May 2013 - Freeradius-Users - lists.freeradius.org

SSL error
by David Peterson 31 May '13

31 May '13

I just compiled the master git branch and am getting this error: rlm_eap_tls: Failed initializing SSL context rlm_eap (EAP): Failed to initialise rlm_eap_tls /usr/local/etc/raddb/mods-enabled/eap[17]: Instantiation failed for module "eap" Do you have to manually generate certs for this branch? David

1 0

Radperf - unavailable
by Prashant Abhang 31 May '13

31 May '13

Hi, I was searching for the tool which can help me to test radius server performance. Found radperf, but it seems unavailable to download. Any thoughts? -- Thanks & Regards, Prashant Abhang

1 0

Problems wpa2-tls eap mschapv2 ldap
by Roberto Ortega Ramiro 30 May '13

30 May '13

I have read many times the deployingradius.com guide, i have visit this site many times too. I'm no able to enable wpa_supplicant, but every test with radtest are good i have config freeradius for ldap. I attach the debbug file radiusd -X I have take the file ca.pem in the validation asistan in gnome, i'm using ubuntu. What is wrong? Any idea? Thank you. PD: sorry about my bad inglish, it's posible that my bad english is the reason becouse i'm not able to configure freeradius properly. FreeRADIUS Version 2.1.12, for host x86_64-redhat-linux-gnu, built on Jan 9 2013 at 05:03:12 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.120.0/23 { require_message_authenticator = no secret = "test" shortname = "private-network-2" } client 192.168.202.252 { require_message_authenticator = no secret = "test" shortname = "ldap" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "escuelas" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap ldap { server = "ldap.server" port = 389 password = "passwd" identity = "domineUSer" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=Usuarios,dc=escuelassj" filter = "(uid=%u)" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes keepalive { interval = 3 } } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x2addb70564d0 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 52539 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=177, length=178 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x0201001401636c656d656e74652e626c616e6368 Message-Authenticator = 0x0be07d35efe547bae8a31bfa7dc9b644 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 20 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for clemente.blanch [ldap] expand: (uid=%u) -> (uid=clemente.blanch) [ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to 192.168.200.208:389, authentication 0 [ldap] bind as cn=root,dc=escuelassj/passwd to 192.168.200.208:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=Usuarios,dc=escuelassj, with filter (uid=clemente.blanch) [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0" [ldap] sambaNtPassword -> NT-Password == 0x3130363939383944313338324335343830464532353633374646303236314138 [ldap] sambaLmPassword -> LM-Password == 0x3836333231454630413134313242443441414433423433354235313430344545 [ldap] looking for reply items in directory... [ldap] user clemente.blanch authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 177 to 192.168.202.252 port 46850 EAP-Message = 0x01020016041029ef720b1fc4b5d33ad93db3b7440dd1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324302bd785bc66cf0b8940050 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=178, length=182 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020200060315 State = 0x4300b9324302bd785bc66cf0b8940050 Message-Authenticator = 0x85b25270b6ad4a02c4a441365de04f9b # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for clemente.blanch [ldap] expand: (uid=%u) -> (uid=clemente.blanch) [ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=Usuarios,dc=escuelassj, with filter (uid=clemente.blanch) [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0" [ldap] sambaNtPassword -> NT-Password == 0x3130363939383944313338324335343830464532353633374646303236314138 [ldap] sambaLmPassword -> LM-Password == 0x3836333231454630413134313242443441414433423433354235313430344545 [ldap] looking for reply items in directory... [ldap] user clemente.blanch authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/ttls [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 178 to 192.168.202.252 port 46850 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324203ac785bc66cf0b8940050 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=179, length=403 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020300e3150016030100d8010000d4030151a7502728b223adfd9d1576a726a7311af75bde6d41eb7f51784e34c0cbadf0000066c014c00ac022c0210039003800880087c00fc00500350084c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032009a009900450044c00ec004002f00960041c011c007c00cc002000500040015001200090014001100080006000300ff01000045000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011000f000101 State = 0x4300b9324203ac785bc66cf0b8940050 Message-Authenticator = 0xd439255984d72e6b31e8784decf1ff44 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 227 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] eaptls_verify returned 7 [ttls] Done initial handshake [ttls] (other): before/accept initialization [ttls] TLS_accept: before/accept initialization [ttls] <<< TLS 1.0 Handshake [length 00d8], ClientHello [ttls] TLS_accept: SSLv3 read client hello A [ttls] >>> TLS 1.0 Handshake [length 0031], ServerHello [ttls] TLS_accept: SSLv3 write server hello A [ttls] >>> TLS 1.0 Handshake [length 0855], Certificate [ttls] TLS_accept: SSLv3 write certificate A [ttls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [ttls] TLS_accept: SSLv3 write key exchange A [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [ttls] TLS_accept: SSLv3 write server done A [ttls] TLS_accept: SSLv3 flush data [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 179 to 192.168.202.252 port 46850 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xdea7d32cbbeea4ca1ea4222623aa523a3fb31dfbcdd99dd2ddff2ec555f1b436a3fb30e01c59e2ce5f235123b26a1691444bf9d220f2a7206cf1aff7bd0d9c8424e7a5b0fa4e29e1ebcc41afcbcccddfbd5efff783ff776ee995b9b6e6e0dd6c97baa2b0c75edaa6ec1a299bbbfe0021add88f4d4fcf17502531900ab8daf392faafb104e731e080128f98a55e02e673597bb7167234387c8afd359cbbf8d57d164085228fcd8e0dd3110af0509800e3b2671a157861083aa8df7f8d4170a0ecac11ff0a42050203010001a317301530130603551d25040c300a06082b06010505070301300d06092a864886f70d010105050003820101008a58a5f334 EAP-Message = 0x9ca353f303574f334fc3be5d67ce9f2cc2937c1c7bf0fc0830490530378c7e88951569ff84589ab51f906cc98841ba1c37a610d8f071fca9bddb50dde4d733c212bf0300f9d0002867a8feaf90f6b7fae3603d3f79de4354ceae63e54a9c08a59df6438576961b991178477349830439eb1f2671973c2d7cb3cc2d3ff3aba1cb2c90c1f681928b39307747fa9e59cc49e22feca88b4f57eaafd97180edd0d4304ef5cb494903c0888e7744168d5303dceacf339c061badc5d626faca2a8b0e47b5e22eef3e337e9bcfd51c4ba440755777f061a3460b8e3a9e006a4f9a6021e0c4de48e6f016394cbdfbc764ded630342b6a0efe3c05ef629690e10004 EAP-Message = 0xa5308204a130820389a00302 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324104ac785bc66cf0b8940050 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=180, length=182 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020400061500 State = 0x4300b9324104ac785bc66cf0b8940050 Message-Authenticator = 0xe55d4634e860825f7eed8857971a2223 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...}/ [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] Received TLS ACK [ttls] ACK handshake fragment handler [ttls] eaptls_verify returned 1 [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 180 to 192.168.202.252 port 46850 EAP-Message = 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 EAP-Message = 0x300f0603550407130845736375656c617331133011060355040a130a45736375656c6173534a3121301f06092a864886f70d01090116127469634065736375656c6173736a2e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f7269747930820122300d06092a864886f70d01010105000382010f003082010a0282010100b4038637d9aaab4bc725afe37405268509a155c83ff93ce77ea1009cc5fd8870c1a9da1d80bfdc7425f6a7487822c3cd67b2ce25def5ea1eb92cb9426151aa1af3545aa0ee144e4e8fecfcad2375da868eb97b0c891b53a7b93fb75599171dded6a8103df106aeb3b8d2ba EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x83f82d312c7744ab946edc5e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324005ac785bc66cf0b8940050 Finished request 3. -- -- Un saludo. ____________________ Roberto Ortega Profesor de Informática.

