am trying to set 65000 cache size but it is giving error. Please help me: ============================================== ippool my_sec_ippool { range-start = 10.160.0.0 range-stop = 10.160.254.254 netmask = 255.255.255.0 cache-size = 65000 session-db = ${raddbdir}/db.ippool1 ip-index = ${raddbdir}/db.ipindex1 override = no maximum-timeout = 0 key = "%{NAS-IP-Address} %{Calling-Station-Id} %{NAS-Port}" } =================================== Error : rlm_ippool: Failed to set cache size Thanks, Regards Ranjan

1 0

Help with 802.1x Certificate
by Tyller D 14 Sep '12

14 Sep '12

Hi all, I would like to use FreeRadius to do 802.1x EAP-PEAP for wireless users. I have everything configured and working when I disabled "validate server Certificate" on windows. I have a wildcard certificate purchased from godaddy.com. I had a problem when using it with apache as I had to add the intermediate chain in the config but can't find a place to do that in FreeRaius. So currently I have 3 files. Private Key Certificate Intermediate Chain When Auth fails because of validation then I get this in Freeradius debug [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Alert [length 0002], fatal access_denied TLS Alert read:fatal:access denied [peap] WARNING: No data inside of the tunnel. [peap] eaptls_process returned 7 Is there something that I can do to get this to work? Regards, Ryan

4 6

EAP-SIM on 2.2.0
by Francois Gaudreault 14 Sep '12

14 Sep '12

Hi, I am playing with EAP-SIM on 2.2.0, but I am facing an issue I cannot even understand :S Not because I don't want to, but the error messages are not talking much. I did compute SRES/Kc for my SIM, but after the third triplet, I just have: rlm_perl: Added pair EAP-Sim-Rand3 = 0xff626ed6104164234aabebecafecafe3 rlm_perl: Added pair EAP-Sim-Rand2 = 0x771634015641aabcd4e5a2a3ab521242 rlm_perl: Added pair EAP-Sim-SRES1 = 0xa0a116fe rlm_perl: Added pair EAP-Sim-SRES2 = 0xc891c365 rlm_perl: Added pair EAP-Sim-KC1 = 0x603c63ecd59340cb rlm_perl: Added pair EAP-Sim-Rand1 = 0xab521824610aca27814bbde2810347a1 rlm_perl: Added pair EAP-Sim-KC3 = 0xa62f0f3aca277041 rlm_perl: Added pair EAP-Sim-KC2 = 0xbdaf3f47b1fc2520 rlm_perl: Added pair EAP-Sim-SRES3 = 0x6daeb494 rlm_perl: Added pair Auth-Type = EAP rlm_perl: Added pair EAP-Type = SIM ++[packetfence] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/pf/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/sim [eap] processing type sim [eap] Handler failed in EAP/sim [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. I am using sim_files to populate the attributes. Anyone can enlight me? By the way, the same config works on 2.1.12 (just tested it): rlm_perl: Added pair EAP-Sim-Rand3 = 0xff626ed6104164234aabebecafecafe3 rlm_perl: Added pair EAP-Sim-Rand2 = 0x771634015641aabcd4e5a2a3ab521242 rlm_perl: Added pair EAP-Sim-SRES1 = 0xa0a116fe rlm_perl: Added pair EAP-Sim-SRES2 = 0xc891c365 rlm_perl: Added pair EAP-Sim-KC1 = 0x603c63ecd59340cb rlm_perl: Added pair EAP-Sim-Rand1 = 0xab521824610aca27814bbde2810347a1 rlm_perl: Added pair EAP-Sim-KC3 = 0xa62f0f3aca277041 rlm_perl: Added pair EAP-Sim-KC2 = 0xbdaf3f47b1fc2520 rlm_perl: Added pair EAP-Sim-SRES3 = 0x6daeb494 rlm_perl: Added pair Auth-Type = EAP rlm_perl: Added pair EAP-Type = SIM ++[packetfence] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/pf/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/sim [eap] processing type sim MAC check succeed [eap] Underlying EAP-Type set EAP ID to 27 [eap] Freeing handler ++[eap] returns ok # Executing section post-auth from file /usr/local/pf/raddb/sites-enabled/packetfence +- entering group post-auth {...} ++[exec] returns noop ++[reply] returns noop } # server packetfence Sending Access-Accept of id 34 to 10.0.0.24 port 1051 Thanks! -- Francois Gaudreault, ing. jr fgaudreault(a)inverse.ca :: +1.514.447.4918 (x130) :: www.inverse.ca Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org)