1 0

segmentation fault in rlm_preprocess
by duffy 30 May '13

30 May '13

hi list! today we built from master and we ran into this: Ready to process requests. rad_recv: Access-Request packet from host 172.20.23.31 port 1814, id=193, length=228 NAS-Port-Type = Wireless-802.16 Proxy-State = 0x323231 WiMAX-Available-In-Client = 99 Service-Type = Framed-User WiMAX-BS-ID = 0x303030303230303630313030 WiMAX-Release = "1.1" Message-Authenticator = 0x6149f02200f787d01064d0305effb1ce WiMAX-Accounting-Capabilities = Flow-Based NAS-IP-Address = 172.20.10.121 WiMAX-Hotlining-Capabilities = Hotline-Profile-Id Calling-Station-Id = "0B4E398C5FF7" User-Name = "test@fr3" Event-Timestamp = "May 30 2013 15:42:48 CEST" NAS-Identifier = "A_NAS" WiMAX-GMT-Timezone-offset = 16777216 EAP-Message = 0x022a000d017465737440667233 Attr-26 = 0x000060b5010301 WiMAX-Idle-Mode-Notification-Cap = Supported (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) group authorize { (3) - entering group authorize {...} (3) eap : EAP packet type response id 42 length 13 (3) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (3) [eap] = ok Breakpoint 1, hints_setup (hints=0x9f9790, request=0xaf9870) at src/modules/rlm_preprocess/rlm_preprocess.c:381 381 { Missing separate debuginfos, use: debuginfo-install freeradius-3.0.0-13.el6.x86_64 (gdb) f #0 hints_setup (hints=0x9f9790, request=0xaf9870) at src/modules/rlm_preprocess/rlm_preprocess.c:381 381 { (gdb) info args hints = 0x9f9790 request = 0xaf9870 (gdb) info frame Stack level 0, frame at 0x7fffffffc910: rip = 0x7fffe7b222a0 in hints_setup (src/modules/rlm_preprocess/rlm_preprocess.c:381); saved rip 0x7fffe7b227eb called by frame at 0x7fffffffcd30 source language c. Arglist at 0x7fffffffc900, args: hints=0x9f9790, request=0xaf9870 Locals at 0x7fffffffc900, Previous frame's sp is 0x7fffffffc910 Saved registers: rip at 0x7fffffffc908 (gdb) n 389 request_pairs = request->packet->vps; (gdb) n 391 if (!hints || !request_pairs) (gdb) n 389 request_pairs = request->packet->vps; (gdb) n 391 if (!hints || !request_pairs) (gdb) n 397 name = (tmp = pairfind(request_pairs, PW_USER_NAME, 0, TAG_ANY)) ? (gdb) n 399 if (!name || name[0] == 0) { (gdb) n 421 pairdelete(&add, PW_STRIP_USER_NAME, 0, TAG_ANY); (gdb) n 410 if (((strcmp(i->name, "DEFAULT") == 0) || (strcmp(i->name, name) == 0)) && (gdb) n 411 (paircompare(request, request_pairs, i->check, NULL) == 0)) { (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00007ffff75d4a56 in paircompare (request=0xaf9870, req_list=0xaf9ce0, check=0x9f8fe0, rep_list=0x0) at src/main/valuepair.c:495 495 if (!check_item->da->vendor) switch (check_item->da->attr) { (gdb) info args request = 0xaf9870 req_list = 0xaf9ce0 check = 0x9f8fe0 rep_list = 0x0 (gdb) info frame Stack level 0, frame at 0x7fffffffc8b0: rip = 0x7ffff75d4a56 in paircompare (src/main/valuepair.c:495); saved rip 0x7fffe7b223bb called by frame at 0x7fffffffc910 source language c. Arglist at 0x7fffffffc808, args: request=0xaf9870, req_list=0xaf9ce0, check=0x9f8fe0, rep_list=0x0 Locals at 0x7fffffffc808, Previous frame's sp is 0x7fffffffc8b0 Saved registers: rbx at 0x7fffffffc878, rbp at 0x7fffffffc880, r12 at 0x7fffffffc888, r13 at 0x7fffffffc890, r14 at 0x7fffffffc898, r15 at 0x7fffffffc8a0, rip at 0x7fffffffc8a8 (gdb) print check_item->da $1 = (const DICT_ATTR *) 0x1000003ec (gdb) print check_item->da->vendor Cannot access memory at address 0x1000003f4 (gdb) print check_item->da->attr Cannot access memory at address 0x1000003ec it looks like a bug in src/modules/rlm_preprocess/rlm_preprocess.c but we're not so sure about the resolution; has anyone encountered/solved the same issue? thanks+regards, duffy

2 1

RE: Radclient receives response messages from different source port than destination port of request messages
by rosario.mattera＠accenture.com 30 May '13