5 26

building FR3.0 jlibtool problem
by Scott Armitage 13 Sep '12

13 Sep '12

All, is anyone else having problems with using building FR3.0 I get the following: [root@boppity-new freeradius-server]# ./configure --prefix=/usr --with-large-files --with-raddbdir=/etc/raddb --with-experimental-modules --enable-developer | grep WARN configure: WARNING: snmpget not found - Simultaneous-Use and checkrad.pl may not work configure: WARNING: snmpwalk not found - Simultaneous-Use and checkrad.pl may not work configure: WARNING: pcap library not found, silently disabling the RADIUS sniffer. configure: WARNING: silently not building rlm_counter. configure: WARNING: FAILURE: rlm_counter requires: libgdbm. configure: WARNING: FAILURE: rlm_dbm requires: (ndbm.h or gdbm/ndbm.h or gdbm-ndbm.h) (libndbm or libgdbm or libgdbm_compat). configure: WARNING: silently not building rlm_dbm. configure: WARNING: the TNCS library isn't found! configure: WARNING: silently not building rlm_eap_tnc. configure: WARNING: FAILURE: rlm_eap_tnc requires: -lTNCS. configure: WARNING: silently not building rlm_eap_pwd. configure: WARNING: FAILURE: rlm_eap_pwd requires: EC_GROUP_free. configure: WARNING: silently not building rlm_eap_ikev2. configure: WARNING: FAILURE: rlm_eap_ikev2 requires: libeap-ikev2 EAPIKEv2/connector.h. configure: WARNING: silently not building rlm_ippool. configure: WARNING: FAILURE: rlm_ippool requires: libgdbm. configure: WARNING: silently not building rlm_opendirectory. configure: WARNING: FAILURE: rlm_opendirectory requires: membership.h. configure: WARNING: silently not building rlm_pam. configure: WARNING: FAILURE: rlm_pam requires: libpam. configure: WARNING: silently not building rlm_python. configure: WARNING: FAILURE: rlm_python requires: Python.h libpython2.6. configure: WARNING: hiredis libraries not found. Use --with-redis-lib-dir=<path>. configure: WARNING: hiredis headers not found. Use --with-redis-include-dir=<path>. configure: WARNING: silently not building rlm_redis. configure: WARNING: FAILURE: rlm_redis requires: libhiredis hiredis.h. configure: WARNING: hiredis libraries not found. Use --with-redis-lib-dir=<path>. configure: WARNING: hiredis headers not found. Use --with-redis-include-dir=<path>. configure: WARNING: silently not building rlm_rediswho. configure: WARNING: FAILURE: rlm_rediswho requires: libhiredis hiredis.h. configure: WARNING: silently not building rlm_rest. configure: WARNING: FAILURE: rlm_rest requires: curl/curl.h. configure: WARNING: silently not building rlm_ruby. configure: WARNING: FAILURE: rlm_ruby requires: ruby-binary. configure: WARNING: silently not building rlm_sql_postgresql. configure: WARNING: FAILURE: rlm_sql_postgresql requires: libpq-fe.h libpq. configure: WARNING: silently not building rlm_sql_iodbc. configure: WARNING: FAILURE: rlm_sql_iodbc requires: libiodbc isql.h. configure: WARNING: Sqlite libraries not found. Use --with-sqlite-lib-dir=<path>. configure: WARNING: Sqlite headers not found. Use --with-sqlite-include-dir=<path>. configure: WARNING: silently not building rlm_sql_sqlite. configure: WARNING: FAILURE: rlm_sql_sqlite requires: libsqlite3 sqlite.h. configure: WARNING: silently not building rlm_sql_db2. configure: WARNING: FAILURE: rlm_sql_db2 requires: libdb2 sqlcli.h. configure: WARNING: oracle headers not found. Use --with-oracle-include-dir=<path>. configure: WARNING: silently not building rlm_sql_oracle. configure: WARNING: FAILURE: rlm_sql_oracle requires: oci.h. configure: WARNING: silently not building rlm_sql_unixodbc. configure: WARNING: FAILURE: rlm_sql_unixodbc requires: libodbc sql.h. configure: WARNING: silently not building rlm_sql_firebird. configure: WARNING: FAILURE: rlm_sql_firebird requires: libfbclient ibase.h. configure: WARNING: MySQL libraries not found. Use --with-mysql-lib-dir=<path>. configure: WARNING: MySQL headers not found. Use --with-mysql-include-dir=<path>. configure: WARNING: silently not building rlm_sql_mysql. configure: WARNING: FAILURE: rlm_sql_mysql requires: libmysqlclient_r mysql.h. [root@boppity-new freeradius-server]# make Making all in src... Making all in src/include... gmake[4]: Nothing to be done for `all'. Making all in src/lib... CC dict.c gmake[4]: /usr/local/src/freeradius-server/libtool: Command not found gmake[4]: *** [dict.lo] Error 127 gmake[3]: *** [lib] Error 2 gmake[2]: *** [all] Error 2 gmake[1]: *** [src] Error 2 make: *** [all] Error 2 Even if I try: [root@boppity-new freeradius-server]# echo 'BOILER=yes' >> Make.inc [root@boppity-new freeradius-server]# make Making all in src... Making all in src/include... gmake[4]: Nothing to be done for `all'. Making all in src/lib... CC dict.c gmake[4]: /usr/local/src/freeradius-server/libtool: Command not found gmake[4]: *** [dict.lo] Error 127 gmake[3]: *** [lib] Error 2 gmake[2]: *** [all] Error 2 gmake[1]: *** [src] Error 2 make: *** [all] Error 2 Am I being an idiot? Regards Scott Armitage

4 4

how to add two ip pool
by ranjan kumar 13 Sep '12

13 Sep '12

Hi All, I am trying to add two default entries in users file for two ip pool. can it is possible to add two entries of default in users file ? If yes then how ? Please help me its very critical. I have configured two ippool which looks like: =================================================================== In Users file: DEFAULT Auth-Type := aag, Service-Type == Framed-User, Framed-Protocol == 7, Pool-Name := myippool Service-Type == Framed-User, Framed-Protocol == 7, Fall-Through == no, Acct-Interim-Interval = 500 DEFAULT Auth-Type := aag, Service-Type == Framed-User, Framed-Protocol == 7, Pool-Name := my_sec_ippool Service-Type == Framed-User, Framed-Protocol == 7, Acct-Interim-Interval = 500 In radiusd.conf ippool myippool { range-start = 192.168.2.129 range-stop = 192.168.182.254 netmask = 255.255.255.0 cache-size = 800 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = no maximum-timeout = 0 #key = "%{NAS-IP-Address} %{NAS-Port}" } ippool my_sec_ippool { range-start = 192.168.1.1 range-stop = 192.168.182.254 netmask = 255.255.255.0 cache-size = 800 session-db = ${raddbdir}/db.ippool1 ip-index = ${raddbdir}/db.ipindex1 override = no maximum-timeout = 0 #key = "%{NAS-IP-Address} %{NAS-Port}" } ==================================================================== When i am executing ./radiusd -X always getting IPs for only one ggsn. Please help me its very critical. Thanks in Advance. Regards Ranjan