30 May '13

Hi Alan, I would like to specify that I'm using radclient as a RADIUS proxy. I reach the RADIUS server through a load balancer. The server uses ports other than 1812 and 1813 in its responses because the matching between requests and responses is done through the Proxy-State attribute. This behavior is implemented in a very famous European Telco operator. In radclient is not implemented any mechanism to support this behavior? Can you confirm that the current implementation of radclient, realizes the matching between requests and responses using also the source port of the responses? Thanks, Rosario -----Original Message----- From: freeradius-users-bounces+rosario.mattera=accenture.com(a)lists.freeradius.org [mailto:freeradius-users-bounces+rosario.mattera=accenture.com@lists.freeradius.org] On Behalf Of Alan DeKok Sent: martedì 28 maggio 2013 18:12 To: FreeRadius users mailing list Subject: Re: Radclient receives response messages from different source port than destination port of request messages rosario.mattera(a)accenture.com wrote: > Thanks Alan for your response. Anyway I can't modify RADIUS server configuration because does not belongs to my domain. Then tell the other RADIUS server to fix his system. > The domain administrator told me that RADIUS server responds using a different source port because of Proxy-State attribute is used in the Access-Request. Nonsense. RADIUS doesn't work like that. > Is there a way to force "radclient" to recognize that response? I have to edit the source files? No. RADIUS doesn't work like that. FreeRADIUS will *never* work like that. It's stupid, broken, and completely wrong. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com

3 3

Freeradius with Protobuf
by Navodit Bhardwaj 30 May '13

30 May '13

Hi I want to use the Google Protobuf for encoding/decoding of FreeRadius request/response. Can someone guide me, how to get it working. -- br, Navodit Bhardwaj Hughes Systique Corporation

3 2

Disable PAP and use only CHAP
by Navodit Bhardwaj 30 May '13

30 May '13

Hi I want to disable PAP and other authenticaiton methods and use only CHAP. Means if user request does not contain CHAP is should be Rejected. I have tried to disable PAP from the modules and /usr/local/etc/raddb/sites-enabled/default, but still the Access is Accepted. how to enable only CHAP?? # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [suffix] No '@' in User-Name = "eala", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry egalqa at line 91 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop WARNING: Please update your configuration, and remove 'Auth-Type = Local' WARNING: Use the PAP or CHAP modules instead. User-Password in the request is correct. # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 13 to 192.168.1.209 port 2788 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 172.16.3.33 Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Filter-Id = "std.ppp" Framed-MTU = 1500 Framed-Compression = Van-Jacobson-TCP-IP Finished request 4. -- br, Navodit Bhardwaj Hughes Systique Corporation

2 2

IP locking with freeradius
by Renan Rodrigues 30 May '13

30 May '13

HI Everyone! There is something I am trying to do with radius and can't find how. (One month googling and nothing done...) What I want is to authenticate my users with their MAC and IP-ADDRESS, so, even if they have root-access to their systems, they can't change their IP-ADDRESS by themselves, because radius is going to reject then. Until now, I have a radius mac-authenticating and working together with dhcpd. I've tried to use ip-pool, that works, but someone still can change ip-address by hand and keep networking.... So, it is possible to work this out? Thanks

3 3

RE: Radclient receives response messages from different source port than destination port of request messages
by rosario.mattera＠accenture.com 28 May '13

28 May '13

OK. Thank you very muck. Rosario -----Original Message----- From: freeradius-users-bounces+rosario.mattera=accenture.com(a)lists.freeradius.org [mailto:freeradius-users-bounces+rosario.mattera=accenture.com@lists.freeradius.org] On Behalf Of Alan DeKok Sent: martedì 28 maggio 2013 18:12 To: FreeRadius users mailing list Subject: Re: Radclient receives response messages from different source port than destination port of request messages rosario.mattera(a)accenture.com wrote: > Thanks Alan for your response. Anyway I can't modify RADIUS server configuration because does not belongs to my domain. Then tell the other RADIUS server to fix his system. > The domain administrator told me that RADIUS server responds using a different source port because of Proxy-State attribute is used in the Access-Request. Nonsense. RADIUS doesn't work like that. > Is there a way to force "radclient" to recognize that response? I have to edit the source files? No. RADIUS doesn't work like that. FreeRADIUS will *never* work like that. It's stupid, broken, and completely wrong. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com

1 0

Quick question about $ variables
by stefan.paetow＠diamond.ac.uk 28 May '13

28 May '13

Hi all, I've been looking at using ${...} variables wherever I can and so far it's been relatively successful. The only place where I am stuck is using some comparisons, e.g. if ("%{Attribute}" == "${variable}") { ... } The Attribute portion expands, the $-variable part does not (although it is in double-quotes as per the unlang documentation). Quoting the literal value of the variable works. Am I correct in saying that this is not supported? Just asking so I know how far I can push this :-) Stefan Paetow Software Engineer +44 1235 778812 Diamond Light Source Ltd. Diamond House, Harwell Science and Innovation Campus Didcot, Oxfordshire, OX11 0DE -- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message. Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom

2 2