2 1

Problem in configuring multiple IP pool
by ranjan kumar 13 Sep '12

13 Sep '12

Hi, I have created two ip pool in radiusd.conf which looks like below: ======================================================= In radiusd.conf ippool myippool { range-start = 192.168.182.129 range-stop = 192.168.182.254 netmask = 255.255.255.0 cache-size = 800 session-db = ${raddbdir}/db.ippool1 ip-index = ${raddbdir}/db.ipindex1 override = yes maximum-timeout = 0 #key = "%{NAS-IP-Address} %{NAS-Port}" } ippool my_sec_ippool { range-start = 192.168.182.129 range-stop = 192.168.182.254 netmask = 255.255.255.0 cache-size = 800 session-db = ${raddbdir}/db.ippool1 ip-index = ${raddbdir}/db.ipindex1 override = yes maximum-timeout = 0 #key = "%{NAS-IP-Address} %{NAS-Port}" } --------------------------------------------------------------------------------------------------------------- In user updated like below: DEFAULT Auth-Type := aag, Service-Type == Framed-User, Framed-Protocol == 7, Pool-Name := myippool Service-Type == Framed-User, Framed-Protocol == 7, Acct-Interim-Interval = 500 DEFAULT Auth-Type := aag, Service-Type == Framed-User, Framed-Protocol == 7, Pool-Name := my_sec_ippool Service-Type == Framed-User, Framed-Protocol == 7, Acct-Interim-Interval = 500 ======================================================= When I am executing radius server in debug mode i.e ./radiusd -X then getting the below error ======================================================= radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } Module: Linked to module rlm_aag Module: Instantiating module "aag" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/aag aag { integer = 1 boolean = no ipaddr = * } openfile opened /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/data//admin/log/error/startup.log LoggingLevel.conf path...../export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/data//config/logginglevel.conf alarminglevel.conf path...../export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/data//config/alarminglevel.conf Loggerportno conf file path..../export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/data//config/loggerportno.conf } radiusd: #### Loading Virtual Servers #### server { # from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = aag Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/unix unix { radwtmp = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/var/log/radius/radwtmp" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/preprocess preprocess { huntgroups = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/huntgroups" hints = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/files files { usersfile = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/users" acctusersfile = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/acct_users" preproxy_usersfile = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/detail detail { detailfile = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/radutmp radutmp { filename = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server server coa { # from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/sites-enabled/coa modules { Module: Checking recv-coa {...} for more modules to load Module: Linked to module rlm_always Module: Instantiating module "ok" from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/modules/always always ok { rcode = "ok" simulcount = 0 mpp = no } Module: Checking send-coa {...} for more modules to load } # modules } # server server originate-coa.example.com { # from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/sites-available/originate-coa modules { Module: Creating Post-Proxy-Type = Fail-CoA Module: Creating Post-Proxy-Type = Fail-Disconnect Module: Checking pre-proxy {...} for more modules to load Module: Checking post-proxy {...} for more modules to load } # modules } # server WARNING: Server originate-coa.example.com is empty, and will do nothing! server Access_Gateway { # from file /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking accounting {...} for more modules to load /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/radiusd.conf[890]: Failed to load module "myippool". /export/home/lebraaag/ACCESS_GATEWAY/FSS_AAG/RADIUS_STACK/etc/raddb/radiusd.conf[877]: Errors parsing accounting section. ===================================================================================================== Please look into my problem and guide me to come out of this problem. Thanks, Regards Ranjan

2 1

Re: In Access-Request h323-remote-address Multiple times How to get it in SQL query
by Blake Covarrubias 13 Sep '12

13 Sep '12

On Sep 12, 2012, at 11:57 PM, "Ankur - BillCall" <ankur.kalavadia(a)billcall.net> wrote: > We are getting h323-remote-address multiple times. How can I get both attribute in sql query for authentication? > > I set sql_user_name = "%{h323-remote-address}". But I get sql_user_name = Trunk ID (000111) only. How can I get IP XXX.105.4.197? You probably want this. sql_user_name = "%{h323-remote-address[1]}" Read "man unlang". Specifically section "String lengths and arrays". -- Blake Covarrubias

1 0